ASRock B150M-HDV User manual

Version 1.0

Published June 2015

Copyright©2015 ASRock INC. All rights reser ved.

Copyright Notice:

No part of this documentation may be reproduced, transcribed, transmitted, or
translated in any language, in any form or by any means, except duplication of
documentation by the purchaser for backup purpose, without written consent of
ASRock Inc.

Products and corporate names appearing in this documentation may or may not
be registered trademarks or copyrights of their respective companies, and are used
only for identication or explanation and to the owners’ benet, without intent to

infringe.

Disclaimer:

Specications and information contained in this documentation are furnished for
informational use only and subject to change without notice, and should not be
constructed as a commitment by ASRock. ASRock assumes no responsibility for
any errors or omissions that may appear in this documentation.

With respect to the contents of this documentation, ASRock does not provide
warranty of any kind, either expressed or implied, including but not limited to
the implied warranties or conditions of merchantability or tness for a particular
purpose.

In no event shall ASRock, its directors, ocers, employees, or agents be liable for
any indirect, special, incidental, or consequential damages (including damages for
loss of prots, loss of business, loss of data, interruption of business and the like),
even if ASRock has been advised of the possibility of such damages arising from any
defect or error in the documentation or product.

is device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that

may cause undesired operation.

CALIFORNIA, USA ONLY

e Lithium battery adopted on this motherboard contains Perchlorate, a toxic substance
controlled in Perchlorate Best Management Practices (BMP) regulations passed by the
California Legislature. When you discard the Lithium battery in California, USA, please
follow the related regulations in advance.
“Perchlorate Material-special handling may apply, see ww w.dtsc.ca.gov/hazardouswaste/
perchlorate”

ASRock Website: http://www.asrock.com

e terms HDMI™ and HDMI High-Denition Multimedia Interface, and the HDMI
logo are trademarks or registered trademarks of HDMI Licensing LLC in the United
States and other countries.

Contents

Chapter 1 Introduction 1

1.1 Package Contents 1

1.2 Specications 2

1.3 Motherboard Layout 6

1.4 I/O Panel 8

Chapter 2 Installation 10

2.1 Installing the CPU 11

2.2 Installing the CPU Fan and Heatsink 14

2.3 Installing Memory Modules (DIMM) 15

2.4 Expansion Slots (PCI Express Slots) 17

2.5 Jumpers Setup 18

2.6 Onboard Headers and Connectors 19

Chapter 3 Software and Utilities Operation 23

3.1 Installing Drivers 23

3.2 ASRock Live Update & APP Shop 24

3.2.1 UI Overview 24

3.2.2 Apps 25

3.2.3 BIOS & Drivers 28

3.2.4 Setting 29

3.3 Enabling USB Ports for Windows® 7 Installation 30

Chapter 4 UEFI SETUP UTILITY 33

4.1 Introduction 33

4.1.1 UEFI Menu Bar 33

4.1.2 Navigation Keys 34

4.2 Main Screen 35

4.3 OC Tweaker Screen 36

4.4 Advanced Screen 44

4.4.1 CPU Conguration 45

4.4.2 Chipset Conguration 47

4.4.3 Storage Conguration 49

4.4.4 Super IO Conguration 50

4.4.5 ACPI Conguration 51

4.4.6 USB Conguration 53

4.4.7 Trusted Computing 54

4.5 Tools 55

4.6 Hardware Health Event Monitoring Screen 59

4.7 Security Screen 61

4.8 Boot Screen 62

4.9 Exit Screen 65

Chapter 1 Introduction

ank you for purchasing ASRock B150M-HDV motherboard, a reliable

motherboard produced under ASRock’s consistently stringent quality control.

It delivers excellent performance with robust design conforming to ASRock’s

commitment to quality and endurance.

In this documentation, Chapter 1 and 2 contains the introduction of the

motherboard and step-by-step installation guides. Chapter 3 contains the operation

guide of the soware and utilities. Chapter 4 contains the conguration guide of

the BIOS setup.

Becau se the motherboard specications and the BIOS soware might be updated, the
content of this documentation will be subject to change without notice. In case any
modications of this documentation occur, the updated version will be available on
ASRock’s website w ithout f urther notice. If you require technical support relate d to
this motherboard, please vi sit our website for s pecic information about the model
you are using. You may nd the l atest VGA cards and CPU suppor t list on ASRock’s
website a s well. ASRock website ht tp://www.a srock.com.

1.1 Package Contents

ASRock B150M-HDV Motherboard (Micro ATX Form Factor)

•

ASRock B150M-HDV Quick Installation Guide

•

ASRock B150M-HDV Support CD

•

2 x Serial ATA (SATA) Data Cables (Optional)

•

1 x I/O Panel Shield

•

B150M-HDV

English

1

English

1.2 Specications

Platform

CPU

Chipset

Memory

Expansion
Slot

Graphics

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

Micro ATX Form Factor

Solid Capacitor design

High Density Glass Fabric PCB

Supports 6th Generation Intel® CoreTM i7/i5/i3/Pentium®/

Celeron® Processors (Socket 1151)

Supports Intel® Turbo Boost 2.0 Technology

Intel® B150

Supports Intel® Small Business Advantage 4.0

Dual Channel DDR4 Memory Technology

2 x DDR4 DIMM Slots

Supports DDR4 2133 non-ECC, un-buered memory

Max. capacity of system memory: 32GB

Supports Intel® Extreme Memory Prole (XMP) 2.0

1 x PCI Express 3.0 x16 Slot (PCIE1: x16 mode)

2 x PCI Express 3.0 x1 Slots (Flexible PCIe)

Intel® HD Graphics Built-in Visuals and the VGA outputs

can be supported only with processors which are GPU

integrated.

Supports Intel® HD Graphics Built-in Visuals : Intel® Quick

Sync Video with AVC, MVC (S3D) and MPEG-2 Full

HW Encode1, Intel® InTruTM 3D, Intel® Clear Video HD

Technology, Intel® InsiderTM, Intel® HD Graphics 510/530

Pixel Shader 5.0, DirectX 12

Max. shared memory 1792MB

ree graphics output options: D-Sub, DVI-D and HDMI

Supports Triple Monitor

Supports HDMI with max. resolution up to 4K x 2K

(4096x2304) @ 24Hz

Supports DVI-D with ma x. resolution up to 1920x1200 @

60Hz

Supports D-Sub with max. resolution up to 1920x1200 @

60Hz

2

Audio

LAN

Supports Auto Lip Sync, Deep Color (12bpc), xvYCC and

•

HBR (High Bit Rate Audio) with HDMI Port (Compliant

HDMI monitor is required)

Supports Accelerated Media Codecs: HEVC, VP8, VP9

•

Supports HDCP with DVI-D and HDMI Ports

•

Supports Full HD 1080p Blu-ray (BD) playback with DVI-D

•

and HDMI Ports

7.1 CH HD Audio (Realtek ALC887 Audio Codec)

•

* To congure 7.1 CH HD Audio, it is required to use an HD

front panel audio module and enable the multi-channel audio

feature through the audio driver.

Supports Surge Protection (ASRock Full Spike Protection)

•

ELNA Audio Caps

•

PCIE x1 Gigabit LAN 10/100/1000 Mb/s

•

Realtek RTL8111E

•

Supports Wake-On-LAN

•

Supports Lightning/ESD Protection (ASRock Full Spike

•

Protection)

Supports LAN Cable Detection

•

Supports Energy Ecient Ethernet 802.3az

•

Supports PXE

•

B150M-HDV

Rear Panel
I/O

Storage

1 x PS/2 Mouse/Keyboard Port

•

1 x D-Sub Port

•

1 x DVI-D Port

•

1 x HDMI Port

•

2 x USB 2.0 Ports (Supports ESD Protection (ASRock Full

•

Spike Protection))

4 x USB 3.0 Ports (Supports ESD Protection (ASRock Full

•

Spike Protection))

1 x RJ-45 LAN Port with LED (ACT/LINK LED and SPEED

•

LED)

HD Audio Jacks: Line in / Front Speaker / Microphone

•

6 x SATA3 6.0 Gb/s Connectors, support NCQ, AHCI and

•

Hot Plug

English

3

Connector

BIOS
Feature

Hardware
Monitor

1 x COM Port Header

•

1 x TPM Header

•

1 x Chassis Intrusion and Speaker Header

•

1 x CPU Fan Connector (4-pin) (Smart Fan Speed Control)

•

1 x Chassis Fan Connector (4-pin) (Smart Fan Speed Con-

•

trol)

1 x 24 pin ATX Power Connector

•

1 x 4 pin 12V Power Connector

•

1 x Front Panel Audio Connector

•

2 x USB 2.0 Headers (Support 4 USB 2.0 ports) (Supports

•

ESD Protection (ASRock Full Spike Protection))

1 x USB 3.0 Header (Supports 2 USB 3.0 ports) (Supports

•

ESD Protection (ASRock Full Spike Protection))

128Mb AMI UEFI Legal BIOS with multilingual GUI sup-

•

port

ACPI 1.1 Compliant wake up events

•

SMBIOS 2.3.1 Support

•

CPU, GT_CPU, DRAM, VPPM, PCH 1.0V, VCCIO, VC-

•

CPLL, VCCSA Voltage Multi-adjustment

CPU/Chassis temperature sensing

•

CPU/Chassis Fan Tachometer

•

CPU/Chassis Quiet Fan (Auto adjust chassis fan speed by

•

CPU temperature)

CPU/Chassis Fan multi-speed control

•

CASE OPEN detection

•

Voltage monitoring: +12V, +5V, +3.3V, CPU Vcore, GT_CPU,

•

DRAM, VPPM, PCH 1.0V, VCCIO, VCCSA

English

4

OS

Microso® Windows® 10 64-bit / 8.1 64-bit / 7 32-bit / 7 64-

•

bit

* To install Windows® 7 OS, a modied installation disk with

xHCI drivers packed into the ISO le is required. Please refer to

page 30 for more detailed instructions.

* For the updated Windows® 10 driver, please visit ASRock ’s

website for details: http://ww w.asrock.com

FCC, CE, WHQL

Certica­tions

* For detailed product information, please visit our website: http://ww w.asrock.com

Please realize that the re is a certain r isk involved with overclo cking, including
adjusting the setting in the BIOS, applying Untied Overclocking Technol ogy, or using
third-party overclocking tool s. Overclocking may aect your system’s stability, or
even cause dam age to the components and devices of your system. It should be done
at your own risk and expense. We are not responsible for poss ible damage caused by
overclocking.

•

ErP/EuP Ready (ErP/EuP ready power supply is required)

•

B150M-HDV

English

5

1.3 Motherboard Layout

Intel

B150

DDR 4_B1 (6 4 bit, 28 8-pin m odule )

DDR 4_A1 (6 4 bit, 28 8-pin m odule )

USB 3. 0

T: USB0

B: USB 1

ATXP WR1

PCIE 1

Top:
RJ- 45

USB 2 .0
T: USB0
B: US B1

HDLED RESET

PLED P WRBTN

PANEL1

1

USB2_3

1

1

SPK_CI1

COM1

1

1

HD_AUD IO1

B150M- HDV

RoHS

HDM I1

DVI1

USB 3 .0
T: USB2
B: US B3

PS2

Keyb oard

/Mou se

CMO S

Bat tery

CLRMOS1

1

USB3_4_ 5

1

CPU_FAN1

USB_4_ 5

1

1

TPMS1

PCI Expr es s 3. 0

Front USB 3. 0

Top:

LINE I N

Cent er:

FRON T

Bott om:

MIC IN

SATA3_2_ 3

CHA_FAN1

PCIE 2

PCIE 3

ATX12V1

SATA3_4_ 5

SATA3_0

SATA3_1

VGA1

English

6

No. Description

1 ATX 12V Power Connector (ATX12V1)

2 CPU Fan Connector (CPU_FAN1)

3 2 x 288-pin DDR4 DIMM Slots (DDR4_A1, DDR4_B1)

4 ATX Power Connector (ATXPWR1)

5 TPM Header (TPMS1)

6 Clear CMOS Jumper (CLRMOS1)

7 SATA3 Connectors (SATA3_2_3)

8 SATA3 Connectors (SATA3_4_5)

9 Chassis Intrusion and Speaker Header (SPK_CI1)

10 System Panel Header (PANEL1)

11 SATA3 Connector (SATA3_0)

12 SATA3 Connector (SATA3_1)

13 USB 2.0 Header (USB_4_5)

14 USB 3.0 Header (USB3_4_5)

15 COM Port Header (COM1)

16 Chassis Fan Connector (CHA_FAN1)

17 Front Panel Audio Header (HD_AUDIO1)

18 USB 2.0 Header (USB2_3)

B150M-HDV

English

7

1.4 I/O Panel

1 3

2

4

5

English

11 679

10

8

No. Description No. Description

1 PS/2 Mouse/Keyboard Port 7 USB 2.0 Ports (USB01)

2 D-Sub Port 8 USB 3.0 Ports (USB_23)

3 LAN RJ-45 Port* 9 HDMI Port

4 Line In (Light Blue)** 10 DVI-D Port

5 Front Speaker (Lime)** 11 USB 3.0 Ports (USB3_01)

6 Microphone (Pink)**

* ere are two LEDs on the LAN port. Please refer to the table below for the LAN port LED indications.

ACT/LINK L ED

SPEED LE D

LAN Por t

Activity / Link LED Speed LED

Status Description Status Description

O No Link O 10Mbps connection
Blinking Data Activity Orange 100Mbps connection
On Link Green 1Gbps connection

8

** To congure 7.1 CH HD Audio, it i s required to use an HD front panel audio module and enable the multi­channel audio feature through the audio driver.

Please set Speaker Conguration to “7.1 Speaker”in the Realtek HD Audio Manager.

B150M-HDV

Function of the Audio Por ts in 7.1-channel Con guration:

Port Function

Light Blue (Rear panel) Rear Speaker Out
Lime (Rear panel) Front Speaker Out
Pink (Rear panel) Central /Subwoofer Speaker Out
Lime (Front panel) Side Speaker Out

English

9

Chapter 2 Installation

is is a Micro ATX form factor motherboard. Before you install the motherboard,

study the conguration of your chassis to ensure that the motherboard ts into it.

Pre-installation Precautions

Take note of the following precautions before you install motherboard components

or change any motherboard settings.

Make sure to unplug the power cord before installing or removing the motherboard

•

components. Failure to do so may cause physical injuries and damages to motherboard

components.

In order to avoid damage from static electricity to the motherboard’s components,

•

NEVER place your motherboard directly on a carpet. Also remember to use a grounded

wrist strap or touch a safety grounded object before you handle the components.

Hold components by the edges and do not touch the ICs.

•

Whenever you uninstall any components, place them on a grounded anti-static pad or

•

in the bag that comes with the components.

When placing screws to secure the motherboard to the chassis, please do not over-

•

tighten the screws! Doing so may damage the motherboard.

English

10

2.1 Installing the CPU

1. Before you insert th e 1151-Pin CPU into the sock et, please check if the PnP cap
is on the socket, if the CPU sur face is unclean, or if th ere are any b ent pins in the
socket. Do not force to insert the CPU into the socket if above situ ation is found.
Other wise, the CPU wil l be seriously d amaged.

2. Unplug all powe r cable s before installing the CPU.

1

B150M-HDV

A

B

2

English

11

4

5

3

12

English

Please save and replace the cover if the processor i s removed. e cover must be
placed if you wish to return the motherboard for aer service.

B150M-HDV

13

English

2.2 Installing the CPU Fan and Heatsink

1 2

English

14

FAN

CPU_

2.3 Installing Memory Modules (DIMM)

is motherboard provides two 288-pin DDR4 (Double Data Rate 4) DIMM slots,

and supports Dual Channel Memory Technology.

1. For dual channel cong uration, you always need to install identical (the same

brand, speed , size and chip-type) DDR4 DIMM pairs.

2. It is un able to activate D ual Channel Memory Technology with only one memory
module instal led.

3. It is not allowed to install a DDR, DDR 2 or DDR3 memory module into a DDR4
slot; otherwise, this motherboard and DIMM may be damaged.

e DIMM only ts in one correct orientation. It will cause permanent dam age to
the mothe rboard and the DIMM if you force the DIMM into the slot at incor rect
orientation .

B150M-HDV

15

English

1

2

3

16

English

2.4 Expansion Slots (PCI Express Slots)

ere are 3 PCI Express slots on the motherboard.

Before installing an ex pansion card, please make sure that the power supply is
switched o or the power cord is unplugged. Plea se read the documentation of the
expan sion card and mak e necessary hardware settings for the card before you start
the installation.

PCIe slots:

PCIE1 (PCIe 3.0 x16 slot) is used for PCI Express x16 lane width graphics cards.

PCIE2 (PCIe 3.0 x1 slot) is used for PCI Express x1 lane width cards.

PCIE3 (PCIe 3.0 x1 slot) is used for PCI Express x1 lane width cards.

B150M-HDV

17

English