Asus MW250 User's Manual

ASUS MW Series

Wireless Smart Plug

User Manual

A12196

First Edition

February 2017

Product specifications

Wireless		ZigBee PRO
Operation Range		100 m (without obstruction)
Operation Interface		ZigBee button; Power button
LED Indicator		White for power button
		Blue for ZigBee button
		Blue for over current protection
Operating Voltage /		MW250: 250VAC, 13A
		MW500: 240VAC, 8A
Over Current Protection		(refer to input/output rating
		information for more details)
Operating Temperature		0~40°C
Operating Humidity		0~90%

NOTE: Specifications subject to change without notice.

Technical support

This manual is a guide for setting up your device for the first time only. Actual product content and app screen may vary per firmware and updates. Please refer to the ASUS support site for more information:

2

Product overview

Power button with ON/OFF LED indicator

Press this button to turn the ASUS MW Series Wireless Smart Plug on or off. The LED turns white when the ASUS MW Series Wireless Smart Plug is turned on.

Protected LED indicator (on selected models)

This LED indicator will light up when the over current protection functions normally.

NOTE: If this LED indicator does not light up, turn the ASUS MW Series Wireless Smart Plug off and on again. If the incident continues, consult an authorized ASUS service center.

3

Power socket

Power socket may vary in appearance, depending on models and your region.

ZigBee LED indicator

Refer to the following table for details on the LED status indicator:

	Color	Status	Description
		Device powering on	Lights up for 1 second
	Solid Blue	Disconnecting with	Press and hold the
			ZigBee button for 5
		home gateway
			seconds
		Identifying device	Lights up for 5 seconds
	Blinking Blue	Connecting with	Press the ZigBee
			button to connect with
		home gateway	home gateway

ZigBee button

Press to connect with home gateway. Press and hold for 5 seconds to reset the device.

NOTE: Ensure to reset your ASUS Smart Home device and delete the device from the companion app to remove it completely.

Power plug

Power plug may vary in appearance, depending on models and your region.

4

System requirements

•Three-prong outlet. DO NOT remove the ground prong.

•iOS or Android smartphone.

•Wi-Fi router with Internet access.

•Asus SmartHome gateway and SmartHome user account.

Safety tips

•DO NOT use this device for air conditioners, fridges, ovens or other high power consumption electrical appliances.

•Check the power rating on your electrical appliances before using it with this device.

•DO NOT connect power strips to this device.

•DO NOT attempt to repair the product yourself.

•Minimize the exposure to moisture including wet hands and direct contact with liquids.

•Use soft, dry cloth to clean and avoid cleaning with water, alcohol or other chemicals.

Installing ASUS SmartHome app

•This device can be set up and operated though the companion app. Search for ASUS SmartHome and download the companion app through the Apple App Store or Google Play.

•Ensure you have Internet connection before downloading.

•Ensure your smartphone is connected to your router before setting up.

ASUS

SmartHome

Refer to a qualified vendor or the ASUS website for the minimum system requirements.

5

Getting started

Connecting to your HG 100

1.Launch the ASUS SmartHome APP.

2.Tap on the main page of Home Control to add devices for the home gateway.

3.Tap Add Device to join your ASUS SmartHome device to the SmartHome Gateway.

4.Press the ZigBee button on your ASUS Smart Home device to add the device.

NOTE: After tapping Add Device, you can press the

ZigBee button on all your ASUS Smart Home devices to add them all at once.

6

5.Tap Done once all the devices are added to complete.

NOTE:

•Ensure the ASUS MW Series Wireless Smart Plug is plugged to a power source before connecting. Refer to the LED indicator to check the status of your device.

•Ensure that your device is within 100 meters of your ASUS SmartHome Gateway, and there are no obstructions such as thick solid walls or other electronic devices that may cause interference.

•The LED status indicator on your ASUS SmartHome Gateway will blink blue for sixty (60) seconds to indicate that devices can be added.

•Ensure to reset your ASUS Smart Home device and delete the device from the companion app to remove it completely.

Additional information

•This device is set to OFF by default.

•This device will update data to the Home Gateway every 10 minutes. You can view the data through the companion app.

•When this device loses power, the companion app will display a gray icon and cannot be configured. The status will be updated every 10 minutes.

7

		ZigBee PRO
		100
		ZigBee
	LED	ZigBee
	/	MW250: 250VAC, 13A
		MW500: 240VAC, 8A
		/
		0~40
		0~90%

8

ON/OFF LED

MW MW

LED

LED

MW

助。

9