Arrow Hart - Cooper Wiring Devices Support Grips R Series Catalog Page

Q-23

WIRE MESH
GRIPS

INDUSTRIAL

Support Grips R Series

Conduit Riser Grips
Closed Mesh, Lace Closing
Rod Closing

APPLICATIONS

■ Standard and heavy-duty applications indoors

and outdoors.

■ Used to support vertically hung cable in schedule

40 conduit when cable end is available.

■ Reduces cable creepage in the conduit.

■ Building and pole risers, underground cable lines,

any application where ring termination is practical.

■ Closed mesh for permanent support when

the cable end is available.

■ Rod closing for temporary support when

cable end is not available. Lace closing
for permanent support when cable end
is not available.

FEATURES

■ Gripping action increases in direct proportion

to the amount of tension applied to cable.

■ Fast and easy to install, requiring no special tools.

■ Single weave mesh is produced from high

quality, non-magnetic, tin coated bronze which
provides superior corrosion resistance.

■ Grip is fastened to a rugged brass support ring

which seats on the rim of the conduit and
requires no other hardware for a secure
installation.

■ Stainless steel support grips, double

weave construction and special lengths
available upon request. Consult factory.

■ Closed mesh available for conduit sizes

ranging from 0.75" thru 6" (1.91-15.24cm)
and cable diameters ranging from 0.50"-

3.99" (1.27-10.13cm). Lace and Rod
closing available for conduit sizes from

1.25" (3.18cm) thru 6" (15.24cm)
and cable diameters ranging from

0.75" - 3.99" (1.91-10.13cm).

Standard Duty, Closed Mesh

Standard Duty,

Closed Mesh

Caution:

Never use grips to approximate breaking strength. Refer to Wire Mesh Grips

Introduction for safety and working load factors.

Cable Range Conduit Approx. Break Mesh Length
Inches (cm) Dia. Inches Strength Lbs. (N) Inches (cm) Catalog No.

.50-.62 (1.27-1.57) 3/4 290-530 (1,290-2,357) 8 (20.32) R250

.50-.62 (1.27-1.57) 1 290-530 (1,290-2,357) 8 (20.32) R350

.50-.62 (1.27-1.57) 1 1/4 290-530 (1,290-2,357) 8 (20.32) R450

.50-.62 (1.27-1.57) 1 1/2 290-530 (1,290-2,357) 8 (20.32) R550

.50-.62 (1.27-1.57) 2 290-530 (1,290-2,357) 8 (20.32) R650

.50-.62 (1.27-1.57) 2 1/2 290-530 (1,290-2,357) 8 (20.32) R750

.50-.62 (1.27-1.57) 3 290-530 (1,290-2,357) 8 (20.32) R850

.63-.74 (1.60-1.88) 1 435-790 (1,935-3,514) 9 (22.86) R363

.63-.74 (1.60-1.88) 1 1/4 435-790 (1,935-3,514) 9 (22.86) R463

.63-.74 (1.60-1.88) 1 1/2 435-790 (1,935-3,514) 9 (22.86) R563

.63-.74 (1.60-1.88) 2 435-790 (1,935-3,514) 9 (22.86) R663

.63-.74 (1.60-1.88) 2 1/2 435-790 (1,935-3,514) 9 (22.86) R763

.63-.74 (1.60-1.88) 3 435-790 (1,935-3,514) 9 (22.86) R863

.63-.74 (1.60-1.88) 3 1/2 435-790 (1,935-3,514) 9 (22.86) R963

.63-.74 (1.60-1.88) 4 435-790 (1,935-3,514) 9 (22.86) R1063

.75-.99 (1.91-2.51) 1 1/4 560-1,030 (2,491-4,581) 10 (25.4) R475

.75-.99 (1.91-2.51) 1 1/2 560-1,030 (2,491-4,581) 10 (25.4) R575

.75-.99 (1.91-2.51) 2 560-1,030 (2,491-4,581) 10 (25.4) R675

.75-.99 (1.91-2.51) 2 1/2 560-1,030 (2,491-4,581) 10 (25.4) R775

.75-.99 (1.91-2.51) 3 560-1,030 (2,491-4,581) 10 (25.4) R875

.75-.99 (1.91-2.51) 3 1/2 560-1,030 (2,491-4,581) 10 (25.4) R975

.75-.99 (1.91-2.51) 4 560-1,030 (2,491-4,581) 10 (25.4) R1075

.75-.99 (1.91-2.51) 4 1/2 560-1,030 (2,491-4,581) 10 (25.4) R1175

.75-.99 (1.91-2.51) 5 560-1,030 (2,491-4,581) 10 (25.4) R1275

.75-.99 (1.91-2.51) 6 560-1,030 (2,491-4,581) 10 (25.4) R1475

1.00-1.24 (2.54-3.15) 1 1/2 890-1,610 (3,959-7,161) 11 (27.94) R5100

1.00-1.24 (2.54-3.15) 2 890-1,610 (3,959-7,161) 11 (27.94) R6100

Support Grips R Series

Q-24

WIRE MESH
GRIPS

INDUSTRIAL

Support Grips R Series

Standard Duty, Closed Mesh (continued)

Cable Range Conduit Approx. Break Mesh Length
Inches (cm) Dia. Inches Strength Lbs. (N) Inches (cm) Catalog No.

1.00-1.24 (2.54-3.15) 2 1/2 890-1,610 (3,959-7,161) 11 (27.94) R7100

1.00-1.24 (2.54-3.15) 3 890-1,610 (3,959-7,161) 11 (27.94) R8100

1.00-1.24 (2.54-3.15) 3 1/2 890-1,610 (3,959-7,161) 11 (27.94) R9100

1.00-1.24 (2.54-3.15) 4 890-1,610 (3,959-7,161) 11 (27.94) R10100

1.00-1.24 (2.54-3.15) 4 1/2 890-1,610 (3,959-7,161) 11 (27.94) R11100

1.00-1.24 (2.54-3.15) 5 890-1,610 (3,959-7,161) 11 (27.94) R12100

1.00-1.24 (2.54-3.15) 6 890-1,610 (3,959-7,161) 11 (27.94) R14100

1.25-1.49 (3.18-3.78) 2 890-1,610 (3,959-7,161) 12 (30.48) R6125

1.25-1.49 (3.18-3.78) 2 1/2 890-1,610 (3,959-7,161) 12 (30.48) R7125

1.25-1.49 (3.18-3.78) 3 890-1,610 (3,959-7,161) 12 (30.48) R8125

1.25-1.49 (3.18-3.78) 3 1/2 890-1,610 (3,959-7,161) 12 (30.48) R9125

1.25-1.49 (3.18-3.78) 4 890-1,610 (3,959-7,161) 12 (30.48) R10125

1.25-1.49 (3.18-3.78) 4 1/2 890-1,610 (3,959-7,161) 12 (30.48) R11125

1.25-1.49 (3.18-3.78) 5 890-1,610 (3,959-7,161) 12 (30.48) R12125

1.25-1.49 (3.18-3.78) 6 890-1,610 (3,959-7,161) 12 (30.48) R14125

1.50-1.74 (3.81-4.42) 2 1/2 890-1,610 (3,959-7,161) 13 (33.02) R7150

1.50-1.74 (3.81-4.42) 3 890-1,610 (3,959-7,161) 13 (33.02) R8150

1.50-1.74 (3.81-4.42) 3 1/2 890-1,610 (3,959-7,161) 13 (33.02) R9150

1.50-1.74 (3.81-4.42) 4 890-1,610 (3,959-7,161) 13 (33.02) R10150

1.50-1.74 (3.81-4.42) 4 1/2 890-1,610 (3,959-7,161) 13 (33.02) R11150

1.50-1.74 (3.81-4.42) 5 890-1,610 (3,959-7,161) 13 (33.02) R12150

1.50-1.74 (3.81-4.42) 6 890-1,610 (3,959-7,161) 13 (33.02) R14150

1.75-1.99 (4.45-5.05) 2 1/2 1,180-2,150 (5,249-9,563) 14 (35.56) R7175

1.75-1.99 (4.45-5.05) 3 1,180-2,150 (5,249-9,563) 14 (35.56) R8175

1.75-1.99 (4.45-5.05) 3 1/2 1,180-2,150 (5,249-9,563) 14 (35.56) R9175

1.75-1.99 (4.45-5.05) 4 1,180-2,150 (5,249-9,563) 14 (35.56) R10175

1.75-1.99 (4.45-5.05) 4 1/2 1,180-2,150 (5,249-9,563) 14 (35.56) R11175

1.75-1.99 (4.45-5.05) 5 1,180-2,150 (5,249-9,563) 14 (35.56) R12175

1.75-1.99 (4.45-5.05) 6 1,180-2,150 (5,249-9,563) 14 (35.56) R14175

2.00-2.49 (5.08-6.32) 3 1,795-3,260 (7,984-14,500) 17 (43.18) R8200

2.00-2.49 (5.08-6.32) 3 1/2 1,795-3,260 (7,984-14,500) 17 (43.18) R9200

2.00-2.49 (5.08-6.32) 4 1,795-3,260 (7,984-14,500) 17 (43.18) R10200

2.00-2.49 (5.08-6.32) 4 1/2 1,795-3,260 (7,984-14,500) 17 (43.18) R11200

2.00-2.49 (5.08-6.32) 5 1,795-3,260 (7,984-14,500) 17 (43.18) R12200

2.00-2.49 (5.08-6.32) 6 1,795-3,260 (7,984-14,500) 17 (43.18) R14200

2.50-2.99 (6.35-7.59) 3 1/2 1,795-3,260 (7,984-14,500) 18 (45.72) R9250

2.50-2.99 (6.35-7.59) 4 1,795-3,260 (7,984-14,500) 18 (45.72) R10250

2.50-2.99 (6.35-7.59) 4 1/2 1,795-3,260 (7,984-14,500) 18 (45.72) R11250

2.50-2.99 (6.35-7.59) 5 1,795-3,260 (7,984-14,500) 18 (45.72) R12250

2.50-2.99 (6.35-7.59) 6 1,795-3,260 (7,984-14,500) 18 (45.72) R14250

3.00-3.49 (7.62-8.86) 4 2,245-4,080 (9,986-18,148) 20 (50.80) R10300

3.00-3.49 (7.62-8.86) 4 1/2 2,245-4,080 (9,986-18,148) 20 (50.80) R11300

3.00-3.49 (7.62-8.86) 5 2,245-4,080 (9,986-18,148) 20 (50.80) R12300

3.00-3.49 (7.62-8.86) 6 2,245-4,080 (9,986-18,148) 20 (50.80) R14300

3.50-3.99 (8.89-10.13) 4 1/2 2,245-4,080 (9,986-18,148) 21 (53.34) R11350

3.50-3.99 (8.89-10.13) 5 2,245-4,080 (9,986-18,148) 21 (53.34) R12350

3.50-3.99 (8.89-10.13) 6 2,245-4,080 (9,986-18,148) 21 (53.34) R14350