Astro 7445 User Manual [en, es, fr]

7445

45pcs. TIRE REPAIR TOOL KIT

www.astrotools.com

1 YEAR LIMITED WARRANTY

•Astro Pneumatic Tool Co. warrants our products to the original user against defective material or workmanship for a period of 1 year from the date of 1st use. Astro reserves the right to determine whether the product failed because of defective material, workmanship or other causes and to charge back for missing parts. Astro Pneumatic Tool Co., at its discretion, will repair products covered under this warranty free of charge. The original user is to return the product (with the exceptions listed below) with the distributor’s name, address, adequate proof of date of purchase or a copy of warranty card, and a short note explaining the problem. Failures caused

by accident, alteration, or misuse are not covered by this warranty.

•If one part of this product fails, please do not return the entire product. Astro will replace free of charge component parts of this product that fail within 1 year of first use by the original user. Items included in this category include but are not limited to kits, hand tool kits and any other product where there are multiple items or components that make up the unit. Please contact the phone number below in order to obtain the replacement components covered under warranty.

•Astro Pneumatic Tool Co. or its authorized service representatives must perform all warranty repairs. Any repair to the product by unauthorized service representatives voids this warranty. The rights under this warranty are limited to the original user and may not be transferred to subsequent owners.

•This warranty is in lieu of all other warranties, expressed or implied, including warranties of merchantability and fitness for a particular purpose. Some states do not allow the exclusion of limitations of incidental or consequential damages so the above limitations may not apply to you.

PLEASE DO NOT RETURN ANY PRODUCT WITHOUT CALLING

1-800-221-9705 FOR INSTRUCTIONS

Unpacking

When unpacking, check the parts diagram and part number listing on page 3 to make sure all parts are included. If any parts are missing or damaged, please call your distributor.

Product Information

Set Includes:

• 1pc - Heavy-Duty Steel T-handle Insert Tool

• 1pc - Heavy-Duty Steel T-handle Spiral Probe Reamer

• 2pc - Replacement tool - 3mm Allen Wrench

• 40pc - 4" Tire Repair String ( Tire Plug )

• 1pc - Lubricant

Important

45pcs. TIRE REPAIR TOOL KIT

MADE IN CHINA

Page 1

INSTRUCTIONS:

7445

45pcs. TIRE REPAIR TOOL KIT

1. Insert the Heavy-Duty Steel T-handle Spiral Probe Reamer into the punctured tread at a slight angle then straighten the reamer and push the tapered shaft in and out of the hole several times to expand and enlarge the broken steel cord.

2-1

2-2

2. Prepare Heavy-Duty Steel T-handle Insert Tool for insertion by first dipping the tip into the lubricant. 2-1 Next insert the tire repair string (tire plug) through the hole in the installer tool. 2-2 Make sure that the tire repair string (tire plug) is fairly well centered in the shaft prior to installation.

5. After airing up the tire to its correct tire pressure spray the tire repaired area with a soapy water and check that the puncture is sealed and not leaking.

3. Insert the tire repair string (tire plug) into the hole and push straight down on the insert tool handle till the ends of the tire repair string (tire plug ) are sticking out of the tire ½ to 1" (13-25mm).

Page 2

4. Pull the Heavy-Duty Steel T-handle Insert Tool straight out of the hole till the tip is just even with the tire tread then cut the exposed tire plug ends just slightly above the tread and remove the installation tool.

+ 1 hidden pages