Aruba IAP-274 Data sheet
DATA SHEET
ARUBA 270 SERIES
OUTDOOR ACCESS POINTS
Setting a higher standard for 802.11ac
Innovative and aesthetically-designed 270 series
outdoor wireless access points deliver gigabit Wi-Fi
performance to 802.11ac mobile devices under any
weather conditions. The 270 series is also the only
outdoor AP that enables 802.11n clients to operate
three-times faster at greater distances.
Purpose-built to survive in the harshest outdoor
environments, 270 series APs withstand exposure to
extreme high and low temperatures, persistent moisture
and precipitation, and are fully sealed to keep out airborne
contaminants. All electrical interfaces include industrial-
strength surge protection.
With a maximum data rate of 1.3 Gbps in the 5-GHz band
and 600 Mbps in the 2.4-GHz band, 270 series outdoor APs
supports concurrent dual-radio operation at speeds that
greatly exceed Fast Ethernet.
WI-FI CLIENT OPTIMIZATION
To eliminate sticky client behavior and ensure consistently
high performance, every Aruba AP includes ClientMatch
technology, which gathers session performance metrics that
steer mobile devices to the best AP and radio on the WLAN
in real time.
UNIQUE BENEFITS
• Innovative industrial design
- Eliminates installation complexity
- Inconspicuous design that improves aesthetics
- Delivers IP66- and IP67-rated protection from
the elements
• Best-in-class RF management
- Integrated Adaptive Radio Management technology
manages the 2.4-GHz and 5-GHz radio bands and
ensures that APs stay clear of RF interference
• Reliable and predictable Wi-Fi performance
- Patented ClientMatch technology ensures that
roaming clients associate with the best AP to
maximize performance
- AppRF technology identies and prioritizes applications
on the network
• Spectrum analysis
- Capable of part-time or dedicated spectrum analysis,
which scans the 2.4-GHz and 5-GHz radio bands to
identify sources of RF interference
• Limited lifetime warranty – an industry rst for outdoors
CHOOSE YOUR OPERATING MODE
The 270 series of outdoor APs oers a choice of operating
modes to meet your unique management and
deployment requirements.
• Controller-managed AP or Remote AP (RAP) running
ArubaOS. When managed by Aruba Mobility Controllers,
the 270 series oers centralized conguration, data
encryption, policy enforcement and network services, as
well as distributed and centralized trac forwarding.
• Aruba Instant AP running InstantOS. In Aruba Instant
mode, one AP automatically distributes the network
conguration to other APs. Just power-up one Instant AP,
congure it over the air, and plug in the other APs – the
entire process takes about ve minutes.
• Secure enterprise mesh
DATA SHEET
ARUBA 270 SERIES OUTDOOR ACCESS POINTS
In addition to operation mode, the APs can be optionally
congured to perform the following functions:
• Spectrum analysis: Dedicated scan mode identies
sources of RF interference.
• Air monitoring: Dedicated scan mode provides wireless
intrusion protection.
• Hybrid AP: Serves Wi-Fi clients and simultaneously provides
wireless intrusion protection and spectrum analysis.
For large installations with multiple sites, the Aruba Activate
service reduces deployment time by automating provisioning,
rmware upgrades, and inventory management. With Aruba
Activate, Instant APs are factor y shipped to any site and
congure themselves when powered up.
If WLAN and network requirements change, a built-in
migration path allows 270 series Instant APs to become part
of a WLAN that is centrally managed by a Mobility Controller.
ACCESS POINT MODELS
• AP-274 and IAP-274
- 2.4-GHz and 5-GHz radios, each with 3x3 MIMO and
three external antenna connectors
• AP-275 and IAP-275
- 2.4-GHz and 5-GHz radios, each with 3x3 MIMO and
three integrated omni-directional antennas
• AP-277 and IAP-277
- 2.4-GHz and 5-GHz radios, each with 3x3 MIMO and three
integrated 80º H x 80º V beamwidth directional antennas
WIRELESS RADIO SPECIFICATIONS
• AP type: Outdoor, dual radio, 5-GHz 802.11ac and
2.4-GHz 802.11n
- In addition to 802.11n data rates, the 2.4-GHz radio
supports 802.11ac 256-QAM modulation. This gives
TurboQAM-enabled clients a 33% boost to deliver up
to 600 Mbps.
• Supported frequency bands (country-specic
restrictions apply):
- 2.4000 GHz to 2.4835 GHz
- 5.150 GHz to 5.250 GHz
- 5.250 GHz to 5.350 GHz
- 5.470 GHz to 5.725 GHz
- 5.725 GHz to 5.875 GHz
• Available channels: Dependent upon congured
regulatory domain
• Dynamic frequency selection (DFS) optimizes the use of
available RF spectrum
• Supported radio technologies:
- 802.11b: Direct-sequence spread-spectrum (DSSS)
- 802.11a/g/n/ac: Orthogonal frequency-division
multiplexing (OFDM)
- 802.11n/ac: 3x3 MIMO with up to three spatial streams
• Supported modulation types:
- 802.11b: BPSK, QPSK, CCK
- 802.11a/g/n: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM
(with TurboQAM clients)
- 802.11ac: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM
• Transmit power: Congurable in increments of 0.5 dBm
• Maximum (aggregate, conducted total) transmit power
(limited by local regulatory requirements):
- 2.4-GHz band: +28 dBm (23 dBm per chain)
- 5-GHz bands: +28 dBm (23 dBm per chain)
• Advanced cellular coexistence (ACC) feature to minimize
interference from cellular systems
• Maximum ratio combining (MRC) for improved
receiver performance
• Cyclic delay diversity (CDD) for improved downlink
RF performance
• Short guard interval for 20-MHz, 40-MHz and
80-MHz channels
• Space-time block coding (STBC) for increased range and
improved reception
• Low-density parity check (LDPC) for high-eciency error
correction and increased throughput
• Explicit transmit beam-forming (TxBF) for increased
reliability in signal delivery
• Supported data rates (Mbps):
- 802.11b: 1, 2, 5.5, 11
- 802.11a/g: 6, 9, 12, 18, 24, 36, 48, 54
- 802.11n: 6.5 to 450 (MCS0 to MCS23, 1 to 3
spatial streams)
- 802.11ac: 6.5 to 1,300 (MCS0 to MCS9, 1 to 3
spatial streams)
• 802.11n high-throughput (HT) support: HT 20/40
• 802.11ac very high throughput (VHT) support:
VHT 20/40/80
• 802.11n/ac packet aggregation: A-MPDU, A-MSDU Power
• Maximum power consumption: 23 watts
• Direct AC source: 100-240-Volt AC
• Power over Ethernet (PoE): 48 Vdc (nominal)
802.3at compliant
Loading...