Aruba 5406R, 5412R QuickSpecs

QuickSpecs

Aruba 5400R zl2 Switch Series

Overview

Aruba 5400R zl2 Switch Series

The Aruba 5400R zl2 Switch Series delivers enterprise-class resiliency with innovative flexibility and scalability for customers creating series brings scalable aggregation with Virtual Switching Framework (VSF) stacking technology, hitless failover, and Fast Sof Upgrade f robust QoS and policy

Based on a powerful ProVision ASIC, the Aruba 5400R zl2 Switch Series crossbar switching fabric with low 2.1 This series offers flexible connectivity options with 6 or 12 slot multigigabit or 10GbE to deploy, use and manage using Aruba AirWave or Aruba Central. portal support. The switches include a Limited Lifetime Warranty.

Aruba 5412R zl2 Switch

Key Features

•

• Advanced security and network management via Aruba ClearPass Policy Manager, Aruba AirWave and Aruba Central

smart digital workplaces that are optimized for mobile users with an integrated wired and wireless approach. This modular

tware

or 5400R VSF stacks. The advanced Layer 2 and 3 feature set includes OSPF, IPv6, IPv4 BGP, dynamic segregation,

-based routing with no software licensing required.

has a high-speed, high-capacity architecture with 2 Tbps

µ robust feature support, and value with flexible programmability for the latest applications.

compact chassis, line rate 40GbE, up to 96 line rate Smart Rate

ports and up to 288 ports of PoE+ for powering access points, cameras and IoT devices. The 5400R is easy

Aruba ClearPass offers centralized security and external captive

Powerful Aruba Layer 3 modular switch with VSF stacking, dynamic segmentation, low latency and resiliency.

• HPE Smart Rate for high speed multi gigabit bandwidth and PoE+ power.

• Scalable with line rate 40GbE for wireless traffic aggregation.

• Resilient with redundant management and hot swappable power supplies.

• Up to 288 ports of PoE+

• Software-defined ready with REST APIs and OpenFlow support.

Page

QuickSpecs

Aruba 5400R zl2 Switch Series

Overview

Models

Aruba 5406R zl2 Switch

J9821A

Aruba 5412R zl2 Switch

J9822A

Aruba 5412R 92GT PoE+ and 4-port SFP+ (No PSU) v3 zl2 Switch

JL001A

Aruba 5406R 8-port 1/2.5/5/10GBASE-T PoE+ / 8-port SFP+ (No PSU) v3 zl2 Switch

JL002A

Aruba 5406R 44GT PoE+ and 4-port SFP+ (No PSU) v3 zl2 Switch

JL003A

Aruba 5406R 16-port SFP+ (No PSU) v3 zl2 Switch

JL095A

Page

QuickSpecs

Aruba 5400R zl2 Switch Series

Standard Features

Enhanced Capabilities

Simplified configuration and management

Advertises and receives management information from adjacent devices on a network, facilitating easy mapping by network

Stores easily to the flash image

Connectivity

provides automatic adjustments for straight-through or crossover cables on all 10/100 and 10/100/1000 ports

• Aruba Central cloud-based management platform

Offers simple, secure, and cost effective way to manage switches

• Zero Touch ProVisioning (ZTP)

Simplifies installation of the switch infrastructure using Aruba Activate-based or DHCP based process with AirWave and Central Network Management

• Flexible management

Supports both cloud-based Central and on-premise AirWave without ripping and replacing switching infrastructure

• IP SLA for Voice

Monitors quality of voice traffic using the UDP Jitter and UDP Jitter for VoIP tests (requires v3 modules).

• Built-in programmable and easy to use REST API interface

provides configuration automation for campus networks

• Remote intelligent mirroring

Mirrors selected ingress/egress traffic based on ACL, port, MAC address, or VLAN to a local or remote HPE 8200 zl, 6600, 6200 yl, 5400 zl, 5400R, 3500, or 3800 Switch located anywhere on the network

• RMON, XRMON, and sFlow

Provide advanced monitoring and reporting capabilities for statistics, history, alarms, and events

• IEEE 802.1AB Link Layer Discovery Protocol (LLDP)

management applications

• Unidirectional link detection (UDLD)

Monitors the link between two switches and blocks the ports on both ends of the link if the link goes down at any point between the two devices

• Management simplicity

Provides common software features and CLI implementation across all HPE ProVision-based switches (including the zl and yl switches)

• Command authorization

Leverages RADIUS to link a custom list of CLI commands to an individual network administrator's login; an audit trail documents activity

• Friendly port names

Allow assignment of descriptive names to ports

• Dual flash images

Provides independent primary and secondary operating system files for backup while upgrading

• Multiple configuration files

• IEEE 802.3az Energy Efficient Ethernet

lowers power consumption in periods of low link usage (supported on v2 and higher 10/100/1000 and 10/100 modules)

• IEEE 802.3at Power over Ethernet (PoE+)

provides up to 30 W per port that allows support of the latest PoE+ capable devices such as IP phones, wireless access points, and security cameras, as well as any IEEE 802.3af-compliant end device; eliminates the cost of additional electrical cabling and circuits that would otherwise be necessary in IP phone and WLAN deployments

• Support for pre-standard PoE

detects and provides power to pre-standard PoE devices

• High-density port connectivity

provides up to 12 interface module slots and up to 288 wire-speed 10/100/1000 PoE-enabled ports, 96 10-GbE ports , or 96 Smart Rate multi-gigabit ports per system

• Jumbo frames

support high-performance remote backup and disaster-recovery services

• Auto-MDIX

Page

QuickSpecs

Aruba 5400R zl2 Switch Series

Standard Features

Resiliency and high availability

allows groups of two routers to dynamically back each other up to create highly available routed environments for IPv4 and

provides easy-to-configure link redundancy of active and standby links

Performance

requirements of the network applications

Software-defined networks

troubleshooting.

• Virtual Switching Framework (VSF)

creates one virtual resilient switch from two switches; servers or switches can be attached using standard LACP for automatic load balancing and high availability; simplify network operation by reduce the need for complex protocols like Spanning Tree Protocol (STP), Equal-Cost Multipath (ECMP), and VRRP (requires v3 modules).

• Fast Software Upgrade

reduces downtime of the VSF stack during an upgrade by sequentially upgrading the members in the stack shrinking the downtime to a few seconds (requires v3 modules).

• Virtual Router Redundancy Protocol (VRRP)

IPv6 networks

• Nonstop switching

improves network availability to better support critical applications such as unified communication and mobility; interface and fabric modules continue switching traffic during failover from active to standby management module

• Nonstop routing

enhances Layer 3 high availability; OSPFv2/v3 and VRRP will continue to operate and route network traffic during failover from an active to a standby management module

• Redundant management and power

provide enhanced system availability and continuity of operations

• IEEE 802.1s Multiple Spanning Tree Protocol

provides high link availability in multiple VLAN environments by allowing multiple spanning trees; encompasses IEEE

802.1D Spanning Tree Protocol and IEEE 802.1w Rapid Spanning Tree Protocol

• IEEE 802.3ad Link Aggregation Control Protocol (LACP) and Hewlett Packard Enterprise port trunking

support up to 144 trunks, each with up to eight links (ports) per trunk

• Distributed trunking

enables loop-free and redundant network topology without using Spanning Tree Protocol; allows a server or switch to connect to two switches using one logical trunk for redundancy and load sharing

• Optional redundant power supply

provides uninterrupted power and allows hot-swapping of the redundant power supplies when installed

• Hot-swappable modules

allows dissimilar modules, and power supplies in a redundant power supply configuration to be added or swapped without interrupting the network

• Sparing simplicity

with zl-common accessories (interface modules and power supplies)

• Uplink Failure Detection

provides active-standby network path redundancy for servers that are configured for active-standby NIC teaming

• SmartLink

• High-speed, high-capacity architecture

2 Tbps crossbar switching fabric provides intra-module and inter-module switching with 785.7 million pps throughput on the purpose-built ProVision ASICs

• Selectable queue configurations

allows for increased performance by selecting the number of queues and associated memory buffering that best meet the

• Multiple programmatic interfaces

Supports REST APIs, Openflow 1.0 and 1.3, and more, to enable automation of network operations, monitoring, and

Page

QuickSpecs

Aruba 5400R zl2 Switch Series

Standard Features

Quality of Service (QoS)

VLAN

Unified Wired and Wireless Support

Automatically configures switch for different settings such as VLAN, CoS, PoE max power, and PoE priority when an Aruba

Node, users are authenticated with ClearPass Policy Manager which can direct the traffic to be tunneled

Provides a way for ClearPass to do accounting for clients with static IP addresses

Layer 3 routing

• provides IPv4 Border Gateway Protocol routing, which is scalable, robust, and flexible

• Advanced classifier-based QoS

Classifies traffic using multiple match criteria based on Layer 2, 3, and 4 information; applies QoS policies such as setting priority level and rate limit to selected traffic on a per-port or per-VLAN basis

• Traffic prioritization

Allows real-time traffic classification into eight priority levels mapped to eight queues

• Bandwidth shaping

− Port-based rate limiting

provides per-port ingress-/egress-enforced increased bandwidth

− Classifier-based rate limiting

uses an access control list (ACL) to enforce increased bandwidth for ingress traffic on each port

− Supports per-port, per-queue

egress-based reduced bandwidth

• Class of Service (CoS)

Sets the IEEE 802.1p priority tag based on IP address, IP Type of Service (ToS), Layer 3 protocol, TCP/UDP port number, source port, and DiffServ

• Unknown Unicast Rate Limiting throttles unicast packets with unknown destination addresses and limits flooding on the

• Supports unified wired and wireless policies

Using Aruba ClearPass Policy Manager

• Switch auto-configuration

access point is detected.

• User role

Defines a set of switch-based policies in areas such as security, authentication, and QoS. A user role can be assigned to a group of users or devices, using switch-based local user role or download from ClearPass.

• Improved network simplicity and security

• Aruba Dynamic Segmentation automatically enforces user, device and application-aware policies on Aruba wired and

wireless networks. Automated device profiling, role-based access control, and Layer 7 firewall features deliver enhanced visibility and performance for a better overall experience for both IT and end-users alike.

• Dynamic segregation

Provides a secured tunnel to transport network traffic on a per-port or per-user-role basis to an Aruba Controller. In peruser-role Tunneled to Aruba controller or switch locally.

• Static IP visibility

• Static IP routing

provides manually configured routing for both IPv4 and IPv6 networks

• Routing Information Protocol (RIP)

provides RIPv1, RIPv2, and RIPng routing

• OSPF

provides OSPFv2 for IPv4 routing and OSPFv3 for IPv6 routing

• Policy-based routing

uses a classifier to select traffic that can be forwarded based on policy set by the network administrator (requires v2 or higher modules)

• Border Gateway Protocol (BGP)

Page

QuickSpecs

Aruba 5400R zl2 Switch Series

Standard Features

Layer 3 services

centralizes and reduces the cost of IPv4 address management

IPv6

provides RA guard, DHCPv6 protection, dynamic IPv6 lockdown, and ND snooping

Layer 2 switching

concurrent Layer 3 routing with v2 or higher modules

• Bidirectional Forwarding Detection (BFD)

monitor link connectivity and reduces network convergence time for OSPFv2, and VRRP (requires v3 modules)

• User Datagram Protocol (UDP) helper function

allows UDP broadcasts to be directed across router interfaces to specific IP unicast or subnet broadcast addresses and prevents server spoofing for UDP services such as DHCP

• Loopback interface address

defines an address in Routing Information Protocol (RIP) and Open Standard Path First (OSPF), improving diagnostic capability

• Route maps

provide more control during route redistribution; allow filtering and altering of route metrics

• DHCP server

• IPv6 host

• enables switch management in an IPv6 network

• Dual stack (IPv4 and IPv6)

• transitions IPv4 to IPv6, supporting connectivity for both protocols

• MLD snooping

• forwards IPv6 multicast traffic to the appropriate interface

• IPv6 ACL/QoS

• supports ACL and QoS for IPv6 traffic

• IPv6 routing

• supports static, RIPng, OSPFv3 routing protocols

• 6in4 tunneling

• supports encapsulation of IPv6 traffic in IPv4 packets

• Security

• VLAN support and tagging

supports the IEEE 802.1Q standard and 4094 VLANs simultaneously

• IEEE 802.1v protocol VLANs

isolate select non-IPv4 protocols automatically into their own VLANs

• VxLAN

encapsulation (tunneling) protocol for overlay network that enables a more scalable virtual network deployment (requires v3 modules)

• GVRP and MVRP

allows automatic learning and dynamic assignment of VLANs

• IEEE 802.1ad Q-in-Q

increases the scalability of an Ethernet network by providing a hierarchical structure; connects multiple LANs on a highspeed campus or metro network

• MAC-based VLAN

provides granular control and security; uses RADIUS to map a MAC address/user to specific VLANs (requires v2 or higher modules)

• Rapid Per-VLAN Spanning Tree (RPVST+)

allows each VLAN to build a separate spanning tree to improve link bandwidth usage; is compatible with PVST+

• Hewlett Packard Enterprise switch meshing

dynamically load balances across multiple active redundant links to increase available aggregate bandwidth; allows

Page

QuickSpecs

Aruba 5400R zl2 Switch Series

Standard Features

Security

source/destination TCP/UDP port number

s per switch port accepts up to 32 sessions of IEEE

e with other ports in the same community and/or an uplink port, regardless of VLAN ID or

• Secure Sockets Layer (SSL)

• Control plane policing

sets rate limit on control protocols to protect CPU overload from DOS attacks

• Access control lists (ACLs)

provide filtering based on the IP field, source/destination IP address/subnet, and on a per-VLAN or per-port basis

• Multiple user authentication methods

– uses an IEEE 802.1X supplicant on the client in conjunction with a RADIUS server to authenticate in accordance

with industry standards

– Web-based authentication provides a browser-based environment, similar to IEEE 802.1X, to authenticate clients

that do not support IEEE 802.1X

– Supports MAC-based client authentication MAC-based authentication – Concurrent IEEE 802.1X, Web, and MAC authentication scheme

802.1X, Web, and MAC authentications

• Private VLAN

provides network security by restricting peer-to-peer communication to prevent a variety of malicious attacks; typically a switch port can only communicat destination MAC address

• DHCP protection

blocks DHCP packets from unauthorized DHCP servers, preventing denial-of-service attacks

• Secure management access

delivers secure encryption of all access methods (CLI, GUI, or MIB) through SSHv2, SSL, and/or SNMPv3

• Switch CPU protection

provides automatic protection against malicious network traffic trying to shut down the switch

• ICMP throttling

defeats ICMP denial-of-service attacks by enabling any switch port to automatically throttle ICMP traffic

• Identity-driven ACL

enables implementation of a highly granular and flexible access security policy and VLAN

• assignment specific to each authenticated network user

• STP BPDU port protection

blocks Bridge Protocol Data Units (BPDUs) on ports that do not require BPDUs, preventing forged BPDU attacks

• Dynamic IP lockdown

works with DHCP protection to block traffic from unauthorized hosts, preventing IP source address spoofing

• Dynamic ARP protection

blocks ARP broadcasts from unauthorized hosts, preventing eavesdropping or theft of network data

• STP Root Guard

protects the root bridge from malicious attacks or configuration mistakes

• Detection of malicious attacks

monitors 10 types of network traffic and sends a warning when an anomaly that potentially can be caused by malicious attacks is detected

• Port security

allows access only to specified MAC addresses, which can be learned or specified by the administrator

• MAC address lockout

prevents particular configured MAC addresses from connecting to the network

• Source-port filtering

allows only specified ports to communicate with each other

• RADIUS/TACACS+

eases switch management security administration by using a password authentication server

• Secure Shell

encrypts all transmitted data for secure remote CLI access over IP networks

• Radius over TLS (RadSec)

allows users to use a more secure and reliable mode of communications between switch and radius servers over unsecure networks

Page

QuickSpecs

Aruba 5400R zl2 Switch Series

Standard Features

encrypts all HTTP traffic, allowing secure access to the browser-based management GUI in the switch

enrollment and renewal

Convergence

• Secure FTP

allows secure file transfer to and from the switch; protects against unwanted file downloads or unauthorized copying of a switch configuration file

• Open Authentication Role

simplifies first-time deployment of AAA in brownfield deployments by allowing full network access for failed clients and provides instant connectivity as soon as a client is plugged-in

• Critical Authentication Role

ensures that important infrastructure devices such as IP phones are allowed network access even in the absence of a RADIUS server

• MAC Pinning

allows non-chatty legacy devices to stay authenticated by pinning client MAC addresses to the port until the clients logoff or get disconnected

• Management Interface Wizard

helps secure management interfaces such as SNMP, telnet, SSH, SSL, Web, and USB at the desired level

• Switch management logon security

helps secure switch CLI logon by optionally requiring either RADIUS or TACACS+ authentication

• Security banner

displays a customized security policy when users log in to the switch

• IEEE 802.1AE MACsec

provides security on a link between two switch ports (1Gbps or 10Gbps) using standard encryption and authentication based on pre-shared key. MACsec software support not yet available for modules with Smart Rate ports (requires v3 modules)

• Enrollment over Secure Transport (EST)

enhances the switch PKI infrastructure with a simpler, scalable and more secure method of certificate provisioning, re-

• IP multicast routing

• IP multicast snooping (data-driven IGMP)

• Protocol Independent Multicast for IPv6

• LLDP-MED (Media Endpoint Discovery)

• PoE allocations

• Auto VLAN configuration for voice

• Local MAC Authentication

includes PIM Sparse and Dense modes to route IP multicast traffic

automatically prevents flooding of IP multicast traffic

supports one-to-many and many-to-many media casting use cases such as IPTV over IPv6 networks

defines a standard extension of LLDP that stores values for parameters such as QoS and VLAN to configure automatically network devices such as IP phones

support multiple methods (automatic, IEEE 802.3af class, LLDP-MED, or user specified) to allocate PoE power for more efficient energy savings

– RADIUS VLAN: uses a standard RADIUS attribute and LLDP-MED to automatically configure a VLAN for IP

phones

– CDPv2: uses CDPv2 to configure legacy IP phones

assigns attributes such as VLAN and QoS using locally configured profile that can be a list of MAC prefixes

Page

QuickSpecs

Aruba 5400R zl2 Switch Series

Standard Features

Warranty, Services and Support

• Limited Lifetime Warranty

See https://www.arubanetworks.com/support-services/ product-warranties/

included with your product purchase

• For Software Releases and Documentation, refer to https://asp.arubanetworks.com/downloads

• For support and services information, visit https://www.arubanetworks.com/support-services/arubacare/

for warranty and support information

Page

QuickSpecs

Aruba 5400R zl2 Switch Series

Configuration

Information

Build To Order:

BTO is a standalone unit with no integration. BTO products ship standalone are not part of a CTO or Rack-Shippable solution.

BTO Models

Rule #

Description

SKU

Aruba 5406R zl2 Switch

J9821A

•

• 4U - Height

1, 2

Aruba 5406R 8-port 1/2.5/5/10GBASE-T PoE+ / 8-port SFP+ (No PSU) v3 zl2 Switch

JL002A

•

max=8

• 4U - Height

1, 2

Aruba 5406R 16-port SFP+ (No PSU) v3 zl2 Switch

JL095A

•

max=16

• 4U - Height

1, 2

Aruba 5406R 44GT PoE+ and 4-port SFP+ (No PSU) v3 zl2 Switch

JL003A

•

port 1G/10GbE SFP+ MACsec v3

• 4U - Height

Aruba 5412R zl2 Switch

J9822A

•

• 7U - Height

1 Power Supply required

• 1 Fan Tray Included

• 1 Management module included

• 1 RJ-45 out-of-band management port

1 Power Supply required

• 8 RJ-45 10GbE PoE+ ports

• 1 - J9995A Aruba 8-port 1/2.5/5/10GBASE-T PoE+ MACsec v3 zl2 Module included

• 1 - J9993A Aruba 8-port 1G/10GbE SFP+ MACsec v3 zl2 Module included (min=0 \

SFP+ Transceivers)

• 1 Fan Tray Included

• 1 Management module included

• 1 RJ-45 out-of-band management port

1 Power Supply required

• 2 - J9993A Aruba 8-port 1G/10GbE SFP+ MACsec v3 zl2 Module included (min=0 \

SFP+ Transceivers)

• 1 Fan Tray Included

• 1 Management module included

• 1 RJ-45 out-of-band management port

1 Power Supply required

• 1 - J9990A Aruba 20-port 10/100/1000BASE-T PoE+ / 4-

zl2 Module included (min=0 \ max=4 SFP Transceivers)

• 1 - J9986A Aruba 24-port 10/100/1000BASE-T PoE+ MACsec v3 zl2 Module included

• 1 Fan Tray Included

• 1 Management module included

• 1 RJ-45 out-of-band management port

2 Power Supplies required

• 1 Fan Tray Included

• 1 Management module included

• 1 RJ-45 out-of-band management port

Page

QuickSpecs

Aruba 5400R zl2 Switch Series

Configuration

Information

1, 2

Aruba 5412R 92GT PoE+ and 4-port SFP+ (No PSU) v3 zl2 Switch

JL001A

•

• 7U - Height

Configuration Rules

Rule #

Description

SKU

The following Transceivers install into this Chassis :

Aruba 1G SFP LC SX 500m OM2 MMF Transceiver

J4858D

Aruba 1G SFP LC LX 10km SMF Transceiver

J4859D

Aruba 1G SFP LC LH 70km SMF Transceiver

J4860D

Aruba 1G SFP RJ45 T 100m Cat5e Transceiver

J8177D

Aruba 100M SFP LC FX 2km MMF Transceiver

J9054D

Aruba 10G SFP+ LC SR 300m OM3 MMF Transceiver

J9150D

Aruba 10G SFP+ LC LRM 220m OM2 MMF Transceiver

J9152D

Aruba 10G SFP+ LC ER 40km SMF Transceiver

J9153D

Aruba 10G SFP+ to SFP+ 1m Direct Attach Copper Cable

J9281D

Aruba 10G SFP+ to SFP+ 3m Direct Attach Copper Cable

J9283D

Aruba 10G SFP+ to SFP+ 7m Direct Attach Copper Cable

J9285D

The following Transceivers install into this Chassis:

Aruba 1G SFP LC SX 500m MMF TAA Transceiver

JL745A

Aruba 1G SFP LC LX 10km SMF TAA Transceiver

JL746A

Aruba 1G SFP RJ45 T 100m Cat5e TAA Transceiver

JL747A

Aruba 10G SFP+ LC SR 300m MMF TAA Transceiver

JL748A

Aruba 10G SFP+ LC LR 10km SMF TAA Transceiver

JL749A

2 Power Supplies required

• 1 - J9990A Aruba 20-port 10/100/1000BASE-T PoE+ / 4-port 1G/10GbE SFP+ MACsec

v3 zl2 Module included (min=0 \ max=4 SFP Transceivers)

• 3 - J9986A Aruba 24-port 10/100/1000BASE-T PoE+ MACsec v3 zl2 Modules included

• 1 Fan Tray Included

• 1 Management module included

• 1 RJ-45 out-of-band management port

Page

QuickSpecs

Aruba 5400R zl2 Switch Series

Configuration

Information

Rack Level Integration CTO Models

Rule #

Description

SKU

Aruba 5406R zl2 Switch

J9821A

•

• 4U - Height

1, 2, 11

Aruba 5406R 8-port 1/2.5/5/10GBASE-T PoE+ / 8-port SFP+ (No PSU) v3 zl2 Switch

JL002A

•

max=8

• 4U - Height

1, 2, 11

Aruba 5406R 16-port SFP+ (No PSU) v3 zl2 Switch

JL095A

•

max=16

• 4U - Height

1, 2, 11

Aruba 5406R 44GT PoE+ and 4-port SFP+ (No PSU) v3 zl2 Switch

JL003A

•

port 1G/10GbE SFP+ MACsec v3

• 4U - Height

Aruba 5412R zl2 Switch

J9822A

•

• 7U - Height

1 Power Supply required

• 1 Fan Tray Included

• 1 Management module included

• 1 RJ-45 out-of-band management port

1 Power Supply required

• 8 RJ-45 10GbE PoE+ ports

• 1 - J9995A Aruba 8-port 1/2.5/5/10GBASE-T PoE+ MACsec v3 zl2 Module included

• 1 - J9993A Aruba 8-port 1G/10GbE SFP+ MACsec v3 zl2 Module included (min=0 \

SFP+ Transceivers)

• 1 Fan Tray Included

• 1 Management module included

• 1 RJ-45 out-of-band management port

1 Power Supply required

• 2 - J9993A Aruba 8-port 1G/10GbE SFP+ MACsec v3 zl2 Module included (min=0 \

SFP+ Transceivers)

• 1 Fan Tray Included

• 1 Management module included

• 1 RJ-45 out-of-band management port

1 Power Supply required

• 1 - J9990A Aruba 20-port 10/100/1000BASE-T PoE+ / 4-

zl2 Module included (min=0 \ max=4 SFP Transceivers)

• 1 - J9986A Aruba 24-port 10/100/1000BASE-T PoE+ MACsec v3 zl2 Module included

• 1 Fan Tray Included

• 1 Management module included

• 1 RJ-45 out-of-band management port

2 Power Supplies required

• 1 Fan Tray Included

• 1 Management module included

• 1 RJ-45 out-of-band management port

Page

QuickSpecs

Aruba 5400R zl2 Switch Series

Configuration

Information

1, 2, 11

Aruba 5412R 92GT PoE+ and 4-port SFP+ (No PSU) v3 zl2 Switch

JL001A

•

• 7U - Height

Configuration Rules

Rule #

Description

SKU

The following Transceivers install into this Chassis :

Aruba 1G SFP LC SX 500m OM2 MMF Transceiver

J4858D

Aruba 1G SFP LC LX 10km SMF Transceiver

J4859D

Aruba 1G SFP LC LH 70km SMF Transceiver

J4860D

Aruba 1G SFP RJ45 T 100m Cat5e Transceiver

J8177D

Aruba 100M SFP LC FX 2km MMF Transceiver

J9054D

Aruba 10G SFP+ LC SR 300m OM3 MMF Transceiver

J9150D

Aruba 10G SFP+ LC LRM 220m OM2 MMF Transceiver

J9152D

Aruba 10G SFP+ LC ER 40km SMF Transceiver

J9153D

Aruba 10G SFP+ to SFP+ 1m Direct Attach Copper Cable

J9281D

Aruba 10G SFP+ to SFP+ 3m Direct Attach Copper Cable

J9283D

Aruba 10G SFP+ to SFP+ 7m Direct Attach Copper Cable

J9285D

Aruba 10G SFP+ LC LR 10km SMF Transceiver

J9151E

The following Transceivers install into this Chassis:

Aruba 1G SFP LC SX 500m MMF TAA Transceiver

JL745A

Aruba 1G SFP LC LX 10km SMF TAA Transceiver

JL746A

Aruba 1G SFP RJ45 T 100m Cat5e TAA Transceiver

JL747A

Aruba 10G SFP+ LC SR 300m MMF TAA Transceiver

JL748A

Aruba 10G SFP+ LC LR 10km SMF TAA Transceiver

JL749A

If the CTO Switch Chassis needs to be racked, Then the CTO Base Model needs to integrate (with 0D1) to the HPE Rack.

2 Power Supplies required

• 1 - J9990A Aruba 20-port 10/100/1000BASE-T PoE+ / 4-port 1G/10GbE SFP+ MACsec

v3 zl2 Module included (min=0 \ max=4 SFP Transceivers)

• 3 - J9986A Aruba 24-port 10/100/1000BASE-T PoE+ MACsec v3 zl2 Modules included

• 1 Fan Tray Included

• 1 Management module included

• 1 RJ-45 out-of-band management port

Page

QuickSpecs

Aruba 5400R zl2 Switch Series

Configuration

Information

Enter the following menu selections as integrated to the CTO Model X server above if order is factory built.

Modules

Rule #

Description

SKU

Management Modules

(J9821A, JL002A, JL095A, JL003A, J9822A, JL001A) System (std 1 // max 2) User Selection (min 0 / max 1)

Aruba 5400R zl2 Management Module

J9827A

• No Transceivers

I/O Modules

J9821A only - System (std 0 // max=6) User Selection (min 0 / max=6) per Chassis

J9822A only - System (std 0 // max=12) User Selection (min 0 / max=12) per Chassis

JL002A, JL095A, JL003A only - System (std 2 // max=6) User Selection (min 0 / max=4) per Chassis

JL001A only - System (std 4 // max=12) User Selection (min 0 / max=8) per Chassis

Aruba 20-port 10/100/1000BASE-T PoE+ / 4-port 1/2.5/5/10GBASE-T PoE+ MACsec v3 zl2 Module

J9991A

• No Transceivers

Aruba 20

J9992A

• min=0 \ max=1 QSFP+ Transceiver

1, 2

Aruba 24-port 1GbE SFP MACsec v3 zl2 Module

J9988A

• min=0 \ max=24 SFP Transceivers

1, 2

Aruba 12-port 10/100/1000BASE-T PoE+ / 12-port 1GbE SFP MACsec v3 zl2 Module

J9989A

• min=0 \ max=12 SFP Transceivers

2, 3, 5

Aruba 8-port 1G/10GbE SFP+ MACsec v3 zl2 Module

J9993A

• min=0 \ max=8 SFP/SFP+ Transceivers

2, 3, 5

Aruba 20-port 10/100/1000BASE-T PoE+ / 4-port 1G/10GbE SFP+ MACsec v3 zl2 Module

J9990A

•

Aruba 8-port 1/2.5/5/10GBASE-T PoE+ MACsec v3 zl2 Module

J9995A

• No Transceivers

Aruba 24-port 10/100/1000BASE-T PoE+ MACsec v3 zl2 Module

J9986A

• No Transceivers

Aruba 24-port 10/100/1000BASE-T MACsec v3 zl2 Module

J9987A

• No Transceivers

Aruba 2-port 40GbE QSFP+ v3 zl2 Module

J9996A

• min=0 \ max=2 QSFP+ Transceivers

-port 10/100/1000BASE-T PoE+ MACsec / 1-port 40GbE QSFP+ v3 zl2 Module

min=0 \ max=8 SFP/SFP+ Transceivers

Page

QuickSpecs

Aruba 5400R zl2 Switch Series

Configuration

Information

Configuration Rules

Rule #

Description

SKU

The following Transceivers install into this Module: (Use #0D1 if switch is CTO) - if applicable

Aruba 1G SFP LC SX 500m OM2 MMF Transceiver

J4858D

Aruba 1G SFP LC LX 10km SMF Transceiver

J4859D

Aruba 1G SFP LC LH 70km SMF Transceiver

J4860D

Aruba 1G SFP RJ45 T 100m Cat5e Transceiver

J8177D

Aruba 100M SFP LC FX 2km MMF Transceiver

J9054D

The following Transceivers install into this Chassis : (Use 0D1 if switch is CTO) - if applicable

Aruba 1G SFP LC SX 500m MMF TAA Transceiver

JL745A

Aruba 1G SFP LC LX 10km SMF TAA Transceiver

JL746A

Aruba 1G SFP RJ45 T 100m Cat5e TAA Transceiver

JL747A

The following Transceivers install into this Chassis : (Use 0D1 if switch is CTO) - if applicable

Aruba 10G SFP+ LC SR 300m MMF TAA Transceiver

JL748A

Aruba 10G SFP+ LC LR 10km SMF TAA Transceiver

JL749A

The following Transceivers install into this Module: (Use #0D1 or #B01 if switch is CTO) - if applicable

Aruba 1G SFP LC SX 500m OM2 MMF Transceiver

J4858D

Aruba 1G SFP LC LX 10km SMF Transceiver

J4859D

Aruba 1G SFP LC LH 70km SMF Transceiver

J4860D

Aruba 1G SFP RJ45 T 100m Cat5e Transceiver

J8177D

Aruba 100M SFP LC FX 2km MMF Transceiver

J9054D

Aruba 10G SFP+ LC SR 300m OM3 MMF Transceiver

J9150D

Aruba 10G SFP+ LC LRM 220m OM2 MMF Transceiver

J9152D

Aruba 10G SFP+ LC ER 40km SMF Transceiver

J9153D

Aruba 10G SFP+ to SFP+ 1m Direct Attach Copper Cable

J9281D

Aruba 10G SFP+ to SFP+ 3m Direct Attach Copper Cable

J9283D

Aruba 10G SFP+

J9285D

The following Transceivers install into this Module: (Use #0D1 or #B01 if switch is CTO) - if applicable

HPE X142 40G QSFP+ MPO SR4 Transceiver

JH231A

HPE X142 40G QSFP+ LC LR4 SM Transceiver

JH232A

HPE X142 40G QSFP+ MPO eSR4 300M Transceiver

JH233A

Aruba 40G QSFP+ LC Bidirectional 150m MMF 2-strand Transceiver

JL308A

HPE X242 40G QSFP+ to QSFP+ 1m Direct Attach Copper Cable

JH234A

HPE X242 40G QSFP+ to QSFP+ 3m Direct Attach Copper Cable

JH235A

HPE X242 40G QSFP+ to QSFP+ 5m Direct Attach Copper Cable

JH236A

to SFP+ 7m Direct Attach Copper Cable

Page

QuickSpecs

Aruba 5400R zl2 Switch Series

Configuration

Information

Transceivers

Rule #

Description

SKU

SFP Transceivers

Aruba 100M SFP LC FX 2km MMF Transceiver

J9054D

Aruba 1G SFP LC SX 500m OM2 MMF Transceiver

J4858D

Aruba 1G SFP LC LX 10km SMF Transceiver

J4859D

Aruba 1G SFP LC LH 70km SMF Transceiver

J4860D

Aruba 1G SFP RJ45 T 100m Cat5e Transceiver

J8177D

Aruba 1G SFP LC SX 500m MMF TAA Transceiver

JL745A

Aruba 1G SFP LC LX 10km SMF TAA Transceiver

JL746A

Aruba 1G SFP RJ45 T 100m Cat5e TAA Transceiver

JL747A

SFP+ Transceivers

Aruba 10G SFP+ LC SR 300m OM3 MMF Transceiver

J9150D

Aruba 10G SFP+ LC LRM 220m OM2 MMF Transceiver

J9152D

Aruba 10G SFP+ LC ER 40km SMF Transceiver

J9153D

Aruba 10G SFP+ LC SR 300m MMF TAA Transceiver

JL748A

Aruba 10G SFP+ LC LR 10km SMF TAA Transceiver

JL749A

Aruba 10G SFP+ to SFP+ 1m Direct Attach Copper Cable

J9281D

Aruba 10G SFP+ to SFP+ 3m Direct Attach Copper Cable

J9283D

Aruba 10G SFP+ to SFP+ 7m Direct Attach Copper Cable

J9285D

QSFP+ Transceivers

HPE X142 40G QSFP+ MPO SR4 Transceiver

JH231A

HPE X142 40G QSFP+ LC LR4 SM Transceiver

JH232A

HPE X142 40G QSFP+ MPO eSR4 300M Transceiver

JH233A

Aruba 40G QSFP+ LC Bidirectional 150m MMF 2-strand Transceiver

JL308A

HPE X242 40G QSFP+ to QSFP+ 1m Direct Attach Copper Cable

JH234A

HPE X242 40G QSFP+ to QSFP+ 3m Direct Attach Copper Cable

JH235A

HPE X242 40G QSFP+ to QSFP+ 5m Direct Attach Copper Cable

JH236A

Page

QuickSpecs

Aruba 5400R zl2 Switch Series

Configuration

Information

Internal Power Supplies

(J9821A, JL002A, JL095A, JL003A) System (std 0 // max 2) User Selection (min 1 / max 2)

(J9822A, JL001A) System (std 0 // max 4) User Selection (min 2 / max 4)

2, 4, 6, 7

Aruba 5400R 700W PoE+ zl2 Power Supply

J9828A

•

Aruba 5400R 700W PoE+ zl2 Power Supply PDU NA, JP or TW

J9828A#B2B

•

Aruba 5400R 700W PoE+ zl2 Power Supply PDU ROW

J9828A#B2C

• HPE 2.5M C15 to C14 ROW Power Cord (J9944A)

Aruba 5400R 700W PoE+ zl2 Power Supply United States 220 volt

J9828A#B2E

• HPE 2.5m C15 to NEMA 6-20P 250V Non-locking Power Cord (JL336A)

Aruba 5400R 700W PoE+ zl2 Power Supply

J9828A#AC3

• No Localized Power Cord Selected

2, 4, 6, 7

Aruba 5400R 1100W PoE+ zl2 Power Supply

J9829A

• includes 1 x c15, 1100w

Aruba 5400R 1100W PoE+ zl2 Power Supply PDU NA, JP or TW

J9829A#B2B

• HPE 2.5M C15 to C14 N.A. Power Cord(J9943A)

Aruba 5400R 1100W PoE+ zl2 Power Supply PDU ROW

J9829A#B2C

• HPE 2.5M C15 to C14 ROW Power Cord (J9944A)

Aruba 5400R 1100W PoE+ zl2 Power Supply United States 220 volt

J9829A#B2E

• HPE 2.5m C15 to NEMA 6-20P 250V Non-locking Power Cord (JL336A)

Aruba 5400R 1100W PoE+ zl2 Power Supply

J9829A#AC3

• No Localized Power Cord Selected

2, 4, 6, 7

Aruba 5400R

J9830B

• includes 2 x c19, 2750w

Aruba 5400R 2750W PoE+ zl2 Power Supply PDU NA, JP or TW

J9830B#B2B

• HPE 2.5m C19 to C20 250V PDU Power Cord (JL342A)

Aruba 5400R 2750W PoE+ zl2 Power Supply PDU ROW

J9830B#B2C

• HPE 2.5m C19 to C20 250V PDU Power Cord (JL342A)

Aruba 5400R 2750W PoE+ zl2 Power Supply United States 220 volt

J9830B#B2E

• HPE 2.5m C19 to NEMA 6-20P 250V 20Amp Non-locking Power Cord(JL351A)

Aruba 5400R 2750W PoE+ zl2 Power Supply

J9830B#AC3

• No Localized Power Cord Selected

Configuration Rules

Rule #

Description

SKU

Localization required on orders without #B2B, #B2C or #B2E options.

This power supply is ONLY supported on the following switches.

Aruba 5406R zl2 Switch

J9821A

Aruba 5406R 8-port 1/2.5/5/10GBASE-T PoE+ / 8-port SFP+ (No PSU) v3 zl2 Switch

JL002A

Aruba 5406R 16-port SFP+ (No PSU) v3 zl2 Switch

JL095A

Aruba 5406R 44GT PoE+ and 4-port SFP+ (No PSU) v3 zl2 Switch

JL003A

Aruba 5412R zl2 Switch

J9822A

Aruba 5412R 92GT PoE+ and 4-port SFP+ (No PSU) v3 zl2 Switch

JL001A

If #B2E is selected Then replace Localized option with #B2E for power supply and with #B2E for switch. (Offered only in NA, Mexico, Taiwan, and Japan)

Power Supplies can be mixed for a switch enclosure

includes 1 x c13, 700w

HPE 2.5M C15 to C14 N.A. Power Cord(J9943A)

2750W PoE+ zl2 Power Supply

Page

QuickSpecs

Aruba 5400R zl2 Switch Series

Configuration

Information

NOTE:

For J9828A, J9829A, J9830A/B: Power Supplies can be mixed for a switch enclosure. However, the three different power supplies each require different power cords, and the wall plug that is needed for J9830A is different from the wal Moreover, full redundancy and N+1 redundancy are only supported with like power supplies. Drop down under power supply should offer the following options and results: Switch/Router/Power Supply to PDU Power Cord Japan or B2C ROW. (Watson Default B2B or B2C for Rack Level CTO) Switch/Router/Power Supply to Wall Power Cord Box Level CTO) High Volt Switch/Router/Power Supply America, Mexico, Taiwan, and Japan) No Localized Power Cord Selected - AC3 Option

Cables

Rule #

Description

SKU

Console Cables

(std 0 // max 99) User Selection (min 0 // max 99) per switch

Aruba X2C2 RJ45 to DB9 Console Cable

JL448A

Multi-Mode Cables

(std 0 // max 99) User Selection (min 0 // max 99) per switch

HPE LC to LC Multi-mode OM3 2-Fiber 0.5m 1-Pack Fiber Optic Cable

AJ833A

HPE LC to LC Multi-mode OM3 2-Fiber 1.0m 1-Pack Fiber Optic Cable

AJ834A

HPE LC to LC Multi-mode OM3 2-Fiber 2.0m 1-Pack Fiber Optic Cable

AJ835A

HPE LC to LC Multi-mode OM3 2-Fiber 5.0m 1-Pack Fiber Optic Cable

AJ836A

HPE LC to LC Multi-mode OM3 2-Fiber 15.0m 1-Pack Fiber Optic Cable

AJ837A

HPE LC to LC Multi-mode OM3 2-Fiber 30.0m 1-Pack Fiber Optic Cable

AJ838A

HPE LC to LC Multi-mode OM3 2-Fiber 50.0m 1-Pack Fiber Optic Cable

AJ839A

HPE Premier Flex LC/LC Multi-mode OM4 2 fiber 1m Cable

QK732A

HPE Premier Flex LC/LC Multi-mode OM4 2 fiber 2m Cable

QK733A

HPE Premier Flex LC/LC Multi-mode OM4 2 fiber 5m Cable

QK734A

HPE Premier Flex LC/LC Multi-mode OM4 2 fiber 15m Cable

QK735A

HPE Premier Flex LC/LC Multi-mode OM4 2 fiber 30m Cable

QK736A

HPE Premier Flex LC/LC Multi-mode OM4 2 fiber 50m Cable

QK737A

Switch Enclosure Options

Rule #

Description

SKU

Fan Trays

Aruba 5406R zl2 Switch Fan Tray

J9831A

• Spare Only

Aruba 5412R zl2 Switch Fan Tray

J9832A

•

Mounting Kit

1, 2

HPE X450 4U/7U Universal 4-post Rackmount Kit

J9852A

Configuration Rules:

If this Mounting Kit is ordered with #0D1 then it integrates to the HPE Universal Rack. (not the switch)

If switches J9821A, JL002A, JL095A, JL003A, J9822A and JL001A are installed into a rack, Then this Rack Mounting kit is required.

l plug that is needed for J9828A and J9829A.

- B2B in North America, Mexico, Taiwan, and

- Localized Option (Watson Default for BTO and

to Wall Power Cord - B2E Option. (Offered only in North

Spare Only

Page

QuickSpecs

Aruba 5400R zl2 Switch Series

Related Options

Accessories

Remarks

Description

SKU

Modules

Aruba 5400R zl2 Management Module

J9827A

Aruba 24-port 10/100/1000BASE-T PoE+ MACsec v3 zl2 Module

J9986A

Aruba 24-port 10/100/1000BASE-T MACsec v3 zl2 Module

J9987A

Aruba 24-port 1GbE SFP MACsec v3 zl2 Module

J9988A

Aruba 12-port 10/100/1000BASE-T PoE+ / 12-port 1GbE SFP MACsec v3 zl2 Module

J9989A

Aruba 20-port 10/100/1000BASE-T PoE+ / 4-port 1G/10GbE SFP+ MACsec v3 zl2 Module

J9990A

Aruba 20-port 10/100/1000BASE-T PoE+ / 4-port 1/2.5/5/10GBASE-T PoE+ MACsec v3 zl2 Module

Aruba 20-port 10/100/1000BASE-T PoE+ MACsec / 1-port 40GbE QSFP+ v3 zl2 Module

J9992A

Aruba 8-port 1G/10GbE SFP+ MACsec v3 zl2 Module

J9993A

Aruba 8-port 1/2.5/5/10GBASE-T PoE+ MACsec v3 zl2 Module

J9995A

Aruba 2-port 40GbE QSFP+ v3 zl2 Module

J9996A

Transceivers

Aruba 100M SFP LC FX 2km MMF Transceiver

J9054D

Aruba 1G SFP RJ45 T 100m Cat5e Transceiver

J8177D

Aruba 1G SFP LC SX 500m OM2 MMF Transceiver

J4858D

Aruba 1G SFP LC LX 10km SMF Transceiver

J4859D

Aruba 1G SFP LC LH 70km SMF Transceiver

J4860D

Aruba 10G SFP+ LC SR 300m OM3 MMF Transceiver

J9150D

Aruba 10G SFP+ LC LR 10km SMF Transceiver

J9151E

Aruba 10G SFP+ LC LRM 220m OM2 MMF Transceiver

J9152D

Aruba 10G SFP+ LC ER 40km SMF Transceiver

J9153D

Aruba 10G SFP+ to SFP+ 1m Direct Attach Copper Cable

J9281D

Aruba 10G SFP+ to SFP+ 3m Direct Attach Copper Cable

J9283D

Aruba 10G SFP+ to SFP+ 7m Direct Attach Copper Cable

J9285D

Aruba 40G QSFP+ LC Bidirectional 150m MMF 2-strand Transceiver

JL308A

HPE X142 40G QSFP+ MPO SR4 Transceiver

JH231A

HPE X142 40G QSFP+ LC LR4 SM Transceiver

JH232A

HPE X142 40G QSFP+ MPO eSR4 300M Transceiver

JH233A

HPE X242 40G QSFP+ to QSFP+ 1m Direct Attach Copper Cable

JH234A

HPE X242 40G QSFP+ to QSFP+ 3m Direct Attach Copper Cable

JH235A

HPE X242 40G QSFP+ to QSFP+ 5m Direct Attach Copper Cable

JH236A

Power Supply

Aruba 5400R 700W PoE+ zl2 Power Supply

J9828A

Aruba 5400R 1100W PoE+ zl2 Power Supply

J9829A

Aruba 5400R 2750W PoE+ zl2 Power Supply

J9830B

J9991A

Page

QuickSpecs

Aruba 5400R zl2 Switch Series

Related Options

Cables

Aruba X2C2 RJ45 to DB9 Console Cable

JL448A

HPE LC to LC Multi-mode OM3 2-Fiber 0.5m 1-Pack Fiber Optic Cable

AJ833A

HPE LC to LC Multi-mode OM3 2-Fiber 1.0m 1-Pack Fiber Optic Cable

AJ834A

HPE LC to LC Multi-mode OM3 2-Fiber 2.0m 1-Pack Fiber Optic Cable

AJ835A

HPE LC to LC Multi-mode OM3 2-Fiber 5.0m 1-Pack Fiber Optic Cable

AJ836A

HPE LC to LC Multi-mode OM3 2-Fiber 15.0m 1-Pack Fiber Optic Cable

AJ837A

HPE LC to LC Multi-mode OM3 2-Fiber 30.0m 1-Pack Fiber Optic Cable

AJ838A

HPE LC to LC Multi-mode OM3 2-Fiber 50.0m 1-Pack Fiber Optic Cable

AJ839A

HPE Premier Flex LC/LC Multi-mode OM4 2 fiber 1m Cable

QK732A

HPE Premier Flex LC/LC Multi-mode OM4 2 fiber 2m Cable

QK733A

HPE Premier Flex LC/LC Multi-mode OM4 2 fiber 5m Cable

QK734A

HPE Premier Flex LC/LC Multi-mode OM4 2 fiber 15m Cable

QK735A

HPE Premier Flex LC/LC Multi-mode OM4 2 fiber 30m Cable

QK736A

HPE Premier Flex LC/LC Multi-mode OM4 2 fiber 50m Cable

QK737A

Mounting Kit

HPE X450 4U/7U Universal 4-post Rackmount Kit

J9852A

Aruba 5406R zl2 Switch (J9821A)

Aruba 5406R zl2 Switch Fan Tray

J9831A

Aruba 5412R zl2 Switch (J9822A)

Aruba 5412R zl2 Switch Fan Tray

J9832A

HPE 5406R-44G-PoE+/2SFP+ (No PSU) v2 zl2 Switch (J9823A)

Aruba 5406R zl2 Switch Fan Tray

J9831A

HPE 5412R-92G-PoE+/2SFP+ (No PSU) v2 zl2 Switch (J9825A)

Aruba 5412R zl2 Switch Fan Tray

J9832A

HPE 5406R-44G-PoE+/4SFP (No PSU) v2 zl2 Switch (J9824A)

Aruba 5406R zl2 Switch Fan Tray

J9831A

HPE 5412R-92G-PoE+/4SFP (No PSU) v2 zl2 Switch (J9826A)

Aruba 5412R zl2 Switch Fan Tray

J9832A

HPE 5406R-8XGT/8SFP+ (No PSU) v2 zl2 Switch (J9868A)

Aruba 5406R zl2 Switch Fan Tray

J9831A

Aruba 5412R 92GT PoE+ and 4-port SFP+ (No PSU) v3 zl2 Switch (JL001A)

Aruba 5412R zl2 Switch Fan Tray

J9832A

Aruba 5406R 8-port 1/2.5/5/10GBASE-T PoE+ / 8-port SFP+ (No PSU) v3 zl2 Switch (JL002A)

Aruba 5406R zl2 Switch Fan Tray

J9831A

Aruba 5406R 44GT PoE+ and 4-port SFP+ (No PSU) v3 zl2 Switch (JL003A)

Aruba 5406R zl2 Switch Fan Tray

J9831A

Aruba 5406R 16-port SFP+ (No PSU) v3 zl2 Switch (JL095A)

Aruba 5406R zl2 Switch Fan Tray

J9831A

Page

QuickSpecs

Aruba 5400R zl2 Switch Series

Technical Specifications

Aruba 5406R zl2 Switch (J9821A)

Included accessories

1 Aruba 5400R zl2 Management Module (J9827A) 1 Aruba 5406R zl2 Switch Fan Tray (J9831A)

I/O ports and slots

6 open module slots Supports a maximum of 144 autosensing 10/100/1000 ports or 144 SFP ports or 48 SFP+ ports or 48 HPE Smart Rate Multi-Gigabit or 12 40GbE ports, or a combination

Power supplies

2 power supply slots 1 minimum power supply required (ordered separately)

Fan tray

includes: 1 x J9831A 1 fan tray slot

Physical characteristics

Dimensions

17.5(w) x 17.75(d) x 6.9(h) in (44.45 x 45.09 x 17.53 cm) (4U height)

Weight

24.5 lb (11.11 kg)

Memory and processor

v3 Gigabit module

Dual ARM Coretex A9 @ 1 GHz; Packet buffer size: 13.5 MB Internal

v2 Gigabit module

ARM11 @ 450 MHz; Packet buffer size: 18 MB internal

v3 10G module

Dual ARM Coretex A9 @ 1 GHz; Packet buffer size: 13.5 MB Internal

v2 10G module

ARM11 @ 550 MHz; Packet buffer size: 18 MB internal

v3 40G module

Dual ARM Coretex A9 @ 1 GHz; Packet buffer size: 13.5 MB Internal

Management Module

Freescale P2020 dual core @ 1.2 GHz, 16 MB flash, 1 GB SD Card, 4 GB DDR3 SODIMM

Mounting and enclosure

Mounts in an EIA standard 19-inch telco rack or equipment cabinet (hardware included); horizontal

Performance

1000 Mb Latency

< 2.8 µs (FIFO 64-byte packets)

10 Gbps Latency

< 1.8 µs (FIFO 64-byte packets)

40 Gbps Latency

< 1.5 μ

Throughput

up to 571.4 Mpps

Routing/Switching capacity

960 Gbps

Switch fabric speed

1015 Gbps

Routing table size

10000 entries (IPv4), 5000 entries (IPv6)

MAC address table size

64000 entries

Environment

Operating temperature

32°F to 113°F (0°C to 45°C); 0°C to 40°C with J8177C transceiver installed, 0°C to 35°C with FIPS Opacity Shield installed

Operating relative humidity

15% to 95% @ 113°F (45°C), noncondensing

Non-operating/Storage temperature

-40°F to 158°F (-40°C to 70°C)

Non-operating/Storage relative humidity

15% to 95% @ 149°F (65°C), noncondensing

Altitude

up to 10,000 ft (3 km)

Acoustic

Power: 44 dB, Pressure: 31.7 dB ISO 7779, ISO 9296

IPv6 Ready Certified

surface mounting only

s (FIFO 64-byte packets)

Page

QuickSpecs

Aruba 5400R zl2 Switch Series

Technical Specifications

Electrical characteristics

Frequency

50/60 Hz

80plus.org Certification

Gold

Description

Does not come with power supply. Two power supply slots are available; three different power supplies are available. See power supply products for additional specifications.

Maximum heat dissipation

2450 BTU/hr (2584.75 kJ/hr), (max. non-PoE); 3700 BTU/hr (3903 kJ/hr) (max. using PoE)

Voltage

100 - 127 / 200 - 240 VAC, rated

NOTE:

Heat dissipation does not include heat dissipated by the PoE-powered devices themselves.

Safety

CSA 22.2 No. 60950; UL 60950; IEC 60950; EN 60950

Emissions

FCC part 15 Class A; EN 55022/CISPR 22 Class A

Immunity

EN 55024, CISPR 24

ESD

IEC 61000-4-2; 4 kV CD, 8 kV AD; HPE ENV. 765.002

Radiated

IEC 61000-4-3; 3 V/m

EFT/Burst

IEC 61000-4-4; 1.0 kV (power line), 0.5 kV (signal line)

Surge

IEC 61000-4-5; 1 kV/2 kV AC, 1kV signal, 0.5 kV DC

Conducted

IEC 61000-4-6; 3 Vrms

Power frequency magnetic field

IEC 61000-4-8; 1 A/m, 50 or 60 Hz

Voltage dips and interruptions

IEC 61000-4-11; >95% reduction, 0.5 period; 30% reduction, 25 periods Harmonics

EN 61000-3-2, IEC 61000-3-2

Flicker

EN 61000-3-3, IEC 61000-3-3

Management

Aruba AirWave Network Management; IMC – Intelligent Management Center; Command-line interface;

band management (serial RS-232c or micro usb)

NOTE:

Supported 1G SFP transceivers are revision "B" or later (product number ends with the letter "B" or later; for example, J9142B, J8177C).

Services

Refer to the Hewlett Packard Enterprise website at http://www.hpe.com/networking/services for

product numbers. For details about services and response

times in your area, please contact your local Hewlett Packard Enterprise sales office.

Web browser; Configuration menu; Out-of-band management (RJ-45 Ethernet); SNMP manager; Out-of-

details on the service-level descriptions and

Page

QuickSpecs

Aruba 5400R zl2 Switch Series

Technical Specifications

Aruba 5412R zl2 Switch (J9822A)

Included accessories

1 Aruba 5400R zl2 Management Module (J9827A) 1 Aruba 5406R zl2 Switch Fan Tray (J9831A)

I/O ports and slots

12 open module slots Supports a maximum of 288 autosensing 10/100/1000 ports or 288 SFP ports or 96 SFP+ ports or 96 HPE Smart Rate Multi-Gigabit or 24 40GbE ports, or a combination

Power supplies

4 power supply slots 2 minimum power supplies required (ordered separately)

Fan tray

includes: 1 x J9832A 1 fan tray slot

Physical characteristics

Dimensions

17.5(w) x 17.75(d) x 12.1(h) in (44.45 x 45.09 x 30.73 cm) (7U height)

Weight

38.1 lb (17.28 kg)

Memory and processor

v3 Gigabit module

Dual ARM Coretex A9 @ 1 GHz; Packet buffer size: 13.5 MB Internal

v2 Gigabit module

ARM11 @ 450 MHz; Packet buffer size: 18 MB internal

v3 10G module

Dual ARM Coretex A9 @ 1 GHz; Packet buffer size: 13.5 MB Internal

v2 10G module

ARM11 @ 550 MHz; Packet buffer size: 18 MB internal

v3 40G module

Dual ARM Coretex A9 @ 1 GHz; Packet buffer size: 13.5 MB Internal

Management Module

Freescale P2020 dual core @ 1.2 GHz, 16 MB flash, 1 GB SD Card, 4 GB DDR3 SODIMM

Mounting and enclosure

Mounts in an EIA standard 19-inch telco rack or equipment cabinet (hardware included); horizontal

Performance

1000 Mb Latency

< 2.8 µs (FIFO 64-byte packets)

10 Gbps Latency

< 1.8 µs (FIFO 64-byte packets)

40 Gbps Latency

< 1.5 μ

Throughput

up to 1142.8 Mpps

Routing/Switching capacity

1920 Gbps

Switch fabric speed

2030 Gbps

Routing table size

10000 entries (IPv4), 5000 entries (IPv6)

MAC address table size

64000 entries

Environment

Operating temperature

32°F to 113°F (0°C to 45°C); 0°C to 40°C with J8177C transceiver installed, 0°C to 35°C with FIPS Opacity Shield installed

Operating relative humidity

15% to 95% @ 113°F (45°C), noncondensing

Non-operating/Storage temperature

-40°F to 158°F (-40°C to 70°C)

Non-operating/Storage relative humidity

15% to 95% @ 149°F (65°C), noncondensing

Altitude

up to 10,000 ft (3 km)

Acoustic

Power: 49 dB, Pressure: 35.7 dB ISO 7779, ISO 9296

IPv6 Ready Certified

surface mounting only

s (FIFO 64-byte packets)

Page

QuickSpecs

Aruba 5400R zl2 Switch Series

Technical Specifications

Electrical characteristics

Frequency

50/60 Hz

80plus.org Certification

Gold

Description

Does not come with power supply. Four power supply slots are available; three different power supplies are available. See power supply products for additional specifications.

Maximum heat dissipation

4900 BTU/hr (5169.5 kJ/hr), (max. non-PoE); 7400 BTU/hr (7,807 kJ/hr) (max. using PoE)

Voltage

100 - 127 / 200 - 240 VAC, rated

NOTE:

Heat dissipation does not include heat dissipated by the PoE-powered devices themselves. When more than four power cords are installed in a 5412R zl2 switch chassis, additional installation requirements are needed. Refer to the HPE 5400R zl2 Switches Quick Setup Guide and Safety/Regulatory Information manual for details.

Safety

CSA 22.2 No. 60950; UL 60950; IEC 60950; EN 60950

Emissions

FCC part 15 Class A; EN 55022/CISPR 22 Class A

Immunity

EN 55024, CISPR 24

ESD

IEC 61000-4-2; 4 kV CD, 8 kV AD; HPE ENV. 765.002

Radiated

IEC 61000-4-3; 3 V/m

EFT/Burst

IEC 61000-4-4; 1.0 kV (power line), 0.5 kV (signal line)

Surge

IEC 61000-4-5; 1 kV/2 kV AC, 1kV signal, 0.5 kV DC

Conducted

IEC 61000-4-6; 3 Vrms

Power frequency magnetic field

IEC 61000-4-8; 1 A/m, 50 or 60 Hz

Voltage dips and interruptions

IEC 61000-4-11; >95% reduction, 0.5 period; 30% reduction, 25 periods Harmonics

EN 61000-3-2, IEC 61000-3-2

Flicker

EN 61000-3-3, IEC 61000-3-3

Management

Aruba AirWave Network Management; IMC – Intelligent Management Center; Command-line interface;

band management (serial RS-232c or micro usb)

NOTE:

Supported 1G SFP transceivers are revision "B" or later (product number ends with the letter "B" or later; for example, J9142B, J8177C).

Services

Refer to the Hewlett Packard Enterprise website at http://www.hpe.com/networking/services for

numbers. For details about services and response

Web browser; Configuration menu; Out-of-band management (RJ-45 Ethernet); SNMP manager; Out-of

details on the service-level descriptions and product times in your area, please contact your local Hewlett Packard Enterprise sales office.

Page

QuickSpecs

Aruba 5400R zl2 Switch Series

Technical Specifications

HPE 5406R-44G-PoE+/2SFP+ (No PSU) v2 zl2 Switch (J9823A)

Included accessories

1 Aruba 5400R zl2 Management Module (J9827A) 1 Aruba 5406R zl2 Switch Fan Tray (J9831A)

I/O ports and slots

44 RJ-45 autosensing 10/100/1000 PoE+ ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type

Supports a maximum of 144 autosensing 10/100/1000 ports or 144 SFP ports or 48 SFP+ ports or 48 HPE Smart Rate Multi-Gigabit or 12 40GbE ports, or a combination

Power supplies

2 power supply slots 1 minimum power supply required (ordered separately)

Fan tray

includes: 1 x J9831A 1 fan tray slot

Physical characteristics

Dimensions

17.5(w) x 17.75(d) x 6.9(h) in (44.45 x 45.09 x 17.53 cm) (4U height)

Weight

28.11 lb (12.75 kg)

Memory and processor

v3 Gigabit module

Dual ARM Coretex A9 @ 1 GHz; Packet buffer size: 13.5 MB Internal

v2 Gigabit module

ARM11 @ 450 MHz; Packet buffer size: 18 MB internal

v3 10G module

Dual ARM Coretex A9 @ 1 GHz; Packet buffer size: 13.5 MB Internal

v2 10G module

ARM11 @ 550 MHz; Packet buffer size: 18 MB internal

v3 40G module

Dual ARM Coretex A9 @ 1 GHz; Packet buffer size: 13.5 MB Internal

Management Module

Freescale P2020 dual core @ 1.2 GHz, 16 MB flash, 1 GB SD Card, 4 GB DDR3 SODIMM

Mounting and enclosure

Mounts in an EIA standard 19-inch telco rack or equipment cabinet (hardware included); horizontal surface mounting only

Performance

1000 Mb Latency

< 2.8 µs (FIFO 64-byte packets)

10 Gbps Latency

< 1.8 µ

40 Gbps Latency

< 1.5 μs (FIFO 64-byte packets)

Throughput

up to 571.4 Mpps

Routing/Switching capacity

960 Gbps

Switch fabric speed

1015 Gbps

Routing table size

10000 entries (IPv4), 5000 entries (IPv6)

MAC address table size

64000 entries

Environment

Operating temperature

32°F to 113°F (0°C to 45°C); 0°C to 40°C with J8177C transceiver installed, 0°C to 35°C with FIPS Opacity Shield installed

Operating relative humidity

15% to 95% @ 113°F (45°C), noncondensing

Non-operating/Storage temperature

-40°F to 158°F (-40°C to 70°C)

Non-operating/Storage relative humidity

15% to 95% @ 149°F (65°C), noncondensing

Altitude

up to 10,000 ft (3 km)

Acoustic

Power: 44 dB, Pressure: 31.7 dB ISO 7779, ISO 9296

100BASE-TX, IEEE 802.3ab Type 1000BASE-T, IEEE 802.3at PoE+); Media Type: Auto MDIX; Duplex: 10BASE T/100BASE-TX: half or full; 1000BASE-T: full only 2 open 10GbE SFP+ transceiver slots 4 open module slots

IPv6 Ready Certified

s (FIFO 64-byte packets)

Page

QuickSpecs

Aruba 5400R zl2 Switch Series

Technical Specifications

Electrical characteristics

Frequency

50/60 Hz

80plus.org Certification

Gold

Description

Does not come with power supply. Two open power supply slots are available; three different power supplies are available. See power supply products for additional specifications.

Maximum heat dissipation

2450 BTU/hr (2584.75 kJ/hr), (max. non-PoE); 3700 BTU/hr (3903 kJ/hr) (max. using PoE)

Voltage

110 - 127 / 200 - 240 VAC, rated

Idle power

215 W

NOTE:

Idle power is the actual power consumption of the device with no ports connected. Heat dissipation does not include heat dissipated by the PoE-powered devices themselves.

Safety

CSA 22.2 No. 60950; UL 60950; IEC 60950; EN 60950

Emissions

FCC part 15 Class A; EN 55022/CISPR 22 Class A

Immunity

EN 55024, CISPR 24

ESD

IEC 61000-4-2; 4 kV CD, 8 kV AD; HPE ENV. 765.002

Radiated

IEC 61000-4-3; 3 V/m

EFT/Burst

IEC 61000-4-4; 1.0 kV (power line), 0.5 kV (signal line)

Surge

IEC 61000-4-5; 1 kV/2 kV AC, 1kV signal, 0.5 kV DC

Conducted

IEC 61000-4-6; 3 Vrms

Power frequency magnetic field

IEC 61000-4-8; 1 A/m, 50 or 60 Hz

Voltage dips and

IEC 61000-4-11; >95% reduction, 0.5 period; 30% reduction, 25 periods Harmonics

EN 61000-3-2, IEC 61000-3-2

Flicker

EN 61000-3-3, IEC 61000-3-3

Management

Aruba AirWave Network Management; IMC – Intelligent Management Center; Command-line interface;

band management (serial RS-232c or micro usb)

NOTE:

Supported 1G SFP transceivers are revision "B" or later (product number ends with the letter "B" or later; for example, J9142B, J8177C).

Services

Refer to the Hewlett Packard Enterprise website at http://www.hpe.com/networking/services for

level descriptions and product numbers. For details about services and response

times in your area, please contact your local Hewlett Packard Enterprise sales office.

interruptions

Web browser; Configuration menu; Out-of-band management (RJ-45 Ethernet); SNMP manager; Out-of

details on the service-

Page

QuickSpecs

Aruba 5400R zl2 Switch Series

Technical Specifications

HPE 5412R-92G-PoE+/2SFP+ (No PSU) v2 zl2 Switch (J9825A)

Included accessories

1 Aruba 5400R zl2 Management Module (J9827A) 1 Aruba 5412R zl2 Switch Fan Tray (J9832A)

I/O ports and slots

92 RJ-45 autosensing 10/100/1000 PoE+ ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type

MDIX; Duplex:

Supports a maximum of 288 autosensing 10/100/1000 ports or 288 SFP ports or 96 SFP+ ports or 96 HPE Smart Rate Multi-Gigabit or 24 40GbE ports, or a combination

Power supplies

4 power supply slots 2 minimum power supplies required (ordered separately)

Fan tray

includes: 1 x J9832A 1 fan tray slot

Physical characteristics

Dimensions

17.5(w) x 17.75(d) x 12.1(h) in (44.45 x 45.09 x 30.73 cm) (7U height)

Weight

45.19 lb (20.5 kg)

Memory and processor

v3 Gigabit module

Dual ARM Coretex A9 @ 1 GHz; Packet buffer size: 13.5 MB Internal

v2 Gigabit module

ARM11 @ 450 MHz; Packet buffer size: 18 Mb internal

v3 10G module

Dual ARM Coretex A9 @ 1 GHz; Packet buffer size: 13.5 MB Internal

v2 10G module

ARM11 @ 550 MHz; Packet buffer size: 18 MB internal

v3 40G module

Dual ARM Coretex A9 @ 1 GHz; Packet buffer size: 13.5 MB Internal

Management Module

Freescale P2020 dual core @ 1.2 GHz, 16 MB flash, 1 GB SD Card, 4 GB DDR3 SODIMM

Mounting and enclosure

Mounts in an EIA standard 19-inch telco rack or equipment cabinet (hardware included); horizontal surface mounting only

Performance

1000 Mb Latency

< 2.8 µs (FIFO 64-byte packets)

10 Gbps Latency

< 1.8 µ

40 Gbps Latency

< 1.5 μs (FIFO 64-byte packets)

Throughput

up to 1142.8 Mpps

Routing/Switching capacity

1920 Gbps

Switch fabric speed

2030 Gbps

Routing table size

10000 entries (IPv4), 5000 entries (IPv6)

MAC address table size

64000 entries

Environment

Operating temperature

32°F to 113°F (0°C to 45°C); 0°C to 40°C with J8177C transceiver installed, 0°C to 35°C with FIPS Opacity Shield installed

Operating relative humidity

15% to 95% @ 113°F (45°C), noncondensing

Non-operating/Storage temperature

-40°F to 158°F (-40°C to 70°C)

Non-operating/Storage relative humidity

15% to 95% @ 149°F (65°C), noncondensing

Altitude

up to 10,000 ft (3 km)

Acoustic

Power: 49 dB, Pressure: 35.7 dB ISO 7779, ISO 9296

100BASE-TX, IEEE 802.3ab Type 1000BASE-T, IEEE 802.3at PoE+); Media Type: Auto10BASE-T/100BASE-TX: half or full; 1000BASE-T: full only 2 open 10GbE SFP+ transceiver slots 8 open module slots

IPv6 Ready Certified

s (FIFO 64-byte packets)

Page

QuickSpecs

Aruba 5400R zl2 Switch Series

Technical Specifications

Electrical characteristics

Frequency

50/60 Hz

80plus.org Certification

Gold

Description

Does not come with power supply. Four power supply slots are available; three different power supplies are available. See power supply products for additional specifications.

Maximum heat dissipation

4900 BTU/hr (5169 kJ/hr), (max. non-PoE); 7400 BTU/hr (7,807 kJ/hr) (max. using PoE)

Voltage

110 - 127 / 200 - 240 VAC, rated

Idle power

312 W

NOTE:

Idle power is the actual power consumption of the device with no ports connected. Heat dissipation does not include heat dissipated powered devices themselves. When more than four power cords are installed in a 5412R zl2 switch chassis, additional installation requirements are needed. Refer to the HPE 5400R zl2 Switches Quick Setup Guide and Safety/Regulatory Information manual for details.

Safety

CSA 22.2 No. 60950; UL 60950; IEC 60950; EN 60950

Emissions

FCC part 15 Class A; EN 55022/CISPR 22 Class A

Immunity

EN 55024, CISPR 24

ESD

IEC 61000-4-2; 4 kV CD, 8 kV AD; HPE ENV. 765.002

Radiated

IEC 61000-4-3; 3 V/m

EFT/Burst

IEC 61000-4-4; 1.0 kV (power line), 0.5 kV (signal line)

Surge

IEC 61000-4-5; 1 kV/2 kV AC, 1kV signal, 0.5 kV DC

Conducted

IEC 61000-4-6; 3 Vrms

Power frequency magnetic field

IEC 61000-4-8; 1 A/m, 50 or 60 Hz

Voltage dips and interruptions

IEC 61000-4-11; >95% reduction, 0.5 period; 30% reduction, 25 periods Harmonics

EN 61000-3-2, IEC 61000-3-2

Flicker

EN 61000-3-3, IEC 61000-3-3

Management

Aruba AirWave Network Management; IMC – Intelligent Management Center; Command-line interface;

band management (serial RS-232c or micro usb)

NOTE:

Supported 1G SFP transceivers are revision "B" or later (product number ends with the letter "B" or later; for example, J9142B, J8177C).

Services

Refer to the Hewlett Packard Enterprise website at http://www.hpe.com/networking/services for

level descriptions and product numbers. For details about services and response

times in your area, please contact your local Hewlett Packard Enterprise sales office.

by the PoE-

Web browser; Configuration menu; Out-of-band management (RJ-45 Ethernet); SNMP manager; Out-of-

details on the service-

Page

QuickSpecs

Aruba 5400R zl2 Switch Series

Technical Specifications

HPE 5406R-44G-PoE+/4SFP (No PSU) v2 zl2 Switch (J9824A)

Included accessories

1 Aruba 5400R zl2 Management Module (J9827A) 1 Aruba 5406R zl2 Switch Fan Tray (J9831A)

I/O ports and slots

44 RJ-45 autosensing 10/100/1000 PoE+ ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type

ts or 48

HPE Smart Rate Multi-Gigabit or 12 40GbE ports, or a combination

Power supplies

2 power supply slots 1 minimum power supply required (ordered separately)

Fan tray

includes: 1 x J9831A 1 fan tray slot

Physical characteristics

Dimensions

17.5(w) x 17.75(d) x 6.9(h) in (44.45 x 45.09 x 17.53 cm) (4U height)

Weight

26.19 lb (11.88 kg)

Memory and processor

v3 Gigabit module

Dual ARM Coretex A9 @ 1 GHz; Packet buffer size: 13.5 MB Internal

v2 Gigabit module

ARM11 @ 450 MHz; Packet buffer size: 18 Mb internal

v3 10G module

Dual ARM Coretex A9 @ 1 GHz; Packet buffer size: 13.5 MB Internal

v2 10G module

ARM11 @ 550 MHz; Packet buffer size: 18 MB internal

v3 40G module

Dual ARM Coretex A9 @ 1 GHz; Packet buffer size: 13.5 MB Internal

Management Module

Freescale P2020 dual core @ 1.2 GHz, 16 MB flash, 1 GB SD Card, 4 GB DDR3 SODIMM

Mounting and enclosure

Mounts in an EIA standard 19-inch telco rack or equipment cabinet (hardware included); horizontal surface mounting only

Performance

1000 Mb Latency

< 2.8 µs (FIFO 64-byte packets)

10 Gbps Latency

< 1.8 µ

40 Gbps Latency

< 1.5 μs (FIFO 64-byte packets)

Throughput

up to 571.4 Mpps

Routing/Switching capacity

960 Gbps

Switch fabric speed

1015 Gbps

Routing table size

10000 entries (IPv4), 5000 entries (IPv6)

MAC address table size

64000 entries

Environment

Operating temperature

32°F to 113°F (0°C to 45°C); 0°C to 40°C with J8177C transceiver installed, 0°C to 35°C with FIPS Opacity Shield installed

Operating relative humidity

15% to 95% @ 113°F (45°C), noncondensing

Non-operating/Storage temperature

-40°F to 158°F (-40°C to 70°C)

Non-operating/Storage relative humidity

15% to 95% @ 149°F (65°C), noncondensing

Altitude

up to 10,000 ft (3 km)

Acoustic

Power: 44 dB, Pressure: 31.7 dB ISO 7779, ISO 9296

100BASE-TX, IEEE 802.3ab Type 1000BASE-T, IEEE 802.3at PoE+); Media Type: Auto MDIX; Duplex: 10BASE T/100BASE-TX: half or full; 1000BASE-T: full only 4 open SFP transceiver slots 4 open module slots Supports a maximum of 144 autosensing 10/100/1000 ports or 144 SFP ports or 48 SFP+ por

IPv6 Ready Certified

s (FIFO 64-byte packets)

Page

QuickSpecs

Aruba 5400R zl2 Switch Series

Technical Specifications

Electrical characteristics

Frequency

50/60 Hz

80plus.org Certification

Gold

Description

Does not come with power supply. Two open power supply slots are available; three different power supplies are available. See power supply products for additional specifications.

Maximum heat dissipation

2450 BTU/hr (2584.75 kJ/hr), (max. non-PoE); 3700 BTU/hr (3903 kJ/hr) (max. using PoE)

Voltage

110 - 127 / 200 - 240 VAC, rated

Idle power

215 W

NOTE:

Idle power is the actual power consumption of the device with no ports connected. Heat dissipation does not include heat dissipated by the PoE-powered devices themselves.

Safety

CSA 22.2 No. 60950; UL 60950; IEC 60950; EN 60950

Emissions

FCC part 15 Class A; EN 55022/CISPR 22 Class A

Immunity

EN 55024, CISPR 24

ESD

IEC 61000-4-2; 4 kV CD, 8 kV AD; HPE ENV. 765.002

Radiated

IEC 61000-4-3; 3 V/m

EFT/Burst

IEC 61000-4-4; 1.0 kV (power line), 0.5 kV (signal line)

Surge

IEC 61000-4-5; 1 kV/2 kV AC, 1kV signal, 0.5 kV DC

Conducted

IEC 61000-4-6; 3 Vrms

Power frequency magnetic field

IEC 61000-4-8; 1 A/m, 50 or 60 Hz

Voltage dips and

IEC 61000-4-11; >95% reduction, 0.5 period; 30% reduction, 25 periods Harmonics

EN 61000-3-2, IEC 61000-3-2

Flicker

EN 61000-3-3, IEC 61000-3-3

Management

Aruba AirWave Network Management; IMC – Intelligent Management Center; Command-line interface;

band management (serial RS-232c or micro usb)

NOTE:

Supported 1G SFP transceivers are revision "B" or later (product number ends with the letter "B" or later; for example, J9142B, J8177C).

Services

Refer to the Hewlett Packard Enterprise website at http://www.hpe.com/networking/services for

level descriptions and product numbers. For details about services and response

times in your area, please contact your local Hewlett Packard Enterprise sales office.

interruptions

Web browser; Configuration menu; Out-of-band management (RJ-45 Ethernet); SNMP manager; Out-of-

details on the service-

Page

QuickSpecs

Aruba 5400R zl2 Switch Series

Technical Specifications

HPE 5406R-8XGT/8SFP+ (No PSU) v2 zl2 Switch (J9868A)

Included accessories

1 Aruba 5400R zl2 Management Module (J9827A) 1 Aruba 5406R zl2 Switch Fan Tray (J9831A)

I/O ports and slots

8 RJ-45 10GbE ports (IEEE 802.3an-2006 Type 10GBASE-T)

Supports a maximum of 144 autosensing 10/100/1000 ports or 144 SFP ports or 48 SFP+ ports or 48 HPE Smart Rate Multi-Gigabit or 12 40GbE ports, or a combination

Power supplies

2 power supply slots 1 minimum power supply required (ordered separately)

Fan tray

includes: 1 x J9831A 1 fan tray slot

Physical characteristics

Dimensions

17.5(w) x 17.75(d) x 6.9(h) in (44.45 x 45.09 x 17.53 cm) (4U height)

Weight

28.11 lb (12.75 kg)

Memory and processor

v3 Gigabit module

Dual ARM Coretex A9 @ 1 GHz; Packet buffer size: 13.5 MB Internal

v2 Gigabit module

ARM11 @ 450 MHz; Packet buffer size: 18 Mb internal

v3 10G module

Dual ARM Coretex A9 @ 1 GHz; Packet buffer size: 13.5 MB Internal

v2 10G module

ARM11 @ 550 MHz; Packet buffer size: 18 MB internal

v3 40G module

Dual ARM Coretex A9 @ 1 GHz; Packet buffer size: 13.5 MB Internal

Management Module

Freescale P2020 dual core @ 1.2 GHz, 16 MB flash, 1 GB SD Card, 4 GB DDR3 SODIMM

Mounting and enclosure

Mounts in an EIA standard 19-inch telco rack or equipment cabinet (hardware included); horizontal surface mounting only

Performance

1000 Mb Latency

< 2.8 µ

10 Gbps Latency

< 1.8 µs (FIFO 64-byte packets)

40 Gbps Latency

< 1.5 μ

Throughput

up to 571.4 Mpps

Routing/Switching capacity

960 Gbps

Switch fabric speed

1015 Gbps

Routing table size

10000 entries (IPv4), 5000 entries (IPv6)

MAC address table size

64000 entries

Environment

Operating temperature

32°F to 113°F (0°C to 45°C); 0°C to 40°C with J8177C transceiver installed, 0°C to 35°C with FIPS Opacity Shield installed

Operating relative humidity

15% to 95% @ 113°F (45°C), noncondensing

Non-operating/Storage

-40°F to 158°F (-40°C to 70°C)

Non-operating/Storage relative humidity

15% to 95% @ 149°F (65°C), noncondensing

Altitude

up to 10,000 ft (3 km)

Acoustic

Power: 44 dB, Pressure: 31.7 dB ISO 7779, ISO 9296

8 open 10GbE SFP+ transceiver slots 4 open module slots

IPv6 Ready Certified

s (FIFO 64-byte packets)

temperature

Page

QuickSpecs

Aruba 5400R zl2 Switch Series

Technical Specifications

Electrical characteristics

Frequency

50/60 Hz

80plus.org Certification

Gold

Description

Does not come with power supply. Two open power supply slots are available; three different power supplies are available. See power supply products for additional specifications.

Maximum heat dissipation

2450 BTU/hr (2584.75 kJ/hr), (max. non-PoE); 3700 BTU/hr (3903 kJ/hr) (max. using PoE)

Voltage

110 - 127 / 200 - 240 VAC, rated

Idle power

215 W

NOTE:

Idle power is the actual power consumption of the device with no ports connected. Heat dissipation does not include heat dissipated by the PoE powered devices themselves.

Safety

CSA 22.2 No. 60950; UL 60950; IEC 60950; EN 60950

Emissions

FCC part 15 Class A; EN 55022/CISPR 22 Class A

Immunity

EN 55024, CISPR 24

ESD

IEC 61000-4-2; 4 kV CD, 8 kV AD; HPE ENV. 765.002

Radiated

IEC 61000-4-3; 3 V/m

EFT/Burst

IEC 61000-4-4; 1.0 kV (power line), 0.5 kV (signal line)

Surge

IEC 61000-4-5; 1 kV/2 kV AC, 1kV signal, 0.5 kV DC

Conducted

IEC 61000-4-6; 3 Vrms

Power frequency

IEC 61000-4-8; 1 A/m, 50 or 60 Hz

Voltage dips and interruptions

IEC 61000-4-11; >95% reduction, 0.5 period; 30% reduction, 25 periods Harmonics

EN 61000-3-2, IEC 61000-3-2

Flicker

EN 61000-3-3, IEC 61000-3-3

Management

Aruba AirWave Network Management; IMC – Intelligent Management Center; Command-line interface;

band management (serial RS-232c or micro usb)

NOTE:

Supported 1G SFP transceivers are revision "B" or later (product number ends with the letter "B" or later; for example, J9142B, J8177C).

Services

Refer to the Hewlett Packard Enterprise website at http://www.hpe.com/networking/services for

level descriptions and product numbers. For details about services and response

times in your area, please contact your local Hewlett Packard Enterprise sales office.

magnetic field

Web browser; Configuration menu; Out-of-band management (RJ-45 Ethernet); SNMP manager; Out-of

details on the service-

Page

QuickSpecs

Aruba 5400R zl2 Switch Series

Technical Specifications

Aruba 5412R 92GT PoE+ and 4-port SFP+ (No PSU) v3 zl2 Switch (JL001A)

Included accessories

1 Aruba 5400R zl2 Management Module (J9827A)

1 Aruba 20-port 10/100/1000BASE-T PoE+ / 4-port 1G/10GbE SFP+ MACsec v3 zl2 Module (J9990A)

I/O ports and slots

92 RJ-45 autosensing 10/100/1000 PoE+ ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type

MDIX; Duplex:

Gigabit or 24 40GbE ports, or a

combination

Power supplies

4 power supply slots 2 minimum power supplies required (ordered separately)

Fan tray

includes: 1 x J9832A 1 fan tray slot

Physical characteristics

Dimensions

17.5(w) x 17.75(d) x 12.1(h) in (44.45 x 45.09 x 30.73 cm) (7U height)

Weight

45.19 lb (20.5 kg)

Memory and processor

v3 Gigabit module

Dual ARM Coretex A9 @ 1 GHz; Packet buffer size: 13.5 MB internal

v2 Gigabit module

ARM11 @ 450 MHz; Packet buffer size: 18 Mb internal

v3 10G module

Dual ARM Coretex A9 @ 1 GHz; Packet buffer size: 13.5 MB internal

v2 10G module

ARM11 @ 550 MHz; Packet buffer size: 18 MB internal

v3 40G module

Dual ARM Coretex A9 @ 1 GHz; Packet buffer size: 13.5 MB internal

Management Module

Freescale P2020 dual core @ 1.2 MHz, 16 MB flash, 1 GB SD Card, 4 GB DDR3 SODIMM

Mounting and enclosure

Mounts in an EIA standard 19-inch telco rack or equipment cabinet (hardware included); Horizontal surface mounting only

Performance

1000 Mb Latency

< 2.8 µ

10 Gbps Latency

< 1.8 µs (FIFO 64-byte packets)

40 Gbps Latency

< 1.5 µ

Throughput

up to 1142.8 Mpps

Routing/Switching capacity

1920 Gbps

Switch fabric speed

2030 Gbps

Routing table size

10000 entries (IPv4), 5000 entries (IPv6)

MAC address table size

64000 entries

Environment

Operating temperature

32°F to 113°F (0°C to 45°C); 0°C to 40°C with J8177C transceiver installed, 0°C to 35°C with FIPS Opacity Shield installed

Operating relative humidity

15% to 95% @ 113°F (45°C), noncondensing

Non-operating/Storage temperature

-40°F to 158°F (-40°C to 70°C)

Non-operating/Storage

15% to 95% @ 149°F (65°C), noncondensing

Altitude

up to 10,000 ft (3 km)

1 Aruba 5412R zl2 Switch Fan Tray (J9832A) 3 Aruba 24-port 10/100/1000BASE-T PoE+ MACsec v3 zl2 Module (J9986A)

100BASE-TX, IEEE 802.3ab Type 1000BASE-T, IEEE 802.3at PoE+); Media Type: Auto10BASE-T/100BASE-TX: half or full; 1000BASE-T: full only 4 open 10GbE SFP+ transceiver slots 8 open module slots Supports a maximum of 288 autosensing 10/100/1000 ports or 288 SFP ports or 96 SFP+ ports or 96 HPE Smart Rate Multi-

s (FIFO 64-byte packets)

relative humidity

Page

QuickSpecs

Aruba 5400R zl2 Switch Series

Technical Specifications

Acoustic

Power: 49 dB, Pressure: 35.7 dB ISO 7779, ISO 9296

Electrical characteristics

Frequency

50/60 Hz

80plus.org Certification

Gold

Description

Does not come with power supply. Four open power supply slots are available; three different power supplies are available. See power supply products for additional specifications

Maximum heat dissipation

4900 BTU/hr (5169.5 kJ/hr), (max. non-PoE); 7400 BTU/hr (7807 kJ/hr) (max. using PoE)

Voltage

110 - 127 / 200 - 240 VAC, rated

Idle power

312 W

NOTE:

Idle power is the actual power consumption of the device with no ports connected. Heat dissipation does not include heat dissipated by the PoE-powered devices themselves. When more than four power cords are installed in a 5412R zl2 switch chassis, additional installation requirements are needed. Refer to the HPE 5400R zl2 Switches Quick Setup Guide and Safety/Regulatory Information manual for details.

Safety

CSA 22.2 No. 60950; UL 60950; IEC 60950; EN 60950

Emissions

FCC part 15 Class A; EN 55022/CISPR 22 Class A

Immunity

EN 55024, CISPR 24

ESD

IEC 61000-4-2; 4 kV CD, 8 kV AD; HPE ENV. 765.002

Radiated

IEC 61000-4-3; 3 V/m

EFT/Burst

IEC 61000-4-4; 1.0 kV (power line), 0.5 kV (signal line)

Surge

IEC 61000-4-5; 1 kV/2 kV AC, 1kV signal, 0.5 kV DC

Conducted

IEC 61000-4-6; 3 Vrms

Power frequency magnetic field

IEC 61000-4-8; 1 A/m, 50 or 60 Hz

Voltage dips and interruptions

IEC 61000-4-11; >95% reduction, 0.5 period; 30% reduction, 25 periods Harmonics

EN 61000-3-2, IEC 61000-3-2

Flicker

EN 61000-3-3, IEC 61000-3-3

Management

Aruba AirWave Network Management; IMC – Intelligent Management Center; Command-line interface;

band management (serial RS-232c or micro usb)

NOTE:

Supported 1G SFP transceivers are revision "B" or later (product number ends with the letter "B" or later; for example, J9142B, J8177C).

Services

Refer to the Hewlett Packard Enterprise website at http://www.hpe.com/networking/services for

level descriptions and product numbers. For details about services and response

times in your area, please contact your local Hewlett Packard Enterprise sales office.

Web browser; Configuration menu; Out-of-band management (RJ-45 Ethernet); SNMP manager; Out-of-

details on the service-

Page

QuickSpecs

Aruba 5400R zl2 Switch Series

Technical Specifications

Aruba 5406R 8-port 1/2.5/5/10GBASE-T PoE+ / 8-port SFP+ (No PSU) v3 zl2 Switch (JL002A)

Included accessories

1 Aruba 5400R zl2 Management Module (J9827A) 1 Aruba 5406R zl2 Switch Fan Tray (J9831A) 1 Aruba 8 1 Aruba 8-port 1/2.5/5/10GBASE-T PoE+ MACsec v3 zl2 Module (J9995A)

I/O ports and slots

8 RJ-45 HPE Smart Rate Multi-Gigabit ports (100M, 1/2.5/5GBASE-T and 10GBASE-T) 8 open 10GbE SFP+ transceiver slots 4 open Supports a maximum of 144 autosensing 10/100/1000 ports or 144 SFP ports or 48 SFP+ ports or 48 HPE Smart Rate Multi-Gigabit or 12 40GbE ports, or a combination

Power supplies

2 power supply slots 1 minimum power supply required (ordered separately)

Fan tray

includes: 1 x J9831A 1 fan tray slot

Physical characteristics

Dimensions

17.5(w) x 17.75(d) x 6.9(h) in (44.45 x 45.09 x 17.53 cm)

Weight

(4U height)

Memory and processor

v3 Gigabit module

Dual ARM Coretex A9 @ 1 GHz; Packet buffer size: 13.5 MB internal

v2 Gigabit module

ARM 11 @ 450 MHz; Packet buffer size: 18 MB internal

v3 10G module

Dual ARM Coretex A9 @ 1 GHz; Packet buffer size: 13.5 MB internal

v2 10G module

ARM11 @ 550 MHz; Packet buffer size: 18 MB internal

v3 40G module

Dual ARM Coretex A9 @ 1 GHz; Packet buffer size: 13.5 MB internal

Management Module

Freescale P2020 dual core @ 1.2 GHz, 16 MB flash, 1 GB SD Card, 4 GB DDR3 SODIMM

Mounting and enclosure

Mounts in an EIA standard 19-inch telco rack or equipment cabinet (hardware included); Horizontal surface mounting only

Performance

1000 Mb Latency

< 2.8 µ

10 Gbps Latency

< 1.8 µs (FIFO 64-byte packets)

40 Gbps Latency

< 1.5 µ

Throughput

up to 571.4 Mpps

Routing/Switching capacity

960 Gbps

Switch fabric speed

1015 Gbps

Routing table size

10000 entries (IPv4), 5000 entries (IPv6)

MAC address table size

64000 entries

Environment

Operating temperature

32°F to 113°F (0°C to 45°C); 0°C to 40°C with J8177C transceiver installed, 0°C to 35°C with FIPS Opacity Shield installed

Operating relative humidity

15% to 95% @ 113°F (45°C), noncondensing

Non-operating/Storage temperature

-40°F to 158°F (-40°C to 70°C)

Non-operating/Storage relative humidity

15% to 95% @ 149°F (65°C), noncondensing

Altitude

up to 10,000 ft (3 km)

Acoustic

Power: 44 dB, Pressure: 31.7 dB ISO 7779, ISO 9296

-port 1G/10GbE SFP+ MACsec v3 zl2 Module (J9993A)

module slots

s (FIFO 64-byte packets)

Page

QuickSpecs

Aruba 5400R zl2 Switch Series

Technical Specifications

Electrical

Frequency

50/60 Hz

80plus.org Certification

Gold

Description

Does not come with power supply. Two open power supply slots are available; three different power supplies are available. See power supply products for additional specifications.

Maximum heat dissipation

2450 BTU/hr (2584.75 kJ/hr), (max. non-PoE); 3700 BTU/hr (3903 kJ/hr) (max. using PoE)

Voltage

110 - 127 / 200 - 240 VAC, rated

Idle power

215 W

NOTE:

Idle power is the actual power consumption of the device with no ports connected. Heat dissipation does not include heat dissipated by the PoE

devices themselves.

Safety

CSA 22.2 No. 60950; UL 60950; IEC 60950; EN 60950

Emissions

FCC part 15 Class A; EN 55022/CISPR 22 Class A

Immunity

EN 55024, CISPR 24

ESD

IEC 61000-4-2; 4 kV CD, 8 kV AD; HPE ENV. 765.002

Radiated

IEC 61000-4-3; 3 V/m

EFT/Burst

IEC 61000-4-4; 1.0 kV (power line), 0.5 kV (signal line)

Surge

IEC 61000-4-5; 1 kV/2 kV AC, 1kV signal, 0.5 kV DC

Conducted

IEC 61000-4-6; 3 Vrms

Power frequency magnetic field

IEC 61000-4-8; 1 A/m, 50 or 60 Hz

Voltage dips and interruptions

IEC 61000-4-11; >95% reduction, 0.5 period; 30% reduction, 25 periods Harmonics

EN 61000-3-2, IEC 61000-3-2

Flicker

EN 61000-3-3, IEC 61000-3-3

Management

Aruba AirWave Network Management; IMC – Intelligent Management Center; Command-line interface; Web browser; Configuration menu; Out

band

management (serial RS-232c or micro usb)

NOTE:

Supported 1G SFP transceivers are revision "B" or later (product number ends with the letter "B" or later; For example, J9142B, J8177C). HPE Smart Rate Multi

T, 2.5 Gigabit, and 5 Gigabit Ethernet: Category 5e or

better UTP or STP; 10GBASE-T: Category 6 or better (CAT6A recommended) UTP or STP

Services

Refer to the Hewlett Packard Enterprise website at http://www.hpe.com/networking/services for details on the service-level descriptions and product numbers. For details about services and response times in your area, please contact your local Hewlett Packard Enterprise sales office.

characteristics

-power

-of-band management (RJ-45 Ethernet); SNMP manager; Out-of-

-Gigabit Cabling; 1000BASE-

Page

QuickSpecs

Aruba 5400R zl2 Switch Series

Technical Specifications

Aruba 5406R 44GT PoE+ and 4-port SFP+ (No PSU) v3 zl2 Switch (JL003A)

Included accessories

1 Aruba 5400R zl2 Management Module (J9827A) 1 Aruba 5406R zl2 Switch Fan Tray (J9831A) 1 Aruba 1 Aruba 20-port 10/100/1000BASE-T PoE+ / 4-port 1G/10GbE SFP+ MACsec v3 zl2 Module (J9990A)

I/O ports and slots

44 RJ-45 autosensing 10/100/1000 PoE+ ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE

MDIX; Duplex: 10BASE 4 open 10GbE SFP+ transceiver slots 4 open module slots Supports a maximum of 144 autosensing 10/100/1000 ports or 144 SFP ports or 48 SFP+ ports or 48 HPE Smart Rate Multi-Gigabit or 12 40GbE ports, or a combination

Power supplies

2 power supply slots 1 minimum power supply required (ordered separately)

Fan tray

includes: 1 x J9831A 1 fan tray slot

Physical characteristics

Dimensions

17.5(w) x 17.75(d) x 6.9(h) in (44.45 x 45.09 x 17.53 cm) (4U height)

Weight

28.11 lb (12.75 kg)

Memory and processor

v3 Gigabit module

Dual ARM Coretex A9 @ 1 GHz; Packet buffer size: 13.5 MB internal

v2 Gigabit module

ARM11 @ 450 MHz; Packet buffer size: 18 MB internal

v3 10G module

Dual ARM Coretex A9 @ 1 GHz; Packet buffer size: 13.5 MB internal

v2 10G module

ARM11 @ 550 MHz; Packet buffer size: 18 MB internal

v3 40G module

Dual ARM Coretex A9 @ 1 GHz; Packet buffer size: 13.5 MB internal

Management Module

Freescale P2020 dual core @ 1.2 GHz, 16 MB flash, 1 GB SD Card, 4 GB DDR3 SODIMM

Mounting and enclosure

Mounts in an EIA standard 19-inch telco rack or equipment cabinet (hardware included); Horizontal surface mounting only

Performance

1000 Mb Latency

< 2.8 µs (FIFO 64-byte packets)

10 Gbps Latency

< 1.8 µ

40 Gbps Latency

< 1.5 µs (FIFO 64-byte packets)

Throughput

up to 571.4 Mpps

Routing/Switching capacity

960 Gbps

Switch fabric speed

1015 Gbps

Routing table size

10000 entries (IPv4), 5000 entries (IPv6)

MAC address table size

64000 entries

Environment

Operating temperature

32°F to 113°F (0°C to 45°C); 0°C to 40°C with J8177C transceiver installed, 0°C to 35°C with FIPS Opacity Shield installed

Operating relative humidity

15% to 95% @ 113°F (45°C), noncondensing

Non-operating/Storage temperature

-40°F to 158°F (-40°C to 70°C)

Non-operating/Storage relative humidity

15% to 95% @ 149°F (65°C), noncondensing

Altitude

up to 10,000 ft (3 km)

Acoustic

Power: 44 dB, Pressure: 31.7 dB ISO 7779, ISO 9296

24-port 10/100/1000BASE-T PoE+ MACsec v3 zl2 Module (J9986A)

-TX, IEEE 802.3ab Type 1000BASE-T, IEEE 802.3at PoE+); Media Type: Auto-

-T/100BASE-TX: half or full; 1000BASE-T: full only

s (FIFO 64-byte packets)

Page

QuickSpecs

Aruba 5400R zl2 Switch Series

Technical Specifications

Electrical characteristics

Frequency

50/60 Hz

80plus.org Certification

Gold

Description

Does not come with power supply. Two open power supply slots are available; three different power supplies are available. See power supply products for additional specifications

Maximum heat dissipation

2450 BTU/hr (2584.75 kJ/hr), (max. non-PoE); 3700 BTU/hr (3903 kJ/hr) (max. using PoE)

Voltage

110 - 127 / 200 - 240 VAC, rated

Idle power

215 W

NOTE:

Idle power is the actual power consumption of the device with no ports connected. Heat dissipation does not include heat dissipated by the PoE-powered devices themselves.

Safety

CSA 22.2 No. 60950; UL 60950; IEC 60950; EN 60950

Emissions

FCC part 15 Class A; EN 55022/CISPR 22 Class A

Immunity

EN 55024, CISPR 24

ESD

IEC 61000-4-2; 4 kV CD, 8 kV AD; HPE ENV. 765.002

Radiated

IEC 61000-4-3; 3 V/m

EFT/Burst

IEC 61000-4-4; 1.0 kV (power line), 0.5 kV (signal line)

Surge

IEC 61000-4-5; 1 kV/2 kV AC, 1kV signal, 0.5 kV DCIEC 61000-4-6; 3 Vrms

Conducted

IEC 61000-4-6; 3 Vrms

Power frequency magnetic field

IEC 61000-4-8; 1 A/m, 50 or 60 Hz

Voltage dips and interruptions

IEC 61000-4-11; >95% reduction, 0.5 period; 30% reduction, 25 periods Harmonics

EN 61000-3-2, IEC 61000-3-2

Flicker

EN 61000-3-3, IEC 61000-3-3

Management

Aruba AirWave Network Management; IMC - Intelligent Management Center; Command-line interface;

band management (serial RS-232c or micro usb)

NOTE:

Supported 1G SFP transceivers are revision "B" or later (product number ends with the letter "B" or later; For example, J9142B, J8177C).

Services

Refer to the Hewlett Packard Enterprise website at http://www.hpe.com/networking/services for

ils about services and response

times in your area, please contact your local Hewlett Packard Enterprise sales office.

Web browser; Configuration menu; Out-of-band management (RJ-45 Ethernet); SNMP manager; Out-of-

details on the service-level descriptions and product numbers. For deta

Page

QuickSpecs

Aruba 5400R zl2 Switch Series

Technical Specifications

Aruba 5406R 16-port SFP+ (No PSU) v3 zl2 Switch (JL095A)

Included accessories

1 Aruba 5400R zl2 Management Module (J9827A)

2 Aruba 8-port 1G/10GbE SFP+ MACsec v3 zl2 Module (J9993A)

I/O ports and slots

16 open 10GbE SFP+ transceiver slots

ports or 48

HPE Smart Rate Multi-Gigabit or 12 40GbE ports, or a combination

Power supplies

2 power supply slots 1 minimum power supply required (ordered separately)

Fan tray

includes: 1 x J9831A 1 fan tray slot

Physical characteristics

Dimensions

17.5(w) x 17.75(d) x 6.9(h) in (44.45 x 45.09 x 17.53 cm) (4U height)

Weight

28.11 lb (12.75 kg)

Memory and processor

v3 Gigabit module

Dual ARM Coretex A9 @ 1 GHz; Packet buffer size: 13.5 MB internal

v2 Gigabit module

ARM 11 @ 450 MHz; Packet buffer size: 18 MB internal

v3 10G module

Dual ARM Coretex A9 @ 1; Packet buffer size: 13.5 MB internal

v2 10G module

ARM11 @ 550 MHz; Packet buffer size: 18 MB internal

v3 40G module

Dual ARM Coretex A9 @ 1 GHz; Packet buffer size: 13.5 MB internal

Management Module

Freescale P2020 dual core @ 1.2 GHz, 16 MB flash, 1 GB SD Card, 4 GB DDR3 SODIMM

Mounting and enclosure

Mounts in an EIA standard 19-inch telco rack or equipment cabinet (hardware included); Horizontal surface mounting only

Performance

1000 Mb Latency

< 2.8 µ

10 Gbps Latency

< 1.8 µs (FIFO 64-byte packets)

40 Gbps Latency

< 1.5 µ

Throughput

up to 571.4 Mpps

Routing/Switching capacity

960 Gbps

Switch fabric speed

1015 Gbps

Routing table size

10000 entries (IPv4), 5000 entries (IPv6)

MAC address table size

64000 entries

Environment

Operating temperature

32°F to 113°F (0°C to 45°C); 0°C to 40°C with J8177C transceiver installed, 0°C to 35°C with FIPS Opacity Shield installed

Operating relative humidity

15% to 95% @ 113°F (45°C), noncondensing

Non-operating/Storage

-40°F to 158°F (-40°C to 70°C)

Non-operating/Storage relative humidity

15% to 95% @ 149°F (65°C), noncondensing

Altitude

up to 10,000 ft (3 km)

Acoustic

Power: 44 dB, Pressure: 31.7 dB ISO 7779, ISO 9296

1 Aruba 5406R zl2 Switch Fan Tray (J9831A)

4 open module slots Supports a maximum of 144 autosensing 10/100/1000 ports or 144 SFP ports or 48 SFP+

s (FIFO 64-byte packets)

temperature

Page

QuickSpecs

Aruba 5400R zl2 Switch Series

Technical Specifications

Electrical characteristics

Frequency

50/60 Hz

80plus.org Certification

Gold

Description

Does not come with power supply. Two open power supply slots are available; three different power supplies are available. See power supply products for additional specifications.

Maximum heat dissipation

2450 BTU/hr (2584.75 kJ/hr), (max. non-PoE); 3700 BTU/hr (3903 kJ/hr) (max. using PoE)

Voltage

110 - 127 / 200 - 240 VAC, rated

Idle power

215 W

NOTE:

Idle power is the actual power consumption of the device with no ports connected. Heat dissipation does not include heat dissipated by the PoE-powered devices themselves.

Safety

CSA 22.2 No. 60950; UL 60950; IEC 60950; EN 60950

Emissions

FCC part 15 Class A; EN 55022/CISPR 22 Class A

Immunity

EN 55024, CISPR 24

ESD

IEC 61000-4-2; 4 kV CD, 8 kV AD; HPE ENV. 765.002

Radiated

IEC 61000-4-3; 3 V/m

EFT/Burst

IEC 61000-4-4; 1.0 kV (power line), 0.5 kV (signal line)

Surge

IEC 61000-4-5; 1 kV/2 kV AC, 1kV signal, 0.5 kV DC

Conducted

IEC 61000-4-6; 3 Vrms

Power frequency magnetic field

IEC 61000-4-8; 1 A/m, 50 or 60 Hz

Voltage dips and

IEC 61000-4-11; >95% reduction, 0.5 period; 30% reduction, 25 periods Harmonics

EN 61000-3-2, IEC 61000-3-2

Flicker

EN 61000-3-3, IEC 61000-3-3

Management

Aruba AirWave Network Management; IMC - Intelligent Management Center; Command-line interface;

band management (serial RS-232c or micro usb)

NOTE:

Supported 1G SFP transceivers are revision "B" or later (product number ends with the letter "B" or later; For example, J9142B, J8177C).

Services

Refer to the Hewlett Packard Enterprise website at http://www.hpe.com/networking/services for

level descriptions and product numbers. For details about services and response

times in your area, please contact your local Hewlett Packard Enterprise sales office.

interruptions

Web browser; Configuration menu; Out-of-band management (RJ-45 Ethernet); SNMP manager; Out-of-

details on the service-

Page

QuickSpecs

Aruba 5400R zl2 Switch Series

Technical Specifications

Standards and protocols

(applies to all products in series)

General Protocols

• UDLD (Uni-directional Link Detection)

BGP

• RFC 5492 Capabilities Advertisement with BGP-4

• IEEE 802.1ad Q-in-Q

• IEEE 802.1AX-2008 Link Aggregation

• IEEE 802.1D MAC Bridges

• IEEE 802.1p Priority

• IEEE 802.1Q VLANs

• IEEE 802.1s Multiple Spanning Trees

• IEEE 802.1v VLAN classification by Protocol and Port

• IEEE 802.1w Rapid Reconfiguration of Spanning Tree

• IEEE 802.3ad Link Aggregation Control Protocol (LACP)

• IEEE 802.3af Power over Ethernet

• IEEE 802.3az Energy Efficient Ethernet

• IEEE 802.3x Flow Control

• IEEE 802.3bz 2.5Gb/s and 5Gb/s interfaces

• RFC 768 UDP

• RFC 783 TFTP Protocol (revision 2)

• RFC 792 ICMP

• RFC 793 TCP

• RFC 826 ARP

• RFC 854 TELNET

• RFC 868 Time Protocol

• RFC 951 BOOTP

• RFC 1058 RIPv1

• RFC 1350 TFTP Protocol (revision 2)

• RFC 1519 CIDR

• RFC 1542 BOOTP Extensions

• RFC 1918 Address Allocation for Private Internet

• RFC 2030 Simple Network Time Protocol (SNTP) v4

• RFC 2131 DHCP

• RFC 2453 RIPv2

• RFC 2548 (MS-RAS-Vendor only)

• RFC 3046 DHCP Relay Agent Information Option

• RFC 3575 IANA Considerations for RADIUS

• RFC 3576 Ext to RADIUS (CoA only)

• RFC 3768 VRRP

• RFC 4675 RADIUS VLAN & Priority

• RFC 5880 Bidirectional Forwarding Detection

• RFC 5905 Network Time Protocol Version 4: Protocol and Algorithms Specification

• RFC 1997 BGP Communities Attribute

• RFC 2918 Route Refresh Capability

• RFC 4271 A Border Gateway Protocol 4 (BGP-4)

• RFC 4456 BGP Route Reflection: An Alternative to Full Mesh Internal BGP (IBGP)

Page

QuickSpecs

Aruba 5400R zl2 Switch Series

Technical Specifications

Network Management

• XRMON

Denial of service protection

•

Device Management

• HTML and telnet management

QoS/CoS

• RFC 2598 DiffServ Expedited Forwarding (EF)

IP Multicast

• RFC 4601 PIM Sparse Mode

OSPF

•

• IEEE 802.1AB Link Layer Discovery Protocol (LLDP)

• RFC 2819 Four groups of RMON: 1 (statistics), 2 (history), 3 (alarm) and 9 (events)

• RFC 3176 sFlow

• RFC 3411 SNMP Management Frameworks

• RFC 3412 Message Processing and Dispatching for the Simple Network Management Protocol (SNMP)

• RFC 3413 Simple Network Management Protocol (SNMP) Applications

• RFC 3414 User-based Security Model (USM) for version 3 of the Simple Network Management Protocol (SNMPv3)

• RFC 3415 View-based Access Control Model (VACM) for the Simple Network Management Protocol (SNMP)

• RFC 3418 Management Information Base (MIB) for the Simple Network Management Protocol (SNMP)

• RFC 5424 Syslog Protocol

• ANSI/TIA-1057 LLDP Media Endpoint Discovery (LLDP-MED)

• SNMPv1/v2c/v3

CPU DoS Protection

• RFC 1591 DNS (client)

• RFC 2576 (Coexistence between SNMP V1, V2, V3)

• RFC 2579 (SMIv2 Text Conventions)

• RFC 2580 (SMIv2 Conformance)

• RFC 3416 (SNMP Protocol Operations v2)

• RFC 3417 (SNMP Transport Mappings)

• RFC 2474 DiffServ Precedence, including 8 queues/port

• RFC 2475 DiffServ Architecture

• RFC 2597 DiffServ Assured Forwarding (AF)

• RFC 3376 IGMPv3

• RFC 3973 PIM Dense Mode

• RFC 2328 OSPFv2

• RFC 3101 OSPF NSSA

RFC 5340 OSPFv3 for IPv6

Page

QuickSpecs

Aruba 5400R zl2 Switch Series

Technical Specifications

IPv6

• RFC 6620 FCFS SAVI

• RFC 1981 IPv6 Path MTU Discovery

• RFC 2080 RIPng for IPv6

• RFC 2081 RIPng Protocol Applicability Statement

• RFC 2082 RIP-2 MD5

• RFC 2375 IPv6 Multicast Address Assignments

• RFC 2460 IPv6 Specification

• RFC 2464 Transmission of IPv6 over Ethernet Networks

• RFC 2710 Multicast Listener Discovery (MLD) for IPv6

• RFC 2925 Definitions of Managed Objects for Remote Ping, Traceroute, and Lookup Operations (Ping only)

• RFC 3019 MLDv1 MIB

• RFC 3315 DHCPv6 (client and relay)

• RFC 3484 Default Address Selection for IPv6

• RFC 3587 IPv6 Global Unicast Address Format

• RFC 3596 DNS Extension for IPv6

• RFC 3810 MLDv2 for IPv6

• RFC 4022 MIB for TCP

• RFC 4087 IP Tunnel MIB

• RFC 4113 MIB for UDP

• RFC 4213 Basic Transition Mechanisms for IPv6 Hosts and Routers

• RFC 4251 SSHv6 Architecture

• RFC 4252 SSHv6 Authentication

• RFC 4253 SSHv6 Transport Layer

• RFC 4254 SSHv6 Connection

• RFC 4291 IP Version 6 Addressing Architecture

• RFC 4293 MIB for IP

• RFC 4294 IPv6 Node Requirements

• RFC 4419 Key Exchange for SSH

• RFC 4443 ICMPv6

• RFC 4541 IGMP & MLD Snooping Switch

• RFC 4861 IPv6 Neighbor Discovery

• RFC 4862 IPv6 Stateless Address Auto-configuration

• RFC 5095 Deprecation of Type 0 Routing Headers in IPv6

• RFC 5340 OSPFv3 for IPv6

• RFC 5453 Reserved IPv6 Interface Identifiers

• RFC 5519 Multicast Group Membership Discovery MIB (MLDv2 only)

• RFC 5722 Handling of Overlapping IPv6 Fragments

Page

QuickSpecs

Aruba 5400R zl2 Switch Series

Technical Specifications

MIBs

• RFC 7331 BFD MIB

Security

• SSHv2 Secure Shell

• IEEE 802.1ap (MSTP and STP MIB's only)

• IEEE 8021-Bridge-MIB (2008)

• IEEE 8021-Q-Bridge-MIB (2008)

• RFC 1155 Structure & ID of Mgmt Info for TCP/IP Internets

• RFC 1213 MIB II

• RFC 1493 Bridge MIB

• RFC 1724 RIPv2 MIB

• RFC 1850 OSPFv2 MIB

• RFC 2021 RMONv2 MIB

• RFC 2096 IP Forwarding Table MIB

• RFC 2578 Structure of Management Information Version 2 (SMIv2)

• RFC 2613 SMON MIB

• RFC 2618 RADIUS Client MIB

• RFC 2620 RADIUS Accounting MIB

• RFC 2665 Ethernet-Like-MIB

• RFC 2668 802.3 MAU MIB

• RFC 2674 802.1p and IEEE 802.1Q Bridge MIB

• RFC 2737 Entity MIB (Version 2)

• RFC 2787 VRRP MIB

• RFC 2863 The Interfaces Group MIB

• RFC 2925 Ping MIB

• RFC 2932 IP (Multicast Routing MIB)

• RFC 2933 IGMP MIB

• RFC 4292 IP Forwarding Table MIB

• RFC 4836 Managed Objects for 802.3 Medium Attachment Units (MAU)

• IEEE 802.1AE MAC Security Standard (MACSec)

• IEEE 802.1X Port Based Network Access Control

• RFC 1321 The MD5 Message-Digest Algorithm

• RFC 1492 TACACS+

• RFC 2698 A Two Rate Three Color Marker

• RFC 2818 HTTP Over TLS

• RFC 2865 RADIUS (client only)

• RFC 2866 RADIUS Accounting

• RFC 3579 RADIUS Support For Extensible Authentication Protocol (EAP)

• RFC 6614 Transport Layer Security (TLS) Encryption over Radius (RadSec)

• RFC 7030 Enrollment over Secure Transport

• Secure Sockets Layer (SSL)

Page

QuickSpecs

Aruba 5400R zl2 Switch Series

Summary of Changes

Date

Version History

Action

Description of Change

06-Apr-2020

Version 28

Changed

Standard Features- Warranty and Configuration Information sections were updated.

06-Jan-2020

Version 27

Changed

Configuration Information section was updated.

01-Jul-2019

Version 26

Changed

Standard Features and Technical Specification sections were updated. Obsolete SKUs were removed.

04-Mar-2019

Version 25

Changed

SKU J9151D was replaced with J9151E

Obsolete SKUs were removed.

03-Dec-2018

Version 24

Changed

Key Features, Product overview and Enhanced Features were updated

01-Oct-2018

Version 23

Changed

Recommended and Extended markings removed from the document.

04-Sep-2018

Version 22

Changed

QuickSpecs updated with the current Recommended-Extended Options

02-Jul-2018

Version 21

Changed

Software feature update

08-Jan-2018

Version 20

Changed

Software feature update Configuration section updated

07-Aug-2017

Version 19

Added

SKU added: JL308A

03-Jul-2017

Version 18

Added

SKU added: JL448A

01-May-2017

Version 17

Changed

Minor edit made on Technical Specifications

06-Feb-2017

Version 16

Added

SKU added: J9830B

07-Nov-2016

Version 15

Changed

Product overview, Key Features, Features and Benefits, Technical 30-Sep-2016

Version 14

Changed

Configuration section updated

01-Aug-2016

Version 13

Changed

Adding #AC3 Option on Configuration Section.

06-Jun-2016

Version 12

Changed

Overview, Features and Benefits, Technical Specifications and Accessories updated

22-Apr-2016

Version 11

Changed

SKU descriptions updated on all the document

08-Jan-2016

Version 10

Changed

URLs updated

01-Dec-2015

Version 9

Changed

QuickSpecs name changed to Aruba 5400R zl2 Switch Series

Accessories updated.

27-Apr-2015

Version 8

Changed

Accessories added: J9986A, J9987A, J9988A, J9989A, J9990A, J9991A, J9992A, J9993A, J9995A, J9996A, JH231A, JH232A, JH233A, JH234A,

Overview and Technical Specifications were updated

20-Mar-2015

Version 7

Changed

Configuration menu for 5400zl split in to 2 menus: 5400 zl, and 5400R zl2

17-Feb-2015

Version 6

Changed

SKUs descriptions and Configuration menu updated

01-Dec-2014

Version 5

Changed

Changes were made on the entire document

05-Sep-2014

Version 4

Changed

Updated Configuration Menu

14-Jul-2014

Version 3

Changed

Updated Overview section and Technical Specifications

17-Jun-2014

Version 2

Changed

Updated I/O ports and slots in several models and also added the WLAN section to Accessories.

10-Jun-2014

Version 1

New

New QuickSpecs

CTO section was removed.

Specifications updated.

Minor changes on Features and Benefits

Product overview, Features and benefits, Technical Specifications and

JH235A, JH236A Models added: JL001A, JL002A, JL003A, JL095A

Page

QuickSpecs

Aruba 5400R zl2 Switch Series

Summary

of Changes

products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty.

shall not be liable for

technical or edit

To learn more, visit:

c04293383 - 14945 - Worldwide - V28 - 06-April-2020

Hewlett Packard Enterprise

orial errors or omissions contained herein.

Hewlett Packard Enterprise

http://www.hpe.com/networking

Page

Aruba 5406R, 5412R QuickSpecs

Specifications and Main Features

Frequently Asked Questions

User Manual

Overview

Standard Features

Related Options

Technical Specifications

Summary of Changes

c04293383 - 14945 - Worldwide - V28 - 06-April-2020