Ashland B-300 User Manual

BUCHLI

MASTER PARTS BOOK

B-300 Scraper

ver 12-02

Ashland Industries Inc.
1115 Rail Drive
P.O. Box 717
Ashland, WI. 54806
Ph: 877-634-4622
Ph: 715-682-4622
Fx: 715-682-9717
www.ashlandind.com

To ll Fr e e

INDEX PAGE
B-300 Scraper

How to order parts:

Be sure to state MODEL and SERIAL NO. of machine, PARTS
NO., DESCRIPTION, and QUANTITY wanted.

Unless this is done, we cannot give you prompt service or
send the correct parts.

I N D E X

Page No. Illustration & Parts List

3 - 4 Frame, Hose, and Pole Ass’y
5 - 6 Actuating and Sub Frame Ass’y
7 - 8 Bucket, Apron and Cutting Edges
9 Hyd. Cylinder, 4” x 16” early, Model FEQS-12
10 Wheel, Hub, Bearing & Spindle Ass’y
11 Hyd. Cylinder, 3" x 16" (high pressure) early, Model FEQS-13B (opt)
12 Hyd. Cylinder, 4” x 16” current, Model 416 DAW
13 Hyd. Cylinder, 3” x 16” (high pressure) current, Model B316H1 (opt)

PAGE 2

FRAME, HOSE, AND POLE ASSEMBLY

PAGE 3

PARTS LIST

FRAME, HOSE AND POLE ASSEMBLY

B-300 SCRAPER

Key No. Part No. Description

1 116 Hydraulic hose, 3/8" x 33"
2 115 Hydraulic hose, 3/8" x 24"

Swivel adapter, 3/8" straight

Swivel adapter, 3/8" 90 degree
B300 HO1 Hydraulic hose, 1/2" x 84" (scraper to tractor)
B300 HO2 Male hydraulic coupler end, 1/2" Pioneer

3 3001 Frame (used up to sn 2205)

3001A Frame (used on sn 2250 to sn 2527)
B30001B Frame (used on sn 2536 and up)

4 Nut, 1" NF

Lockwasher, 1"

Flat washer, 1"

5 209 Roller (used up to sn 2527)

B30002 Roller (used on sn 2536 and up)

6 209A Shoulder pin, 1-1/8" shoulder, 1-1/4" to 1" NF

(used up to sn 2527)
B30003 Shoulder pin, 2-1/2" shoulder, 1-1/4" to 1" NF

(used on sn 2536 and up)

7 Bolt, 5/8" x 4" w/nut and LW
8 3002 Zerk, 1/8" NPT (long shank)
9 300F Cast ball socket (front half)
10 300R Cast ball socket (rear half w/zerk hole)
11 216 Ball swivel 1-1/4" NF (4-1/2" shank, used up to sn 2205)

216A Ball swivel 1-1/4" NF (2" shank, used on sn 2250 and up)

Lockwasher, 1-1/4"

Nut, 1-1/4" NF

12 3003 Pole and axle ass’y (used up to sn 2205)

3003A Pole and axle ass’y (used on sn 2250 and up)

13 Capscrew, 1" x 6" NF

Nut, 1" NF castellated

Cotter pin, 3/16" x 1-1/2"

14 3004A Swivel hitch
15 B30007 Cutting edge, side cutter

Plow bolt, 1/2" x 1-1/2" w/nut

16 B30008 Side cutter, left (optional)

B30026 Side cutter, right (optional)

Bolt, 3/4" x 5-1/2" w/nut

PAGE 4