Asoka PL9650-ETH User Manual

0 (0)

User’s Guide

PlugLink 9650 Ethernet Adapter

PL9650-ETH

© 2006 Asoka USA Corporation. Asoka, PlugLink and the Asoka logo are registered trademarks or trademarks of Asoka USA Corporation. Information is subject to change without notice. All rights reserved.

PL9650UG-110105

Asoka® User’s Guide

PlugLink 9650 Ethernet Adapter PL9650-ETH

Table of Content

Chapter

Title

Page

1

Introduction

3

2

Important Safety Information

4

3

Learning About your Powerline Ethernet Adapter

5

4

Preparing to Install

7

5

Installing the Powerline Ethernet Adapter

9

6

Using Setup Assistant

14

7

Using Admin Utility

17

8

Technical Support Information

21

9

Technical Specifications

22

10

FCC Statement

23

11

CE Statement

24

 

 

12

WarrantyInformation

25

Page 2 of 26

Asoka® User’s Guide

PlugLink 9650 Ethernet Adapter PL9650-ETH

Chapter 1

Introduction

Thank you for purchasing a PlugLink 9650 Ethernet Adapter (PL9650-ETH) from Asoka. This adapter lets you network your home or office by simply plugging directly into your wall outlet. Now, networking is as easy as plugging in a night light. With your PlugLink 9650 Ethernet Adapter, you can easily share your high-speed Internet broadband, mp3s, video and gaming throughout the home or office without pulling any new cabling.

This unit will not interfere with other household appliances such as hair dryers, vacuum cleaners or microwave ovens. Consuming only 5 watts of power, it is environmentally friendly and will not noticeably increase your electrical bill. It is a simple, secure and reliable choice for web surfing, playing games, complimenting your existing wireless network, mp3 streaming and even highdefinition (HD) video sharing.

This User’s Guide shows you how to connect your PlugLink 9650 Ethernet Adapter to your PC or cable/DSL router. Setup is easy, just follow the instructions in this guide and your network will be up and running in a matter of minutes.

Page 3 of 26

Asoka® User’s Guide

PlugLink 9650 Ethernet Adapter PL9650-ETH

Chapter 2

Important Safety Instruction for the PlugLink 9650 Ethernet Adapter

The following precautions should be taken when using this product:

Read all instructions before installing and operating this product.

Do not open the cover on this product and/or alter this product in any way.

Follow common household electrical safety practices.

If you have any questions or concerns regarding these safety measures, please contact Technical Support at 650-286-0300 or email at support@asokausa.com Monday through Friday from 9:00 am to 5:00 pm PST, excluding holidays.

Page 4 of 26

Asoka® User’s Guide

PlugLink 9650 Ethernet Adapter PL9650-ETH

Chapter 3

Learning about your PlugLink 9650 Ethernet Adapter

Package Contents

PlugLink 9650 Ethernet Adapter (PL9650-ETH)

6 feet Ethernet cable

Quick Installation Guide

Installation Resource CD

Warranty and Support Information Card

If any of the parts are incorrect, missing, or damaged, contact the retailer where you made your purchase. Keep the carton, including the original packing materials, in case you need to return the unit for repair.

The Front Panel

The front panel of the PL9650-ETH Adapter contains the status lights described below.

Figure 3-1: PL9650-ETH Front Panel

You can use the status lights to verify connections. Viewed from top to bottom, left to right, the table describes the lights on the front panel of the unit.

Table 3-1: Status Light Descriptions

Power

On

Indicates Device Powered On

 

Off

Indicates No Power

PLC Activity

Blinking

Indicates Activity on Powerline

 

Off

Indicates No Activity on Powerline

 

 

(Should blink Intermittently)

ETH Link

On

Indicates Ethernet Connectivity

 

Blinking

Indicates Ethernet Traffic

 

Off

Indicates No Ethernet Activity

Page 5 of 26

As oka® U s er ’s Gui de

Pl ugLi nk 9650 Ether net Adapter PL9650-ETH

The Bottom Panel

The bottom panel of the PL9650-ETH contains an Ethernet (RJ-45) port as shown in figure 3-2.

Figure 3-1: PL9650-ETH Front Panel

The Rear Panel

The label on the rear panel of the PL9650-ETH Adapter contains the items listed below.

MAC address

Model number

Part number

Serial number

Unique device password

Note: For future convenience, please write this information down in your Warranty Support Information card.

Figure 3-3: Rear Label

Page 6 of 26

Asoka PL9650-ETH User Manual

Asoka® User’s Guide

PlugLink 9650 Ethernet Adapter PL9650-ETH

Chapter 4

Preparing to Install the PlugLink 9650 Ethernet Adapter

The PlugLink 9650 Ethernet Adapter lets you set up a home or an office network using your existing electrical outlets. It can also easily compliment your existing network by connecting to any device with a 10BaseT/ 100BaseT Ethernet-capable device.

In order to share a peer-to-peer connection between computers, all you will need is:

One (1) PL9650-ETH device attached to each computer.

Figure 4-1: Peer-to-peer network diagram.

In order to share a Broadband connection between computers, all you will need is:

One (1) PL9650-ETH device attached to each computer

Standard Cable/DSL Modem

Standard Cable/DSL Router or Wireless Router

[

Figure 4-2: Sharing broadband connection network diagram.

Page 7 of 26

Asoka® User’s Guide

PlugLink 9650 Ethernet Adapter PL9650-ETH

You can also use the PlugLink 9650 Ethernet Adapter with other Ethernet enabled device like IP Cameras, IP STB, game consoles, and many more.

Figure: 4-3: Networking other Ethernet enabled devices.

Page 8 of 26

Loading...
+ 18 hidden pages