Asus RT-N56U Quick Start Guide [ml]
¨
RT-N56U
Extreme Performance in Style
Dual-band Wireless-N Gigabit Router
Quick Start Guide
ND7823 / First Edition / April 2015
English ............................................................................................................................................................... 3
Dansk ................................................................................................................................................................. 15
Suomi ................................................................................................................................................................. 27
Norsk .................................................................................................................................................................. 39
Svenska ............................................................................................................................................................. 51
Package contents
RT-N56U Wireless Router Network cable
Power adapter Quick Start Guide
Support CD (User Manual/utility software) Warranty card
NOTES:
• If any of the items is damaged or missing, contact ASUS for technical inquiries and
support. Refer to the ASUS Support Hotline list at the back of this guide.
• Keep the original packaging material in case you would need future warranty
services such as repair or replacement.
Hardware features
English
USB LED
1)
2) LAN LED 6) Power LED 10) WAN (Internet) port*
3) WAN LED 7) USB 2.0 ports 11) Power (DC-In) port
4) 5GHz LED 8) Reset button 12) WPS button
13) Power Switch
5) 2.4GHz LED 9) LAN 1 ~ 4 ports*
3
NOTES:
English
• USB External HDD/Flash disk:
• The wireless router works with most USB HDDs/Flash disks up to 2TB and supports
• To safely remove the USB disk, launch the web GUI (http://192.168.1.1), then in
• Incorrect removal of the USB disk may cause data corruption.
• For the list of le system and hard disk partitions that the wireless router supports,
• For the list of printers that the wireless router supports, visit
http://event.asus.com/networks/printersupport
read-write access for FAT16, FAT32, EXT2, EXT3 and NTFS.
the Network Map page > External USB disk status > Safely Remove disk eld, click
Remove.
visit http://event.asus.com/networks/disksupport
4
Positioning your wireless router
For the best wireless signal transmission between the wireless router and the network
devices connected to it, ensure that you:
• Place the wireless router in a centralized area for a maximum wireless coverage for the
network devices.
• Keep the device away from metal obstructions and away from direct sunlight.
• Keep the device away from 802.11g or 20MHz only Wi-Fi devices, 2.4GHz computer
peripherals, Bluetooth devices, cordless phones, transformers, heavy-duty motors,
uorescent lights, microwave ovens, refrigerators, and other industrial equipment to
prevent signal interference or loss.
• For the best front-to-rear coverage, place the wireless router in an upright position.
• For the best up-and-down coverage, place the wireless router in an inclined position.
• Always update to the latest rmware. Visit the ASUS website at
http://www.asus.com to get the latest rmware updates.
English
5
Before you proceed
1. Unplug and disconnect the wires/cables from your existing modem setup.
English
Modem
a
b
WARNING! Ensure that your cable/ADSL modem has been turned off for at least two
minutes.
a: Unplug the AC adapter from the power outlet and disconnect it from your cable/ADSL
modem.
b: Disconnect the network cable from your cable/ADSL modem.
2. Set up your wireless environment.
d
Modem
a
b
c
a: Insert your wireless router’s AC adapter to the DC-In port and plug it to a power outlet.
b: Using the network cable, connect your computer to your wireless router’s LAN port.
6
c: Using another network cable, connect your modem to your wireless router’s WAN
port.
d: Insert your modem’s AC adapter to the DC-In port and plug it to a power outlet.
3. Disable some settings on your computer.
A. Disable the proxy server, if enabled.
B. Set the TCP/IP settings to automatically obtain an IP address.
C. Disable the dial-up connection, if enabled.
NOTE: For more details on disabling your computer settings, refer to Frequently
Asked Questions (FAQs).
English
7
Getting started
1. Congure your wireless settings via the wireless router’s web graphics user inter-
English
face (web GUI).
a: Launch your web browser such as Internet Explorer, Firefox, Google Chrome, or
Safari.
a
NOTE: If QIS does not launch automatically, follow these steps to manually launch
QIS:
• On your web browser, key in http://192.168.1.1 and run the Quick Internet Setup
(QIS) Wizard again.
• Disable the proxy settings, dial-up connection, and set your TCP/IP settings to
automatically obtain an IP address. For more details, refer to the FAQs section or
use the Setup Wizard in the support CD for auto-diagnosis.
b: The wireless router’s Quick Internet Setup (QIS) feature automatically detects if your
ISP connection type is Dynamic IP, PPPoE, PPTP, L2TP, and Static IP. Key in the
necessary information for your connection type.
NOTE: The auto-detection of your ISP connection type takes place when you
congure the wireless router for the rst time or when your wireless router is reset to
its default settings.
IMPORTANT! Obtain the necessary information about your Internet connection type
from your Internet Service Provider (ISP).
8
b
c: Assign the network name (SSID) and
security key for your 2.4GHz and 5GHz
wireless connection. Click Apply when
done.
d: Your Internet and wireless settings are
displayed. Click Next to continue.
e: Read the wireless network connection
tutorial. When done, click Finish.
NOTE: You can assign a network name with up to 32 characters.
Frequently Asked Questions (FAQs)
After following the steps, I still cannot access the wireless router’s web graphics user interface
(web GUI) to congure the wireless router settings.
A. Disable the proxy server, if enabled.
Windows® 7
1. Click Start > Internet Explorer to launch the web brows-
er.
2. Click Tools > Internet options > Connections tab > LAN
settings.
English
9
3. From the Local Area Network (LAN) Settings screen,
untick Use a proxy server for your LAN.
4. Click OK when done.
English
MAC OS
1. From your Safari browser, click Safari > Preferences
> Advanced > Change Settings...
2. From the Network screen, deselect FTP Proxy and
Web Proxy (HTTP).
3. Cllick Apply Now when done.
NOTE: Refer to your browser's help feature for details on disabling the proxy server.
B. Set the TCP/IP settings to automatically obtain an IP address.
Windows® 7
1. Click Start > Control Panel > Network and Internet
> Network and Sharing Center > Manage network
connections.
2. Select Internet Protocol Version 4 (TCP/IPv4), then
click Properties.
10
3. To obtain the iPv4 IP settings automatically, tick Obtain an IP address automatically.
4. Click OK when done.
MAC OS
1. Click the Apple icon
screen.
2. Click System Preferences > Network > Cong-
ure...
3. From the TCP/IP tab, select Using DHCP in the Congure IPv4 dropdown list.
4. Cllick Apply Now when done.
NOTE: Refer to your operating system’s help and support feature for details on
conguring your computer’s TCP/IP settings.
located on the top left of your
English
11
C. Disable the dial-up connection, if enabled.
Windows® 7
1. Click Start > Internet Explorer to launch the browser.
English
2. Click Tools > Internet options > Connections tab.
3. Tick Never dial a connection.
4. Click OK when done.
NOTE: Refer to your browser's help feature for details on disabling the dial-up
connection settings.
D. Close all running web browsers.
The client cannot establish a wireless connection with the router.
Out of Range:
• Put the router closer to the wireless client.
• Try to change the channel settings.
Authentication:
• Use wired connection to connect to the router.
• Check the wireless security settings.
• Press the Reset button at the rear panel for more than ve seconds.
12
Cannot nd the router:
• Press the Reset button at the rear panel for more than ve seconds.
• Check the setting in the wireless adapter such as SSID and encryption settings.
Cannot access the Internet via wireless LAN adapter.
• Move the router closer to the wireless client.
• Check whether the wireless adapter is connected to the correct wireless router.
• Check whether the wireless channel in use conforms to the channels available in your
country/area.
• Check the encryption settings.
• Check if the ADSL or Cable connection is correct.
• Retry using another Ethernet cable.
If the ADSL “LINK” light blinks continuously or stays o, Internet access is not possible - the
Router is unable to establish a connection with the ADSL network.
• Ensure that all your cables are all properly connected .
• Disconnect the power cord from the ADSL or cable modem, wait a few minutes, then
reconnect the cord.
• If the ADSL light continues to blink or stays OFF, contact your ADSL service provider.
Network name or encryption keys are forgotten.
• Try setting up the wired connection and conguring the wireless encryption again.
• Press the Reset button of the wireless router for more than ve seconds.
• Factory default settings:
User name / Password:
admin / admin
IP address:
192.168.1.1
SSID: ASUS
English
13
Where can I nd more information about the wireless router?
• User Manual in the support CD
• Online FAQ site: http://support.asus.com/faq
English
• Technical Support site: http://support.asus.com
• Customer Hotline: Refer to the Support Hotline in this Quick Start Guide
SUPPORT HOTLINE
Area Hotline Number Support
Languages
USA/
Canada
Brazil 4003 0988 (Capital) Portuguese
1-812-282-2787 English Mon. to Fri.
0800 880 0988
8:30-12:00am EST
(5:30am-9:00pm PST)
Sat. to Sun.
9:00am-6:00pm EST
(6:00am-3:00pm PST)
Mon. to Fri.
9:00am-
(demais localidades)
Availability
18:00
14
Pakkens indhold
RT-N56U Netværkskabel
AC adapter Kvikstartguide
Support-cd (med brugervejledning/værktøjer) Garantibevis
BEMÆRK:
• Du bedes venligst kontakte din forhandler, hvis nogen af delene mangler eller er
beskadiget.
Hardwarefunktioner
Dansk
USB LED
1)
2) LAN LED 6) Strøm LED 10) WAN (Internet) port*
3) WAN LED 7)
4) 5GHz LED 8)
Afbryderknappen
13)
5) 2.4GHz LED 9) LAN 1 ~ 4 porte*
USB 2.0 porte*
Nulstillingsknap
Strømstik (DC-indgang)
11)
12) WPS knap
15
BEMÆRKINGER:
Dansk
• USB ekstern HDD/Flashdrev:
• Den trådløse router virker med de este USB HDD/Flashdrev (op til 2TB i
• For sikker ernelse af USB-disken, skal du starte internetgrænseade
• Fjernes USB drevet på en forkert måde, kan det medfølge ødelæggelse af data.
• For at se en liste over hvilke lsystemer og hardiskpartitioner, som den trådløse
• For at se en liste over hvilke printere, som den trådløse router understøtter, bedes
størrelse), og understøtter læs-skriv adgang på FAT16, FAT32, EXT2, EXT3 og
NTFS.
(http://192.168.1.1), øverst til højre på siden Network Map (Netværkskort),
klik på
USB-ikonet og klik herefter på Eject USB 1 (Fjern USB 1).
router understøtter, bedes du venligst besøge http://event.asus.com/
networks/disksupport
du venligst besøge
http://event.asus.com/networks/printersupport
16
Placering af din router
For at opnå den bedste trådløse signaloverførsel mellem den trådløse router og netværksenhederne, som er forbundet til den, skal du søre for at:
• Stil den trådløse router på et centralt sted for, at få størst trådløs dækning til netværksenhederne.
• Hold enheden væk fra metalforhindringer, og væk fra direkte sollys.
• Hold enheden væk fra Wi-Fi enheder, der kun kører på 802.11g eller 20MHz, 2,4GHz
computerudstyr, Bluetooth enheder, trådløse telefoner, transformatorer, kraftige motorer, fluorescerende lys, mikrobølgeovne, køleskab og andet industriudstyr for, at
forhindre forstyrrelser eller signaltab.
• For at opnå den bedste dækning fra den ene ende til den anden, skal du stille din trådløse
router op.
• For at opnå den bedste dækning fra mellem etager, skal du stille din trådløse router på
skrå.
•
Sørg altid for, at opdatere til den nyeste rmware. Besøg ASUS' hjemmeside på http://
www.asus.com for, at hente de seneste rmwareopdateringer.
Dansk
17
Før du fortsætter
1. Tag stikkene til ledningerne/kablerne ud af dit nuværende modem
Dansk
Modem
a
b
ADVARSEL! Sørg for, at dit kabel/ADSL modem har været slukket i mindst to minutter.
a: Træk stikket ud af stikkontakten, og træk stikket ud af dit kabel/ADSL modem.
b: Træk netværkskablet ud af dit kabel/ADSL modem.
2. Opsætning af dit trådløst miljø.
d
Modem
a
b
c
a: Slut den ene ende af el-ledningen til DC-in stikket, og den anden til en stikkontakt.
b: Hvis du bruger en netværkskabel, skal du forbinde din computer til LAN porten på din
trådløse router.
18
c: Hvis du bruger en anden netværkskabel, skal du forbinde dit modem til WAN porten
på din trådløse router.
d: Slut den ene ende af el-ledningen til DC-in stikket på modemmet, og den anden til en
stikkontakt.
3. Deaktiver nogle indstillinger på din computer.
A. Deaktiver proxyserveren, hvis den er aktiveret.
B. Indstil TCP/IP indstillingerne til at hente en IP-adresse automatisk.
C. Deaktiver opkaldsforbindelsen, hvis den er aktiveret.
BEMÆRK: For yderligere oplysninger om deaktivering af dine computerindstill-
inger, bedes du venligst se Ofte stillede spørgsmål (FAQ).
Dansk
19
Kom godt i gang
Dansk
1.
Kongurer dine trådløse indstillinger via den graske brugergrænseade
på internettet (web GUI).
a: Start din internetbrowser, såsom Internet Explorer, Firefox, Google Chrome eller
Safari.
a
BEMÆRK: Hvis QIS ikke starter automatisk, bedes du følge disse trin for at starte
den manuelt:
• Indtast http://192.168.1.1 i din internetbrowser, og kør installationsguiden til den
hurtige internetopsættelse (QIS) igen.
• Deaktiver proxyindstillingerne, opkaldsforbindelsen og sæt dine TCP/IP-indstillinger til at hente en IP-adresse automatisk. For yderligere oplysninger, bedes du
venligst se Ofte stillede spørgsmål (FAQ).
gen på support-cd'en for at få en diagnose automatisk.
b: Den hurtige internetopsæting (QIS) nder automatisk din
ISP-forbindelsestype, som enten kan være Dynamic IP (Dynamisk IP), PPPoE, PPTP,
L2TP eller Static IP (Statisk IP). Indtast de nødvendige oplysninger til din forbindelsestype.
BEMÆRK: Den automatisk identikation af din ISP-forbindelsestype nder sted, når
du kongurer din trådløse router for første gang, samt hvis du nulstiller routeren til
den standardindstillinger.
VIGTIGT! Få de nødvendige oplysninger om din
internetforbindelsestype hos din internetudbyder (ISP).
20
afsnittet, eller brug opsætningsvejlednin-
b
c: Tildel netværksnavnet (SSID), og sik-
kerhedsnøglen til din 2,4GHz og 5GHz
trådløse forbindelse. Klik på Apply
(anvend) når du er færdig.
d: Herefter vises dine
internet- og trådløse
indstillinger. Klik på Next (Næste) for at
fortsætte.
e: Læs guiden vedrørende den trådløse
netværksforbindelse. Klik på Finish
(udfør), når du er færdig.
BEMÆRK: Du kan tildele et netværksnavn på op til 32 tegn.
Ofte stillede spørgsmål (FAQ)
Når jeg har gennemgået trinnene, er det stadig ikke muligt for mig, at åbne
internetgrænseaden (web GUI), hvor jeg kan kongurere indstillingerne på den trådløse
router.
A. Deaktiver proxyserveren, hvis den er aktiveret.
Windows® 7
1. Klik på Start > Internet Explorer for, at starte internetbrowseren.
2. Klik på Tools (Funktioner) > Internet options (Inter-
netindstillinger) > Connections (Forbindelser) fane >
LAN settings (LAN indstillinger).
Dansk
21
Loading...