Asrock B150M Pro4S User Manual

Version 1.0

Published June 2015

Copyright©2015 ASRock INC. All rights reserved.

Copyright Notice:

No part of this documentation may be reproduced, transcribed, transmitted, or
translated in any language, in any form or by any means, except duplication of
documentation by the purchaser for backup purpose, without written consent of
ASRock Inc.

Products and corporate names appearing in this documentation may or may not
be registered trademarks or copyrights of their respective companies, and are used
only for identication or explanation and to the owners’ benet, without intent to

infringe.

Disclaimer:

Specications and information contained in this documentation are furnished for
informational use only and subject to change without notice, and should not be
constructed as a commitment by ASRock. ASRock assumes no responsibility for
any errors or omissions that may appear in this documentation.

With respect to the contents of this documentation, ASRock does not provide
warranty of any kind, either expressed or implied, including but not limited to
the implied warranties or conditions of merchantability or tness for a particular
purpose.

In no event shall ASRock, its directors, ocers, employees, or agents be liable for
any indirect, special, incidental, or consequential damages (including damages for
loss of prots, loss of business, loss of data, interruption of business and the like),
even if ASRock has been advised of the possibility of such damages arising from any
defect or error in the documentation or product.

is device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that

may cause undesired operation.

CALIFORNIA, USA ONLY

e Lithium battery adopted on this motherboard contains Perchlorate, a toxic substance
controlled in Perchlorate Best Management Practices (BMP) regulations passed by the
California Legislature. When you discard the Lithium battery in California, USA, please
follow the related regulations in advance.
“Perchlorate Material-special handling may apply, see www.dtsc.ca.gov/hazardouswaste/
perchlorate”

ASRock Website: http://www.asrock.com

e terms HDMI™ and HDMI High-Denition Multimedia Interface, and the HDMI
logo are trademarks or registered trademarks of HDMI Licensing LLC in the United
States and other countries.

Contents

Chapter 1 Introduction 1

1.1 Package Contents 1

1.2 Specications 2

1.3 Motherboard Layout 6

1.4 I/O Panel 8

Chapter 2 Installation 10

2.1 Installing the CPU 11

2.2 Installing the CPU Fan and Heatsink 14

2.3 Installing Memory Modules (DIMM) 15

2.4 Expansion Slots (PCI Express Slots) 17

2.5 Jumpers Setup 18

2.6 Onboard Headers and Connectors 19

2.7 CrossFireX

TM

and Quad CrossFireXTM Operation Guide 23

2.7.1 Installing Two CrossFireX

TM

-Ready Graphics Cards 23

2.7.2 Driver Installation and Setup 25

Chapter 3 Software and Utilities Operation 26

3.1 Installing Drivers 26

3.2 ASRock Live Update & APP Shop 27

3.2.1 UI Overview 27

3.2.2 Apps 28

3.2.3 BIOS & Drivers 31

3.2.4 Setting 32

3.3 Enabling USB Ports for Windows® 7 Installation 33

Chapter 4 UEFI SETUP UTILITY 36

4.1 Introduction 36

4.1.1 UEFI Menu Bar 36

4.1.2 Navigation Keys 37

4.2 Main Screen 38

4.3 OC Tweaker Screen 39

4.4 Advanced Screen 47

4.4.1 CPU Conguration 48

4.4.2 Chipset Conguration 50

4.4.3 Storage Conguration 52

4.4.4 Super IO Conguration 53

4.4.5 ACPI Conguration 54

4.4.6 USB Conguration 56

4.4.7 Trusted Computing 57

4.5 Tools 58

4.6 Hardware Health Event Monitoring Screen 62

4.7 Security Screen 64

4.8 Boot Screen 65

4.9 Exit Screen 68

1

English

B150M Pro4S

Chapter 1 Introduction

ank you for purchasing ASRock B150M Pro4S motherboard, a reliable

motherboard produced under ASRock ’s consistently stringent qualit y control.

It delivers excellent performance with robust design conforming to ASRock’s

commitment to quality and endurance.

In this documentation, Chapter 1 and 2 contains the introduction of the

motherboard and step-by-step installation guides. Chapter 3 contains the operation

guide of the soware and utilities. Chapter 4 contains the conguration guide of

the BIOS setup.

1.1 Package Contents

•

ASRock B150M Pro4S Motherboard (Micro ATX Form Factor)

•

ASRock B150M Pro4S Quick Installation Guide

•

ASRock B150M Pro4S Support CD

•

2 x Serial ATA (SATA) Data Cables (Optional)

•

1 x I/O Panel Shield

Becau se the motherboard speci cations and the BIOS soware might be updated, the
content of this doc umentation will be subject to change without notice. In case any modi­cations of this documentation occ ur, the updated vers ion will be available on ASRock’s
website w ithout further notice . If you require technical suppor t related to this mother­board, please v isit our website for specic information about the model you are using. You
may nd the l atest VGA cards and CPU support list on ASRock’s website as well . ASRock
website http://www.asrock.com.

2

English

1.2 Specications

Platform

•

Micro ATX Form Factor

•

Solid Capacitor design

•

High Density Glass Fabric PCB

CPU

•

Supports 6

th

Generation Intel® CoreTM i7/i5/i3/Pentium®/

Celeron® Processors (Socket 1151)

•

Digi Power design

•

6 Power Phase design

•

Supports Intel® Turbo Boost 2.0 Technology

Chipset

•

Intel® B150

•

Supports Intel® Small Business Advantage 4.0

Memory

•

Dual Channel DDR4 Memory Technology

•

4 x DDR4 DIMM Slots

•

Supports DDR4 2133 non-ECC, un-buered memor y

•

Max. capacity of system memory: 64GB

•

Supports Intel® Extreme Memory Prole (XMP) 2.0

Expansion
Slot

•

2 x PCI Express 3.0 x16 Slots (PCIE1: x16 mode; PCIE4: x4

mode)

•

2 x PCI Express 3.0 x1 Slots (Flexible PCIe)

•

Supports AMD Quad CrossFireXTM and CrossFireXTM

Graphics

•

Intel® HD Graphics Built-in Visuals and the VGA outputs

can be supported only with processors which are GPU

integrated.

•

Supports Intel® HD Graphics Built-in Visuals : Intel® Quick

Sync Video with AVC, MVC (S3D) and MPEG-2 Full

HW Encode1, Intel® InTruTM 3D, Intel® Clear Video HD

Technology, Intel® InsiderTM, Intel® HD Graphics 510/530

•

Pixel Shader 5.0, DirectX 12

•

Max. shared memory 1792MB

•

Dual graphics output: Support DVI-D and HDMI ports by

independent display controllers

•

Supports HDMI with max. resolution up to 4K x 2K

(4096x2304) @ 24Hz

3

English

B150M Pro4S

•

Supports DVI-D with max. resolution up to 1920x1200 @

60Hz

•

Supports Auto Lip Sync, Deep Color (12bpc), xvYCC and

HBR (High Bit Rate Audio) with HDMI Port (Compliant

HDMI monitor is required)

•

Supports Accelerated Media Codecs: HEVC, VP8, VP9

•

Supports HDCP with DVI-D and HDMI Ports

•

Supports Full HD 1080p Blu-ray (BD) playback with DVI-D

and HDMI Ports

Audio

•

7.1 CH HD Audio with Content Protection (Realtek ALC892

Audio Codec)

* To congure 7.1 CH HD Audio, it is required to use an HD

front panel audio module and enable the multi-channel audio

feature through the audio driver.

•

Premium Blu-ray Audio support

•

Supports Surge Protection (ASRock Full Spike Protection)

•

ELNA Audio Caps

LAN

•

Gigabit LA N 10/100/10 00 Mb/s

•

Giga PHY Intel® I219V

•

Supports Wake-On-LAN

•

Supports Lightning/ESD Protection (ASRock Full Spike

Protection)

•

Supports Energy Ecient Ethernet 802.3az

•

Supports PXE

Rear Panel
I/O

•

1 x PS/2 Mouse/Keyboard Port

•

1 x DVI-D Port

•

1 x HDMI Port

•

4 x USB 3.0 Ports (Supports ESD Protection (ASRock Full

Spike Protection))

•

1 x RJ-45 LAN Port with LED (ACT/LINK LED and SPEED

LE D)

•

HD Audio Jacks: Line in / Front Speaker / Microphone

Storage

•

6 x SATA3 6.0 Gb/s Connectors, support NCQ, AHCI and

Hot Plug

4

English

Connector

•

1 x Print Port Header

•

1 x COM Port Header

•

1 x TPM Header

•

1 x Chassis Intrusion and Speaker Header

•

1 x CPU Fan Connector (4-pin) (Smart Fan Speed Control)

•

2 x Chassis Fan Connectors (4-pin) (Smart Fan Speed

Control)

•

1 x 24 pin ATX Power Connector

•

1 x 8 pin 12V Power Connector

•

1 x Front Panel Audio Connector

•

1 x USB 2.0 Header (Supports 2 USB 2.0 ports) (Supports

ESD Protection (ASRock Full Spike Protection))

•

1 x USB 3.0 Header (Supports 2 USB 3.0 ports) (Supports

ESD Protection (ASRock Full Spike Protection))

BIOS
Feature

•

128Mb AMI UEFI Legal BIOS with multilingual GUI sup-

port

•

ACPI 1.1 Compliant wake up events

•

SMBIOS 2.3.1 Support

•

DRAM Voltage Multi-adjustment

Hardware
Monitor

•

CPU/Chassis temperature sensing

•

CPU/Chassis Fan Tachometer

•

CPU/Chassis Quiet Fan (Auto adjust chassis fan speed by

CPU temperature)

•

CPU/Chassis Fan multi-speed control

•

CASE OPEN detection

•

Voltage monitoring: +12V, +5V, +3.3V, CPU Vcore, GT_CPU,

DRAM, VPPM, PCH 1.0V, VCCIO, VCCSA

OS

•

Microso® Windows® 10 64-bit / 8.1 64-bit / 7 32-bit / 7 64-

bit

* To install Windows® 7 OS, a modied installation disk with

xHCI drivers packed into the ISO le is required. Please refer to

pag 33

for more detailed instructions.

* For the updated Windows® 10 driver, please visit ASRock’s

website for details: http://www.asrock.com

5

English

B150M Pro4S

Certica­tions

•

FCC, CE, WHQL

•

ErP/EuP Ready (ErP/EuP ready power supply is required)

Please realize that there i s a certain risk involved with o verclocking, including adjusting
the setting in the BIOS , applying Untied Overclocking Technology, or using third-party
overclocking tools. Overclocking may aect your system’s stability, or even cau se damage to
the components and devices of your system. It should be done at your own r isk and expense.
We are not responsible for possible damage caused b y overclocking.

* For detailed product information, please v isit our website: http://www.asrock .com

6

English

Intel

B150

Sup er

I/O

ATXPWR 1

HDLED RESET

PLED PWRBTN

PANEL1

1

COM1

1

B150M Pro4S

RoHS

2

CPU_FAN1

5

1

Audio

CODEC

PCIE1

PCI Express 3.0

TPMS1

1

1

1

USB1_2

USB 3. 0

T: USB1

B: USB 2

PS2

Keyb oard

/Mous e

SPK_CI1

1

PCIE2

Fro nt USB 3. 0

14

15

16

17

18

19

20

21

CMOS

Battery

DDR 4_A2 (6 4 bit, 28 8-pin m odule )

DDR 4_A1 (6 4 bit, 28 8-pin m odule )

DDR 4_B2 (6 4 bit, 28 8-pin m odule )

DDR 4_B1 (6 4 bit, 28 8-pin m odule )

4

3

ATX12V1

11

7

8

SATA3_2

SATA3_3

SATA3_1

USB3_5 _6

12

13

SATA3_4

SATA3_5

128Mb

BIOS

6

SATA3_0

CHA_FAN2

9
10

CLRMOS1

1

1

HD_AUDIO1

PCIE3

PCIE4

Top:
RJ-45

USB 3.0
T: USB3
B: USB4

HDM I1

Top:

LINE I N

Cent er:

FRON T

Bott om:

MIC IN

CHA_FAN1

22

DVI1

1.3 Motherboard Layout

7

English

B150M Pro4S

No. Description

1 ATX 12V Power Connector (ATX12V1)

2 CPU Fan Connector (CPU_FAN1)

3 2 x 288-pin DDR4 DIMM Slots (DDR4_A1, DDR4_B1)

4 2 x 288-pin DDR4 DIMM Slots (DDR4_A2, DDR4_B2)

5 ATX Power Connector (ATXPWR1)

6 SATA3 Connector (SATA3_0)

7 SATA3 Connector (SATA3_1)

8 USB 3.0 Header (USB3_5_6)

9 Chassis Fan Connector (CHA_FAN2)

10 SATA3 Connector (SATA3_2)

11 SATA3 Connector (SATA3_3)

12 SATA3 Connector (SATA3_5)

13 SATA3 Connector (SATA3_4)

14 System Panel Header (PANEL1)

15 Chassis Intrusion and Speaker Header (SPK_CI1)

16 Clear CMOS Jumper (CLRMOS1)

17 USB 2.0 Header (USB1_2)

18 TPM Header (TPMS1)

19 Print Port Header (LPT1)

20 COM Port Header (COM1)

21 Front Panel Audio Header (HD_AUDIO1)

22 Chassis Fan Connector (CHA_FAN1)

8

English

1.4 I/O Panel

No. Description No. Description

1 PS/2 Mouse/Keyboard Port 6 USB 3.0 Ports (USB3_34)

2 LAN RJ-45 Port* 7 HDMI Port

3 Line In (Light Blue)** 8 DVI-D Por t

4 Front Speaker (Lime)** 9 USB 3.0 Ports (USB3_12)

5 Microphone (Pink)**

* ere are two LEDs on the LAN port. Please refer to the table below for the LAN port LED indications.

Activity / Link LED Speed LED

Status Description Status Description

O No Link O 10Mbps connection
Blinking Data Activity Orange 100Mbps connection
On Link Green 1Gbps connection

ACT/LINK LED

SPEED LED

LAN Por t

1

9 67 58

2 4

3

9

English

B150M Pro4S

** To congure 7.1 CH HD Audio, it i s required to use an HD front panel audio module and e nable the multi­channel audio feature through the audio driver.

Please set Speaker Cong uration to “ 7.1 Speaker” in the Realtek HD Audio Manager.

Function of the Audio Ports in 7.1-channel Conguration:

Port Function

Light Blue (Rear panel) Rear Speaker Out
Lime (Rear panel) Front Speaker Out
Pink (Rear panel) Central /Subwoofer Speaker Out
Lime (Front panel) Side Speaker Out

10

English

is is a Micro ATX form factor motherboard. Before you install the motherboard,

study the conguration of your chassis to ensure that the motherboard ts into it.

Pre-installation Precautions

Take note of the following precautions before you install motherboard components

or change any motherboard settings.

•

Make sure to unplug the power cord before installing or removing the motherboard

components. Failure to do so may cause physical injuries and damages to motherboard

components.

•

In order to avoid damage from static electricity to the motherboard’s components,

NEVER place your motherboard directly on a carpet. Also remember to use a grounded

wrist strap or touch a safety grounded object before you handle the components.

•

Hold components by the edges and do not touch the ICs.

•

Whenever you uninstall any components, place them on a grounded anti-static pad or

in the bag that comes with the components.

•

When placing screws to secure the motherboard to the chassis, please do not over-

tighten the screws! Doing so may damage the motherboard.

Chapter 2 Installation

11

English

B150M Pro4S

2.1 Installing the CPU

1. Before you insert the 1151-Pin CPU into th e socket , please check if the PnP cap is on the
socket, if the CPU sur face is unclean, or if the re are any bent pins in the socket . Do not
force to in sert the CPU into the socket if above situation is found. Otherwise, the CPU
will be seriously damaged.

2. Unplug all power c ables be fore installing the CPU.

1

2

A

B

12

English

4

5

3

13

English

B150M Pro4S

Please save and replace the cover if the processor is removed. e cove r must be placed if
you wish to return the motherboard for ae r service.

14

English

2.2 Installing the CPU Fan and Heatsink

1 2

CPU_

FAN

15

English

B150M Pro4S

2.3 Installing Memory Modules (DIMM)

is motherboard provides four 288-pin DDR4 (Double Data Rate 4) DIMM slots,

and supports Dual Channel Memory Technology.

Dual Channel Memory Conguration

e DIMM only ts in one correct orientation. It wil l cause permane nt damage to the
motherboard and the DIMM if you force the DIMM into the slot at incorrect orie ntation .

Priority DDR4_A1 DDR4_A2 DDR4_B1 DDR4_B2

1 Populated Populated
2 Populated Populated
3 Populated Populated Populated Populated

1. For dual channel conguration, you always need to install identical (the same brand,

speed , size and chip-type) DDR4 DIMM pairs.

2. It is unable to activate Dual Channel Me mory Technol ogy with only one or three memory
module installed.

3. It is not allowed to install a DDR, DDR2 or DDR3 memory module into a DDR4 slot;
otherwise, this mothe rboard and DI MM may be damaged.

16

English

1

2

3

17

English

B150M Pro4S

2.4 Expansion Slots (PCI Express Slots)

ere are 4 PCI Express slots on the motherboard.

PCIe slots:

PCIE1 (PCIe 3.0 x16 slot) is used for PCI Express x16 lane width graphics cards.

PCIE2 (PCIe 3.0 x1 slot) is used for PCI Express x1 lane width cards.

PCIE3 (PCIe 3.0 x1 slot) is used for PCI Express x1 lane width cards.

PCIE4 (PCIe 3.0 x16 slot) is used for PCI Express x4 lane width graphics cards.

PCIe Slot Congurations

For a better thermal environment, please connect a ch assis fan to the motherboard ’s
chassis fan connector (CHA _FAN1 or CHA_FAN2) when using multiple g raphics
cards.

Before installing an expansion card, plea se make sure that the power supply is
switched o or the power cord is unplugged. Please read the docume ntation of the
expan sion card and mak e necessary hardware settings for the card before you start
the installation.

PCIE1 PCIE4

Single Graphics Card x16 N/A

Two Graphics Cards in

CrossFireX

TM

Mode

x16 x4

18

English

2.5 Jumpers Setup

e illustration shows how jumpers are setup. When the jumper cap is placed on

the pins, the jumper is “Short”. If no jumper cap is placed on the pins, the jumper

is “Open”. e illustration shows a 3-pin jumper whose pin1 and pin2 are “Short”

when a jumper cap is placed on these 2 pins.

Clear CMOS Jumper

(C LR MOS 1)

(see p.6, No. 16)

CLRMOS1 allows you to clear the data in CMOS. To clear and reset the system

parameters to default setup, please turn o the computer and unplug the power

cord from the power supply. Aer waiting for 15 seconds, use a jumper cap to

short pin2 and pin3 on CLRMOS1 for 5 seconds. However, please do not clear the

CMOS right aer you update the BIOS. If you need to clear the CMOS when you

just nish updating the BIOS, you must boot up the system rst, and then shut it

down before you do the clear-CMOS action. Please be noted that the password,

date, time, and user default prole will be cleared only if the CMOS batter y is

removed.

Clear CMOS

Default

If you clear the CMOS, the case open may be detected. Please adjust the BIOS option “Cl ear
Status” to clear the record of previous ch assis intrus ion statu s.