Arrow Hart - Cooper Wiring Devices Support Grips SD Series Catalog Page

Support Grips SD Series

APPLICATIONS

■ Light-duty support of all types of suspended

service cables indoor or outdoor.

Service Drops
Standard Duty
Single Eye and
Universal Bail

Single Eye, Standard Duty

■ Service entrance, cable TV, telephone,

fiber optics in sloping, vertical and
horizontal positions.

FEATURES

■ Gripping action increases in direct proportion

to the amount of tension applied to cable.

■ Single weave variable mesh construction.

■ Wire mesh is produced from high quality,

non-magnetic, tin coated bronze which
provides superior corrosion resistance.

■ Stainless steel support grips and

special lengths are available upon
request. Consult factory.

■ Available in cable ranges from 0.23"-

1.25" (.58-3.18cm) and mesh lengths
up to 9.5" (24.13cm).

E = Eye length M = Mesh length at nominal diameter

Universal Eye, Standard Duty

Cable Range Approx. Break Length in Inches (cm)
Inches (cm) Strength Lbs. (N) E M Catalog No.

.23-.31 (.58-.79) 290 (1,290) 4 (20.32) 3.75 (9.53) SDS23

.32-.43 (.81-1.09) 290 (1,290) 4 (20.32) 4.25 (10.80) SDS32

.43-.56 (1.09-1.42) 380 (1,690) 6 (15.24) 5 (12.70) SDS43

.56-.73 (1.42-1.85) 600 (2,669) 7 (17.78) 6 (15.24) SDS56

.73-.85 (1.85-2.16) 790 (3,514) 7 (17.78) 6.75 (17.15) SDS73

.85-1.00 (2.16-2.54) 1,020 (4,537) 8 (20.32) 8 (20.32) SDS85

1.00-1.25 (2.54-3.18) 1,020 (4.537) 9 (22.86) 9.5 (24.13) SDS100

Caution:

Never use grips to approximate breaking strength. Refer to Wire Mesh Grips

Introduction for safety and working load factors.

Cable Range Approx. Break Length in Inches (cm)
Inches (cm) Strength Lbs. (N) E M Catalog No.

.23-.31 (.58-.79) 290 (1,290) 8 (20.32) 3.75 (9.53) SDU23

.32-.43 (.81-1.09) 290 (1,290) 10 (25.4) 4.25 (10.80) SDU32

.43-.56 (1.09-1.42) 380 (1,690) 12 (30.48) 5 (12.70) SDU43

.56-.73 (1.42-1.85) 600 (2,669) 13 (33.02) 6 (15.24) SDU56

.73-.85 (1.85-2.16) 790 (3,514) 14 (35.56) 6.75 (17.15) SDU73

.85-1.00 (2.16-2.54) 1,020 (4,537) 14 (35.56) 8 (20.32) SDU85

1.00-1.25 (2.54-3.18) 1,020 (4.537) 15 (38.10) 9.5 (24.13) SDU100

Support Grips SD Series

Single Eye,

Standard Duty

Universal Eye,
Standard Duty

Q-21

WIRE MESH
GRIPS

INDUSTRIAL