Asrock QC5000-ITX/PH User Manual

QC5000-ITX/PHQC5000-ITX/PH

QC5000-ITX/PHQC5000-ITX/PH

Version 1.0

Published October 2014

Copyright©2014 ASRock INC. All rights reserved.

Copyright Notice:

No part of this documentation may be reproduced, transcribed, transmitted, or
translated in any language, in any form or by any means, except duplication of
documentation by the purchaser for backup purpose, without written consent of
ASRock Inc.

Products and corporate names appearing in this documentation may or may not
be registered trademarks or copyrights of their respective companies, and are used
only for identication or explanation and to the owners’ benet, without intent to

infringe.

Disclaimer:

Specications and information contained in this documentation are furnished for
informational use only and subject to change without notice, and should not be
constructed as a commitment by ASRock. ASRock assumes no responsibility for
any errors or omissions that may appear in this documentation.

With respect to the contents of this documentation, ASRock does not provide
warranty of any kind, either expressed or implied, including but not limited to
the implied warranties or conditions of merchantability or tness for a particular
purpose.

In no event shall ASRock, its directors, ocers, employees, or agents be liable for
any indirect, special, incidental, or consequential damages (including damages for
loss of prots, loss of business, loss of data, interruption of business and the like),
even if ASRock has been advised of the possibility of such damages arising from any
defect or error in the documentation or product.

e terms HDMI™ and HDMI High-Denition Multimedia Interface, and the HDMI
logo are trademarks or registered trademarks of HDMI Licensing LLC in the United
States and other countries.

is device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that

may cause undesired operation.

CALIFORNIA, USA ONLY

e Lithium battery adopted on this motherboard contains Perchlorate, a toxic substance
controlled in Perchlorate Best Management Practices (BMP) regulations passed by the
California Legislature. When you discard the Lithium battery in California, USA, please
follow the related regulations in advance.
“Perchlorate Material-special handling may apply, see
www.dtsc.ca.gov/hazardouswaste/perchlorate”

ASRock Website: http://www.asrock.com

AUSTRALIA ONLY

Our goods come with guarantees that cannot be excluded under the Australian Consumer
Law. You are entitled to a replacement or refund for a major failure and compensation for
any other reasonably foreseeable loss or damage caused by our goods. You are also entitled
to have the goods repaired or replaced if the goods fail to be of acceptable quality and the
failure does not amount to a major failure. If you require assistance please call ASRock Tel
: [phone] ext.123 (Standard International call charges apply)

e terms HDMI™ and HDMI High-Denition Multimedia Interface, and the HDMI
logo are trademarks or registered trademarks of HDMI Licensing LLC in the United
States and other countries.

Contents

Chapter 1 Introduction 1

1.1 Package Contents 1

1.2 Specications 2

1.3 Motherboard Layout 6

1.4 I/O Panel 8

Chapter 2 Installation 10

2.1 Installing Memory Modules (DIMM) 11

2.2 Expansion Slots (PCI Express Slots) 13

2.3 Jumpers Setup 14

2.4 Onboard Headers and Connectors 15

Chapter 3 Software and Utilities Operation 19

3.1 Installing Drivers 19

3.2 A-Tuning 20

3.3 ASRock APP Shop 23

3.3.1 UI Overview 23

3.3.2 Apps 24

3.3.3 BIOS & Drivers 27

3.3.4 Setting 28

3.4 Start8 29

Chapter 4 UEFI SETUP UTILITY 32

4.1 Introduction 32

4.1.1 UEFI Menu Bar 32

4.1.2 Navigation Keys 33

4.2 Main Screen 34

4.3 OC Tweaker Screen 35

4.4 Advanced Screen 38

4.4.1 CPU Conguration 39

4.4.2 Chipset Conguration 40

4.4.3 Storage Conguration 42

4.4.4 Super IO Conguration 43

4.4.5 ACPI Conguration 44

4.4.6 USB Conguration 46

4.4.7 Trusted Computing 47

4.5 Tools 48

4.6 Hardware Health Event Monitoring Screen 51

4.7 Boot Screen 52

4.8 Security Screen 55

4.9 Exit Screen 56

QC5000-ITX/PH

Chapter 1 Introduction

ank you for purchasing ASRock QC5000-ITX/PH motherboard, a reliable

motherboard produced under ASRock’s consistently stringent quality control.

It delivers excellent performance with robust design conforming to ASRock’s

commitment to quality and endurance.

In this manual, Chapter 1 and 2 contains the introduction of the motherboard

and step-by-step installation guides. Chapter 3 contains the operation guide of the

soware and utilities. Chapter 4 contains the conguration guide of the BIOS setup.

Becau se the motherboard specications and th e BIOS sowa re might be updated, the
content of this manual will be subject to change without notice. In ca se any modica­tions of this manual occur, the updated version will be available on ASRock’s website
without furth er notice. If you require technical s uppor t related to this motherboard,
please visit our website for spe cic information about the model you are using. You
may nd the l atest VGA cards and CPU suppor t list on ASRock’s website a s well.
ASRock website http://www.asrock.com.

1.1 Package Contents

ASRock QC5000-ITX/PH Motherboard (Mini-ITX Form Factor)

•

ASRock QC5000-ITX/PH Quick Installation Guide

•

ASRock QC5000-ITX/PH Support CD

•

2 x Serial ATA (SATA) Data Cables (Optional)

•

1 x I/O Panel Shield

•

1 x WiFi Module Screw

•

English

1

English

1.2 Specications

Platform

CPU

Memory

Expansion
Slot

Graphics

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

Mini-ITX Form Factor

All Solid Capacitor design

High Density Glass Fabric PCB

AMD FT3 Kabini A4-5000 Quad-Core APU

2 x DDR3 DIMM Slots

Supports DDR3 1600/1333/1066 non-ECC, un-buered

memory

Max. capacity of system memory: 16GB (see CAUTION1)

1 x PCI Express 2.0 x16 Slot (PCIE1 @ x4 mode)

1 x Mini-PCI Express Slot: For WiFi Module

Integrated AMD RadeonTM HD 8330 Graphics

DirectX 11.1, Pixel Shader 5.0

Max. shared memor y 2GB

Four graphics output options: D-Sub, DVI-D, HDMI and

DisplayPort 1.2 (see CAUTION2)

Supports HDMI with max. resolution up to 4K × 2K

(4096x2160) @ 24Hz or 4K × 2K (3840x2160) @ 30Hz

Supports DVI-D with ma x. resolution up to 1920x1200 @

60Hz

Supports D-Sub with max. resolution up to 2048x1536 @

60Hz

Supports DisplayPort 1.2 with max. resolution up to 4K × 2K

(4096x2160) @ 30Hz

Supports Auto Lip Sync, Deep Color (12bpc), xvYCC and

HBR (High Bit Rate Audio) with HDMI Port (Compliant

HDMI monitor is required)

Supports HDCP with DVI-D, HDMI and DisplayPort 1.2

Ports

Supports Full HD 1080p Blu-ray (BD) playback with DVI-D,

HDMI and DisplayPort 1.2 Ports

2

Audio

LAN

Rear Panel
I/O

7.1 CH HD Audio with Content Protection (Realtek ALC892

•

Audio Codec)

Premium Blu-ray Audio support

•

Supports Surge Protection (ASRock Full Spike Protection)

•

PCIE x1 Gigabit LAN 10/100/1000 Mb/s

•

Realtek RTL8111E

•

Supports Wake-On-LAN

•

Supports Lightning/ESD Protection (ASRock Full Spike

•

Protection)

Supports LAN Cable Detection

•

Supports Energy Ecient Ethernet 802.3az

•

Supports PXE

•

1 x PS/2 Mouse/Keyboard Port

•

1 x D-Sub Port

•

1 x DVI-D Port

•

1 x HDMI Port

•

1 x DisplayPort 1.2

•

1 x Optica l SPDIF Out Port

•

2 x USB 2.0 Ports (Supports ESD Protection (ASRock Full

•

Spike Protection))

2 x USB 3.0 Ports (AMD FT3 Kabini A4-5000 Quad-Core

•

APU) (Supports ESD Protection (ASRock Full Spike Protec-

tion))

2 x USB 3.0 Ports (Etron EJ188H) (Supports ESD Protection

•

(ASRock Full Spike Protection))

1 x RJ-45 LAN Port with LED (ACT/LINK LED and SPEED

•

LED)

HD Audio Jacks: Rear Speaker / Central / Bass / Line in /

•

Front Speaker / Microphone

QC5000-ITX/PH

Storage

2 x SATA3 6.0 Gb/s Connectors by AMD FT3 Kabini A4-

•

5000 Quad-Core APU, support NCQ, AHCI and Hot Plug

2 x SATA3 6.0 Gb/s Connectors by ASMedia ASM1061, sup-

•

port NCQ, AHCI and Hot Plug

English

3

Connector

BIOS
Feature

Hardware
Monitor

1 x COM Port Header

•

1 x TPM Header

•

1 x CPU Fan Connector (3-pin)

•

2 x Chassis Fan Connectors (1 x 4-pin, 1 x 3-pin)

•

1 x 24 pin ATX Power Connector

•

1 x Front Panel Audio Connector

•

2 x USB 2.0 Headers (Support 4 USB 2.0 ports) (Supports ESD

•

Protection (ASRock Full Spike Protection))

1 x USB 3.0 Header by Etron EJ188H (Supports 2 USB

•

3.0 ports) (Supports ESD Protection (ASRock Full Spike

Protection))

32Mb AMI UEFI Legal BIOS with multilingual GUI support

•

Supports “Plug and Play”

•

ACPI 1.1 compliance wake up events

•

SMBIOS 2.3.1 support

•

DRAM Voltage multi-adjustment

•

CPU/Chassis temperature sensing

•

CPU/Chassis Fan Tachometer

•

CPU/Chassis Quiet Fan

•

CPU/Chassis Fan multi-speed control

•

Voltage monitoring: +12V, +5V, +3.3V, Vcore

•

English

4

Microso® Windows® 8.1 32-bit / 8.1 64-bit / 8 32-bit / 8 64-

OS

Certica­tions

* For detailed product information, ple ase vi sit our website: http://ww w.asrock.com

•

bit / 7 32-bit / 7 64-bit / XP 32-bit / XP 64-bit

* USB 3.0 is not supported by Windows® XP

FCC, CE, WHQL

•

ErP/EuP ready (ErP/EuP ready power supply is required)

•

Please realize that the re is a certain r isk involved with o verclocking, including adjust­ing the setting in the BIOS, applying Untied Ove rclocking Technology, or using third­party o verclocking tools. Overclocking may aect your system’s stabilit y, or even cause
damage to the components and devices of your system. It should be done at your ow n
risk and expense. We are not responsible for possible damage cau sed by overclocking.

1. Due to the operating system limitation, the actual memory size may be less than 4GB
for the reservation for system usage under Windows® 8.1 / 8 / 7 / XP. For Windows® 64­bit OS with 64-bit CPU, there is no such limitation. You can use ASRock XFast RAM
to utilize the memory that Windows® cannot use.

2. HDMI and DisplayPort 1.2 cannot output at the same time. You can only choose
either one of them . Please refer to the BIOS setup option “HDMI/DP Sw itch“ on
page 41.

QC5000-ITX/PH

English

5

ATXPW R1

FS B 800

DDR3_A1 (6 4 b it , 2 40 -p in module)

DDR3_A2 (6 4 b it , 2 40 -p in module)

SATA3_1

LAN

AUDIO
CODEC

1

CLRCMO S1

PCIE1

1

USB4_ 5

1

USB2_ 3

HD_AU DIO1

1

CHA_FA N1

SPEAKE R1

1

HDLED RE SET

PLED PWRBTN

1

PANEL 1

RJ-45 L AN

USB 3.0
T: U SB 4
B: U SB5

SATA3_2

Fr on t U SB 3.0

CPU_FAN 1

TPMS1

1

1

COM1

USB 2.0
T: USB 0
B: U SB1

PS2

Keyb oar d /

Mous e

USB3_ 2_3

SATA3_A 0

SATA3_A 1

MPCIE 1

DP_1

HDMI

VGA1

DVI1

Top:

CTR B ASS

Cent er:

REAR SPK

Bott om:

Opti cal

SPDI F

Top:

LINE IN

Cent er:

FRON T

Bott om:

MIC I N

CHA_FAN 2

USB 3.0
T: USB 2
B: U SB3

CMOS

Battery

QC 500 0-I TX /PH

1.3 Motherboard Layout

English

6

32M b
BIO S

Ro HS

No. Description

1 USB 3.0 Header (USB3_2_3)

2 2 x 240-pin DDR3 DIMM Slots (DDR3_A1, DDR3_A2)

3 Clear CMOS Jumper (CLRCMOS1)

4 Chassis Fan Connector (CHA_FAN1)

5 ATX Power Connector (ATXPWR1)

6 Chassis Fan Connector (CHA_FAN2)

7 System Panel Header (PANEL1)

8 SATA3 Connector (SATA3_1)

9 SATA3 Connector (SATA3_2)

10 SATA3 Connector (SATA3_A1)

11 SATA3 Connector (SATA3_A0)

12 Chassis Speaker Header (SPEAKER1)

13 CPU Fan Connector (CPU_FAN1)

14 COM Port Header (COM1)

15 USB 2.0 Header (USB4_ 5)

16 USB 2.0 Header (USB2_3)

17 TPM Header (TPMS1)

18 Front Panel Audio Header (HD_AUDIO1)

QC5000-ITX/PH

English

7

1.4 I/O Panel

1 4

2 3

7

658

14

No. Description No. Description

1 USB 2.0 Ports (USB01) 9 Microphone (Pink)

2 D-Sub Port 10 Optical SPDIF Out Port

3 DisplayPort 1.2* 11 USB 3.0 Ports (USB3_4_5)

4 LAN RJ-45 Port** 12 HDMI Port*

5 Central / Bass (Orange) 13 DVI-D Port

6 Rear Speaker (Black) 14 USB 3.0 Ports (USB3_0_1)

7 Line In (Light Blue) 15 PS/2 Mouse/Keyboard Port

8 Front Speaker (Lime)***

1213

1115 910

English

8

QC5000-ITX/PH

* HDMI and DisplayPort 1.2 cannot output at the same time. You can only choose e ither one of them. Please refer
to the BIOS setup option “HDMI/DP Switch“ on page 41.

** ere are two LEDs on each LAN port. Please refer to th e table below for the LAN port LED indications.

ACT/LINK L ED

SPEED LE D

LAN Por t

Activity / Link LED Speed LED

Status Description Status Description

O No Link O 10Mbps connection
Blinking Data Activity Orange 100Mbps connection
On Link Green 1Gbps connection

*** If you use a 2-channel speaker, please connec t the speaker’s plug into “Front Speake r Jack”. See the tabl e below

for connection d etail s in accordance w ith the ty pe of speaker you use.

Audio Output

Channels

Front Speaker

(No. 8)

Rear Speaker

(No. 6)

Central / Bass

(No. 5)

Line In or

Side Speaker

(No. 7)

2 V -- -- --
4 V V -- --
6 V V V --
8 V V V V

To enable Multi-Streaming, you need to c onnect a front panel audio cable to the front
panel au dio header. Aer restarting your computer, you will nd the “Mixer” tool
on your system. Pl ease select “Mi xer ToolBox” , click “Enable playback multi­streaming”, and click “ok”. Choose “2CH”, “4CH”, “6CH”, or “8CH” and then you are
allowe d to select “Realtek HDA Pr imary output” to use the Rear Spe aker, Central/
Bass, and Front Speake r, or selec t “Realtek HDA Audio 2nd output” to use the front
panel au dio.

English

9

Chapter 2 Installation

is is a Mini-ITX form factor motherboard. Before you install the motherboard,

study the conguration of your chassis to ensure that the motherboard ts into it.

Pre-installation Precautions

Take note of the following precautions before you install motherboard components

or change any motherboard settings.

Make sure to unplug the power cord before installing or removing the motherboard.

•

Failure to do so may cause physical injuries to you and damages to motherboard

components.

In order to avoid damage from static electricity to the motherboard’s components,

•

NEVER place your motherboard directly on a carpet. Also remember to use a grounded

wrist strap or touch a safety grounded object before you handle the components.

Hold components by the edges and do not touch the ICs.

•

Whenever you uninstall any components, place them on a grounded anti-static pad or

•

in the bag that comes with the components.

When placing screws to secure the motherboard to the chassis, please do not over-

•

tighten the screws! Doing so may damage the motherboard.

English

10

2.1 Installing Memory Modules (DIMM)

is motherboard provides two 240-pin DDR3 (Double Data Rate 3) DIMM slots.

It is not allowed to install a DDR or DDR2 memory module into a DDR3 slot; other­wise, this motherboard and DIMM may be dam aged.

e DIMM only ts in one correc t orientation. It will cause pe rmanent damage to
the mothe rboard and the DIMM if you force the DIMM into the slot at incor rect
orientation .

QC5000-ITX/PH

11

English

1

2

English

12

3

2.2 Expansion Slots (PCI Express Slots)

ere are 2 PCI Express slots on the motherboard.

Before installing an ex pansion card, please make sure that the power supply is
switched o or the power cord is unplugged. Plea se read the docum entation of the
expan sion card and mak e necessary h ardware settings for the card before you start
the installation.

PCIe slots:

PCIE1 (PCIe 2.0 x16 slot) is used for PCI Express x4 lane width graphics cards.

MPCIE1 (mini-PCIe slot) is used for WiFi module.

QC5000-ITX/PH

13

English

2.3 Jumpers Setup

e illustration shows how jumpers are setup. When the jumper cap is placed on

the pins, the jumper is “Short”. If no jumper cap is placed on the pins, the jumper

is “Open”. e illustration shows a 3-pin jumper whose pin1 and pin2 are “Short”

when a jumper cap is placed on these 2 pins.

Clear CMOS Jumper

(CLRCMOS1)

(see p.6, No. 3)

CLRCMOS1 allows you to clear the data in CMOS. To clear and reset the system

parameters to default setup, please turn o the computer and unplug the power

cord from the power supply. Aer waiting for 15 seconds, use a jumper cap to

short pin2 and pin3 on CLRCMOS1 for 5 seconds. However, please do not clear

the CMOS right aer you update the BIOS. If you need to clear the CMOS when

you just nish updating the BIOS, you must boot up the system rst, and then shut

it down before you do the clear-CMOS action. Please be noted that the password,

date, time, and user default prole will be cleared only if the CMOS battery is

removed.

Clear CMOSDefault

English

14