5400LN SERIES
GRADE 1 LEVER CYLINDRICAL LOCKSETS
CYLINDRICAL
5400LN
CATALOG
LOCK
RUGGED YET REFINED
Designed for industrial, commercial and institutional use, Yale’s 5400LN
Series heavy-duty cylindrical lockset offers no compromise when it comes
to rugged reliability and performance. With key construction features,
such as our patented Free Wheeling lever mechanism, wear-resistant
chassis plates, heavy-duty lever return springs and through-bolting, this
Grade 1 trendsetter proves time and again why it’s the favorite among
architects and building owners who demand the highest standard of
product quality.
And who says a lockset can’t be tough and look good at the same time?
The 5400LN features three aesthetic lever designs and a diverse line of
eleven architectural finishes, including three PVD lifetime finishes, which
allow the freedom of enhancing any décor. With a lifetime warranty
against lever sag and lever spring breakage, you’ll never have to worry
about your intended attraction becoming an unintended distraction.
Page 2
Introduction . . . . . . . . . . . . . 2
Features . . . . . . . . . . . . . . . . .3
Lever Designs . . . . . . . . . . . . 4
Lockset Functions . . . . . . . 5-7
Cylinders . . . . . . . . . . . . . . 8-9
Electrified . . . . . . . . . . . . . . .10
Latchbolts . . . . . . . . . . . . . . 11
Strikes . . . . . . . . . . . . . . . . .12
Suggested Specification . . . . 13
Ordering Information . . . . . 14
CONTENTS
5400LN Series Cylindrical Lock
FINISHES
ANSI
Code
Finish
605* Bright Brass, PVD
606* Satin Brass, PVD
609
Satin Brass, Blackened, Satin
Relieved, Clear Coated
612 Satin Bronze, Clear Coated
613
Satin Bronze, Oxidized and
Oil Rubbed
613e*
Satin Bronze, Oxidized and
Oil Rubbed, PVD
616
Satin Bronze, Blackened, Satin
Relieved, Clear Coated
619
Satin Nickel Plated, Clear
Coated
625 Bright Chrome Plated
626 Satin Chrome Plated
693 Black Powder Coat
FREE WHEELING LEVER TRIM
All 5400LN locking functions
feature the patented (Patent No.
4920773) Free Wheeling lever
mechanism. When the outside
lever is locked, it will rotate freely
up and down while remaining
securely locked.
A.D.A.
The 5400LN meets accessibility
guidelines of the Americans with
Disabilities Act and the
requirements of the Uniform
Federal Accessibility Standards and
ANSI 117.1, all requiring ease of
accessibility for the handicapped.
INSTALLATION
Fits ANSI Spec. 115.2, which
covers Hollow Metal Doors and
Frame Preparation for Cylindrical
Locksets, and doors with ANSI
Spec A115.18 “Spider Cut Out.”
WARRANTY
The 5400LN Key-in-Lever
cylindrical lock carries a
comprehensive five-year warranty.
Likewise, the lockset carries a
lifetime warranty against lever sag
and lever spring breakage. Ask
your Yale sales representative for
complete warranty information.
ISO 9001
Designed and
manufactured in
a certified ISO 9001
facility.
*PVD finish standard on 605 and 606.
Available as an option on 613 (as 613e)
for customers desiring a non-wearing
finish.
PVD LIFETIME FINISH
Physical Vapor Deposition (PVD)
is a technologically advanced finish
coating that provides the ultimate
surface protection against
environmental elements and
everyday wear and tear. PVD
matches clear coated finishes in
appearance, yet surpasses them in
durability. Yale warrants all its
PVD finishes against corrosion,
tarnish, wear, discoloring and
peeling for the lifetime of the part
to which it has been applied. Ask
your sales representative for
specific warranty information.
FEATURES
Page 3
5400LN Series Cylindrical Lock
FIRE LISTINGS
UL - cUL Fire Label for all door
functions up to 3 hours.
ANSI
ANSI A156.2, 1996 Series 4000
Grade 1.
DOOR THICKNESS
The 5400LN fits doors from
1-3/4" to 2-1/4" thick. It can be
used on 1-3/8" thick doors by
adding two spacer plates
P/N 14-5401-6644.
FULL-FEATURED GRADE 1 LEVER LOCKSET OFFERING:
•Patented Free Wheeling lever mechanism increases vandal resistance and reduces the amount of
maintenance typically required of locksets with rigid levers.
• 11 finish options.
•3 lever designs
• 19 functions.
•Stainless steel latchbolt provides added strength and wear resistance. Direct 1/2" throw is standard.
• A 3/4" latch throw for fire-rated or pairs of doors is available.
• Wear-resistant plates in the chassis help extend the life of the lockbody and provide smoother lock operation.
• Longer through-bolts through the chassis provide greater stability and prevent rotation.
• Lifetime warranted heavy-duty lever return springs prevent lever sag and provide positive return of lever to
horizontal position.
• Door adjustable rose support plates allow for easy adjustment of lockset to fit doors ranging in thickness
from 1-3/4" to 2-1/4". Rose spacers available for 1-3/8" thick doors.
• Three non-handed lever options (Augusta, Monroe, and Pacific Beach) comply with ADA requirements for
easy gripping and operation.
• Expanded cylinder and keying options:
-Yale
®
6- and 7-pin standard and interchangeable core cylinders including Yale®KeyMark®patented
keyway cylinders (see page 8).
-Standard cylinders with Schlage
®
C and Sargent®LA keyways.
-Levers which accept interchangeable core cylinders by Best
®
, Corbin Russwin, Schlage®and Medeco®and ASSA®.
• 3-1/2" roses cover new ANSI hollow metal door cutout.
Stainless Steel
Latchbolt
Adjustable
Rose Plates
Heavy-Duty
Lever Return
Springs
Solid Brass
Pin Tumbler
Cylinder
Multiple Keying
Options
3-1/2" Rose
Anti-Rotation
Through-Bolts
Free Wheeling
Patented Lever
Mechanism
LEVER DESIGNS
Page 4
5400LN Series Cylindrical Lock
Lever: Cast Solid
Rose: Cold Forged Brass, Bronze
Lever: Cast Solid
Rose: Cold Forged Brass, Bronze
Lever: Cast Solid
Rose: Cold Forged Brass, Bronze
Dimensions are shown in inches (millimeters). ** See page 8 and 9 for interchangeable core cylinder order options.
AU
AU**
MO MO**
PB
PB**
3-1/2"
(89)
5-7/16"
(138)
3-3/64"
(77)
3-1/2"
(89)
5-7/16"
(138)
3-1/8"
(79)
3-1/2"
(89)
5-1/4"
(133)
3-1/8"
(79)
2-9/16"
(65)
AUGUSTA
MONROE
PACIFIC BEACH
LOCKSET FUNCTIONS
Page 5
5400LN Series Cylindrical Lock
* Lever handles are Free-Wheeling in locked position. Shaded area denotes Free-Wheeling lever.
5401LN (F75) 5402LN (F76) 5403LN (F77)
Passage or Closet Lock
•For doors that do not require locking.
•Either lever operates latchbolt at all
times.
Privacy Bedroom or Bath Lock
•For lavatory or other privacy doors.
•Either lever operates latchbolt unless
outside lever is locked by pushbutton
inside.*
•Button automatically releases when
inside lever is turned or door is closed.
•Emergency release in outside lever.
Emergency key supplied.
(PN 14-5302-1053-048)
•Inside lever always active.
Patio or Privacy Lock
•For exit doors with limited entry.
• Deadlocking latchbolt.
•Either lever operates latchbolt unless
outside lever is locked by pushbutton
inside.*
•Button automatically releases when
inside lever is turned or door is closed.
•Inside lever always active.
Outside Inside Outside Inside Outside Inside
5404LN (F82) 5405LN (F86) 5406LN (F92)
Entry Lock
•For entrance or office doors.
• Deadlocking latchbolt.
•Either lever operates latchbolt (except
when outside lever is locked from
inside).*
•Pushing button in inside lever locks
outside lever. (Automatically releases
when inside lever is turned or key is
rotated in locked outside lever.)
• Latchbolt is operated by key in outside
lever or by rotating inside lever.
•Inside lever always active.
Storeroom or Closet Lock
•For use on storeroom, utility, and exit
doors.
• Deadlocking latchbolt.
• Latchbolt operated by lever inside, key
in outside lever.
•Outside lever always locked.*
•Inside lever always active.
Service Station Lock
• Deadlocking latchbolt.
•Either lever operates latchbolt.
• Pushbutton in inside lever locks outside
lever. (Automatically releases when
inside lever is turned, door is closed or
key is rotated in outside lever, except
when slotted pushbutton is rotated 90˚
clockwise to retain outside lever in
locked position.)*
• Latchbolt operated by key in outside
lever, inside lever always active.
Outside Inside Outside Inside Outside Inside
LOCKSET FUNCTIONS
Page 6
5400LN Series Cylindrical Lock
* Lever handles are Free-Wheeling in locked position. Shaded area denotes Free-Wheeling lever.
5407LN (F109) 5408LN (F84) 5409LN (F89)
Entrance or Corridor Lock
•For entrance, general home or office
doors.
• Deadlocking latchbolt.
•Either lever operates latchbolt (except
when outside lever is locked from
inside).*
•Pushing turn button in inside lever
locks outside lever, and automatically
releases when inside lever is turned or
key is ro tated in locked outside lever.
•Outside lever may be retained in
locked position by pushing and rotating
turn button 90° clockwise to a
horizontal position; not released until
turn button is manually returned to the
vertical position.
• Latchbolt is operated by key in outside
lever or by rotating inside lever.
•Inside lever always active.
Classroom Lock
•For classroom or utility room doors.
• Deadlocking latchbolt.
•Either lever operates latchbolt (except
when outside lever is locked by key).*
•Inside lever always active.
•Outside lever locked* or unlocked only
by key.
Exit Lock
•For exit doors with no-entry desired.
• Deadlocking latchbolt.
•Outside lever always locked.*
•Inside lever always active.
Outside Inside Outside Inside Outside Inside
5418LN 5417N (F88) 5418LN (F110)
Classroom Intruder Lock
•For classroom doors.
• Deadlocking latchbolt.
•Either lever operates latchbolt (except
when outside lever is locked by key in
either lever).
•Outside lever remains locked upon
egress.
•Inside lever always active.
Apartment, Exit or Public Toilet Lock
•For office or apartment building
entrance doors or lavatory doors.
• Deadlocking latchbolt.
•Either lever operates latchbolt (except
when outside lever is locked by key
from inside).*
•Key in outside lever operates
latchbolt.
•Inside lever always active.
NOTE: Inside handle requires 1802S
standard 6-pin cylinder.
Intruder Classroom Security Lock
•For classroom doors.
• Deadlocking latchbolt.
•Either lever operates latchbolt (except
when outside lever is locked by key
from either side).
•Key either inside or outside locks or
unlocks outside lever.
•Inside lever always active.
Outside Inside Outside Inside Outside Inside
LOCKSET FUNCTIONS
Page 7
5400LN Series Cylindrical Lock
* Lever handles are Free-Wheeling in locked position. Shaded area denotes Free-Wheeling lever.
5421LN (F80) 5422LN (F90) 5425LN
Communicating Lock
•For communicating or store
entrance doors.
• Deadlocking latchbolt.
•Either lever operates
latchbolt (except when key
in either lever locks or
unlocks the lever
independently of the
other).*
•Should be used only in
offices or rooms with
multiple entries.
NOTE: Not available with IC
core cylinders.
Dormitory Lock
• Deadlocking latchbolt.
•Either lever operates
latchbolt (except when
outside lever is locked by
inside pushbutton or key in
outside lever).* Inside lever
always active.
•When locked by button, the
button automatically
releases when inside lever
is turned or door is closed.
•When locked by key, the
automatic release is made
inoperative and must be
manually unlocked by the
key.*
Privacy Lock
•For lavatory or other privacy doors.
•Either lever operates latchbolt (except when outside lever is
locked by inside pushbutton).*
• Button automatically releases by turning inside lever or
closing door.
•Door can be unlocked, when necessary, by operating outside
turnbutton.
•No emergency key required.
Outside Inside Outside Inside Outside Inside
5428LN 5429LN 5430LN (F87)
455LN
Exit Latch
•For twin communicating or
exit doors where one side
operation is required.
•Use where space is
limited.
• Deadlocking latchbolt.
•One lever operation.
•Blank rose.
•Should be used only where
rooms have more than one
entrance.
Communicating or Closet
Lock
•For twin communicating or
closet doors where one side
operation or space between
doors is limited.
• Deadlocking latchbolt.
•Inside lever operates
latchbolt except when lever
is locked by key.*
(Not available with IC core
cylinders.)
Utility,Asylum or
Institutional Lock
• Deadlocking latchbolt.
• Latchbolt operated by key in
lever from either side.
•Both levers always locked.*
(Not available with IC core
cylinders.)
Dummy Trim
•For non-operational lever
use for decorative trim.
Outside Inside Outside Inside Outside Inside Outside Inside
CYLINDERS
Page 8
5400LN Series Cylindrical Lock
CYLINDER OPTIONS
The following selection guide indicates the correct key-in-lever cylinder for each locking segment.
SECURITY CYLINDERS
The patented Yale®Security Cylinder
(Patent No. 4638651) contains two
independent locking mechanisms. The first
is a traditional 6- or 7-pin tumbler
mechanism with spool drivers for greatly
increased picking resistance.
The second is an innovative 5-tumbler
rotating disc mechanism with sidebar
engagement. The rotating discs are spring
loaded and block the bottom of the keyway.
Illustration
Lockset Series:
5400LN
Types of Cylinder Mechanisms
Conventional Patented Keyway Security High Security
Cylinder Types
Fixed Core 6-pin 7-pin 6-pin 7-pin 6-pin 7-pin 6-pin 7-pin
Key-In-Knob 1802 1802A K402 K402 5802 5802A N/A N/A
Interchangeable Core
LFIC 1210 N/A K800 N/A 5210 5220 N/A N/A
SFIC N/A N/A K600 N/A N/A N/A N/A N/A
Refer to Yale®KeyMark®and/or Cylinders and Keys Catalog sections for all details and
how to order examples.
1802
1210
PATENTED KEYWAY CYLINDERS
For those applications requiring patented key control, Yale's KeyMark
®
line of patented keyway cylinders
provides the ultimate protection against unauthorized key duplication. Yale KeyMark's utility-patented
Security Leg
®
keyway features increased resistance against picking and impressioning and can easily retrofit
into existing systems. For further details and availability, refer to the separate Yale KeyMark catalog.
CYLINDERS
Page 9
5400LN Series Cylindrical Lock
LEVERS ACCEPTING COMPETITORS’ INTERCHANGEABLE CORE CYLINDERS
Interchangeable
Core System
Prefix Ordering Example
Best® B (i.e. B-AU, B-PB, B-MO) B-AU5407LN x 626
Schlage
®
SI (i.e. SI-AU, SI-PB)* SI-AU5407LN x 626
Corbin Russwin R (i.e. R-AU, R-PB)* R-AU5407LN x 626
Medeco®, ASSA
®
M (i.e. M-AU)** M-AU5407LN x 626
107S SCHLAGE®CYLINDER ADAPTER KIT
Used to modify Schlage cylinder for fit in the 5400LN.
P/N 14-5407-0300-048
SCHLAGE®C & SARGENT®LA KEYWAY
Illustration List Number Number of Pins
2802
Schlage®6-pin C Keyway
O-Bitted or Keyed Random
3802
Sargent®6-pin LA Keyway
O-Bitted or Keyed Random
*Schlage®and Corbin Russwin options not available with MO levers.
**Medeco®, ASSA®option available only with AU lever.
ELECTRIFIED
Page 1 0
5400LN Series Cylindrical Lock
Features
•Patented Free Wheeling lever mechanism.
•Self-contained, continuous-duty integral
solenoid (allows installation in standard
cylindrical prep).
•Available Fail Safe or Fail Secure.
•Available in 12 or 24 volts AC/DC.
• External rectifier for AC operation.
•Mechanical cylinder override.
•All 5400LN cylinder options.
•ANSI Grade 1.
•UL listed.
ELECTRIFIED 5400LN CYLINDRICAL LOCKSET
Outside Inside Function Function Description
5490LN
Fail Safe
•Power on/locks outside lever.
•Inside lever always free.
• Latchbolt retracted by key when locked
electrically.
•Free Wheeling lever when locked
electrically.
5491LN
Fail Secure
•Power on/unlocks outside lever.
•Inside lever always free.
• Latchbolt retracted by key when power
is off.
•Free Wheeling lever when power is off
(locked).
OPERATION
Electric locks provide the ability to electrically lock or unlock the outside trim from a remote location. Fail
Safe locks are commonly used in stair towers to release upon fire alarm activation. Fail Secure locks are used
on perimeter doors or security doors to allow ingress using access control technologies (proximity cards,
keypads, etc.)
LATCHBOLTS
Page 1 1
5400LN Series Cylindrical Lock
List No. Front Backset Throw Front Width Latch Diameter
F693 Flat 2-3/4" 1/2" 1-1/8" (29mm) 1" (25mm)
693 Beveled 2-3/4" 1/2" 1-1/8" (29mm) 1" (25mm)
3693 Beveled 3-3/4" 1/2" 1-1/8" (29mm) 1" (25mm)
List No. Front Backset Throw Front Width Latch Diameter
F694 Flat 2-3/4" 1/2" 1-1/8" (29mm) 1" (25mm)
F480B Flat 2-3/4" 3/4" 1-1/8" (29mm) 1" (25mm)
694 Beveled 2-3/4" 1/2" 1-1/8" (29mm) 1" (25mm)
480B Beveled 2-3/4" 3/4" 1-1/8" (29mm) 1" (25mm)
3694 Beveled 3-3/4" 1/2" 1-1/8" (29mm) 1" (25mm)
3480B Beveled 3-3/4" 3/4" 1-1/8" (29mm) 1" (25mm)
PLAIN LATCHBOLTS
DEADLOCKING LATCHBOLTS
Note: For 3/4" throw applications, only deadlocking latchbolts available.
STRIKES
Page 1 2
5400LN Series Cylindrical Lock
STRIKES
Yale
®
5400LN locksets are supplied standard with a 497 ANSI strike.
A variety of optional strikes are also available. All strikes are located on the same vertical and horizontal
center lines as the latchbolt. Some strikes are available in a variety of lip lengths to accommodate varying
thickness of doors and frames. To determine the proper length of the lip, measure from the center line of the
strike to the edge of the jamb and add 1/4" (6mm). All strikes are reversible.
ATTACHING SCREWS
List No. 497 ANSI Strike
1-1/4" supplied standard with
5400LN. 1-1/8", 1-1/2", and
1-3/4" lip lengths available by
special order.For door and
frames with ANSI A115.2
preparations.
List No. 495 Strike
1-1/4" curved lip, wrought box
supplied. 1", 1-1/2", 1-3/4" and
2" curved lip lengths available
by special order.
List No. 497B Blank ANSI Strike
Available to special order.
Installed in frame with standard
ANSI A115.2 preparation to
replace the strike when the
lockset has been removed from
the door.
List No. 202 Strike Box
Available to special order.
Specify 497 x 202.
For List No. 495
#8-8-32 x 3/4" (19mm) Phillips flat head
combination wood and machine screws.
P/N 81-2012-0416
For List Nos. 497 and 497B
#12-12-24 x 1" Phillips flat head
combination wood and machine screws.
P/N 81-2012-0620
NOTE:When ordering strike or attaching screws individually, specify the finish required; i.e . 497 x 202 x 606.
SUGGESTED SPECIFICATION
Page 1 3
5400LN Series Cylindrical Lock
GRADE 1 LEVER CYLINDRICAL LOCKSET
Lockset chassis shall be constructed of heavy-gauge cold-rolled steel, zinc dichromate plated to protect against
rust and corrosion. Locksets shall be adjustable to fit doors between 1-3/4" (44mm) to 2-1/4" (57mm) thick.
Locksets shall be non-handed, and shall install easily without the need for specialized installation tools.
Locksets shall have separate anti-rotation throughbolts in the 6 o’clock and 12 o’clock position outside the
2-1/8" face bore, and shall have no exposed mounting screws.
Locksets shall have solid one-piece, cast levers without plastic inserts, and shall be a minimum of 5-1/4" in
length. Levers shall operate independently, and shall have inside and outside lever return springs. Outside
levers on the keyed locksets shall be removable only when the designated key is in the cylinder.
Locksets shall have the capability of accepting 7-pin standard, interchangeable core and high security
cylinders to provide expansion capacity for large master keyed systems.
Vandal resistant levers shall be offered as a standard feature in all locking functions, and shall be Free
Wheeling in the locked condition. Locksets that are rigid in the locked condition, or which must require
resetting (breakaway) are not acceptable.
The latchbolt shall be made of stainless steel.
All locksets shall carry a comprehensive five-year mechanical warranty. Locksets shall carry a lifetime
warranty against lever sag or lever spring breakage.
All locksets shall comply with the following certifications:
- UL 3 Hour Fire Rating
- ANSI A156.2 Series 4000, Grade 1
- ANSI A117.1 Accessibility Code
- ANSI A115.18 Preparation
All locksets shall be 5400LN Series Grade 1 Key-in-Lever cylindrical locksets as assembled by Yale
Commercial Locks and Hardware.
ORDERING INFORMATION
Page 1 4
5400LN Series Cylindrical Lock
From this outline select the List Number for the Yale®5400LN Series Cylindrical Lockset you require.
Design Function Latch Strike Cylinder
Door
Thickness
Finish
See Page 4 See Pages 5-7 See Page 11 See Page 12 See Pages 8-9 See Page 3 See Page 2
Quantity Design Function Latch Strike Cylinder
Door
Thickness
Finish
100 AU 5407LN F694 497 1802 1-3/4" 626
ORDERING EXAMPLE
PACKING
Each box has a strike, paper template, combination wood and machine screws, lever release tool and easy-tofollow instructions. Cylinder functions supplied with two keys. Ten shelf boxes to a case.
For the latest information on Yale
Commercial Lock and Hardware products,
visit our website at www.yalelocks.com.
Click on the “Literature” button to find:
■ Catalogs
■ Parts manuals
■ Tem pl ates
■ Specifications
■ Installation instructions
Yale®customers can click on the ebusiness
symbol on the website to register for an
ebusiness account to:
■ Check the status of orders
■ Check availability of Warehouse and
Quick-Ship items
■ Track your order and confirm delivery
■ Receive email notification of template
changes
And More...
42129-MA-5.0-7/03R
Ya le Commercial Locks and Hardware
Address: 1902 Airport Road, Monroe, NC 28110 USA
Tel: 1-800-438-1951
•
Fax: 1-800-338-0965
•
www.yalelocks.com
Yale-Corbin Canada Ltd.
Address: 6940 Edwards Boulevard, Mississauga, Ontario, Canada L5T 2W2
Tel: 1-800-461-3007
•
Fax: 1-800-461-8989
•
www.yalecorbin.on.ca
Yal e®and Yale Security Inc.® are registered trademarks of Yale Security Inc. Other product brand names may be trademarks or registered trademarks of their respective owners and are
mentioned for reference purposes only. Copyright© 2001, 2003 Yale Security Inc. All rights reserved. These materials are protected under US copyright laws. All contents current at time
of publication. Yale Security Inc. reserves the right to change availability of any item in this bulletin, its design, construction, and/or its materials.
The ASSA ABLOY Group is the world’s leading manufacturer and supplier of locking solutions, dedicated to satisfying end-user needs for
security, safety and convenience.
online literature
and templates
www.yalelocks.com
Loading...