Asus H410M-C User Manual
Pro H410M-C
Motherboard
E16640
First Edition
April 2020
Copyright © 2020 ASUSTeK COMPUTER INC. All Rights Reserved.
No part of this manual, including the products and software described in it, may be reproduced,
transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any
means, except documentation kept by the purchaser for backup purposes, without the express written
permission of ASUSTeK COMPUTER INC. (“ASUS”).
Product warranty or service will not be extended if: (1) the product is repaired, modied or altered, unless
such repair, modication of alteration is authorized in writing by ASUS; or (2) the serial number of the
product is defaced or missing.
ASUS PROVIDES THIS MANUAL “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS
OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OR CONDITIONS OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL ASUS, ITS
DIRECTORS, OFFICERS, EMPLOYEES OR AGENTS BE LIABLE FOR ANY INDIRECT, SPECIAL,
INCIDENTAL, OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF PROFITS,
LOSS OF BUSINESS, LOSS OF USE OR DATA, INTERRUPTION OF BUSINESS AND THE LIKE),
EVEN IF ASUS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES ARISING FROM ANY
DEFECT OR ERROR IN THIS MANUAL OR PRODUCT.
SPECIFICATIONS AND INFORMATION CONTAINED IN THIS MANUAL ARE FURNISHED FOR
INFORMATIONAL USE ONLY, AND ARE SUBJECT TO CHANGE AT ANY TIME WITHOUT NOTICE,
AND SHOULD NOT BE CONSTRUED AS A COMMITMENT BY ASUS. ASUS ASSUMES NO
RESPONSIBILITY OR LIABILITY FOR ANY ERRORS OR INACCURACIES THAT MAY APPEAR IN THIS
MANUAL, INCLUDING THE PRODUCTS AND SOFTWARE DESCRIBED IN IT.
Products and corporate names appearing in this manual may or may not be registered trademarks or
copyrights of their respective companies, and are used only for identication or explanation and to the
owners’ benet, without intent to infringe.
Offer to Provide Source Code of Certain Software
This product contains copyrighted software that is licensed under the General Public License (“GPL”),
under the Lesser General Public License Version (“LGPL”) and/or other Free Open Source Software
Licenses. Such software in this product is distributed without any warranty to the extent permitted by the
applicable law. Copies of these licenses are included in this product.
Where the applicable license entitles you to the source code of such software and/or other additional data,
you may obtain it for a period of three years after our last shipment of the product, either
(1) for free by downloading it from https://www.asus.com/support/
or
(2) for the cost of reproduction and shipment, which is dependent on the preferred carrier and the location
where you want to have it shipped to, by sending a request to:
ASUSTeK Computer Inc.
Legal Compliance Dept.
1F., No.15, Lide Rd.,
Beitou Dist., Taipei City 112
Taiwan
In your request please provide the name, model number and version, as stated in the About Box of the
product for which you wish to obtain the corresponding source code and your contact details so that we
can coordinate the terms and cost of shipment with you.
The source code will be distributed WITHOUT ANY WARRANTY and licensed under the same license as
the corresponding binary/object code.
This offer is valid to anyone in receipt of this information.
ASUSTeK is eager to duly provide complete source code as required under various Free Open Source
Software licenses. If however you encounter any problems in obtaining the full corresponding source
code we would be much obliged if you give us a notication to the email address gpl@asus.com, stating
the product and describing the problem (please DO NOT send large attachments such as source code
archives, etc. to this email address).
ii
Contents
Safety information ...................................................................................................... iv
About this guide .......................................................................................................... v
Package contents ....................................................................................................... vi
Pro H410M-C specications summary ..................................................................... vi
Connectors with shared bandwidth ......................................................................... ix
Chapter 1 Product introduction
1.1 Before you proceed ...................................................................................... 1-1
1.2 Motherboard overview ................................................................................. 1-1
1.3 Central Processing Unit (CPU) .................................................................... 1-8
1.4 System memory ............................................................................................ 1-9
Chapter 2 BIOS information
2.1 BIOS setup program ..................................................................................... 2-1
2.2 BIOS menu screen........................................................................................ 2-2
2.3 Event Log ...................................................................................................... 2-3
2.4 Exit menu ...................................................................................................... 2-4
Appendix
Notices ..................................................................................................................... A-1
ASUS contact information ...................................................................................... A-6
iii
Safety information
Electrical safety
• To prevent electrical shock hazard, disconnect the power cable from the electrical outlet
before relocating the system.
• When adding or removing devices to or from the system, ensure that the power cables
for the devices are unplugged before the signal cables are connected. If possible,
disconnect all power cables from the existing system before you add a device.
• Before connecting or removing signal cables from the motherboard, ensure that all power
cables are unplugged.
• Seek Professional assistance before using an adapter or extension cord. These devices
could interrupt the grounding circuit.
• Ensure that your power supply is set to the correct voltage in your area. If you are not
sure about the voltage of the electrical outlet you are using, contact your local power
company.
• If the power supply is broken, do not try to x it by yourself. Contact a qualied service
technician or your retailer.
Operation safety
• Before installing the motherboard and adding components, carefully read all the manuals
that came with the package.
• Before using the Product, ensure all cables are correctly connected and the power
cables are not damaged. If you detect any damage, contact your dealer immediately.
• To avoid short circuits, keep paper clips, screws, and staples away from connectors,
slots, sockets and circuitry.
• Avoid dust, humidity, and temperature extremes. Do not place the Product in any area
where it may be exposed to moisture.
• Place the Product on a stable surface.
• If you encounter technical Problems with the Product, contact a qualied service
technician or your retailer.
• Your motherboard should only be used in environments with ambient temperatures
between 0°C and 40°C.
iv
About this guide
This user guide contains the information you need when installing and conguring the
motherboard.
How this guide is organized
This guide contains the following parts:
• Chapter 1: Product introduction
This chapter describes the features of the motherboard and the new technology it
supports. It includes descriptions of the switches, jumpers, and connectors on the
motherboard.
• Chapter 2: BIOS information
This chapter tells how to boot into the BIOS.
Where to nd more information
Refer to the following sources for additional information and for Product and software
updates.
1. ASUS website
The ASUS website Provides updated information on ASUS hardware and software
Products. Refer to the ASUS contact information.
2. Optional documentation
Your Product package may include optional documentation, such as warranty yers,
that may have been added by your dealer. These documents are not part of the
standard package.
Conventions used in this guide
To ensure that you perform certain tasks Properly, take note of the following symbols used
throughout this manual.
CAUTION: Information to prevent damage to the components and injuries to
yourself when trying to complete a task.
IMPORTANT: Instructions that you MUST follow to complete a task.
NOTE: Tips and additional information to help you complete a task.
v
Package contents
Check your motherboard package for the following items.
Motherboard
Cables
Miscellaneous
Application DVD
Documentation
If any of the above items is damaged or missing, contact your retailer.
1 x Pro H410M-C motherboard
2 x SATA 6Gb/s cables
1 x I/O Shield
1 x M.2 SSD screw package
1 x Support DVD
1 x User manual
Pro H410M-C specications summary
Intel® Socket LGA1200 for 10th Gen Intel® Core™, Pentium® Gold and
Celeron® Processors*
Supports Intel® 14nm CPU
CPU
Chipset Intel® H410 Chipset
Memory
Graphics
Expansion Slots
Storage
Supports Intel® Turbo Boost Technology 2.0 and Intel® Turbo Boost Max
Technology 3.0**
*Refer to www.asus.com for CPU support list.
®
**Intel
Turbo Boost Max Technology 3.0 support depends on the CPU types.
2 x DIMM, Max. 64GB, DDR4 2933/2800/2666/2400/2133 MHz Non-ECC,
Un-buffered Memory*
Dual Channel Memory Architecture
Supports Intel® Extreme Memory Prole (XMP)
OptiMem
* For 10th Gen Intel® Processors, only Core™ i9/i7 CPUs support
2933/2800/2666/2400/2133 natively, others will run at the maximum transfer rate
of DDR4 2666MHz.
* Refer to www.asus.com for the Memory QVL (Qualied Vendors Lists).
1 x D-Sub
1 x DVI-D
1 x HDMITM 1.4b
*Graphics specications may vary between CPU types.
Intel® 10th Gen Processors
1 x PCIe 3.0 x16 slot (supports x16 mode)
Intel® H410 Chipset
1 x PCIe 3.0 x1 slot
2 x PCI slots
Total supports 1 x M.2 slot and 4 x SATA 6Gb/s ports
Intel® H410 Chipset
M.2 slot (Key M), type 2242/2260/2280 (supports PCIe 3.0 x2 & SATA
modes)*
4 x SATA 6Gb/s ports
* When a device in SATA mode is installed on the M.2 socket, SATA6G_2 port
cannot be used.
(continued on the next page)
vi
Pro H410M-C specications summary
Ethernet
USB
Audio
Back Panel I/O Ports
Internal I/O
Connectors
1 x Intel® I219-V 1Gb Ethernet
ASUS LANGuard
Rear USB (Total 4 ports)
2 x USB 3.2 Gen 1 ports (2 x Type-A)
2 x USB 2.0 ports (2 x Type-A)
Front USB (Total 6 ports)
1 x USB 3.2 Gen 1 header supports additional 2 USB 3.2 Gen 1 ports
2 x USB 2.0 headers support additional 4 USB 2.0 ports
Realtek ALC887 7.1-Channel High Denition Audio CODEC*
- Jack-detection, Multi-streaming, Front Panel Jack-retasking
- Supports up to 24-Bit/192kHz playback
* A chassis with an HD audio module in the front panel is required to support
7.1-channel audio output.
2 x USB 3.2 Gen 1 ports (2 x Type-A)
2 x USB 2.0 ports (2 x Type-A)
1 x D-Sub port
1 x DVI-D port
1 x HDMITM port
1 x Intel® I219-V 1Gb Ethernet
3 x Audio jacks
1 x COM port
1 x PS/2 keyboard (purple) port
1 x PS/2 mouse (green) port
Fan and cooling related
1 x 4-pin CPU Fan header
1 x 4-pin Chassis Fan header
Power related
1 x 24-pin Main Power connector
1 x 8-pin +12V Power connector
Storage related
1 x M.2 slot (Key M)
4 x SATA 6Gb/s ports
USB
1 x USB 3.2 Gen 1 header supports additional 2 USB 3.2 Gen 1 ports
2 x USB 2.0 headers support additional 4 USB 2.0 ports
Miscellaneous
1 x Clear CMOS header
1 x Chassis Intrude header
1 x COM Port header
1 x Front Panel Audio header (AAFP)
1 x LPC Debug header
1 x LPT header
1 x Speaker header
1 x SPI TPM header (14-1 pin)
1 x 10-1 System Panel header
(continued on the next page)
vii
Pro H410M-C specications summary
ASUS EZ DIY
- Box Headers
Bespoke Motherboard Design & Business Focused Features :
Special Features
BIOS 128 Mb Flash ROM, UEFI AMI BIOS
Manageability WOL by PME, PXE
Operating System Windows® 10 - 64 bit
Form Factor
Specications are subject to change without notice.
- ASUS Self Recovering BIOS
- ASUS Event Log
- ASUS Commercial BIOS kit
- Anti-Moisture
- 24/7 Reliability
- Overcurrent Protection
mATX Form Factor
9.6 inch x 8.2 inch (24.4 cm x 20.8cm)
viii
Connectors with shared bandwidth
KBMS
USB78
DVI
HDMI
COM1
LAN_U32G1_34
AUDIO
Super
I/O
ALC
887
AAFP
VGA
Intel
I219-V
CHA_FAN
®
PCIEX1
COM2
EATX12V
2280 2260 2242
PCIEX16
PCI_1
PCI_2
CHASSIS
LPT
ASM
1083
LPC_DEBUG
DIGI
+VRM
LGA1200
BATTERY
USB910
CPU_FAN
M.2(SOCKET3)
128Mb
BIOS
TPM
DDR4 DIMM_B1* (64bit, 288-pin module)
DDR4 DIMM_A1* (64bit,288-pin module)
X
X2 V
M.2(SOCKET3)
PCIE SATA IRST
®
Intel
H410
SATA6G_4
SATA6G_3
SATA6G_2
A
EATXPWR
U32G1_12
SATA6G_1
USB56
SPEAKER
F_PANEL
A
CLRTC
Conguration 1 2
M.2 x2 SATA
A
SATA6G_2 V -
• When a device in SATA mode is installed on the M.2 socket, SATA6G_2 port cannot
be used.
• M.2 shares bandwidth with SATA6G_2.
ix
Loading...