ASRock VisionX Owner's Manual

VisionX Series
User Manual
Version 1.0
Published July 2012
Copyright©2012 ASRock INC. All rights reserved.
1
Copyright Notice:
No part of this manual may be reproduced, transcribed, transmitted, or translated in
the purchaser for backup purpose, without written consent of ASRock Inc.
Products and corporate names appearing in this manual may or may not be regis-
tered trademarks or copyrights of their respective companies, and are used only for
identication or explanation and to the owners’ benet, without intent to infringe.
Disclaimer:
Specications and information contained in this manual are furnished for informa-
tional use only and subject to change without notice, and should not be constructed
as a commitment by ASRock. ASRock assumes no responsibility for any errors or
omissions that may appear in this manual.
With respect to the contents of this manual, ASRock does not provide warranty of
any kind, either expressed or implied, including but not limited to the implied warran-
ties or conditions of merchantability or tness for a particular purpose.
In no event shall ASRock, its directors, ofcers, employees, or agents be liable for
any indirect, special, incidental, or consequential damages (including damages for
loss of prots, loss of business, loss of data, interruption of business and the like),
even if ASRock has been advised of the possibility of such damages arising from
any defect or error in the manual or product.
This device complies with Part 15 of the FCC Rules. Operation is subject to the fol-
lowing two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
CALIFORNIA, USA ONLY
The Lithium battery adopted on this product contains Perchlorate, a toxic
substance controlled in Perchlorate Best Management Practices (BMP) regulations
passed by the California Legislature. When you discard the Lithium battery in Cali-
fornia, USA, please follow the related regulations in advance.
“Perchlorate Material-special handling may apply, see
www.dtsc.ca.gov/hazardouswaste/perchlorate”
ASRock Website: http://www.asrock.com
2
Safety instructions
Your system is designed and tested to meet the latest standards of safety for infor-
mation technology equipment. However, to ensure your safety, it is important that
you read the fol lowing safety instructions.
Setting up your system
Read and follow all instructions in the documentation before you operate your
system.
Do not use this product near water or a heated source such as a radiator.
Set up the system on a stable surface.
• Openings on the chassis are for ventilation. Do not block or cover these
openings. Make sure you leave plenty of space around the system for
ventilation. Never insert objects of any kind into the ventilation openings.
Use this product in environments with ambient temperatures between 0o C
and 40o C.
• If you use an extension cord, make sure that the total ampere rating of the
devices plugged into the extension cord does not exceed its ampere rating.
Care during use
• Do not walk on the power cord or allow anything to rest on it.
• Do not spill water or any other liquids on your system.
• When the system is turned OFF, a small amount of electrical current still ows.
Always unplug all power, modem, and network cables from the power outlets
before cleaning the system.
• If you encounter the following technical problems with the product, unplug the
power cord and contact a qualied service technician or your retailer.
The power cord or plug is damaged.
Liquid has been spilled into the system.
The system does not function properly even if you follow the operating
instructions.
The system was dropped or the cabinet is damaged.
The system performance changes.
No disassembly
NOTE:
The warranty does not apply to products (including HDD, ODD, memory
and warranty seal) that have been damaged as a result of attempting to
disassemble/reassemble the system or modifying the hardware
conguration.
3
Safety cautions and warnings
Optical Drive Safety Information
Optical drives sold with this system contains a CLASS 1 LASER PRODUCT.
CAUTION:
Invisible laser radiation when open. Do not stare into beam or view
directly with optical instruments.
WARNING:
Making adjustments or performing procedures other than those specied
in the user’s manual may result in hazardous laser exposure. Do not
attempt to disassemble the optical drive. For your safety, have the optical
drive serviced only by an authorized service provider.
Product disposal notice
IMPORTANT:
This symbol of the crossed out wheeled bin indicates that the product
(elec trical and electronic equipment) should not be placed in municipal
waste. Check local regu lations for disposal of electronic products.
Nordic Lithium Cautions (for lithium-ion batteries)
CAUTION!
Danger of explosion if battery is incorrectly replaced. Replace only with
the same or equivalent type recommended by the manufacturer. Dispose
of used batteries ac cording to the manufacturer’s instructions.
Installation Notices
4
Do not place this
product underneath
heavy loads or in an
unstable position.
Do not expose this
product to high levels
of direct sunlight,
high-humidity or wet
conditions.
Do not use or expose this
product around magnetic
elds as magnetic
interference may affect
the performance of the
product.
Do not block the air
vents to this product or
impede the airow in any
way.
Contents
1 Introduction ......................................................... 7
1.1 Package Contents ......................................................... 7
1.2 Specications ................................................................. 8
1.3 System Motherboard Components ................................ 10
1.4 Rear Panel ..................................................................... 12
1.5 System Chassis ............................................................. 13
1.6 Remote Controller .......................................................... 14
2 Opening the Chassis ........................................... 15
3 Reinstalling the ODD/HDD ................................... 16
4 Installing the second HDD ................................... 17
5 Reinstalling the DIMMs ........................................ 18
6 Reinstalling the CPU ............................................ 19
7 Reinstalling the MXM Card .................................. 20
8 Dual Monitor ....................................................... 21
9 Driver Installation ................................................. 22
10 Utility Menu ........................................................ 23
10.1 Instant Boot .................................................................. 23
10.1.1 Introduction ........................................................ 23
10.1.2 Installation .......................................................... 24
10.2 ASRock Extreme Tuning Utility (AXTU) ....................... 27
10.2.1 Introduction ........................................................ 27
10.2.2 Installation .......................................................... 27
10.2.3 Function ............................................................. 27
10.3 Symantec Norton AntiVirus Software free bundle
(Trial version) ............................................................... 31
10.4 THX TruStudio Software free bundle ........................... 32
10.5 ASRock APP Charger .................................................. 33
10.6 CyberLink MediaEspresso 6.5 (Trial version) .............. 34
10.7 ASRock XFast USB Technology .................................. 35
10.8 ASRock XFast LAN ...................................................... 38
5
11 UEFI SETUP UTILITY ............................................... 39
11.1 Introduction .................................................................. 39
11.1.1 UEFI Menu Bar ................................................... 39
11.1.2 Navigation Keys ................................................. 40
11.2 Main Screen ................................................................. 40
11.3 OC Tweaker Screen ..................................................... 41
11.4 Advanced Screen ......................................................... 44
11.4.1 CPU Conguration ............................................. 45
11.4.2 North Bridge Conguration ................................. 47
11.4.3 South Bridge Conguration ................................ 48
11.4.4 Storage Conguration ........................................ 49
11.4.5 Intel(R) Rapid Start Technology ......................... 50
11.4.6 Intel(R) Smart Connect Technology ................... 51
11.4.7 Super IO Conguration ....................................... 52
11.4.8 ACPI Conguration ............................................. 53
11.4.9 USB Conguration .............................................. 54
11.4.10 Network Conguration ....................................... 55
11.5 Hardware Health Event Monitoring Screen .................. 56
11.6 Boot Screen ................................................................. 57
11.7 Security Screen ............................................................ 58
11.8 Exit Screen ................................................................... 59
12 Software Support ............................................... 60
12.1 Install Operating System ................................................ 60
12.2 Support CD Information ................................................. 60
12.2.1 Running Support CD .......................................... 60
12.2.2 Drivers Menu ...................................................... 60
12.2.3 Utilities Menu...................................................... 60
12.2.4 Contact Information ............................................ 60
6
Chapter 1 Introduction
Thank you for purchasing ASRock VisionX Series, a reliable product produced un-
der ASRock’s consistently stringent quality control. It delivers excellent performance
with robust design conforming to ASRock’s commitment to quality and endurance.
In this manual, chapter 1 and 2 contain introduction of the hardware and step-by-
step guide to the hardware installation. Chapter 3 and 4 contain the conguration
guide to BIOS setup and information of the Support CD.
Because the hardware specications and the BIOS software might be
updated, the content of this manual will be subject to change without no-
tice. In case any modications of this manual occur, the updated version
will be available on ASRock website without further notice. You may nd
the latest VGA cards and CPU support lists on ASRock website as well.
ASRock website http://www.asrock.com
If you require technical support related to this product, please visit our
website for specic information about the model you are using.
www.asrock.com/support/index.asp
1.1 Package Contents
ASRock VisionX Series ASRock Support CD ASRock Quick Start Guide
One AC Power Cord One AC/DC Adapter One DVI to D-Sub Adapter
Remote Controller SATA and Power Cables
7
1.2 Specifications
* For barebone systems, CPU, memory, HDDs and ODDs may not be included.
Processor Intel® Mobile Ivy Bridge Processor.
Supports 3rd Generation Intel® Corei7/i5/i3 Dual-Core
Mobile Ivy Bridge Processor Family
Chipset Mobile Intel® HM77 chipset
Memory Supports DDR3 1600/1333/1066MHz, 2xSO-DIMM slots,
maximum up to 16GB
Display
Supports Blu-ray 3D playback, AMD HD3D technology
HDD*1 Supports 2.5” SATA HDD (Up to two HDD’s)
mSATA SSD Supports mSATA SSD
ODD BD Combo or DVD Super Multi
Front I/O 2x USB 3.0, 1x MIC, 1x Headphone, 4-in-1 Card reader
(MMC/SD3.0/MS/MS PRO)
Rear I/O 1x HDMI, 1x DVI-I (Dual-Link), 4x USB 2.0, 1x S/PDIF,
1x eSATA2*2, 2x USB3.0
Audio 7.1 Ch HD Audio with THX TruStudio
LAN Gigabit LAN
WiFi 2T2R 802.11 a/b/g/n wireless LAN (300Mbps, 5GHz/2.4GHz
Dual-Band access)
Bluetooth Bluetooth 4.0/3.0 HS class II
Remote Controller
Power 120W/19V Adapter
Dimension 200mm(W)x70mm(H)x200m(L)
Volume (liters) 2.8L
AMD Radeon™ HD7850M Graphics (with 1GB GDDR5 VRAM)
TM
Support MCE function
Free bundle software:
*3
1. CyberLink PowerDVD 10 OEM version. (Blu-ray 3D movie playback, 2D-to-3D
video le playback, Enhanced TrueTheater 3D to convert 2D-to-3D for DVDs and
video les etc.)
2. Symantec Norton AntiVirus Software (trial version)
3. CyberLink MediaEspresso 6.5 (trial version)
4. ASRock MAGIX Multimedia Suite (OEM version)
5. ASRock XFast LAN, XFast RAM, XFast USB
8
*1
To setup RAID under Windows® VistaTM / VistaTM 64-bit, the RAID driver in the
support CD is required.
*2
Hot Plug is supported in AHCI mode only for eSATA. IDE mode does not support Hot Plug.
*3
CyberLink PowerDVD 10 OEM software is bundled with VisionX BD series only.
WARNING
Please realize that there is a certain risk involved with overclocking, including
adjusting the setting in the BIOS, or using the third-party overclocking tools.
Overclocking may affect your system stability, or even cause damage to the
components and devices of your system. It should be done at your own risk and
expense. We are not responsible for possible damage caused by overclocking.
9
1.3 System Motherboard Components
1. SATA 3.0 connector: For HDD SATA data cables
2. SATA 3.0 connector: For HDD SATA data cables
3. ATX5V output power connector for slim ODD & 2.5” HDD
4. SATA connector: For ODD SATA data cables
5. SATA power cable connector (+5V/+12V) for second HDD
6. Fan connector
7. HM77 PCH chipset
8. Memory socket
9. Infrared module header
10. mSATA slot
11. CPU
12. Fan connector
13. Clear CMOS jumper
14. Mini-PCI Express expansion slot: For WiFi module
15. MXM 3.0 slot
10
NOTE.
1. SATA and Power Connections
2. Fan Connection
11
1.4 Rear Panel
16. HDMI connector
17. eSATA2 connector
18. DVI-I port (Dual-Link)
19. USB3.0 ports: USB devices
20. Mic In (Pink): Microphone
21. Optical S/PDIF Out port
22. DC-In jack
23. Side port for side speakers
24. Center/LFE (Orange): Center / subwoofer speakers
25. Front L/R Out (Lime): Stereo speakers or headphones
26. Line In (Blue) for 2/4/6 channel; Rear (Blue) for 8 channel
27. LAN (RJ-45) port: Local Area Network
28. USB2.0 ports: USB devices
12
1.5 System Chassis
29. Headphone
30. Microphone
31. USB3.0 ports: USB devices
32. 4-in-1 Card reader (MMC/SD3.0/MS/MS Pro)
33. Power ON/OFF button with status indicator
34. Slot-in Optical Disc Drive
13
1.6 Remote Controller
Some remote controller functions listed above are only available with the
relative hardware equipments. If the hardware equipments you adopt are not
compatible with the system, you are not allowed to use these functions. This
product is designed to meet MCE standards.
14
Chapter 2 Opening the chassis
1. Press the button on the rear I/O to open the top side of the chassis.
2. After the chassis is opened, you will see the top shield inside the chassis.
3. Unscrew the screws on the corners of the top shield.
4. Carefully remove the top shield.
15
Chapter 3 Reinstalling the ODD/HDD
1. After you remove the top shield, you will see the ODD/HDD bracket.
2. Disconnect the ODD/HDD SATA power cable, and take out the ODD/HDD
bracket.
3. Unscrew the screws from the side of the ODD / HDD rack, and change your
required ODD / HDD.
16
Chapter 4 Installing the second HDD
1. Please follow steps 1 and 2 from page 16 to take out the ODD/HDD bracket.
Install the second HDD and fasten the screws to the rack, then replace the
bracket into the chassis.
2. Connect the SATA and power cables.
3. Replace the side cover and fasten the screws.
17
Chapter 5 Reinstalling the DIMMs
1. Unlock the DIMM slot by pressing the retaining clips outward to change the
DIMM.
18
Loading...
+ 42 hidden pages