Asus CM6340 User Manual [en, de, es, fr, it]

Page 1
Index
English ............................................................................1
Deutsch.........................................................................71
Français ...................................................................... 141
Italiano ........................................................................209
Español .......................................................................281
Nederlands .................................................................351
Português ...................................................................421
Ελληνικά ..................................................................... 491
Page 2
Page 3
ASUS Essentio Desktop PC
CM6340
User Manual
Page 4
E7503 First Edition
June 2012
Copyright © 2012 ASUSTeK Computer Inc. All Rights Reserved.
No part of this manual, including the products and software described in it, may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any means, except documentation kept by the purchaser for backup purposes, without the express written permission of ASUSTeK Computer Inc. (“ASUS”).
Product warranty or service will not be extended if: (1) the product is repaired, modied or altered, unless such repair, modication of alteration is authorized in writing by ASUS; or (2) the serial number of the
product is defaced or missing. ASUS PROVIDES THIS MANUAL “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS
OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OR CONDITIONS OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL ASUS, ITS DIRECTORS, OFFICERS, EMPLOYEES OR AGENTS BE LIABLE FOR ANY INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF PROFITS, LOSS OF BUSINESS, LOSS OF USE OR DATA, INTERRUPTION OF BUSINESS AND THE LIKE), EVEN IF ASUS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES ARISING FROM ANY DEFECT OR ERROR IN THIS MANUAL OR PRODUCT.
SPECIFICATIONS AND INFORMATION CONTAINED IN THIS MANUAL ARE FURNISHED FOR INFORMATIONAL USE ONLY, AND ARE SUBJECT TO CHANGE AT ANY TIME WITHOUT NOTICE, AND SHOULD NOT BE CONSTRUED AS A COMMITMENT BY ASUS. ASUS ASSUMES NO RESPONSIBILITY OR LIABILITY FOR ANY ERRORS OR INACCURACIES THAT MAY APPEAR IN THIS MANUAL, INCLUDING THE PRODUCTS AND SOFTWARE DESCRIBED IN IT.
Products and corporate names appearing in this manual may or may not be registered trademarks or
copyrights of their respective companies, and are used only for identication or explanation and to the owners’ benet, without intent to infringe.
2
Page 5
Contents
Notices .......................................................................................................... 5
Safety information ........................................................................................ 10
Conventions used in this guide .....................................................................11
Where to nd more information ....................................................................11
Package contents ........................................................................................ 12
Chapter 1: Getting started
Welcome! ..................................................................................................... 13
Getting to know your computer .................................................................... 13
Setting up your computer ............................................................................. 16
Turning your computer ON/OFF .................................................................. 19
Chapter 2: Using Windows® 7
Starting for the rst time ............................................................................... 21
Using Windows® 7 desktop .......................................................................... 22
Managing your les and folders ................................................................... 24
Restoring your system settings .................................................................... 26
Protecting your computer ............................................................................. 27
Getting Windows® Help and Support ........................................................... 28
Chapter 3: Connecting devices to your computer
Connecting a USB storage device ............................................................... 29
Connecting microphone and speakers ........................................................ 30
Connecting multiple external displays ......................................................... 33
Connecting an HDTV ................................................................................... 35
Chapter 4: Using your computer
Proper posture when using your Desktop PC.............................................. 37
Using the memory card reader .................................................................... 38
Using the optical drive ................................................................................. 39
Using the multimedia keyboard (on selected models only) ......................... 40
Chapter 5: Connecting to the Internet
Wired connection ......................................................................................... 43
Wireless connection (on selected models only) ........................................... 45
3
Page 6
Contents
Chapter 6: Using the utilities
ASUS AI Suite II ........................................................................................... 47
ASUS AI Manager ........................................................................................ 53
Ai Charger .................................................................................................... 55
ASUS Webstorage ....................................................................................... 56
ASUS Easy Update ..................................................................................... 58
ASUS Instant On ......................................................................................... 59
Nero 9 ........................................................................................................ 60
Recovering your system .............................................................................. 61
Chapter 7: Troubleshooting
Troubleshooting ........................................................................................... 63
ASUS contact information ............................................................................ 70
4
Page 7

Notices

REACH
Complying with the REACH (Registration, Evaluation, Authorisation, and Restriction of Chemicals) regulatory framework, we published the chemical substances in our products at ASUS REACH website at http://csr.asus.com/english/REACH.htm
ASUS Recycling/Takeback Services
ASUS recycling and takeback programs come from our commitment to the highest standards for protecting our environment. We believe in providing solutions for you to be able to responsibly recycle our products, batteries, other components as well as the packaging materials. Please go to http://csr.asus.com/english/Takeback.htm for detailed recycling information in different regions.
Federal Communications Commission Statement
This device complies with FCC Rules Part 15. Operation is subject to the following two conditions:
This device may not cause harmful interference.
This device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to Part 15 of the Federal Communications Commission (FCC) rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
The use of a shielded-type power cord is required in order to meet FCC emission limits and to prevent interference to the nearby radio and television reception. It is essential that only the supplied power cord be used. Use only shielded cables to connect I/O devices to this
equipment. You are cautioned that changes or modications not expressly approved by the
party responsible for compliance could void your authority to operate the equipment.
(Reprinted from the Code of Federal Regulations #47, part 15.193, 1993. Washington
DC: Ofce of the Federal Register, National Archives and Records Administration, U.S. Government Printing Ofce.)
5
Page 8
FCC Radio Frequency (RF) Exposure Caution Statement
Any changes or modications not expressly approved by the party responsible for
compliance could void the user’s authority to operate this equipment. “The manufacture
declares that this device is limited to Channels 1 through 11 in the 2.4GHz frequency by specied rmware controlled in the USA.”
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. To maintain compliance with FCC RF exposure compliance requirements, please avoid direct contact to the transmitting antenna during transmitting. End users must
follow the specic operating instructions for satisfying RF exposure compliance.
IC Radiation Exposure Statement for Canada
This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. To maintain compliance with IC RF exposure compliance requirements, please avoid direct contact to the transmitting antenna during transmitting. End users must follow the
specic operating instructions for satisfying RF exposure compliance.
Operation is subject to the following two conditions:
This device may not cause interference and
This device must accept any interference, including interference that may cause undesired operation of the device.
To prevent radio interference to the licensed service (i.e. co-channel Mobile Satellite systems) this device is intended to be operated indoors and away from windows to provide maximum shielding. Equipment (or its transmit antenna) that is installed outdoors is subject to licensing.
Déclaration d'Industrie Canada relative à l’exposition aux ondes radio
Cet appareil est conforme aux limites d'exposition aux radiations d’Industrie Canada dénies
pour un environnement non-contrôlé. Pour maintenir la conformité avec les exigences
d'exposition RF IC, veuillez éviter tout contact direct avec l'antenne pendant l'émission. Les utilisateurs naux doivent suivre les instructions de fonctionnement spéciques pour satisfaire la
conformité aux expositions RF. Son utilisation est sujette aux deux conditions suivantes :
Cet appareil ne peut pas causer d'interférence, et
Cet appareil doit accepter toute interférence, y compris les interférences qui pourraient causer un fonctionnement non souhaité de l'appareil.
Pour éviter les interférences radio avec le service sous licence (c'est à-dire le partage de canal avec les systèmes de téléphonie satellite), cet appareil est destiné à être utilisé en intérieur et loin des fenêtres pour fournir un blindage maximal. Tout appareil (ou son antenne d'émission) qui est installé en extérieur est sujet à cette licence.
Wireless Operation Channel for Different Domains
N. America 2.412-2.462 GHz Ch01 through CH11 Japan 2.412-2.484 GHz Ch01 through Ch14 Europe ETSI 2.412-2.472 GHz Ch01 through Ch13
6
Page 9
CE Mark Warning
CE marking for devices without wireless LAN/Bluetooth
The shipped version of this device complies with the requirements of the EEC directives 2004/108/EC “Electromagnetic compatibility” and 2006/95/EC “Low voltage directive”.
CE marking for devices with wireless LAN/ Bluetooth
This equipment complies with the requirements of Directive 1999/5/EC of the European Parliament and Commission from 9 March, 1999 governing Radio and Telecommunications Equipment and mutual recognition of conformity.
This equipment may be operated in all members of the EU. Some areas of France have a restricted frequency band. This equipment may be used indoor only.
低功率射頻電機設備警語
依據低功率電波輻射性電機管理辦法 第十二條 經型式認證合格之低功率射頻電機,非經許可,公司、商號或使用者均不得擅自 變更頻率、加大功率或變更原設計之特性及功能。 第十四條 低功率射頻電機之使用不得影響飛航安全及乾擾合法通信;經發現有乾擾現象 時,應立即停用,並改善至無干擾時方得繼續使用。 前項合法通信,指依電信法規定作業之無線電通信。 低功率射頻電機須忍受合法通信或工業、科學及醫療用電波輻射性電機設備之干擾。
與5.25GHz 至5.35GHz 區域內操作之
無線設備的警告申明
工作頻率5.250~5.350GHz 該頻率限於室內使用
VCCI: Japan Compliance Statement VCCI Class B Statement
7
Page 10
KC: Korea Warning Statement
Macrovision Corporation Product Notice
This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be
authorized by Macrovision Corporation, and is intended for home and other limited viewing
uses only unless otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited.
Lithium-Ion Battery Warning
CAUTION: Danger of explosion if battery is incorrectly replaced. Replace only with the
same or equivalent type recommended by the manufacturer. Dispose of used batteries according to the manufacturer’s instructions.
8
Page 11

Safety information

Disconnect the AC power and peripherals before cleaning. Wipe the Desktop PC using a clean cellulose sponge or chamois cloth dampened with solution of nonabrasive detergent and a few drops of warm water then remove any extra moisture with a dry cloth.
DO NOT place on uneven or unstable work surfaces. Seek servicing if the casing has
been damaged.
DO NOT expose to dirty or dusty environments. DO NOT operate during a gas leak.
DO NOT place or drop objects on top and do not shove any foreign objects into the
Desktop PC.
DO NOT expose to strong magnetic or electrical elds.
DO NOT expose to or use near liquids, rain, or moisture. DO NOT use the modem during
electrical storms.
Battery safety warning: DO NOT throw the battery in re. DO NOT short circuit the contacts. DO NOT disassemble the battery.
Use this product in environments with ambient temperatures between 0˚C (32F)and 35˚C (95F).
DO NOT cover the vents on the Desktop PC to prevent the system from getting overheated.
DO NOT use damaged power cords, accessories, or other peripherals.
To prevent electrical shock hazard, disconnect the power cable from the electrical outlet
before relocating the system.
Seek professional assistance before using an adapter or extension cord. These devices could interrupt the grounding circuit.
Ensure that your power supply is set to the correct voltage in your area. If you are not sure about the voltage of the electrical outlet you are using, contact your local power company.
If the power supply is broken, do not try to x it by yourself. Contact a qualied service
technician or your retailer.
9
Page 12

Conventions used in this guide

To ensure that you perform certain tasks properly, take note of the following symbols used throughout this manual.
DANGER/WARNING: Information to prevent injury to yourselfInformation to prevent injury to yourself
when trying to complete a task.
CAUTION: Information to prevent damage to the componentsInformation to prevent damage to the components
when trying to complete a task.
IMPORTANT: Instructions that you MUST follow to complete a
task.
NOTE: Tips and additional information to help you complete aTips and additional information to help you complete a
task.
Where to nd more information
Refer to the following sources for additional information and for product and software updates.
ASUS websites
The ASUS website provides updated information on ASUS hardware and software
products. Refer to the ASUS website www.asus.com.
ASUS Local Technical Support Visit ASUS website at http://support.asus.com/contact for the contact information of
local Technical Support Engineer.
10
Page 13

Package contents

Installation Guide
ASUS Essentio Desktop
PC
Power cord x1 Installation Guide x1 Warranty card x1
Nero 9 burning software
DVD x1
• If any of the above items is damaged or missing, contact your retailer.
• The illustrated items above are for reference only. Actual product specications may vary
with different models.
Keyboard x1 Mouse x1
Support DVD (optional) x1
Recovery DVD (optional) x1
Antenna (optional) x1
11
Page 14
12
Page 15

Chapter 1

Getting started

Welcome!

Thank you for purchasing the ASUS Essentio CM6340 Desktop PC! The ASUS Essentio CM6340 Desktop PC provides cutting-edge performance,
uncompromised reliability, and user-centric utilities. All these values are encapsulated in a stunningly futuristic and stylish system casing.
Read the ASUS Warranty Card before setting up your ASUS Desktop PC.

Getting to know your computer

Illustrations are for reference only. The ports and their locations, and the chassis color vary with different models.
Front panel
2
1
7
6
4
3
5
ASUS CM6340 13
Page 16
1. USB 2.0 ports.USB 2.0 ports. These Universal Serial Bus 2.0 (USB 2.0) ports connect to USB 2.0
devices such as a mouse, printer, scanner, camera, PDA, and others.
2. Microphone port.Microphone port. This port connects to a microphone.
3. Headphone port.Headphone port. This port connects to a headphone or speaker.
4. Power button.Power button. Press this button to turn on your computer.
5. Optical disk drive eject button.Optical disk drive eject button. Press this button to eject the optical disk drive tray.
6. Optical disk drive bay.Optical disk drive bay. There is an optical disk drive in this bay.
7. MultiMediaCard(MMC) / xD-Picture (XD) / Secure Digital™ (SD) / High CapacityMultiMediaCard(MMC) / xD-Picture (XD) / Secure Digital™ (SD) / High Capacity Secure Digital™(SDHC) / Memory Stick Pro™(MS/PRO) card slot. Insert a
supported memory card into this slot.
Rear panel
1
2
16
3
4
5
6
7
10 9
1. Power connector.Power connector. Plug the power cord to this connector.
2. Voltage selector switch.Voltage selector switch. Switch to select the appropriate system input voltage.
3. PS/2 keyboard port (purple). This port is for a PS/2 keyboard.
4. HDMI port.HDMI port. This port is for a High-Denition Multimedia Interface (HDMI) connector,
and is HDCP compliant allowing playback of HD DVD, Blu-ray, and other protected content.
5. DVI-D port.DVI-D port. This port is for any DVI-D compatible device and is HDCP compliant allowing playback of HD DVD, Blu-ray, and other protected content.
8
6
11
15
14
13
12
14 Chapter 1: Getting started
Page 17
6. USB 2.0 ports.USB 2.0 ports. These Universal Serial Bus 2.0 (USB 2.0) ports connect to USB 2.0
devices such as a mouse, printer, scanner, camera, PDA, and others.
7. USB 3.0 ports.USB 3.0 ports. These Universal Serial Bus 3.0 (USB 3.0) ports connect to USB 3.0
devices such as a mouse, printer, scanner, camera, PDA, and others.
• DO NOT connect a keyboard / mouse to any USB 3.0 port when installing Windows operating system.
• Due to USB 3.0 controller limitation, USB 3.0 devices can only be used under Windows OS environment and after the USB 3.0 driver installation.
• USB 3.0 devices can only be used as data storage only.
• We strongly recommend that you connect USB 3.0 devices to USB 3.0 ports for faster and better performance for your USB 3.0 devices.
®
®
8. Line In port (light blue).Line In port (light blue). This port connects to a tape, CD, DVD player, or other audio
sources.
9. Line Out port (lime).Line Out port (lime). This port connects to a headphone or speaker. In a 4, 6, or
8-channel conguration, the function of this port becomes Front Speaker Out.
10. Microphone port (pink). This port connects to a microphone.
Refer to the audio conguration table below for the function of the audio ports in a 2, 4, 6, or 8-channel conguration.
Audio 2, 4, 6, or 8-channel conguration
Port 2-channel 4-channel 6-channel 8-channel
Light Blue (Rear panel) Line In Rear Speaker Out Rear Speaker Out Rear Speaker Out Lime (Rear panel) Line Out Front Speaker Out Front Speaker Out Front Speaker Out Pink (Rear panel) Mic In Mic In Bass/Center Bass/Center Lime (Front panel) Side Speaker Out
11. Expansion slot brackets.Expansion slot brackets. Remove the expansion slot bracket when installing an
expansion card.
12. ASUS WLAN Card (on selected models only).ASUS WLAN Card (on selected models only). This optional WLAN card allows your
computer to connect to a wireless network.
13. LAN (RJ-45) port.LAN (RJ-45) port. This port allows Gigabit connection to a Local Area Network (LAN)
through a network hub.
LAN port LED indications
Activity/Link LED Speed LED Status Description Status Description
OFF No link OFF 10Mbps connection ORANGE Linked ORANGE 100Mbps connection BLINKING Data activity GREEN 1Gbps connection
ACT/LINK LED
SPEED LED
LAN port
ASUS CM6340 15
Page 18
14. VGA port.VGA port. This port is for VGA-compatible devices such as a VGA monitor.
15. PS/2 mouse port (green). This port is for a PS/2 mouse.
16. Air vents.Air vents. These vents allow air ventilation.
DO NOT block the air vents on the chassis. Always provide proper ventilation for your computer.

Setting up your computer

This section guides you through connecting the main hardware devices, such as the external monitor, keyboard, mouse, and power cord, to your computer.
Connecting an external monitor
Using the onboard display output ports
Connect your monitor to the onboard display output port.
To connect an external monitor using the onboard display output ports:
1. Connect a VGA monitor to the VGA port, or a DVI-D monitor to the DVI-D port, or an HDMI monitor to the HDMI port on the rear panel of your computer.
2. Plug the monitor to a power source.
16 Chapter 1: Getting started
Page 19
• If your computer comes with an ASUS Graphics Card, the graphics card is set as the primary display device in the BIOS. Hence, connect your monitor to a display output port on the graphics card.
• To connect multiple external monitors to your computer, refer to Connecting multiple
external monitors in Chapter 3 of this user manual for details.
Connecting a USB keyboard and a USB mouse
Connect a USB keyboard and a USB mouse to the USB ports on the rear panel of your computer.
ASUS CM6340 17
Page 20
Connecting the power cord
Connect one end of the power cord to the power connector on the rear panel of your computer and the other end to a power source.
18 Chapter 1: Getting started
Page 21

Turning your computer ON/OFF

This section describes how to turn on/off your computer after setting up your computer.
Turning your computer ON
To turn your computer ON:
1. Turn your monitor ON.
2. Press the power button on your computer.
Power button
3. Wait until the operating system loads automatically.
Turning your computer OFF
To turn your computer OFF:
1. Close all running applications.
2. Click on the Windows® desktop.
3. Click to shut down the operating system.
ASUS CM6340 19
Page 22
20 Chapter 1: Getting started
Page 23

Chapter 2

Using Windows® 7

Starting for the rst time
When you start your computer for the rst time, a series of screens appear to guide you in conguring the basic settings of your Windows® 7 operating system.
To start for the rst time:
1. Turn your computer on. Wait for a few minutes until the Set Up Windows screen
appears.
2. From dropdown list, select your language, then click Next.
3. From the dropdown lists, select your Country or region, Time and currency, and Keyboard layout, then click Next.
4. Key in uniques names for the user name and computer name, then click Next.
5. Key in the necessary information to set up your password, then click Next. You may also click Next to skip this step without entering any information.
If you want to set up a password for your account later, refer to the section Setting up a user account and password in this chapter.
6. Carefully read the license terms. Tick I accept the license terms and click Next.
7. Select Use recommended settings or Install important updates only to set up the security settings for your computer. To skip this step, select Ask me later.
8. Review your date and time settings. Click Next. The system loads the new settings and restarts. You may now start using your computer.
ASUS CM6340 21
Page 24

Using Windows® 7 desktop

Click the Start icon > Help and Support to obtain more information about Windows® 7.
Using the Start menu
The Start menu gives you access to programs, utilities, and other useful items on your computer. It also provides you with more information about Windows 7 through its Help and
Support feature.
Launching items from the Start menu
To launch items from the Start menu:
1. From the Windows® taskbar, click the Start icon .
2. From the Start menu, select the item that you want to launch.
You may pin programs that you want constantly displayed on the Start menu. For more details, refer to the section Pinning programs on the Start menu or taskbar on this chapter.
Using the Getting Started item
The Getting Started item on the Start menu contains information about some basic tasks
such as personalizing Windows®, adding new users, and transferring les to help you to familiarize yourself with using Windows® 7.
To use the Getting Started item:
1. From the Windows® taskbar, click the Start icon to launch the Start menu.
2. Select Getting Started. The list of available tasks appears.
3. Select the task that you want to do.
Using the taskbar
The taskbar allows you to launch and manage programs or items installed on your computer.
Launching a program from the taskbar
To launch a program from the taskbar:
From the Windows® taskbar, click an icon to launch it. Click the icon again to hide the program.
You may pin programs that you want constantly displayed on the taskbar. For more details, refer to the section Pinning programs on the Start menu or taskbar on this chapter.
22 Chapter 2: Using Windows® 7
Page 25
Pinning items on the jumplists
When you right-click an icon on the taskbar, a jumplist launches to provide you with quick­access to the program’s or item’s related links.You may pin items on the jumplist such as
favorite websites, often-visited folders or drives, or recently played media les.
To pin items to the jumplist:
1. From the taskbar, right-click an icon.
2. From the jumplist, right-click the item that you want to pin, then select Pin to this list.
Unpinning items from the jumplist
To unpin items from the jumplist:
1. From the taskbar, right-click an icon.
2. From the jumplist, right-click the item that you want to remove from the jumplist, then
select Unpin from this list.
Pinning programs on the Start menu or taskbar
To pin programs on the Start menu or taskbar:
1. From the Windows® taskbar, click the Start icon to launch the Start menu.
2. Right-click the item that you want to pin on the Start menu or taskbar.
3. Select Pin to Taskbar or Pin to Start menu.
You may also right-click on the icon of a running program on the taskbar, then select Pin
this program to taskbar.
Unpinning programs from the Start menu
To unpin programs from the Start menu:
1. From the Windows® taskbar, click the Start icon to launch the Start menu.
2. From the Start menu, right-click the program that you want to unpin, then select
Remove from this list.
Unpinning programs from the taskbar
To unpin programs from the taskbar:
1. From the taskbar, right-click the program that you want to remove from the taskbar,
then select Unpin this program from taskbar.
ASUS CM6340 23
Page 26
Using the notication area
By default, the notication area shows these three icons:
Action Center notication
Click this icon to display all the alert messages/notications and launch the Windows
Action Center.
Network connection
This icon displays the connection status and signal strength of the wired or wireless network connection.
Volume
Click this icon to adjust the volume.
®
Displaying an alert notication
To display an alert notication:
Click the Notication icon , then click the message to open it.
For more details, refer to the section Using Windows® Action Center in this chapter.
Customizing icons and notications
You may choose to display or hide the icons and notications on the taskbar or on the notication area.
To customize icons and notications:
1. From the notication area, click on the arrow icon .
2. Click Customize.
3. From the dropdown list, select the behaviors for the icons or items that you want to
customize.
Managing your les and folders
Using Windows® Explorer
Windows® Explorer allows you to view, manage, and organize your les and folders.
Launching Windows® Explorer
To launch Windows Explorer:
1. From the Windows® taskbar, click the Start icon to launch the Start menu.
2. Click Computer to launch Windows Explorer.
24 Chapter 2: Using Windows® 7
Page 27
Exploring les and folders
To explore les and folders:
1. Launch Windows® Explorer.
2. From the navigation or view pane, browse for the location of your data.
3. From the breadcrumb bar, click the arrow to display the contents of the drive or folder.
Customizing the le/folder view
To customize the le/folder view:
1. Launch Windows Explorer.
2. From the navigation pane, select the location of your data.
3. From the toolbar, click the View icon .
4. From the View menu, move the slider to select how you want to view the le/folder.
You may also right-click anywhere on the View pane, click View, and select the view type that you want.
Arranging your les
To arrange your les:
1. Launch Windows Explorer.
2. From the Arrange by eld, click to display the dropdown list.
3. Select your preferred arrangement type.
Sorting your les
To sort your les:
1. Launch Windows Explorer.
2. Right-click anywhere on the View pane.
3. From the menu that appears, select Sort by, then select your preferred sorting type.
Grouping your les
To group your les:
1. Launch Windows Explorer.
2. Right-click anywhere on the View pane.
3. From the menu that appears, select Group by, then select your preferred grouping
type.
ASUS CM6340 25
Page 28
Adding a new folder
To add a new folder:
1. Launch Windows Explorer.
2. From the toolbar, click New folder.
3. Key in a name for the new folder.
You may also right-click anywhere on the View pane, click New > Folder.
Backing up your les
Setting up a backup
To set up a backup:
1. Click > All Programs > Maintenance > Backup and Restore.
2. Click Set up backup. Click Next.
3. Select your backup destination. Click Next.
4. Select Let Windows choose (recommended) or Let me choose as your backup mode.
If you select Let Windows choose, Windows will not back up your programs, FAT-
formatted les, Recycle Bin les, or temporary les that are 1GB or more.
5. Follow the onscreen instructions to nish the process.

Restoring your system settings

The Windows® System Restore feature creates a restore point where the computer’s system settings are stored at certain time and date. It allows you to restore or undo changes to your computer’s system settings without affecting your personal data.
To restore your system:
1. Close all running applications.
2. Click > All Programs > Accessories > System Tools > System Restore.
3. Follow the onscreen instructions to complete the process.
26 Chapter 2: Using Windows® 7
Page 29

Protecting your computer

Using Windows® 7 Action Center
Windows® 7 Action Center provides you with alert notications, security information, system
maintenance information, and the option to automatically troubleshoot and x some common
computer problems.
You may customize the notications. For more details, refer to the previous section
Customizing icons and notications in this chapter.
Launching Windows® 7 Action Center
To launch Windows® 7 Action Center:
1. To launch Windows 7 Action Center, click the Notication icon , then click Open Action Center.
2. From Windows 7 Action Center, click the task that you want to do.
Using Windows® Update
Windows Update allows you to check and install the latest updates to enhance the security and performance of your computer.
Launching Windows® Update
To launch Windows® Update:
1. From the Windows® taskbar, click the Start icon to launch the Start menu.
2. Select All Programs > Windows Update.
3. From the Windows Update screen, click the task that you want to do.
Setting up a user account and password
You may create user accounts and passwords for people who will use your computer.
Setting up a user account
To set up a user account:
1. From the Windows® taskbar, click > Getting Started > Add new users.
2. Select Manage another account.
3. Select Create a new account.
4. Key in the name of the new user.
5. Select either Standard user or Administrator as the user type.
6. When done, click Create Account.
ASUS CM6340 27
Page 30
Setting up a user’s password
To set up a user’s password:
1. Select the user that you would like to set a password.
2. Select Create a password.
3. Key in a password and conrm it. Key in your password’s hint.
4. When done, click Create password.
Activating the anti-virus software
Trend Micro Internet Security is pre-installed on your computer. It is a third-party anti-virus software protecting your computer from virus. It is purchased separately. You have a 30-day trial period after activating it.
To activate Trend Micro Internet Security:
1. Run the Trend Micro Internet Security application.
2. Carefully read the license terms. Click Agree & Activate.
3. Input your e-mail address and select your location. Click Next.
4. Click Finish to complete the activation.

Getting Windows® Help and Support

Windows® Help and Support provides you with guides and answers in using the applications in Windows® 7 platform.
To launch Windows® Help and Support, click > Help and Support.
Ensure that you are connected to the Internet to obtain the latest Windows
28 Chapter 2: Using Windows® 7
®
online help.
Page 31

Chapter 3

Connecting devices to your computer

Connecting a USB storage device

This desktop PC provides USB 2.0/1.1 ports on both the front and rear panels and USB3.0 ports on the rear panel. The USB ports allow you to connect USB devices such as storage devices.
To connect a USB storage device:
Insert the USB storage device to your computer.
Front panel
To remove a USB storage device:
1. Click from the Windows notication area on your computer, then click Eject USB2.0 FlashDisk.
Rear panel
2. When the Safe to Remove Hardware message pops up, remove the USB storage device from your computer.
DO NOT remove a USB storage device when data transfer is in progress. Doing so may cause data loss or damage the USB storage device.
ASUS CM6340 29
Page 32
LINE OUT

Connecting microphone and speakers

This desktop PC comes with microphone ports and speaker ports on both the front and rear panels. The audio I/O ports located on the rear panel allow you to connect 2-channel, 4-channel, 6-channel, and 8-channel stereo speakers.
Connecting Headphone and Mic
Connecting 2-channel Speakers
30 Chapter 3: Connecting devices to your computer
Page 33
Connecting 4-channel Speakers
LINE OUT
LINE OUT
Connecting 6-channel Speakers
ASUS CM6340 31
Page 34
LINE OUT
Connecting 8-channel Speakers
32 Chapter 3: Connecting devices to your computer
Page 35

Connecting multiple external displays

Your desktop PC may come with VGA, HDMI, or DVI ports and allows you to connect multiple external displays.
When a graphics card is installed in your computer, connect the monitors on the output ports of the graphics card.
Setting up multiple displays
When using multiple monitors, you are allowed to set display modes. You can use the additional monitor as a duplicate of your main display, or as an extension to enlarge your Windows desktop.
To set up multiple displays:
1. Turn off your computer.
2. Connect the two monitors to your computer and connect the power cords to the monitors. Refer to Setting up your computer section in Chapter 1 for details on how to connect a monitor to your computer.
For some graphic cards, only the monitor that is set to be the primary display has display during POST. The dual display function works only under Windows.
ASUS CM6340 33
Page 36
3. Turn on your computer.
4. Do any of the following to open the Screen Resolution setting screen:
Click > Control Panel > Appearance and Personalization > Display > Change display settings.
Right click anywhere on your Windows desktop. When the pop-up menu appears, click Personalize > Display > Change display settings.
5. Select the display mode from the Multiple displays: drop-down list.
Duplicate these displays: Select this option to use the additional monitor as a duplicate of your main display.
Extend these displays: Select this option to use the additional monitor as an extension display. This increases your desktop space.
Show desktop only on 1 / 2: Select this option to show desktop only on monitor 1 or monitor 2.
Remove this display: Select this options to remove the selected display.
6. Click Apply or OK. Then click Keep Changes on the conrmation message.
34 Chapter 3: Connecting devices to your computer
Page 37

Connecting an HDTV

Connect a High Denition TV (HDTV) to the HDMI port of your computer.
• You need an HDMI cable to connect the HDTV and the computer. The HDMI cable is purchased separately.
• To get the best display performance, ensure that your HDMI cable is less than 15 meters.
ASUS CM6340 35
Page 38
36 Chapter 3: Connecting devices to your computer
Page 39

Chapter 4

Eye level to the top of the monitor screen
Foot rest 90˚ angles

Using your computer

Proper posture when using your Desktop PC

When using your Desktop PC, maintaining the proper posture is necessary to prevent strain to your wrists, hands, and other joints or muscles. This section provides you with tips on avoiding physical discomfort and possible injury while using and fully enjoying your Desktop PC.
To maintain the proper posture:
Position your computer chair to make sure that your elbows are at or slightly above the keyboard to get a comfortable typing position.
Adjust the height of your chair to make sure that your knees are slightly higher than your hips to relax the backs of your thighs. If necessary, use a footrest to raise the level of your knees.
Adjust the back of your chair so that the base of your spine is rmly supported and
angled slightly backward.
Sit upright with your knees, elbows and hips at an approximately 90º angle when you are at the PC.
Place the monitor directly in front of you, and turn the top of the monitor screen even with your eye level so that your eyes look slightly downward.
Keep the mouse close to the keyboard, and if necessary, use a wrist rest for support to reduce the pressure on your wrists while typing.
Use your Desktop PC in a comfortably-lit area, and keep it away from sources of glare such as windows and straight sunlight.
Take regular mini-breaks from using your Desktop PC.
ASUS CM6340 37
Page 40

Using the memory card reader

Digital cameras and other digital imaging devices use memory cards to store digital picture or
media les. The built-in memory card reader on the front panel of your system allows you to
read from and write to different memory card drives.
1
To use the memory card:
1. Insert the memory card into the card slot.
• A memory card is keyed so that it ts in only one direction. DO NOT force a card into a
slot to avoid damaging the card.
• You can place media in one or more of the card slots and use each media independently. Place only one memory card in a slot at one time.
2. Select a program from the AutoPlay window to access your les.
• If AutoPlay is NOT enabled in your computer, click Windows® 7 Start button on the taskbar, click Computer, and then double-click the memory card icon to access the data on it.
• Each card slot has its own drive icon which is displayed on the Computer screen.
• The memory card reader LED lights up and blinks when data is being read from or written to the memory card.
3. When nished, right-click the memory card drive icon on the Computer screen, click Eject, and then remove the card.
Never remove cards while or immediately after reading, copying, formatting, or deleting data on the card or else data loss may occur.
To prevent data loss, use “Safely Remove Hardware and Eject Media” in the Windows
notication area before removing the memory card.
38 Chapter 4: Using your computer
Page 41

Using the optical drive

1
2
3
Inserting an optical disc
To insert an optical disc:
1. While your system is on, press the eject button below the drive bay cover to open the tray.
2. Place the disc to the optical drive with the label side facing up.
3. Push the tray to close it.
4. Select a program from the AutoPlay window to access your les.
If AutoPlay is NOT enabled in your computer, click Windows® 7 Start button on the taskbar, click Computer, and then double-click the CD/DVD drive icon to access the data on it.
Removing an optical disc
To remove an optical disc:
1. While the system is on, do either of the following to eject the tray:
• Press the eject button below the drive bay cover.
• Right-click the CD/DVD drive icon on the Computer screen, and then click Eject.
2. Remove the disc from the disc tray.
ASUS CM6340 39
Page 42

Using the multimedia keyboard (on selected models only)

The keyboard varies with models. The illustrations on this section are for reference only.
ASUS PRIMAX/KB2621 keyboard
Keys Description
1.
2.
3.
4.
5.
6.
Decreases the system volume.
Turns the volume’s mute mode on/off.
Increases the system volume.
Goes to the previous track in a media player.
Plays or pauses playback in a media player.
Goes to the next track in a media player.
The special function keys only work on Windows® Vista / Windows® 7 operating systems.
2
4
5
3
31
6
40 Chapter 4: Using your computer
Page 43
ASUS KB34211 modern wired keyboard
1 2 3
Hot keys Description
1.
2.
3.
The special function keys only work on Windows® Vista / Windows® 7 / XP operating systems.
Turns the volume’s mute mode on/off.
Decreases the system volume.
Increases the system volume.
ASUS PK1100 wired keyboard
ASUS CM6340 41
Page 44
42 Chapter 4: Using your computer
Page 45

Chapter 5

Modem
RJ-45 cable

Connecting to the Internet

Wired connection

Use an RJ-45 cable to connect your computer to a DSL/cable modem or a local area network (LAN).
Connecting via a DSL/cable modem
To connect via a DSL/cable modem:
1. Set up your DSL/cable modem.
Refer to the documentation that came with your DSL/cable modem.
2. Connect one end of an RJ-45 cable to the LAN (RJ-45) port on the rear panel of your computer and the other end to a DSL/cable modem.
3. Turn on the DSL/cable modem and your computer.
4. Congure the necessary Internet connection settings.
Contact your Internet Service Provider (ISP) for details or assistance in setting up your Internet connection.
ASUS CM6340 43
Page 46
RJ-45 cable
LAN
Connecting via a local area network (LAN)
To connect via a LAN:
1. Connect one end of an RJ-45 cable to the LAN (RJ-45) port on the rear panel of your computer and the other end to your LAN.
2. Turn on your computer.
3. Congure the necessary Internet connection settings.
Contact your network administrator for details or assistance in setting up your Internet connection.
44 Chapter 5: Connecting to the Internet
Page 47

Wireless connection (on selected models only)

Wireless AP
Modem
Connect your computer to the Internet through a wireless connection.
To establish a wireless connection, you need to connect to a wireless access point (AP).
• To increase the range and sensitivity of the wireless radio signal, connect the external antennas to the antenna connectors on the ASUS WLAN Card.
• Place the antennas on the top of your computer for the best wireless performance.
• The external antennas are optional items.
To connect to a wireless network:
1. Click the network icon in the notication area to display the available wireless networks.
2. Select the wireless network that you want to connect to, then click Connect.
3. You may need to key in the network security key for a secured wireless network, then click OK.
4. Wait while your computer is connecting to the wireless network.
5. The wireless connection is established successfully. The connection status is displayed and the network icon displays the connected status.
ASUS CM6340 45
Page 48
46 Chapter 5: Connecting to the Internet
Page 49

Chapter 6

Using the utilities

The Support DVD and Recovery DVD may not be included in the package. You may use the Recovery Partition feature to create the Support DVD and Recovery DVD. For details, refer to Recovering your system in this chapter.

ASUS AI Suite II

ASUS AI Suite II is an all-in-one interface that integrates several ASUS utilities and allows users to launch and operate these utilities simultaneously.
This utility is pre-installed on some models. For models without an operating system, follow the steps below to install this utility.
Installing AI Suite II
To install AI Suite II:
1. Place the support DVD in the optical drive. The Drivers installation tab appears if Autorun is enabled.
2. Click the Utilities tab, then click ASUS AI Suite II.
3. Follow the onscreen instructions to complete the installation.
Using AI Suite II
AI Suite II automatically starts when you enter the Windows® operating system. The AI Suite II icon appears in the Windows® notication area. Click the icon to open the AI Suite II main menu bar.
Click each button to select and launch a utility, to monitor the system, to update the
motherboard BIOS, to display the system information, and to customize the settings of AI
Suite II.
Click to select a utility
ASUS CM6340 47
Click to monitor sensors or CPU frequency
Click to update the motherboard BIOS
Click to show the system information
Click to customize the interface settings
Page 50
The Tool menu
The Tool menu includes the EPU, Probe II, and Sensor Recorder panels.
Launching EPU
EPU is an energy-efcient tool that provides you with a total power-saving solution. It detects
the current loading and intelligently adjusts the power usage in real-time. When you select the Auto mode, the system changes modes automatically according to the current system
status. It allows you to customize each mode through conguring the settings such as CPU
frequency, vCore Voltage, and Fan Control.
To launch EPU:
Click Tool > EPU on the AI Suite II main menu bar.
Displays the following message if no VGA power saving engine is detected.
Displays current mode
The items lighting up means power saving engine is activated
Displays the amount of CO2 reduced
*Shifts between the display of Total and Current CO2 reduced
Displays the current CPU power
Advanced settings for each mode
Multiple system operating modes
* Select From EPU Installation to show the CO2 that has been reduced since you
installed EPU.
* Select From the Last Reset to show the total CO2 that has been reduced since you
click the Clear button .
48 Chapter 6: Using the utilities
Displays the system properties of each mode
Page 51
Launching and conguring Probe II
Probe II is a utility that monitors the computer’s vital components, and detects and alerts you of any problem with these components. Probe II senses fan rotations, CPU temperature, and system voltages, among others. With this utility, you are assured that your computer is always at a healthy operating condition.
To launch Probe II:
Click Tool > Probe II on the AI Suite II main menu bar.
To congure Probe II:
Click the Voltage/Temperature/Fan Speed tabs to activate the sensors or to adjust the sensor threshold values.
The Preference tab allows you to customize the time interval of sensor alerts, or change the temperature unit.
Saves your
conguration
Loads your saved
conguration
ASUS CM6340 49
Loads the default threshold values for each sensor
Applies your changes
Page 52
Launching and conguring Sensor Recorder
Sensor Recorder allows you to monitor the changes in the system voltage, temperature, and fan speed, as well as recording the changes.
To launch Sensor Recorder:
Click Tool > Sensor Recorder on the AI Suite II main menu bar.
To congure Sensor Recorder:
Click the Voltage/Temperature/Fan Speed tabs and select the sensors that you want
to monitor.
The History Record tab allows you to record the changes in the sensors that you
enable.
Select the sensors that you want to monitor
Drag to view the status during a certain period of time
Click to zoom in/out
Click to return to the default mode
50 Chapter 6: Using the utilities
Click to zoom in/out the X axis
the Y axis
Page 53
The Monitor menu
The Monitor menu includes the Sensor and CPU Frequency panels.
Launching Sensor
The Sensor panel displays the current value of a system sensor such as fan rotation, CPUdisplays the current value of a system sensor such as fan rotation, CPU temperature, and voltages.
To launch Sensor:
Click Monitor > Sensor on the AI Suite II main menu bar.
Launching CPU Frequency
The CPU Frequency panel displays the current CPU frequency and CPU usage.displays the current CPU frequency and CPU usage.
To launch CPU frequency:
Click Monitor > CPU Frequency on the AI Suite II main menu bar.
The Update menu
The Update menu allows you to update the motherboard BIOS and the BIOS boot logo with the ASUS designed update utilities.
ASUS Update
The ASUS Update is a utility that allows you to manage, save, and update the motherboard BIOS in Windows® OS. The ASUS Update utility allows you to update the BIOS directlypdate the BIOS directly
from the Internet, download the latest BIOS le from the Internet, update the BIOS from an, download the latest BIOS le from the Internet, update the BIOS from an updated BIOS le, save the current BIOS le or view the BIOS version information.
Updating the BIOS through the Internet To update the BIOS through the Internet:
1. From the ASUS Update screen, select Update BIOS from le, then click Next.
2. Select the ASUS FTP site nearest you to avoid network trafc.
Tick the two items if you want to enable the BIOS downgradable and Auto-BIOS
backup functions.
3. Select the BIOS version that you want to download, then click Next.
When no updated version is detected, a message is displayed informing you that there
is no new BIOS le from the BIOS server.
4. Click Yes if you want to change the boot logo, which is the image appearing on screen during the Power-On Self-Tests (POST). Otherwise, click Otherwise, click No.
5. Follow the onscreen instructions to complete the update process.
ASUS CM6340 51
Page 54
Updating the BIOS through a BIOS le To update the BIOS through a BIOS le:
1. From the ASUS Update screen, select Update BIOS from le, then click Next.
2. Locate the BIOS le from the Open window, click Open, and click Next.
3. Click Yes if you want to change the boot logo, which is the image appearing on screen during the Power-On Self-Tests (POST). Otherwise, click Otherwise, click No.
4. Follow the onscreen instructions to complete the update process.
The System Information screen
The System Information screen displays the information about the motherboard, CPU, and memory slots.
Click the MB tab to see the details on the motherboard manufacturer, product name, version, and BIOS.
Click the CPU tab to see the details on the processor and the Cache.
Click the SPD tab and then select the memory slot to see the details on the memory module installed on the corresponding slot.
The Settings screen
The Settings screen allows you to customize the main menu bar settings and the interface’s
skin.
Application allows you to select the application that you want to enable.
Bar allows you to modify the bar setting,
Skin allows you to customize the interface’s contrast, brightness, saturation, hue, and
gamma.
52 Chapter 6: Using the utilities
Page 55

ASUS AI Manager

ASUS AI Manager is a utility which gives you quick and easy access to frequently-used applications.
This utility is pre-installed on some models. For models without an operating system, follow the steps below to install this utility.
Installing AI Manager
To install AI Manager:
1. Place the support DVD in the optical drive. If Autorun is enabled, the Drivers installation
wizard appears.
If Autorun is disabled, double-click the setup.exe le from the ASUS AI Manager folder in the support DVD.
2. Click the Utilities tab, then click ASUS AI Manager.
3. Follow the onscreen instructions to complete the installation.
Launching AI Manager
To launch the AI Manager from the Windows® desktop, click
AI Manager > AI Manager 1.xx.xx
After launching the application, the AI Manager icon appears in the Windows® taskbar. Right-click this icon to switch between the quick bar and the main window, and to launch the
AI Manager either from the quick bar or taskbar.
. The AI Manager quick bar appears on the desktop.
AI Manager quick bar
The AI Manager quick bar saves the desktop space and allows you to launch the ASUS utilities or display system information easily. Click any of the Main, My Favorites, Support or Information tab to display the menu’s contents.
Start > All Programs > ASUS >
Exit button Switch to main Window Add to ToolBar
Main
My Favorites
Click the Maximize/restore button to switch between full window and quick bar. Click the Minimize button to keep the AI Manager on the taskbar. Click the Close button to quit
the AI Manager.
Support
Information
Main
The Main menu contains three utilities: AI Disk, AI Security, and AI Booting. Click the arrow on the Main menu icon to browse through the utilities in the main menu.
ASUS CM6340 53
Page 56
AI Disk
AI Disk allows you to easily clear temporary IE les, IE cookies, IE URLs, IE history,
or the Recycle Bin. Click the AI Disk icon on the quick bar to display the full AI Disk window and select the items you want to clear. Click Apply when done.
AI Security
AI Security enables you to set a password to secure your devices, such as USB ash disks and CD/DVD disks, from unauthorized access.
To lock a device:
1. When using AI Security for the rst time, you are asked to set a password. Key in
a password with at most 20 alphanumeric characters.
2. Conrm the password.
3. Key in the password hint (recommended).
4. When done, click Ok.
5. Select the device you want to lock, then click Apply.
6. Key in the password you have set previously, then click Ok.
To unlock the device:
1. Deselect the locked device, then click Apply.
2. Key in the password you have set previously, then click Ok.
To change the password:
Click Change Password, then follow the onscreen instructions to change
password.
AI Booting
AI Booting allows you to specify the boot device priority sequence.
To specify the boot sequence:
1. Select a device, then click the left/right button to specify the boot sequence.
2. When done, press Apply.
54 Chapter 6: Using the utilities
Page 57
My Favorites
My Favorites allows you to add applications that you frequently use, saving you from
searching for the applications throughout your computer.
To add an application:
1. Click Add, then locate the application you want to add to My Favorites.
2. Click Open on the le location window. The application is added to My Favorites list.
Right click on the application icon to launch, delete, or rename the selected application. You can also double click to launch the selected application.
Support
Click any links on the Support window to go to the ASUS website, technical support website, download support website, or contact information.
Information
Click the tab on the Information window to see the detailed information about your system, motherboard, CPU, BIOS, installed device(s), and memory.

Ai Charger

Ai Charger is a unique software that allows you to quickly charge your Apple devices such as iPod, iPhone, and iPad on your ASUS computer’s USB 2.0 / USB 3.0 port.
• There is no setting screen for Ai Charger. After its installation on your computer, the Ai Charger icon appears on the Windows® taskbar.
• The Ai Charger icon ( ) shows if an Apple device is connected on your computer’s USB port.
• Your Apple device can only be detected if its Apple USB driver is properly installed in it.
• The current Apple devices only support USB 2.0 performance. Even when you plug your Apple device into a USB 3.0 port, the maximum charging rate is still 500mA, which is the USB 2.0 maximum charging rate. Ai Charger can increase this limit to 700mA~900mA.
• There is no BIOS, hardware, or chipset requirements for Ai Charger.
ASUS CM6340 55
Page 58

ASUS Webstorage

ASUS webstorage is designed to help you retrieve your data to your notebooks, smartphones or tablets wherever there is internet connection.
This utility is pre-installed on some models. For models without an operating system, follow the steps below to install this utility.
Installing webstorage
To install webstorage:
Place the support DVD in the optical drive. Double-click the setup.exe le from the ASUS
WebStorage folder in the Software folder in the support DVD.
Launching Webstorage
To launch the WebStorage from the Windows® desktop, click
Programs > ASUS > Webstorage
webstorage quick bar appears in the Windows® taskbar. Right-click this icon to switch between the quick bar and the main window
Start > All
. The
Drive
Allows your to retrieve all your backups, synced les, share groups and password protected data from here. Right-click the mouse to preview les before downloading or generating a
sharing URL.
Backup
To backup your most important data with simple steps: preset a backup shcedule with your
preferences in cloud storage; or select “Auto Backup” for complete data backup.
56 Chapter 6: Using the utilities
Page 59
MySyncFolder
To store the updated les to MySyncFolder for easy access and share of all types of les
without the limitation of location or device.
Calendar
ASUS WebStorage automatically syncs the most updated calendar events to all personal computers so that you know the exact events no matter which PC is in use.
BookmarkSyncer
The convenient BookmarkSyncer keeps our browser preference and bookmark to the cloud
automatically synchronized in multiple computer.
MobileApp
ASUS WebStorage mobile applications sync your les between multiple devices. It also supports transcoding technology that allows preview and les streaming on your mobile
phone.
Go to Web
Experience the value-added cloud service through ASUS WebStorage, without the risk of losing data.
Settings
1. Click the Settings icon , the settings interface appears.
2. Follow the onscreen instructions to complete the conguration.
ASUS CM6340 57
Page 60

ASUS Easy Update

ASUS Easy Update is a software tool that automatically detects the latest drivers and applications for your system.
1. From the Windows ® notication area,
right-click the ASUS Easy Update icon.
2. Select Schedule to set how often you
want to update your system.
3. Select Update to activate the update.
4. Click OK to display the items you can
download.
5. Check the item(s) you want to download,
and then click OK.
58 Chapter 6: Using the utilities
Page 61

ASUS Instant On

ASUS Instant On gives you with a quick access to the Hybrid Sleep mode.
Using ASUS Instant On
To use ASUS Instant On:
The Instant On utility is pre-installed on your computer and automatically launches after starting up your computer.
1. When starting up your computer, you can see the utility icon from Windows taskbar.
2. Press <Alt + F1> and then click OK on
the conrmation message. Your system
will enter the Hybrid Sleep mode.
The default hotkey is <Alt + F1>. To change it, see the section below.
Tick to not show this message next time.
Setting up ASUS Instant On
To set up ASUS Instant On:
1. Right-click the ASUS Instant On icon from Windows taskbar. The main settings screen appears.
You can choose to enable/disable ASUS
Instant On hotkey, and show/hide ASUS Instant On icon from Windows taskbar.
2. Click Redene from the main settings screen. The hotkey settings screen appears.
3. Key in the combination keys you want to use for ASUS Instant On hotkey.
4. Click OK to save your changes, and Cancel to discard the changes you made.
ASUS CM6340 59
Page 62

Nero 9

Nero 9 allows you to create, copy, burn, edit, share, and update different kinds of data
Installing Nero 9
To install Nero 9:
1. Insert the Nero 9 DVD into your optical drive.
2. If Autorun is enabled, the main menu appears automatically.
If Autorun is disabled, double-click the SeupX.exe le from the main directory of your Nero 9 DVD.
3. From the main menu, click Nero 9 Essentials.
4. Select the language you want to use for Installation Wizard. Click Next.
5. Click Next to continue.
6. Tick I accept the License Conditions. When done, click Next.
7. Select Typical then click Next.
8. Tick Yes, I want to help by sending anonymous application data to Nero then click Next.
9. When done, click Exit.
Burning les
To burn les:
1. From the main menu, click Data Burning > Add.
2. Select the les that you want to burn. When done, click Add.
3. After selecting les that you want to burn, click Burn to burn the les to a disc.
For more details about using Nero 9, refer to the Nero website at www.nero.com
60 Chapter 6: Using the utilities
Page 63

Recovering your system

Using the system recovery partition
The system recovery partition quickly restores your Desktop PC’s software to its original
working state. Before using the system recovery partition, copy your data les (such as Outlook PST les) to USB storage devices or to a network drive and make note of any customized conguration settings (such as network settings).
About the system recovery partition
The system recovery partition is a reserved space on your hard disk drive used to restore the operating system, drivers, and utilities installed on your Desktop PC at the factory.
DO NOT delete the system recovery partition, which is the partition without volume label on Disk 0. The system recovery partition is created at the factory and cannot be restored if
deleted. Take your Desktop PC to an authorized ASUS service center if you have problems
with the recovery process.
Using the system recovery partition:
1. Press <F9> during bootup.
2. Highlight Windows Setup [EMS Enabled] and press <Enter>.
3. From the Recover system to a partition screen, click <Next>.
4. Follow the onscreen instructions to complete the recovery process.
Visit the ASUS website at www.asus.com for updated drivers and utilities.
ASUS CM6340 61
Page 64
Using the Recovery DVD (on selected models)
Prepare 1~3 blank writable DVDs as instructed to create the Recovery DVD.
Remove the external hard disk drive before performing system recovery on your Desktop PC. According to Microsoft, you may lose important data because of setting up Windows on the wrong disk drive or formatting the incorrect drive partition.
To use the Recovery DVD:
1. Insert the Recovery DVD into the optical drive. Your Desktop PC needs to be powered ON.
2. Restart the Desktop PC and press <F8> on bootup and select the optical drive (may be labeled as “CD/DVD”) and press <Enter> to boot from the Recovery DVD.
3. Select OK to start to restore the image.
4. Select OK to conrm the system recovery.
Restoring will overwrite your hard drive. Ensure to back up all your important data before the system recovery.
5. Follow the onscreen instructions to complete the recovery process.
DO NOT remove the Recovery disc, unless instructed to do so, during the recovery process or else your partitions will be unusable.
Visit the ASUS website at www.asus.com for updated drivers and utilities.
62 Chapter 6: Using the utilities
Page 65

Chapter 7

Troubleshooting

Troubleshooting

This chapter presents some problems you might encounter and the possible solutions.
My computer cannot be powered on and the power LED on the front
?
panel does not light up
Check if your computer is properly connected.
Check if the wall outlet is functioning.
Check if the Power Supply Unit is switched on. Refer to the section Turning
your computer ON/OFF in Chapter 1.
My computer hangs.
?
Do the following to close the programs that are not responding:
1. Simultaneously press <Alt> + <Ctrl> + <Delete> keys on the keyboard,
2. Click Applications tab.
3. Select the program that is not responding, then click End Task.
If the keyboard is not responding. Press and hold the Power button on the top
then click Start Task Manager.
of your chassis until the computer shuts down. Then press the Power button to turn it on.
I cannot connect to a wireless nestwork using the ASUS WLAN Card
?
(on selected models only)?
Ensure that you enter the correct network security key for the wireless network you want to connect to.
Connect the external antennas (optional) to the antenna connectors on the ASUS WLAN Card and place the antennas on the top of your computer chassis for the best wireless performance.
The arrow keys on the number key pad are not working.
?
Check if the Number Lock LED is off. When the Number Lock LED is on,
the keys on the number key pad are used to input numbers only. Press the Number Lock key to turn the LED off if you want to use the arrow keys on the number key pad.
ASUS CM6340 63
Page 66
No display on the monitor.
?
Check if the monitor is powered on.
Ensure that your monitor is properly connected to the video output port on your computer.
If your computer comes with a discrete graphics card, ensure that you connect your monitor to a video output port on the discrete graphics card.
Check if any of the pins on the monitor video connector is bent. If you discover bent pins, replace the monitor video connector cable.
Check if your monitor is plugged to a power source properly.
Refer to the documentation that came with your monitor for more troubleshooting information.
When using multiple monitors, only one monitor has display.
?
Ensure that the both monitors are powered on.
During POST, only the monitor connected to the VGA port has display. The dual display function works only under Windows.
When a graphics card is installed on your computer, ensure that you connect the monitors to the output port on the graphics card.
Check if the multiple displays settings are correct. Refer to section
Connecting multiple external displays in Chapter 3 for details.
My computer cannot detect my USB storage device.
?
The rst time you connect your USB storage device to your computer,
Windows automatically installs a driver for it. Wait for a while and go to My Computer to check if the USB storage device is detected.
Connect your USB storage device to another computer to test if the USB storage device is broken or malfunctions.
I want to restore or undo changes to my computer’s system settings
?
without affecting my personal les or data.
The Windows® System Restore feature allows you to restore or undo changes
to your computer’s system settings without affecting your personal data such as documents or photos. For more details, refer to the section Restoring your system in Chapter 2.
64 Chapter 7: Troubleshooting
Page 67
The picture on the HDTV is distorted.
?
It is caused by the different resolutions of your monitor and your HDTV. Adjust
the screen resolution to t your HDTV. To change the screen resolution:
1. Do any of the following to open the Screen Resolution setting screen:
• Click > Control Panel > Appearance and Personalization > Display > Change display settings.
• Right click anywhere on your Windows desktop. When the pop-up
2. Adjust the resolution. Refer to the documentation came with your HDTV
3. Click Apply or OK. Then click Keep Changes on the conrmation
My speakers produce no sound.
?
Ensure that you connect your speakers to the Line out port (lime) on the front
Check if your speak is connected to a electrical source and turned on.
Adjust your speakers’ volume.
Ensure that your computer’s system sounds are not Muted.
Connect your speakers to another computer to test if the speakers arer
menu appears, click Personalize > Display > Change display settings.
for the resolution.
message.
panel or the rear panel.
If it is muted, the volume icon is displayed as . To enable the system
sounds, click from the Windows notication area, then click .
If it is not muted, click and drag the slider to adjust the volume.
working properly.
The DVD drive cannot read a disc.
?
Check if the disc is placed with the label side facing up.
Check if the disc is centered in the tray, especially for the discs with
non-standard size or shape.
Check if the disc is scratched or damaged.
The DVD drive eject button is not respond.
?
1. Click > Computer.
2. Right-click , then click Eject from the menu.
ASUS CM6340 65
Page 68
Power
Problem Possible Cause Action
Incorrect power voltage
No power (The power indicator is off)
Your computer is not turned on.
Your computer’s power cord is not properly connected.
• Set your computer’s power voltage switch to your area’s power requirements.
• Adjust the voltage settings. Ensure that the power cord is unplugged from the power outlet.
Press the power key on the front panel to ensure that your computer is turned on.
• Ensure that the power cord is properly connected.
• Use other compatible power cord.
PSU (Power supply unit) problems
Try installing another PSU on your computer.
Display
Problem Possible Cause Action
No display output after turning the computer on (Black screen)
The signal cable is not connected to the correct VGA port on your computer.
Signal cable problems Try connecting to another monitor.
• Connect the signal cable to the correct display port (onboard VGA or discrete VGA port).
• If you are using a discrete VGA card, connect the signal cable to the discrete VGA port.
66 Chapter 7: Troubleshooting
Page 69
LAN
Problem Possible Cause Action
Cannot access the Internet
The LAN cable is not connected.
LAN cable problems
Your computer is not properly connected to a router or hub.
Network settings
Problems caused by the anti-virus software
Driver problems Reinstall the LAN driver
Connect the LAN cable to your computer.
Ensure the LAN LED is on. If not, try another LAN cable. If it still does not work, contact the ASUS service center.
Ensure that your computer is properly connected to a router or hub.
Contact your Internet Service Provider (ISP) for the correct LAN settings.
Close the anti-virus software.
Audio
Problem Possible Cause Action
Speaker or headphone is connected to the wrong port.
• Refer to your computer’s user manual for the correct port.
• Disconnect and reconnect the speaker to your computer.
No Audio
ASUS CM6340 67
Speaker or headphone does not work.
The front and back audio ports do not work.
Driver problems Reinstall the audio driver
Try using another speaker or headphone.
Try both the front and back audio ports. If one port failed, check if the port is set to multi-channel.
Page 70
System
Problem Possible Cause Action
Too many programs are running.
System speed is too slow
The system often
hangs or freezes.
Computer virus attack
Hard disk drive failure
Memory module problems
There is not enough air ventilation for your computer.
Incompatible softwares are installed.
Close some of the programs.
• Use an anti-virus software to scan for viruses and repair your computer.
• Reinstall the operating system.
• Send the damaged hard disk drive to ASUS Service Center for servicing.
• Replace with a new hard disk drive.
• Replace with compatible memory modules.
• Remove the extra memory modules that you have installed, then try again.
Move your computer to an area with
better air ow.
Reinstall the OS and reinstall compatible softwares.
68 Chapter 7: Troubleshooting
Page 71
CPU
Problem Possible Cause Action
Your computer is booting up.
Too noisy right after turning on the computer.
Computer is too noisy when in use.
If the problem still persists, refer to your Desktop PC’s warranty card and contact the ASUS Service Center. Visit the ASUS Support site at http://support.asus.com for the service center information.
The BIOS settings have been changed.
Old BIOS version
The CPU fan has been replaced.
There is not enough air ventilation for the computer.
The system temperature is too high.
It is normal. The fan runs on its full speed when the computer is powering on. The fan slows down after entering the OS.
Restore the BIOS to its default settings.
Update the BIOS to the latest version. Visit the ASUS Support site at http://support.asus.com to download the latest BIOS versions.
Ensure that you are using a compatible or ASUS-recommended CPU fan.
Ensure that your computer is
working in an area with good air ow.
• Update the BIOS.
• If you know how to reinstall the motherboard, try to clean the inner space of the chassis.
ASUS CM6340 69
Page 72

ASUS contact information

ASUSTeK COMPUTER INC.
Address 15 Li-Te Road, Peitou, Taipei, Taiwan 11259 Telephone +886-2-2894-3447 Fax +886-2-2890-7798 E-mail info@asus.com.tw Web site www.asus.com.tw
Technical Support
Telephone +86-21-38429911 Online support support.asus.com
ASUS COMPUTER INTERNATIONAL (America)
Address 800 Corporate Way, Fremont, CA 94539, USA Telephone +1-510-739-3777 Fax +1-510-608-4555 Web site usa.asus.com
Technical Support
Telephone +1-812-282-2787 Support fax +1-812-284-0883 Online support support.asus.com
ASUS COMPUTER GmbH (Germany and Austria)
Address Harkort Str. 21-23, D-40880 Ratingen, Germany Fax +49-2102-959911 Web site www.asus.de Online contact www.asus.de/sales
Technical Support
Telephone (Component) +49-1805-010923* Telephone (System/Notebook/Eee/LCD) +49-1805-010920* Support Fax +49-2102-9599-11 Online support support.asus.com
* EUR 0.14/minute from a German xed landline; EUR 0.42/minute from a mobile
phone.
Manufacturer: ASUSTeK Computer Inc. Address: No.150, LI-TE RD., PEITOU, TAIPEI 112,
Authorised representative in Europe:
Address: HARKORT STR. 21-23, 40880 RATINGEN,
70 Chapter 7: Troubleshooting
TAIWAN ASUS Computer GmbH
GERMANY
Page 73
ASUS Essentio Desktop PC
CM6340
Benutzerhandbuch
Page 74
Deutsch
Deutsch
G7503 Erste Ausgabe
Juli 2012
Copyright © 2012 ASUSTeK Computer Inc. Alle Rechte vorbehalten.
Kein Teil dieses Handbuchs, einschließlich der darin beschriebenen Produkte und Software, darf ohne ausdrückliche, schriftliche Genehmigung von ASUSTeK COMPUTER INC. (“ASUS”) in
irgendeiner Form, ganz gleich auf welche Weise, vervielfältigt, übertragen, abgeschrieben, in einem Wiedergewinnungssystem gespeichert oder in eine andere Sprache übersetzt werden.
Produktgarantien oder Service werden nicht geleistet, wenn: (1) das Produkt repariert, modiziert oder abgewandelt wurde, außer schriftlich von ASUS genehmigte Reparaturen, Modizierung oder Abwandlungen; oder (2) die Seriennummer des Produkts unkenntlich gemacht wurde oder fehlt.
ASUS STELLT DIESES HANDBUCH “SO, WIE ES IST”, OHNE DIREKTE ODER INDIREKTE GARANTIEN, EINSCHLIESSLICH, JEDOCH NICHT BESCHRÄNKT AUF GARANTIEN ODER KLAUSELN DER VERKÄUFLICHKEIT ODER TAUGLICHKEIT FÜR EINEN BESTIMMTEN ZWECK, ZUR VERFÜGUNG. UNTER KEINEN UMSTÄNDEN HAFTET ASUS, SEINE DIREKTOREN, VORSTANDSMITGLIEDER, MITARBEITER ODER AGENTEN FÜR INDIREKTE, BESONDERE, ZUFÄLLIGE ODER SICH ERGEBENDE SCHÄDEN (EINSCHLIESSLICH SCHÄDEN AUF GRUND VON PROFITVERLUST, GESCHÄFTSVERLUST, BEDIENUNGSAUSFALL ODER DATENVERLUST, GESCHÄFTSUNTERBRECHUNG UND ÄHNLICHEM), AUCH WENN ASUS VON DER WAHRSCHEINLICHKEIT DERARTIGER SCHÄDEN AUF GRUND VON FEHLERN IN DIESEM HANDBUCH ODER AM PRODUKT UNTERRICHTET WURDE.
SPEZIFIKATIONEN UND INFORMATIONEN IN DIESEM HANDBUCH DIENEN AUSSCHLIESSLICH DER INFORMATION, KÖNNEN JEDERZEIT OHNE ANKÜNDIGUNG GEÄNDERT WERDEN UND DÜRFEN NICHT ALS VERPFLICHTUNG SEITENS ASUS AUSGELEGT WERDEN. ASUS ÜBERNIMMT FÜR EVENTUELLE FEHLER ODER UNGENAUIGKEITEN IN DIESEM HANDBUCH KEINE VERANTWORTUNG ODER HAFTUNG, EINSCHLIESSLICH DER DARIN BESCHRIEBENEN PRODUKTE UND SOFTWARE.
In diesem Handbuch angegebene Produkt- und Firmennamen können u.U. eingetragene Warenzeichen oder Urheberrechte der entsprechenden Firmen sein und dienen nur der Identizierung oder Erklärung zu Gunsten des Eigentümers, ohne Rechte verletzen zu wollen.
72
Page 75
Deutsch
Inhalt
Erklärungen ................................................................................................. 75
Sicherheitsinformationen ............................................................................. 79
Darstellungssystematik ................................................................................ 80
Weitere Informationsquellen ........................................................................ 80
Verpackungsinhalt ....................................................................................... 81
Kapitel 1 Erste Schritte
Willkommen! ................................................................................................ 83
Kennenlernen des Computers ..................................................................... 83
Einrichten Ihres Computers ......................................................................... 86
Ein-/Ausschalten Ihres Computers. ............................................................. 89
Kapitel 2 Verwenden von Windows® 7
Das erste Starten ......................................................................................... 91
Windows® 7 Desktop verwenden ................................................................. 92
Ihre Dateien und Ordner verwalten .............................................................. 94
System wiederherstellen .............................................................................. 96
Computer schützen ...................................................................................... 97
Windows® Hilfe und Support ........................................................................ 98
Kapitel 3 Anschließen von Geräten an Ihren Computer
Anschließen eines USB-Datenträgers ......................................................... 99
Anschließen von Mikrofon und Lautsprechern .......................................... 100
Anschließen von mehreren externen Anzeigegeräten ............................... 103
Anschließen eines HDTV ........................................................................... 105
Deutsch
Kapitel 4 Computer verwenden
Richtige Sitzhaltung beim verwenden des Desktop PCs ........................... 107
Speicherkartenleser verwenden ................................................................ 108
Optisches Laufwerk verwenden ................................................................. 109
Multimedia-Tastatur verwenden (nur an bestimmten Modellen) .................110
Kapitel 5 Einrichten der Internetverbindung
Kabelverbindung .........................................................................................113
Drahtlosverbindung (nur an bestimmten Modellen) ....................................115
73
Page 76
Deutsch
Inhalt
Deutsch
Kapitel 6 Verwenden der Hilfsprogramme
ASUS AI Suite II ..........................................................................................117
ASUS AI Manager ...................................................................................... 123
Ai Charger .................................................................................................. 125
ASUS Webstorage ..................................................................................... 126
ASUS Easy Update ................................................................................... 128
ASUS Instant On ....................................................................................... 129
Nero 9 130
Systemwiederherstellung ........................................................................... 131
Kapitel 7 Problembehandlung
Problembehandlung ................................................................................... 133
74
Page 77
Deutsch

Erklärungen

REACH
Die rechtliche Rahmenbedingungen für REACH (Registration, Evaluation, Authorisation,
and Restriction of Chemicals) erfüllend, veröffentlichen wir die chemischen Substanzen in
unseren Produkten auf unserer ASUS REACH-Webseite unter http://csr.asus.com/english/index.aspx.
Rücknahmeservices
Das ASUS-Wiederverwertungs- und Rücknahmeprogramm basiert auf den Bestrebungen,
die höchsten Standards zum Schutz der Umwelt anzuwenden. Wir glauben, das
die Bereitstellung einer Lösung für unsere Kunden die Möglichkeit schafft, unsere Produkte, Batterien, andere Komponenten und ebenfalls das Verpackungsmaterial
verantwortungsbewußt der Wiederverwertung zuzuführen. Besuchen Sie bitte die Webseite
unter http://csr.asus.com/english/Takeback.htm für Details zur Wiederverwertung in verschiedenen Regionen.
Erklärung der Federal Communications Commission
Dieses Gerät stimmt mit den FCC-Vorschriften Teil 15 überein. Sein Betrieb unterliegt folgenden zwei Bedingungen:
Dieses Gerät darf keine schädigenden Interferenzen erzeugen, und
Dieses Gerät muss alle empfangenen Interferenzen aufnehmen, einschließlich derjenigen, die einen unerwünschten Betrieb erzeugen.
Dieses Gerät ist auf Grund von Tests für Übereinstimmung mit den Einschränkungen eines Digitalgeräts der Klasse B, gemäß Teil 15 der FCC-Vorschriften, zugelassen. Diese Einschränkungen sollen bei Installation des Geräts in einer Wohnumgebung auf angemessene Weise gegen schädigende Interferenzen schützen. Dieses Gerät erzeugt und verwendet Hochfrequenzenergie und kann, wenn es nicht gemäß den Anweisungen des Herstellers installiert und bedient wird, den Radio- und Fernsehempfang empndlich stören. Es wird jedoch nicht garantiert, dass bei einer bestimmten Installation keine Interferenzen auftreten. Wenn das Gerät den Radio- oder Fernsehempfang empndlich stört, was sich durch Aus- und Einschalten des Geräts feststellen lässt, ist der Benutzer ersucht, die Interferenzen mittels einer oder mehrerer der folgenden Maßnahmen zu beheben:
Empfangsantenne neu ausrichten oder an einem anderen Ort aufstellen.
Den Abstand zwischen dem Gerät und dem Empfänger vergrößern.
Das Gerät an die Steckdose eines Stromkreises anschließen, an die nicht auch der Empfänger angeschlossen ist.
Den Händler oder einen erfahrenen Radio-/Fernsehtechniker um Hilfe bitten.
Deutsch
Zur Entsprechung der FCC-Emissionsvorschriften und Vermeidung von Störungen beim Empfang von Radio- und/oder Fernsehsignalen ist die Verwendung eines
abgeschirmten Netzkabels erforderlich. Die Verwendung des beigefügten Netzkabels ist unerläßlich. Veränderungen oder Modikationen, die nicht ausdrücklich von der jeweiligen Entsprechungsbehörde genehmigt wurden, können Ihr Benutzungsrecht für das Gerät
erlöschen lassen.
(Nachdruck aus dem Code of Federal Regulations #47, Teil 15.193, 1993. Washington
DC: Ofce of the Federal Register, National Archives and Records Administration, U.S. Government Printing Ofce.)
75
Page 78
Deutsch
FCC-Sicherheitswarnungen zur RF-Aussetzung
FCC-Sicherheitswarnungen zur RF-Aussetzung
FCC-Sicherheitswarnungen zur RF-Aussetzung
Deutsch
Dieses Gerät entspricht den FCC RF-Aussetzungsbeschränkungen (SAR) in typischen
Dieses Gerät entspricht den FCC RF-Aussetzungsbeschränkungen (SAR) in typischen
Dieses Gerät entspricht den FCC RF-Aussetzungsbeschränkungen (SAR) in typischen tragbaren Ausstattungen. Um den Beschränkungen zu entsprechen, sollten Sie direkten
tragbaren Ausstattungen. Um den Beschränkungen zu entsprechen, sollten Sie direkten
tragbaren Ausstattungen. Um den Beschränkungen zu entsprechen, sollten Sie direkten Kontakt mit der Sendeantenne während der Übertragung vermeiden. Endnutzer müssen
Kontakt mit der Sendeantenne während der Übertragung vermeiden. Endnutzer müssen
Kontakt mit der Sendeantenne während der Übertragung vermeiden. Endnutzer müssen die spezischen Betriebsanleitungen für eine RF-Aussetzung innerhalb der anerkannten
die spezischen Betriebsanleitungen für eine RF-Aussetzung innerhalb der anerkannten
die spezischen Betriebsanleitungen für eine RF-Aussetzung innerhalb der anerkannten
Bereiche befolgen.
Bereiche befolgen.
Bereiche befolgen.
IC-Strahlenbelastungserklärung für Kanada
IC-Strahlenbelastungserklärung für Kanada
IC-Strahlenbelastungserklärung für Kanada
Dieses Gerät erfüllt die IC-Strahlenbelastungsgrenzen für unkontrollierte Umgebungen. Um
Dieses Gerät erfüllt die IC-Strahlenbelastungsgrenzen für unkontrollierte Umgebungen. Um
Dieses Gerät erfüllt die IC-Strahlenbelastungsgrenzen für unkontrollierte Umgebungen. Um die IC-Bestimmungen einzuhalten, vermeiden Sie während des Betriebes direkten Kontakt
die IC-Bestimmungen einzuhalten, vermeiden Sie während des Betriebes direkten Kontakt
die IC-Bestimmungen einzuhalten, vermeiden Sie während des Betriebes direkten Kontakt mit der Sendeantenne. Der Endbenutzer muss den Bedienungsanweisungen Folge leisten,
mit der Sendeantenne. Der Endbenutzer muss den Bedienungsanweisungen Folge leisten,
mit der Sendeantenne. Der Endbenutzer muss den Bedienungsanweisungen Folge leisten, um die Funkfrequenzbelastungsbestimmungen zu erfüllen.
um die Funkfrequenzbelastungsbestimmungen zu erfüllen.
um die Funkfrequenzbelastungsbestimmungen zu erfüllen. Der Betrieb ist abhängig von folgenden zwei Bedingungen:
Der Betrieb ist abhängig von folgenden zwei Bedingungen:
Der Betrieb ist abhängig von folgenden zwei Bedingungen:
• Das Gerät darf keine Interferenzen verursachen und
• Das Gerät darf keine Interferenzen verursachen und
• Das Gerät darf keine Interferenzen verursachen und
• Das Gerät muss jegliche Interferenzen akzeptieren, eingeschlossen Interferenzen, die
• Das Gerät muss jegliche Interferenzen akzeptieren, eingeschlossen Interferenzen, die
• Das Gerät muss jegliche Interferenzen akzeptieren, eingeschlossen Interferenzen, die
Um Funkinterferenzen mit lizenzierten Diensten (z.B. Co-Kanal-Mobile-Satellitensysteme) zu
Um Funkinterferenzen mit lizenzierten Diensten (z.B. Co-Kanal-Mobile-Satellitensysteme) zu
Um Funkinterferenzen mit lizenzierten Diensten (z.B. Co-Kanal-Mobile-Satellitensysteme) zu verhindern, ist das Gerät nicht für den Gebrauch im Freien zugelassen und darf auch nicht in
verhindern, ist das Gerät nicht für den Gebrauch im Freien zugelassen und darf auch nicht in
verhindern, ist das Gerät nicht für den Gebrauch im Freien zugelassen und darf auch nicht in der Nähe von Fenstern betrieben werden, um eine maximale Abschirmung zu gewährleisten.
der Nähe von Fenstern betrieben werden, um eine maximale Abschirmung zu gewährleisten.
der Nähe von Fenstern betrieben werden, um eine maximale Abschirmung zu gewährleisten.
Ausrüstung (oder seine Sendantenne) die im Freien installiert ist, bedarf einer gültigen
Ausrüstung (oder seine Sendantenne) die im Freien installiert ist, bedarf einer gültigen
Ausrüstung (oder seine Sendantenne) die im Freien installiert ist, bedarf einer gültigen
Lizenz.
Lizenz.
Lizenz.
Déclaration d'Industrie Canada relative à l’exposition aux ondes radio
Déclaration d'Industrie Canada relative à l’exposition aux ondes radio
Déclaration d'Industrie Canada relative à l’exposition aux ondes radio
Cet appareil est conforme aux limites d'exposition aux radiations d’Industrie Canada dénies
Cet appareil est conforme aux limites d'exposition aux radiations d’Industrie Canada dénies
Cet appareil est conforme aux limites d'exposition aux radiations d’Industrie Canada dénies
pour un environnement non-contrôlé. Pour maintenir la conformité avec les exigences
pour un environnement non-contrôlé. Pour maintenir la conformité avec les exigences
pour un environnement non-contrôlé. Pour maintenir la conformité avec les exigences
d'exposition RF IC, veuillez éviter tout contact direct avec l'antenne pendant l'émission. Les
d'exposition RF IC, veuillez éviter tout contact direct avec l'antenne pendant l'émission. Les
d'exposition RF IC, veuillez éviter tout contact direct avec l'antenne pendant l'émission. Les utilisateurs naux doivent suivre les instructions de fonctionnement spéciques pour satisfaire la
utilisateurs naux doivent suivre les instructions de fonctionnement spéciques pour satisfaire la
utilisateurs naux doivent suivre les instructions de fonctionnement spéciques pour satisfaire la
conformité aux expositions RF.
conformité aux expositions RF.
conformité aux expositions RF. Son utilisation est sujette aux deux conditions suivantes :
Son utilisation est sujette aux deux conditions suivantes :
Son utilisation est sujette aux deux conditions suivantes :
Cet appareil ne peut pas causer d'interférence, et
Cet appareil ne peut pas causer d'interférence, et
Cet appareil ne peut pas causer d'interférence, et
Cet appareil doit accepter toute interférence, y compris les interférences qui pourraient
Cet appareil doit accepter toute interférence, y compris les interférences qui pourraient
Cet appareil doit accepter toute interférence, y compris les interférences qui pourraient
Pour éviter les interférences radio avec le service sous licence (c'est à-dire le partage de
Pour éviter les interférences radio avec le service sous licence (c'est à-dire le partage de
Pour éviter les interférences radio avec le service sous licence (c'est à-dire le partage de canal avec les systèmes de téléphonie satellite), cet appareil est destiné à être utilisé en
canal avec les systèmes de téléphonie satellite), cet appareil est destiné à être utilisé en
canal avec les systèmes de téléphonie satellite), cet appareil est destiné à être utilisé en intérieur et loin des fenêtres pour fournir un blindage maximal. Tout appareil (ou son antenne
intérieur et loin des fenêtres pour fournir un blindage maximal. Tout appareil (ou son antenne
intérieur et loin des fenêtres pour fournir un blindage maximal. Tout appareil (ou son antenne d'émission) qui est installé en extérieur est sujet à cette licence.
d'émission) qui est installé en extérieur est sujet à cette licence.
d'émission) qui est installé en extérieur est sujet à cette licence.
Wireless-Kanäle für unterschiedliche Gebiete
Wireless-Kanäle für unterschiedliche Gebiete
Wireless-Kanäle für unterschiedliche Gebiete
N. Amerika 2,412-2,462 GHz Kanal 01 bis Kanal 11
N. Amerika 2,412-2,462 GHz Kanal 01 bis Kanal 11
N. Amerika 2,412-2,462 GHz Kanal 01 bis Kanal 11 Japan 2,412-2,484 GHz Kanal 01 bis Kanal 14
Japan 2,412-2,484 GHz Kanal 01 bis Kanal 14
Japan 2,412-2,484 GHz Kanal 01 bis Kanal 14 Europa ETSI 2,412-2,472 GHz Kanal 01 bis Kanal 13
Europa ETSI 2,412-2,472 GHz Kanal 01 bis Kanal 13
Europa ETSI 2,412-2,472 GHz Kanal 01 bis Kanal 13
Veränderungen am Gerät, die nicht ausdrücklich vom Hersteller gebilligt wurden, können
Veränderungen am Gerät, die nicht ausdrücklich vom Hersteller gebilligt wurden, können
Veränderungen am Gerät, die nicht ausdrücklich vom Hersteller gebilligt wurden, können das Nutzungsrecht ungültig werden lassen. “Der Hersteller erklärt, dass dieses Gerät durch
das Nutzungsrecht ungültig werden lassen. “Der Hersteller erklärt, dass dieses Gerät durch
das Nutzungsrecht ungültig werden lassen. “Der Hersteller erklärt, dass dieses Gerät durch spezische, in den USA geprüfte Firmware auf die Kanäle 1 bis 11 beschränkt ist.”
spezische, in den USA geprüfte Firmware auf die Kanäle 1 bis 11 beschränkt ist.”
spezische, in den USA geprüfte Firmware auf die Kanäle 1 bis 11 beschränkt ist.”
einen ungewünschten Gerätebetrieb verursachen.
einen ungewünschten Gerätebetrieb verursachen.
einen ungewünschten Gerätebetrieb verursachen.
causer un fonctionnement non souhaité de l'appareil.
causer un fonctionnement non souhaité de l'appareil.
causer un fonctionnement non souhaité de l'appareil.
76
Page 79
Deutsch
CE-Kennzeichen
CE-Zeichen für Geräte ohne Wireless LAN/Bluetooth
Die ausgelieferte Version dieses Gerätes erfüllt die Anforderungen der EEC directives
2004/108/EC “Electromagnetic compatibility” und 2006/95/EC “Low voltage directive”.
CE-Zeichen für Geräte mit Wireless LAN/ Bluetooth
Diese Ausrüstung erfüllt die Anforderungen der Directive 1999/5/EC of the European Parliament and Commission from 9 March, 1999 governing Radio and Telecommunications Equipment and mutual recognition of conformity.
Dieses Gerät darf in sämtlichen Mitgliedstaaten der EU betrieben werden. In bestimmten Teilen Frankreichs bestehen Einschränkungen des nutzbaren Frequenzbandes. Dieses Gerät sollte nur in Innenräumen eingesetzt werden.
低功率射頻電機設備警語
依據低功率電波輻射性電機管理辦法 第十二條 經型式認證合格之低功率射頻電機,非經許可,公司、商號或使用者均不得擅自 變更頻率、加大功率或變更原設計之特性及功能。 第十四條 低功率射頻電機之使用不得影響飛航安全及乾擾合法通信;經發現有乾擾現象 時,應立即停用,並改善至無干擾時方得繼續使用。 前項合法通信,指依電信法規定作業之無線電通信。 低功率射頻電機須忍受合法通信或工業、科學及醫療用電波輻射性電機設備之干擾。
Deutsch
與5.25GHz 至5.35GHz 區域內操作之
無線設備的警告申明
工作頻率5.250~5.350GHz 該頻率限於室內使用
VCCI: Hinweis zur Konformität in Japan Hinweis zu VCCI, Klasse B
77
Page 80
Deutsch
KC: Wichtige Hinweise zum Einsatz in Korea
Deutsch
Macrovision Corporation-Produktanmerkung
Dieses Produkt verfügt über Kopierschutztechnologie, die durch methodische
Anforderungen bestimmter U.S.A.-Patente und anderer geistiger Eigentumsrechte der
Macrovision Corporation und anderer Parteien geschützt sind. Die Verwendung dieser Kopierschutztechnologie muss von Macrovision Corporation genehmigt werden und ist,
wenn nicht anderweitig von der Macrovision Corporation genehmigt, nur für private
oder eingeschränkte Vorführungszwecke vorgesehen. Reverse-Engineering oder Demontage
ist verboten.
Warnung: Lithium-Ionen-Akkus
CAUTION: Danger of explosion if battery is incorrectly replaced. Replace only with the
same or equivalent type recommended by the manufacturer. Dispose of used batteries according to the manufacturer’s instructions.
VORSICHT! Explosionsgefahr bei unsachgemäßen Austausch der Batterie. Ersatz nur durch denselben oder einem vom Hersteller empfohlenem ähnlichen Typ. Entsorgung
gebrauchter Batterien nach Angaben des Herstellers.
78
Page 81
Deutsch

Sicherheitsinformationen

Bevor Sie das Gerät reinigen, trennen Sie es von der Stromversorgung. Wischen Sie den
Desktop PC mit einem weichen Tuch oder einem Fensterleder ab, das Sie mit einer Lösung aus einem nicht scheuernden Reinigungsmittel und einigen Tropfen warmem Wasser angefeuchtet haben. Wischen Sie verbleibende Feuchtigkeit mit einem trockenen Tuch ab.
NICHT auf ungerade oder instabile Oberächen aufstellen. Bei Beschädigung des
Gehäuses den Kundendienst aufsuchen.
KEINER schmutzigen oder staubigen Umgebung aussetzen. KEIN Betrieb während eines Gaslecks.
KEINE Gegenstände auf die Oberäche fallenlassen und keine Fremdgegenstände in den Desktop PC einführen.
KEINEN magnetischen oder elektrischen Feldern aussetzen.
KEIN Aussetzen oder Betreiben in der nähe von Flüssigkeiten, Regen oder Feuchtigkeit.
KEIN Modembetrieb während eines elektrischen Sturms.
Akku-Sicherheitswarnung: Batterie NICHT in offenes Feuer werfen. Kontakte NICHT
kurzschließen. Den Akku NICHT auseinandernehmen.
Dieses Produkt in Umgebungstemperaturen zwischen 0˚C (32F) und 35˚C (95F)
verwenden.
Die Lufteinlässe des Desktop PCs NICHT abdecken, um eine Überhitzung des Systems zu vermeiden.
KEINE beschädigten Stromkabel, Zubehörteile oder andere Peripheriegeräte verwenden.
Den Kabel zur Vermeidung eine Stromschlags aus der Steckdose herausziehen, bevor
das System bewegt wird.
Suchen Sie Fachpersonal auf, bevor ein Adapter oder Verlängerungskabel verwendet wird. Solche Geräte können den Schutzkreislauf für die Erdung unterbrechen.
• Die Netzteilspannung sollte der örtlichen Stromversorgung entsprechen.
Sie sich über die Spannung der Stromversorgung unsicher sind, wenden Sie sich an Ihren Stromversorger.
Falls das Netzteil ausfällt, reparieren Sie es nicht selbst. Wenden Sie sich an qualiziertes Fachpersonal oder Ihren Händler.
Falls
Deutsch
79
Page 82
Deutsch

Darstellungssystematik

Deutsch
Um sicherzustellen, dass Sie bestimmte Aufgaben richtig ausführen, beachten Sie bitte die
folgenden Symbole und Schriftformate, die in diesem Handbuch verwendet werden.
GEFAHR/WARNUNG: Informationen zum Vermeiden von
Verletzungen beim Ausführen einer Aufgabe.
VORSICHT: Informationen zum Vermeiden von Schäden an den
Komponenten beim Ausführen einer Aufgabe.
WICHTIG: Anweisungen, die Sie beim Ausführen einer Aufgabe
befolgen müssen.
HINWEIS: Tipps und zusätzliche Informationen zur Erleichterung
bei der Ausführung einer Aufgabe.

Weitere Informationsquellen

An den folgenden Quellen nden Sie weitere Informationen und Produkt- sowie Software-
Updates.
ASUS-Webseiten
ASUS-Webseiten enthalten weltweit aktualisierte Informationen über ASUS-Hardware
und Softwareprodukte. Beziehen Sie sich auf die ASUS-Webseite unter www.asus.com.
Vor-Ort Technische Unterstützung Besuchen Sie die ASUS-Webseite unter http://support.asus.com/contact für
Kontaktinformationen der Technischen Unterstützung vor Ort.
80
Page 83
Deutsch

Verpackungsinhalt

Installation Guide
Deutsch
ASUS Essentio Desktop
PC
Netzkabel x1 Installationshilfe x1 Garantiekarte x1
Nero 9 burning software
DVD x1
• Sollten o.g. Artikel beschädigt oder nicht vorhanden sein, wenden Sie sich bitte an Ihren Händler.
• Die oberhalb illustrierten Artikel sind nur als eine Referenz gedacht. Die tatsächlichen Produktspezikationen können sich je nach Modell unterscheiden.
Tastatur x1 Maus x1
Support-DVD (optional) x1
Wiederherstellungs-DVD
(optional) x1
Antennen (optional) x1
81
Page 84
Deutsch
82
Page 85

Kapitel 1

Erste Schritte

Willkommen!

Vielen Dank für den Kauf eines ASUS Essentio CM6340 Desktop PCs! Der ASUS Essentio CM6430 Desktop PC liefert topaktuelle Leistung, unvergleichliche
Zuverlässigkeit und benutzerorientierte Anwendungen. All diese Eigenschaften wurden in diesem verblüffend futuristischen und eleganten Systemgehäuse vereint.
Lesen Sie die ASUS Garantiekarte sorgfältig durch, bevor Sie Ihren ASUS Desktop PC in
Betrieb nehmen.

Kennenlernen des Computers

Abbildungen werden nur zur Ihrer Referenz bereitgestellt. Anschlüsse und deren Platzierung sowie Gehäusefarben variieren mit verschiedenen Modellen.
Vorderseite
2
1
7
6
4
3
5
Deutsch
ASUS CM6340 83
Page 86
Deutsch
Deutsch
1. USB 2.0-Anschlüsse. Diese Universal Serial Bus 2.0 (USB 2.0)-Anschlüsse nehmen
2. Mikrofonanschluss. Dieser Anschluss verbindet mit einem Mikrofon.
3. Kopfhöreranschluss. Dieser Anschluss verbindet mit Kopfhörern oder Lautsprechern.
4. Einschalttaste. Drücken Sie diese Taste, um Ihren Computer einzuschalten.
5. Auswurftaste für optisches Laufwerk.Auswurftaste für optisches Laufwerk. Drücken Sie diese Taste, um das Laufwerk zu
6. Fach für Optisches Laufwerk. In diesem Laufwerksfach bendet sich ein optisches
7. MultiMediaCard- (MMC)/ xD-Picture- (XD)/ Secure Digital™- (SD)/ High Capacity
Rückseite
USB 2.0-Geräte wie Maus, Drucker, Kamera, PDA und andere Geräte auf.
öffnen.
Laufwerk.
Secure Digital™- (SDHC)/ Memory Stick PRO™- (MSP) Kartenschlitz. Stecken Sie
ein unterstütztes Speichermedium in diesen Schlitz.
1 2
16
3 4
5 6
7
10 9 8
1. Stromanschluss.Stromanschluss. Verbinden Sie das Netzkabel mit diesem Anschluss.
2. Spannungswähler.Spannungswähler. Mit diesem Wähler können Sie die richtige Eingangsspannung
einstellen.
3. PS/2-Tastatur-Anschluss (lila). Dieser Anschluss ist für eine PS/2-Tastatur.
4. HDMI-Anschluss.HDMI-Anschluss. Dies ist High-Denition Multimedia Interface (HDMI)-Anschluss
und ist kompatibel mit HDCP, um die Wiedergabe von HD DVD, Blu-Ray und anderen
geschützten Inhalten zu ermöglichen.
5. DVI-D-Anschluss.DVI-D-Anschluss. Dieser Anschluss nimmt DVI-D-kompatible Geräte auf und ist
HDCP-konform. Dies ermöglicht die Wiedergabe von HD DVDs, Blu-Ray Disks und
anderen geschützten Inhalten.
6
11
15
14
13
12
84 Kapitel 1: Erste Schritte
Page 87
Deutsch
6. USB 2.0-AnschlüsseUSB 2.0-Anschlüsse. Diese Universal Serial Bus 2.0 (USB 2.0)-Anschlüsse nehmen
USB 2.0-Geräte wie Maus, Drucker, Scanner, Kamera, PDA und andere Geräte auf.
7. USB 3.0-AnschlüsseUSB 3.0-Anschlüsse. Diese Universal Serial Bus 3.0 (USB 3.0)-Anschlüsse nehmen
USB 3.0-Geräte wie Maus, Drucker, Kamera, PDA und andere Geräte auf.
• Bei der Installation eines Windows® -Betriebssystems verbinden Sie KEINE Tastatur / Maus mit den USB 3.0-Anschlüssen.
• Der Beschränkungen des USB 3.0-Controllers wegen, können USB 3.0-Geräte nur unter
Windows® und nur nach der Installation eines USB 3.0-Treibers verwendet werden.
• USB 3.0-Geräte können nur als Datenspeicher verwendet werden.
• Wir empfehlen Ihnen, für eine schnellere Datenübertragung und bessere Leistung alle
USB 3.0-Geräte mit den USB 3.0-Anschlüssen zu verbinden.
8. Line In-Anschluss (hellblau)Line In-Anschluss (hellblau). Dieser Anschluss verbindet mit Tonband-, CD- oder
DVD-Playern und anderen Audiogeräten.
9. Line Out-Anschluss (hellgrün). Dieser Anschluss verbindet mit Kopfhörern oder
Lautsprechern. In 4-Kanal-, 6-Kanal- und 8-Kanalkongurationen wird dieser Anschluss zum Frontlautsprecherausgang.
10. Mikrofonanschluss (rosa).Mikrofonanschluss (rosa). Dieser Anschluss verbindet mit einem Mikrofon.
Die Funktionen der Audio-Ausgänge in 2, 4, 6 oder 8-Kanalkongurationen entnehmen Sie bitte der folgenden Audio-Kongurationstabelle.
Audio 2, 4, 6, or 8-channel conguration
Deutsch
Anschlüsse
Hellblau (Rückseite) Line In
Hellgrün (Rückseite) Line Out Frontlautsprecher Frontlautsprecher Frontlautsprecher Rosa (Rückseite) Mic In Mic In Bass/Mitte Bass/Mitte Hellgrün (Vorderseite) - - - Seitenlautsprecher
Kopfhörer
2-Kanal
4-Kanal 6-Kanal 8-Kanal
Hinterer
Lautsprecher
Hinterer
Lautsprecher
Hinterer
Lautsprecher
11. Blenden für ErweiterungssteckplätzeBlenden für Erweiterungssteckplätze. Entfernen Sie die Blende beim installieren
einer Erweiterungskarte.
12. ASUS WLAN-Karte (nur an bestimmten Modellen).ASUS WLAN-Karte (nur an bestimmten Modellen). Mit dieser optionalen WLAN-
Karte kann Ihr Computer sich mit einem Drahtlosnetzwerk verbinden.
13. LAN (RJ-45)-Anschluss.LAN (RJ-45)-Anschluss. Dieser Anschluss ermöglicht Gigabit-Verbindungen zu einem
Local Area Network (LAN) mittels eines Netzwerk-Hub.
ACT/LINK
LED-Anzeigen am LAN-Anschluss
Aktivitäts-/Verbindungs- LED Geschwindigkeits-LED Status Beschreibung Status Beschreibung
AUS Nicht verbunden AUS 10Mbps-Verbindung ORANGE Verbunden ORANGE 100Mbps-Verbindung BLINKEND Datenaktivität GRÜN 1Gbps-Verbindung
ASUS CM6340 85
SPEED
LED
LAN-
Anschluss
LED
Page 88
Deutsch
14. VGA-Anschluss.VGA-Anschluss. Dieser Anschluss ist für einen VGA-Monitor oder andere VGA-
Deutsch
15. PS/2-Maus-Anschluss (grün). Dieser Anschluss ist für eine PS/2-Maus.
16. LüftungsöffnungenLüftungsöffnungen. Diese Öffnungen dienen der Luftzirkulation.

Einrichten Ihres Computers

Dieser Abschnitt führt Sie durch das Anschließen üblicher Hardware-Geräte wie einen
externen Monitor, Tastatur, Maus und Stromkabel an Ihren Computer.
Anschließen eines externen Monitors
Verwenden der integrierten Anzeigeanschlüsse
Schließen Sie den Monitor an den integrierten Anzeigeanschluss an.
So verbinden Sie einen externen Monitor mithilfe der integrierten Anzeigeanschlüsse:
1. Verbinden Sie ein VGA-Monitor mit dem VGA-Anschluss oder ein DVI-D-Monitor
2. Schließen Sie den Monitor an die Stromversorgung an.
kompatible Geräte vorgesehen.
Blockieren Sie NICHT die Lüftungsöffnungen im Gehäuse. Stellen Sie immer adäquate Ventilation für Ihren Computer bereit.
mit dem DVI-D-Anschluss oder ein HDMI-Monitor mit dem HDMI-Anschluss auf der Rückseite Ihres Computers.
86 Kapitel 1: Erste Schritte
Page 89
Deutsch
• Falls Ihr Computer mit einer ASUS-Grakkarte ausgestattet wurde, ist die Grakkarte in BIOS als primäres Anzeigegerät eingestellt. Verbinden Sie den Monitor deshalb mit dem Anzeigeausgang der ASUS-Grakkarte.
• Um mehrere externe Monitore mit dem Computer zu verbinden, beziehen Sie sich auf
den Abschnitt Anschließen von mehreren externen Anzeigegeräten in Kapitel 3
dieses Benutzerhandbuchs.
Anschließen einer USB-Tastatur und USB-Maus
Verbinden Sie eine USB-Tastatur und USB-Maus mit den USB-Anschlüssen auf der Rücktafel (Rückseite) Ihres Computers.
Deutsch
ASUS CM6340 87
Page 90
Deutsch
Anschließen des Netzkabels
Deutsch
Verbinden Sie ein Ende des Netzkabels mit dem Stromanschluss auf der Rücktafel
(Rückseite) Ihres Computers und das andere Ende mit der Steckdose.
88 Kapitel 1: Erste Schritte
Page 91
Deutsch

Ein-/Ausschalten Ihres Computers.

Dieser Abschnitt beschreibt, wie Sie den Computer nach dem Einrichten Ein-/Ausschalten können.
Computer einschalten
So schalten Sie den Computer ein:
1. Schalten Sie den Monitor ein.
2. Drücken Sie die Einschalttaste Ihres Computers.
Einschalttaste
3. Warten Sie, bis das Betriebssystem automatisch hochlädt.
Deutsch
Computer ausschalten
So schalten Sie den Computer aus:
1. Schließen Sie alle laufenden Anwendungen.
2. Klicken Sie im Windows®-Desktop auf .
3. Klicken Sie auf (Herunterfahren), um das Betriebssystem
herunterzufahren.
ASUS CM6340 89
Page 92
Deutsch
90 Kapitel 1: Erste Schritte
Page 93

Kapitel 2

Verwenden von Windows® 7

Das erste Starten

Beim ersten Start Ihres Computers erscheint eine Abfolge von Fenstern, um Sie durch die
Konguration der Grundeinstellungen Ihres Windows Windows® 7 Betriebssystems zu führen.
So führen Sie den Erststart aus:
1. Schalten Sie den Computer ein. Warten Sie einige Minuten, bis das Fenster Windows einrichten (Set Up Windows) erscheint.
2. Wählen Sie in der Dropdownliste Ihre Sprache. Klicken Sie auf Weiter (Next).
3. Wählen Sie aus der Dropdownliste Ihr Land (Country) oder Region, Zeit (Time) und
Währung (Currency) sowie Tastatur-Layout (Keyboard Layout). Klicken Sie auf Next (Weiter).
4. Geben Sie einmalige Namen für Benutzername (user name) und Computername (Computer name) ein. Klicken Sie auf Weiter (Next).
5. Geben sie die benötigten Informationen ein, um Ihr Kennwort einzurichten, und klicken
Sie auf Weiter (Next). Sie können auch auf Weiter (Next) klicken und diesen Schritt
ohne ein Kennwort einzugeben zu überspringen.
Falls Sie später einen Benutzernamen oder Kennwort einrichten möchten, beziehen Sie
sich auf den Abschnitt Benutzerkonto und Kennwort einrichten in diesem Kapitel.
6. Lesen Sie sorgfältig die Lizenzbedingungen (License terms). Wählen Sie Ich akzeptiere die Lizenzbedingungen (I accept the license terms) und klicken Sie auf Weiter (Next).
7. Wählen Sie zwischen Empfohlene Einstellungen verwenden (Use recommended settings) oder Nur wichtige Updates installieren (Install important updates only),
um Sicherheitseinstellungen Ihres Computers einzustellen. Um diesen Schritt zu überspringen, wählen Sie Später nachfragen (Ask me later).
8. Überprüfen Sie die Zeit- und Datumseinstellungen. Klicken Sie auf Weiter (Next).
Das System ladet die neuen Einstellungen und startet erneut. Sie können jetzt mit der
Verwendung Ihres Computers beginnen.
Deutsch
ASUS CM6340 91
Page 94
Deutsch

Windows® 7 Desktop verwenden

Deutsch
Das Startmenü verwenden
Das Startmenü ermöglicht Ihnen den Zugang zu Programmen, Anwendungen und anderen nützlichen Elementen auf Ihrem Computer. Ebenso bietet es Ihnen weitere Informationen
über Windows 7 durch die Funktionen von Hilfe und Support (Help and Support).
Elemente im Startmenü ausführen
So führen Sie Elemente im Startmenü aus:
1. Klicken Sie in der Windows®-Taskleiste auf das Startsymbol .
2. Wählen Sie im Startmenü das Element, welches Sie ausführen möchten.
Das Element Getting Started verwenden
Das im Startmenü aufgelistete Element Erste Schritte (Getting Started) enthält Informationen über allgemeine Aufgaben wie das Personalisieren von Windows®, Hinzufügen
neuer Benutzer und Dateitransfer, um Sie mit der Benutzeroberäche von Windows® 7 vertraut zu machen.
So verwenden Sie das Element Erste Schritte:
1. Klicken Sie in der Windows®-Taskleiste auf das Startsymbol , um das Startmenü zu
2. Wählen Sie Erste Schritte (Getting Started). Eine Liste möglicher Aufgaben erscheint.
3. Wählen Sie die gewünschte Aufgabe.
Klicken Sie auf das Startsymbol > Hilfe und Support (Help and Support), um weitere Informationen über Windows® 7 zu erhalten.
Sie können Programme, die Sie dauerhaft im Startmenü anzeigen möchten, an das Startmenü anheften. Für weitere Details beziehen Sie sich auf den Abschnitt Programme
an Startmenü oder Taskleiste anheften in diesem Kapitel.
öffnen.
Taskleiste verwenden
Die Taskleiste ermöglicht das Starten und die Verwaltung der auf Ihrem Computer installierten Programme oder Elemente.
Ein Programm aus der Taskleiste starten
So starten Sie ein Programm aus der Taskleiste:
Klicken Sie auf ein Symbol in der Windows®-Taskleiste, um es zu auszuführen. Klicken
Sie erneut auf das Symbol, um das Programm auszublenden.
Sie können Programme, die Sie dauerhaft anzeigen möchten, an die Taskleiste anheften. Für weitere Details beziehen Sie sich auf den Abschnitt Programme an Startmenü oder
Taskleiste anheften in diesem Kapitel.
92 Kapitel 2: Verwenden von Windows® 7
Page 95
Deutsch
Elemente an die Sprunglisten anheften
Ein Rechtsklick auf ein Symbol in der Taskleiste ladet die Sprungliste (Jumplist), um Ihnen
einen Schnellzugang zu Bezugslinks eines Programms oder Elements zu erleichtern. Sie
können Elemente wie Webseiten-Favoriten, oft verwendete Ordner oder Laufwerke sowie
kürzlich abgespielte Mediendateien an die Sprungliste (Jumplist) anheften.
So heften Sie Elemente an die Sprungliste an:
1. Klicken Sie mit der rechten Maustaste ein Symbol in der Taskleiste an.
2. Klicken Sie mit der rechten Maustaste auf das gewünschte Element in der Sprungliste
und wählen Sie An diese Liste anheften (Pin to this list).
Elemente von der Sprungliste lösen
So lösen Sie Elemente von der Sprungliste:
1. Klicken Sie mit der rechten Maustaste ein Symbol in der Taskleiste an.
2. Klicken Sie mit der rechten Maustaste auf das gewünschte Element in der Sprungliste
und wählen Sie Von dieser Liste lösen (Unpin from this list).
Programme an Startmenü oder Taskleiste anheften
So heften Sie Programme ans Startmenü oder Taskleiste an:
1. Klicken Sie in der Windows®-Taskleiste auf das Startsymbol , um das Startmenü zu laden.
2. Klicken Sie mit der rechten Maustatste auf das Gewünschte Element.
3. Wählen Sie An Taskleiste anheften (Pin to Taskbar) oder An Startmenü anheften (Pin to Start menu).
Deutsch
Sie können auch das Symbol eines aktuell ausgeführten Programms mit der rechten Maustaste anklicken und Dieses Programm an Taskleiste anheften (Pin this program to
taskbar) auswählen.
Programme vom Startmenü lösen
So lösen Sie Programme vom Startmenü:
1. Klicken Sie in der Windows®-Taskleiste auf das Startsymbol , um das Startmenü zu laden.
2. Klicken Sie mit der rechten Maustaste auf das gewünschte Programm in der Startmenü
und wählen Sie Von dieser Liste lösen (Unpin from this list).
Programme von der Taskleiste lösen
So lösen Sie Programme von der Taskleiste:
1. Klicken Sie in der Taskleiste das gewünschte Programm mit der rechten Maustaste an
und wählen Sie Dieses Programm von der Taskleiste lösen (Unpin this program from taskbar).
ASUS CM6340 93
Page 96
Deutsch
Deutsch
Infobereich verwenden
In der Standardeinstellung sind folgende Symbole im Infobereich aufgelistet:
Warnnachricht anzeigen
So zeigen Sie eine Warnnachricht an:
Klicken Sie auf das Benachrichtigungssymbol und dann auf die Nachricht, um
Symbole und Benachrichtigungen anpassen
Sie können die Symbole und Benachrichtungen in der Taskleiste oder im Infobereich wahlweise ein- oder ausblenden.
So passen Sie Symbole und Benachrichtungen an:
1. Klicken Sie im Infobreich auf das Pfeilsymbol .
2. Klicken Sie auf Anpassen (Customize).
3. Wählen Sie in der Dropdownliste die gewünschte Verhaltensweise von Symbolen oder
Benachrichtigung für Wartungscenter
Hier können Sie durch das Anklicken dieses Symbols Warnnachrichten/Benachrichtigungen
anzeigen und das Windows®-Wartungscenter laden.
Netzwerkverbindung
Dieses Symbol zeigt den Verbindungsstatus und Signalstärke der Kabel- oder Drahtlos­Netzwerkverbindung.
Lautstärke
Zur Einstellung der Lautstärke klicken Sie auf dieses Symbol.
diese anzuzeigen.
Für weitere Details beziehen Sie sich auf den Abschnitt Windows®-Wartungscenter
verwenden in diesem Kapitel.
Elementen, die Sie anpassen möchten.

Ihre Dateien und Ordner verwalten

Windows® Explorer verwenden
Mit Windows® Explorer können Sie Ihre Dateien und Ordner ansehen, verwalten und organisieren.
Windows® Explorer öffnen
So öffnen Sie den Windows Explorer:
1. Klicken Sie in der Windows®-Taskleiste auf das Startsymbol , um das Startmenü zu laden.
2. Klicken Sie auf Computer, um den Windows Explorer zu öffnen.
94 Kapitel 2: Verwenden von Windows® 7
Page 97
Deutsch
Dateien und Ordner durchsuchen
So durchsuchen Sie Dateien und Ordner:
1. Öffnen sie Windows Explorer.
2. Suchen Sie im Navigations- oder Ansichtsbereich nach dem Ort Ihrer Daten.
3. Klicken Sie in der Breadcrumb-Leiste auf den Pfeil, um den Inhalt eines Laufwerks
oder Ordners anzuzeigen.
Datei-/Ordneransicht anpassen
So passen Sie die Datei-/Ordneransicht an:
1. Öffnen Sie Windows Explorer.
2. Wählen Sie im Navigationsbereich den Ort Ihrer Daten.
3. Klicken Sie in der Symbolleiste auf das Symbol Ansicht .
4. Bewegen Sie den Auswahlregler im Ansichtsmenü, um die Ansicht der Datei oder des
Ordners anzupassen.
Sie können auch mit der rechten Maustaste den Ansichtsbereich irgendwo anklicken,
Ansicht (View) wählen und die gewünschte Ansichtsart bestimmen.
Dateien ordnen
So ordnen Sie Dateien:
1. Öffnen Sie Windows Explorer.
2. Klicken Sie im Feld Anordnen (Arrange by), um die Dropdownliste anzuzeigen.
3. Wählen Sie die gewünschte Anordnungsart.
Deutsch
Dateien sortieren
So sortieren Sie Dateien:
1. Öffnen Sie Windows Explorer.
2. Rechtsklicken Sie irgendwo im Ansichtsbereich.
3. Wählen Sie im erschienenen Kontextmenü Sortieren (Sort by) und dann die von
Ihnen gewünschte Sortierungsmethode.
Dateien gruppieren
So gruppieren Sie Dateien:
1. Öffnen Sie Windows Explorer.
2. Rechtsklicken Sie irgendwo im Ansichtsbereich.
3. Wählen Sie im erschienenen Kontextmenü Gruppieren (Group by) und dann die von
Ihnen gewünschte Gruppierungsmethode.
ASUS CM6340 95
Page 98
Deutsch
Deutsch
Neuen Ordner hinzufügen
So fügen Sie einen neuen Ordner hinzu:
1. Öffnen Sie Windows Explorer.
2. Klicken in der Taskleiste auf Neuer Ordner (New folder).
3. Wählen Sie einen Namen für den neuen Ordner.
Dateien sichern
Ein Backup erstellen
So erstellen Sie ein Backup:
1. Klicken Sie auf > Alle Programme (All Programs) > Wartung (Maintenance) >
2. Klicken Sie auf Sicherung einrichten (Set up backup). Klicken Sie auf Weiter (Next).
3. Wählen Sie einen Zielort für Ihren Backup. Klicken Sie auf Weiter (Next).
4. Wählen Sie entweder Auswahl durch Windows (empfohlen) (Let Windows choose
Sie können auch den Ansichtsbereich mit der rechten Maustaste anklicken und
Neu (New) > Ordner (Folder) wählen.
Sichern und wiederherstellen (Backup and Restore).
(recommended)) oder Auswahl durch Benutzer (Let me choose) für Ihren Backup.
Falls Sie Auswahl durch Windows auswählen, wird Windows keine Programme, FAT- formatierte Dateien, Papierkorbdateien oder Temporäre Dateien von 1GB oder mehr
sichern.
5. Folgen Sie den Bildschirmanweisungen, um den Vorgang abzuschließen.

System wiederherstellen

Die Funktion Windows®-Systemwiederherstellung legt einen Wiederherstellungspunkt an, in dem die Systemeinstellungen des Computers an einem Zeitpunkt/Datum gespeichert
werden. Dies erlaubt Ihnen die Wiederherstellung oder das Rückgängigmachen von
Änderungen Ihres Computersystems, ohne dass Ihre persönlichen Daten betroffen werden.
So stellen Sie das System wieder her:
1. Schließen Sie alle laufenden Anwendungen.
2. Klicken Sie auf > Alle Programme (All Programs) > Zubehör (Accessories) > Systemprogramme (System Tools) > Systemwiederherstellung (System Restore).
3. Folgen Sie den Bildschirmanweisungen, um den Vorgang abzuschließen.
96 Kapitel 2: Verwenden von Windows® 7
Page 99
Deutsch

Computer schützen

Windows® 7-Wartungscenter verwenden
Windows® 7-Wartungscenter hilft Ihnen bei Warnnachrichten und bietet Sicherheits-
informationen, Informationen zur Systemwartung sowie die Möglichkeit einer automatischen Problembehandlung und Behebung häug auftretender Computerprobleme.
Sie könne die Benachrichtungen selbst anpassen. Für weitere Details beziehen Sie sich
auf den vorherigen Abschnitt Symbole und Benachrichtigungen anpassen in diesem Kapitel.
Windows® 7-Wartungscenter ausführen
So führen Sie Windows® 7-Wartungscenter aus:
1. Klicken Sie zum Ausführen des Windows 7-Wartungscenter auf das Symbol im
Infobereich und dann auf Wartungscenter öffnen (Open Action Center).
2. Klicken Sie im Windows 7-Wartungscenter auf die Aufgabe, die Sie ausführen möchten.
Windows® Update verwenden
Windows Update erlaubt Ihnen den Abruf und Installation der neuesten Updates, um die
Sicherheit und Leistung Ihres Computers zu verbessern.
Windows® Update ausführen
So führen Sie Windows® Update aus:
1. Klicken Sie in der Windows®-Taskleiste auf das Startsymbol , um das Startmenü zu laden.
2. Wählen Sie Alle Programme (All Programs) > Windows Update.
3. Klicken Sie im Windows Update-Fenster auf die Aufgabe, die Sie ausführen möchten.
Deutsch
Benutzerkonto und Kennwort erstellen
Sie können für andere Personen, mit Zugriff auf Ihren Computer, weitere Benutzerkonten
sowie Kennwörter erstellen.
Ein Benutzerkonto erstellen
So können sie ein Benutzerkonto erstellen:
1. Klicken Sie in der Windows®-Taskleiste auf > Erste Schritte (Getting Started) > Neue Benutzer hinzufügen (Add new users).
2. Wählen Sie Anderes Konto verwalten (Manage another account).
3. Wählen Sie Neues Konto erstellen (Create a new account).
4. Geben Sie den neuen Benutzernamen ein.
5. Wählen Sie den Benutzertyp, entweder Standardbenutzer (Standard user) oder
Administrator.
6. Zum Fertigstellen klicken Sie auf Konto erstellen (Create Account).
ASUS CM6340 97
Page 100
Deutsch
Benutzerkennwort erstellen
So erstellen Sie ein Benutzerkennwort:
1. Wählen Sie den Benutzer, für den Sie ein Kennwort erstellen möchten.
2. Wählen Sie Kennwort erstellen (Create a password).
3. Geben Sie ein Kennwort ein und bestätigen Sie es. Geben Sie ein Kennworthinweis
4. Zum Fertigstellen klicken Sie auf Kennwort erstellen (Create password).
Antivirus-Software aktivieren
Trend Micro Internet Security ist eine auf Ihren Computer vorinstallierte Antivirus-Software.
Nach der Aktivierung können Sie es 60 Tage lang Probenutzen und eine lizenzierte Version erwerben, nachdem die Probezeit abgelaufen ist.
So aktivieren Sie Trend Micro Internet Security:
1. Führen Sie die Anwendung Trend Micro Internet Security aus.
2. Lesen Sie sorgfältig die Lizenzbedingungen (License terms). Klicken Sie auf
3. Geben Sie Ihre E-Mail-Adresse und Ihren Standort ein. Klicken Sie auf Weiter (Next).
4. Klicken Sie auf Fertigstellen (Finish), um die Aktivierung abzuschließen.

Windows® Hilfe und Support

Windows® Hilfe und Support bietet Ihnen Anleitungen und Antworten für die Verwendung der Anwendungen auf der Windows® 7-Plattform.
ein.
Zustimmen & Aktivieren (Agree & Activate).
Um Windows® Hilfe und Support zu laden, klicken Sie auf > Hilfe und Support (Help and Support).
Stellen Sie sicher, dass Sie mit dem Internet verbunden sind, um die aktuellste Windows®-
Onlinehilfe abrufen zu können.
98 Kapitel 2: Verwenden von Windows® 7
Loading...