ASUS T2 3-IN-1 User Guide

First Edition V1 March 2004
ET1605
T2 3-in-1 Upgrade
User’s Guide
Copyright © 2004 ASUSTeK COMPUTER INC. All Rights Reserved.
No part of this manual, including the products and software described in it, may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any means, except documentation kept by the purchaser for backup purposes, without the express written permission of ASUSTeK COMPUTER INC. (“ASUS”).
Product warranty or service will not be extended if: (1) the product is repaired, modified or altered, unless such repair, modification of alteration is authorized in writing by ASUS; or (2) the serial number of the product is defaced or missing.
ASUS PROVIDES THIS MANUAL “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OR CONDITIONS OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL ASUS, ITS DIRECTORS, OFFICERS, EMPLOYEES OR AGENTS BE LIABLE FOR ANY INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF PROFITS, LOSS OF BUSINESS, LOSS OF USE OR DATA, INTERRUPTION OF BUSINESS AND THE LIKE), EVEN IF ASUS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES ARISING FROM ANY DEFECT OR ERROR IN THIS MANUAL OR PRODUCT.
SPECIFICATIONS AND INFORMATION CONTAINED IN THIS MANUAL ARE FURNISHED FOR INFORMATIONAL USE ONLY, AND ARE SUBJECT TO CHANGE AT ANY TIME WITHOUT NOTICE, AND SHOULD NOT BE CONSTRUED AS A COMMITMENT BY ASUS. ASUS ASSUMES NO RESPONSIBILITY OR LIABILITY FOR ANY ERRORS OR INACCURACIES THAT MAY APPEAR IN THIS MANUAL, INCLUDING THE PRODUCTS AND SOFTWARE DESCRIBED IN IT.
Products and corporate names appearing in this manual may or may not be registered trademarks or copyrights of their respective companies, and are used only for identification or explanation and to the owners’ benefit, without intent to infringe.
2 ASUS T2 3-in-1 Upgrade User’s Guide
Notices
Federal Communications Commission Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
This device may not cause harmful interference, and
This device must accept any interference received including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with manufacturer’s instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
WARNING: Any changes or modifications to this product not expressly approved by the manufacturer could void any assurances of safety or performance and could result in violation of Part 15 of FCC Rules.
Reprinted from the Code of Federal Regulations #47, part 15.193, 1993. Washington DC: Office of the Federal Register, National Archives and Records Administration, U.S. Government Printing Office.
Canadian Department of Communications Statement
This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus set out in the Radio Interference Regulations of the Canadian Department of Communications. This class B digital apparatus complies with Canadian ICES-003.
ASUS T2 3-in-1 Upgrade User’s Guide 3
Contents
Notices .................................................................................................................. 3
1. Welcome! ....................................................................................................... 5
2. Specifications ................................................................................................. 5
3. Package contents .......................................................................................... 6
4. Installing the T2 3-in-1 Upgrade Card ............................................................ 7
5. Installation of devices................................................................................... 10
6. Driver Setup ..................................................................................................11
7. Troubleshooting ............................................................................................ 11
ASUS Contact Information.................................................................................. 12
4 ASUS T2 3-in-1 Upgrade User’s Guide
1. Welcome!
Congratulations on your purchase of an ASUS T2 3-in-1 Upgrade card! This card is efficiently designed to provide a bridge between data-intensive devices and your computer system.
The T2 3-in-1 Upgrade card combines powerful features including a Gigabit LAN controller, an IEEE 802.11b-compliant wireless LAN and an IEEE 1394 controller . The ASUS T2 3-in-1 Upgrade card provides Gigabit LAN, wireless LAN and easy-to-use digital interface for throughput devices such as DV camcorders, digital cameras, DVDs, scanners, and printers.
2. Specifications
3COM Gigabit LAN controller
VIA VT6307 1394 controller
IEEE 802.11b-compliant wireless LAN controller
Real-time data transmission
Two (2) internal 8-pin IEEE 1394 connectors
Seamless I/O interconnect
Hot-pluggable connectors
ASUS T2 3-in-1 Upgrade User’s Guide 5
3. Package contents
Check your T2 3-in-1 package for the following items:
Dipolar antenna
T2 3-in-1 upgrade card
IEEE 1394 signal cables
Front panel I/O sticker
User guide
NOTE:
If any of the following items are damaged or missing, contact your retailer.
6 ASUS T2 3-in-1 Upgrade User’s Guide
4. Installing the T2 3-in-1 Upgrade Card
1. Turn off the system and remove the system cover.
2. Remove possible static discharge by touching a bare metal chassis railing.
3. Identify the available PCI slot and remove the bracket opposite the slot that you will use.
4. Align the card connector with the slot and press firmly until the card is completely seated on the slot.
5. Replace the expansion card lock to secure the card to the chassis.
ASUS T2 3-in-1 Upgrade User’s Guide 7
PCI card
5
4
6. Connect one end of the first IEEE 1394 signal cable to the IEEE 1394 connector labeled IE1394_1 on the 3-in-1 card.
7. Connect one end of the second IEEE 1394 signal cable to the IEEE 1394 connector labeled IE1394_2 on the 3-in-1 card.
8. Connect the other end of the first IEEE 1394 signal cable to the IEEE 1394 connector labeled IE1394_1 on the front panel I/O daughterboard of the Terminator 2 system.
9. Connect the other end of the second IEEE 1394 signal cable to the IEEE 1394 connector labeled IE1394_2 on the front panel I/O daughterboard of the Terminator 2 system.
10. Replace the system cover.
NOTE:
For details on PCI card installation, refer to “Chapter 2: Basic Installation” of the Terminator 2 User Guide.
7
8
6
8 ASUS T2 3-in-1 Upgrade User’s Guide
9
Loading...
+ 16 hidden pages