Asus SABERTOOTH X99 accessory guide

E10097 First Edition February 2015
Copyright © 2015 ASUSTeK COMPUTER INC. All Rights Reserved. No part of this manual, including the products and software described in it, may be reproduced, transmitted,
transcribed, stored in a retrieval system, or translated into any language in any form or by any means, except documentation kept by the purchaser for backup purposes, without the express written permission of ASUSTeK COMPUTER INC. (“ASUS”).
Product warranty or service will not be extended if: (1) the product is repaired, modied or altered, unless such repair, modication of alteration is authorized in writing by ASUS; or (2) the serial number of the product is defaced
or missing. ASUS PROVIDES THIS MANUAL “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS
OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OR CONDITIONS OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL ASUS, ITS DIRECTORS, OFFICERS, EMPLOYEES OR AGENTS BE LIABLE FOR ANY INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF PROFITS, LOSS OF BUSINESS, LOSS OF USE OR DATA, INTERRUPTION OF BUSINESS AND THE LIKE), EVEN IF ASUS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES ARISING FROM ANY DEFECT OR ERROR IN THIS MANUAL OR PRODUCT.
SPECIFICATIONS AND INFORMATION CONTAINED IN THIS MANUAL ARE FURNISHED FOR INFORMATIONAL USE ONLY, AND ARE SUBJECT TO CHANGE AT ANY TIME WITHOUT NOTICE, AND SHOULD NOT BE CONSTRUED AS A COMMITMENT BY ASUS. ASUS ASSUMES NO RESPONSIBILITY OR LIABILITY FOR ANY ERRORS OR INACCURACIES THAT MAY APPEAR IN THIS MANUAL, INCLUDING THE PRODUCTS AND SOFTWARE DESCRIBED IN IT.
Products and corporate names appearing in this manual may or may not be registered trademarks or copyrights of
their respective companies, and are used only for identication or explanation and to the owners’ benet, without
intent to infringe.
2
Contents
Contents ....................................................................................................................... 3
Package contents ........................................................................................................ 4
Installing the assistant fans ....................................................................................... 5
Installing the M.2 card................................................................................................. 6
Installing the Dust Defenders..................................................................................... 7
Installing the DIMM slot covers ....................................................................... 7
Installing the PCIe x16, PCIe x4, and PCIe x1 slot covers ............................. 7
Installing the onboard connector caps ............................................................ 7
Installing the back I/O caps ............................................................................. 8
Installing the Thermistor cable .................................................................................. 9
Contact Information .................................................................................................. 10
3

Package contents

SATA
Express
Check your SABERTOOTH X99 motherboard package for the following items:
1 x Connector cap set
(LAN cap and Front USB 3.0 cap)
4 x DIMM slot covers
9 x SATA connector caps
2 x PCIe x16 slot covers
1 x SATA Express connector cap
1 x PCIe x1 slot cover
2 x Onboard USB 2.0 connector
caps
11 x Back I/O USB
connector caps
5 x Audio connector caps
TUF Connector Dust Defenders package
1 x PCIe x4 slot cover
TUF Accessory package 1 x 40 mm Assistant fan
3 x Thermistor cables Accessory installation guide (this document)
If any of the above items is damaged or missing, contact your retailer.
To support various models, your TUF Connector Dust Defenders package may include
additional onboard connector caps and back I/O port caps.
The illustrated items above are for reference only.
4
Loading...
+ 8 hidden pages