Arrow Hart - Cooper Wiring Devices Wallplates Catalog

Stainless Steel Wallplates O-1— O-6
High-Impact Thermoplastic Wallplates O-7, O-8
Thermoplastic Wallplates O-9— O-24
Thermoset Wallplates O-25— O-38
Sectional Thermoplastic Wallplates O-39
Solid Brass Wallplates O-40, O-41
Pre-Marked Special Use Plates O-42 – O-44
Thermoset Interchange Wallplates O-45
Wallplate Accessories O-46
With good looks and durability, Cooper Wiring Devices’ broad offering of wallplates can lift any residential, commercial or industrial application to its highest level. Successfully integrating form with function, our line of wallplates encompasses every application: Type 304 stainless steel for top performance in demanding environments; elegant brass for high-end commercial interiors; unbreakable thermoplastics for outstanding durability in hard-use locations; and traditional thermoset for easy-to-clean residential value. And our selection of colors is wide enough to include both traditional almond and new light almond.
We manufacture our wallplates in all sizes – standard, mid-size, and oversize – to guarantee that there is a superbly engineered Cooper device covering to fit every need.
O
O-Intro
-
1
WALLPLATES
INDUSTRIAL COMMERCIAL INSTITUTIONAL
Cooper Wiring Devices Specification Grade Wallplates – smart looking, fast installing and long-lasting.
The Cooper Wiring Devices line of wallplates is designed and manufactured to address a wide range of applications. Whether you’re faced with a commercial, institutional, industrial or residential setting, you will find the desired material, configuration, style, size or color.
Our Specification Grade Wallplates are created from a variety of materials including stainless steel, brass, thermoplastic, and thermoset plastic. Quality is the "ingredient" common to them all. Their super heavy duty construction provides outstanding performance in high-abuse applications such as those found in hospitals, schools, offices, apartments and high-traffic public areas.
In addition to standard size, we offer mid­size and oversize wallplates designed for use in applications where additional wall coverage is needed. Our deep wallplates are used in conjunction with old work outlet boxes for a flush fit to the wall.
Cooper Wiring Devices wallplates are designed and manufactured according to performance and dimensional requirements of the following industry standards: Federal Specification WP-455; NEMA Standard WD-1; the National Electrical Code; and Underwriters’ Laboratories Standard 514. To meet these requirements, Cooper Wiring Devices wallplates must demonstrate mechanical strength, fire resistance, and dielectric strength, and conform to stringent material specifications.
In addition, dimensional characteristics of Cooper Wiring Devices wallplates are designed with high specificity, both for performance needs and for compatibility with devices and outlet boxes made by other manufacturers. Important dimensional standards are indicated in the following charts.
Screw-Catch™ feature speeds mounting our thermoplastic wallplates by holding mounting screws in place.
O-Intro
-
2
WALLPLATES
INDUSTRIAL COMMERCIAL INSTITUTIONAL
Wallplates
Our entire line of type 304 stainless steel wallplates, with their superior non-corrosive (better than type 302) and nonmagnetic properties, are best suited for all specifications desiring protection from either of these damaging elements.
Contains 18% chromium, 8% nickel stainless steel alloy, stamped from 0.032” (0.81mm) horizontally satin-brushed material for out­standing surface finish and long-life durability. Available in standard, mid-size and oversize configurations. UL listed, CSA certified.
Our extensive line uses tough, rigid impact-
resistant thermoplastic material that provides superior resistance to impact and abrasions.
Rugged construction reduces installation
cost due to less plate breakage and resists bowing to provide a smooth, flat installation.
Entire line offers our timesaving
Screw-Catch™ feature (see adjoining illustration) that secures mounting screws and simplifies installation.
Available in standard, mid-size and oversize.
Configurations available in 10 colors: white,
ivory, almond, light almond, gray, brown, black, blue, red and orange.
High gloss finish is soil resistant.
UL listed, CSA certified charts.
304 Stainless Steel Wallplates
Thermoplastic Wallplates
93071
2151
Extensive line of non-flammable thermoset
plates provides flush-fitting, warp-resistant performance.
Available in standard, mid-size and oversize.
Configurations available in 7 colors: white,
ivory, almond, light almond, gray, brown and black.
UL listed, CSA certified.
Line of handsomely crafted elegant solid
brass designs in 11 popular NEMA, standard size configurations.
Strong, corrosion-resistant and coated with
transparent lacquer to resist premature oxidation.
Configurations available in two distinct
finishes – satin and polished.
UL listed, CSA certified.
Thermoset Wallplates
Brass Wallplates
5132
94091
O-Intro
-
3
WALLPLATES
INDUSTRIAL COMMERCIAL INSTITUTIONAL
Wallplates
Dimensions
Mounting Holes for Wallplates and Covers
These are the most common nominal spacings for mounting holes for wallplates and covers.
Holes are normally countersunk for oval head
6-32 screws.
Dimensions
Plate and Cover Openings “A”
Nominal dimensions for plate and cover openings conform to industry standards and practices.
Below are several popular configurations.
Plate and Cover Openings “B”
2.375" (60.325mm)
Device or Strap
3.81" (96.77mm)
Decorator/GFCI
Box
1.375" (34.93mm)
FS Box
3.281" (83.34mm)
3.25" (82.55mm)
2.469" (61.73mm)
4-Wire Power
2.156" (54.76mm)
Off Center Power
.406"
(10.32mm)
.938" (23.81mm)
Toggle
.672"
(17.07mm)
.906" (23.02mm)
Interchange
2.156"
3-Wire Power
.766"
(19.45mm)
(54.76mm)
1.313"
(33.35mm)
Decorator
1.313"
(33.35mm)
Duplex
1.59" (40.46mm)
Single Locking Receptacle 20/30 AMP
2.641" (67.08mm)
2.656" (67.46mm)
1.41" (35.7mm)
Single Receptacle
O-Intro
-
4
WALLPLATES
INDUSTRIAL COMMERCIAL INSTITUTIONAL
Plate Sizes
Wallplates
First Gang Gang
Description Height Length to Edge to Gang
1 Gang Standard 4.50" 2.75" 1.375"
(114.3mm) (69.85mm) (34.93mm)
Mid-size 4.875" 3.125" 1.563"
(123.83mm) (79.375mm) (39.70mm)
Oversize 5.25" 3.50" 1.75"
(133.35mm) (88.90mm) (44.45mm)
2 Gang Standard 4.50" 4.563" 1.375" 1.813"
(114.3mm) (115.90mm) (34.93mm) (46.05mm)
Mid-size 4.875" 4.938" 1.563" 1.813"
(123.83mm) (125.43mm) (39.70mm) (46.05mm)
Oversize 5.25” 5.313” 1.75” 1.813”
(133.35mm) (134.95mm) (44.45mm) (46.05mm)
3 Gang Standard 4.50” 6.375” 1.375” 1.813”
(114.3mm) (161.93mm) (34.93mm) (46.05mm)
Mid-size 4.875” 6.75” 1.563” 1.813”
(123.83mm) (171.45mm) (39.70mm) (46.05mm)
Oversize 5.25” 7.172” 1.75” 1.813”
(133.35mm) (182.17mm) (44.45mm) (46.05mm)
4 Gang Standard 4.50” 8.188” 1.375” 1.813”
(114.3mm) (207.98mm) (34.93mm) (46.05mm)
Mid-size 4.875” 8.563” 1.563” 1.813”
(123.83mm) (217.50mm) (39.70mm) (46.05mm)
Oversize 5.25” 8.938” 1.75” 1.813”
(133.35mm) (227.03mm) (44.45mm) (46.05mm)
5 Gang Standard 4.50” 10” 1.375” 1.813”
(114.3mm) (254.0mm) (34.93mm) (46.05mm)
Mid-size 4.875” 10.375” 1.563” 1.813”
(123.83mm) (263.53mm) (39.70mm) (46.05mm)
6 Gang Standard 4.50” 11.813” 1.375” 1.813”
(114.3mm) (300.05mm) (34.93mm) (46.05mm)
Mid-size 4.875” 12.188” 1.563” 1.813”
(123.83mm) (309.58mm) (39.70mm) (46.05mm)
Oversize
1.75" (44.45mm)
1.813'' (46.05mm)
5.313'' (134.95mm)
5.25'' (133.35mm)
Standard
1.375" (34.93mm)
1.813'' (46.05mm)
Oversize
Mid-size
2.75'' (69.85mm)
3.125'' (79.375mm)
3.50'' (88.90mm)
11.813'' (300.05mm)
Standard
4.50'' (114.3mm)
4.875'' (123.83mm)
5.25'' (133.35mm)
4.50'' (114.3mm)
O-1
WALLPLATES
INDUSTRIAL COMMERCIAL INSTITUTIONAL
TESTING & CODE COMPLIANCE
• UL Listed, UL File #E32003
• Meets current Federal Specifications as tested to UL 514
• Meets all CSA requirements, C22.2 no. 42.1; CSA file # 9294 (4413-02).
MATERIAL CHARACTERISTICS
Type 304 Stainless Steel, non-magnetic,
0.032" (0.81mm) nominal thickness, satin finish. This alloy contains 18% chromium and 8% nickel for superior corrosion resistance.
Industrial Specification Grade Stainless Steel Wallplates
Brushed satin finish resists finger marks.
Matching stainless steel mounting
screws provided.
FEATURES
All wallplates are of type 304 stainless steel
alloy for superior non-magnetic corrosion­resistant properties.
Plates are 0.032" (0.81mm) thick.
Industrial Stainless Steel
Standard Size
Toggle Switch
Description Catalog No.
1 Gang 93071
2 Gang 93072
3 Gang 93073
4 Gang 93074
5 Gang 93075
6 Gang 93076
Receptacle
Description Catalog No.
1 Gang Single with 1.40" (35.56mm) Hole 93091
1 Gang with 1.60" (40.64mm) Hole for Single Locking 93111 (20/30A Locking Receptacle)
1 Gang Duplex 93101
O-2
WALLPLATES
TESTING & CODE COMPLIANCE
• UL Listed, UL File #E32003
• Meets current Federal Specifications as tested to UL 514
• Meets all CSA requirements, C22.2 no. 42.1; CSA file # 9294 (4413-02).
MATERIAL CHARACTERISTICS
Type 304 Stainless Steel, non-magnetic,
0.032" (0.81mm) nominal thickness, satin finish. This alloy contains 18% chromium and 8% nickel for superior corrosion resistance.
INDUSTRIAL COMMERCIAL INSTITUTIONAL
Industrial Specification Grade Stainless Steel Wallplates
Industrial Stainless Steel
FEATURES
All wallplates are of type 304 stainless steel
alloy for superior non-magnetic corrosion­resistant properties.
Plates are 0.032" (0.81mm) thick.
Standard Size
Brushed satin finish resists finger marks.
Matching stainless steel mounting
screws provided.
Receptacle
Description Catalog No.
2 Gang Duplex 93102
3 Gang Duplex 93103
Decorator
Description Catalog No.
1 Gang 93401
2 Gang 93402
3 Gang 93403
4 Gang 93404
5 Gang 93405
6 Gang 93406
Industrial Specification Grade Stainless Steel Wallplates
Industrial Stainless Steel
O-3
WALLPLATES
TESTING & CODE COMPLIANCE
• UL Listed, UL File #E32003
• Meets current Federal Specifications as tested to UL 514
• Meets all CSA requirements, C22.2 no. 42.1; CSA file # 9294 (4413-02).
MATERIAL CHARACTERISTICS
Type 304 Stainless Steel, non-magnetic,
0.032" (0.81mm) nominal thickness, satin finish. This alloy contains 18% chromium and 8% nickel for superior corrosion resistance.
INDUSTRIAL COMMERCIAL INSTITUTIONAL
Brushed satin finish resists finger marks.
Matching stainless steel mounting
screws provided.
FEATURES
All wallplates are of type 304 stainless steel
alloy for superior non-magnetic corrosion­resistant properties.
Plates are 0.032" (0.81mm) thick.
Power Receptacle
Description Catalog No.
1 Gang with 2.1563" (54.76mm) Hole (for 3 Wire Receptacle) 93221
2 Gang with 2.1563" (54.76mm) Hole (for 3 Wire Receptacle) 93227
2 Gang with 2.2813" (57.94mm) Hole 93228
2 Gang with 2.4688" (62.71mm) Hole (for 4 Wire Receptacle) 93223
Blank – Box Mounted
Description Catalog No.
1 Gang Blank 93151
2 Gang Blank 93152
3 Gang Blank 93153
4 Gang Blank 93154
O-4
WALLPLATES
INDUSTRIAL COMMERCIAL INSTITUTIONAL
TESTING & CODE COMPLIANCE
• UL Listed, UL File #E32003
• Meets current Federal Specifications as tested to UL 514
• Meets all CSA requirements, C22.2 no. 42.1; CSA file # 9294 (4413-02).
MATERIAL CHARACTERISTICS
Type 304 Stainless Steel, non-magnetic,
0.032" (0.81mm) nominal thickness, satin finish. This alloy contains 18% chromium and 8% nickel for superior corrosion resistance.
Industrial Specification Grade Stainless Steel Wallplates
Standard Size
FEATURES
All wallplates are of type 304 stainless steel
alloy for superior non-magnetic, corrosion­resistant properties.
Plates are 0.032" (0.81mm) thick.
Brushed satin finish resists finger marks.
Matching stainless steel mounting
screws provided.
Combination
Description Catalog No.
2 Gang – Toggle and Single Receptacle 93512
2 Gang – Toggle and Duplex Receptacle 93532
2 Gang – Toggle and Decorator 93432
3 Gang – 2 Toggles and Duplex Receptacle 93543
3 Gang – 2 Toggles and Decorator 93443
4 Gang – 3 Toggles and Duplex Receptacle 93554
Telephone and Coaxial Opening — Box Mounted
Description Catalog No.
1 Gang with 0.375" (9.53mm) opening, includes grommet 93696 to close to 0.406" (10.31mm)
1 Gang with 0.625" (15.87mm) opening, includes grommet 93591 to close to 0.406" (10.31mm)
Louver
Description Catalog No.
1 Gang – Horizontal 93630
1 Gang – Vertical 93631
Industrial Stainless Steel
Loading...
+ 20 hidden pages