Arrow Hart - Cooper Wiring Devices Support grips Catalog Page

N

SECTION

SGOR63

Support grips

Standard duty

Product description

Split rod
Offset eye & locking bale grips

Features & applications

•

Split rod support grips are used when the
end of the cable cannot be easily accessed
and the installation is temporary

•

Designed for loads up to 600 lbs. and vertical
runs of no more than 100 ft.

•

Wire mesh is produced from high quality,
non-magnetic, tin coated bronze which
provides superior corrosion resistance

•

Support grips will hold more than one cable

•

Absorbs additional strain from vibration, expansion,
contraction and flexing

•

They are available in a variety of eye styles and cable
ranges for supporting electrical and fiber optic cable,
metal rods and tubing

•

Offset eye for use when offset positioning is required

•

Locking bale attachment fits around beam or pipe and
can be locked in place

SGUR100

Offset eye

Cord Approx.
diameter Bale length Mesh length break strength

0.50-0.61" (12.7-15.5mm) 4" (101.6mm) 11" (279.4mm) 770 lbs. SGOR50 •

0.62-0.74" (16.0-18.8mm) 4" (101.6mm) 11" (279.4mm) 960 lbs. SGOR63 •

0.75-0.99" (19.1-25.1mm) 4" (101.6mm) 14" (355.6mm) 960 lbs. SGOR75 •

1.00-1.24" (28.4-31.5mm) 5" (127.0mm) 15" (381.0mm) 1,680 lbs. SGOR100 •

1.25-1.49" (31.8-37.9mm) 5" (127.0mm) 16" (406.4mm) 1,680 lbs. SGOR125 •

1.50-1.74" (38.1-44.2mm) 5" (127.0mm) 18" (457.2mm) 1,680 lbs. SGOR150 •

1.75-1.99" (44.5-50.5mm) 6" (152.4mm) 20" (508.0mm) 2,640 lbs. SGOR175 •

2.00-2.49" (50.8-63.2mm) 6" (152.4mm) 22" (558.8mm) 3,760 lbs. SGOR200 •

2.50-2.99" (63.5-75.9mm) 8" (203.2mm) 24" (609.6mm) 3,760 lbs. SGOR250 •

3.00-3.49" (76.2-88.6mm) 9" (228.6mm) 26" (660.4mm) 5,040 lbs. SGOR300 •

3.50-3.99" (88.9-101.3mm) 9" (228.6mm) 28" (711.2mm) 5,040 lbs. SGOR350 •

†

Catalog no.*

Locking bale grips

Cord Approx.
diameter Bale length Mesh length break strength

0.50-0.61" (12.7-15.5mm) 18" (457.2mm) 11" (279.4mm) 770 lbs. SGUR50 •

0.63-0.74" (16.0-18.8mm) 18" (457.2mm) 11" (279.4mm) 1,150 lbs. SGUR63 •

0.75-0.99" (19.1-25.1mm) 18" (457.2mm) 14" (355.6mm) 1,320 lbs. SGUR75 •

1.00-1.24" (28.4-31.5mm) 18" (457.2mm) 15" (381.0mm) 1,920 lbs. SGUR100 •

1.25-1.49" (31.8-37.9mm) 18" (457.2mm) 16" (406.4mm) 1,920 lbs. SGUR125 •

1.50-1.74" (38.1-44.2mm) 18" (457.2mm) 18" (457.2mm) 1,920 lbs. SGUR150 •

1.75-1.99" (44.5-50.5mm) 18" (457.2mm) 20" (508.0mm) 3,150 lbs. SGUR175 •

2.00-2.49" (50.8-63.2mm) 18" (457.2mm) 22" (558.8mm) 3,360 lbs. SGUR200 •

2.50-2.99" (63.5-75.9mm) 18" (457.2mm) 24" (609.6mm) 3,360 lbs. SGUR250 •

3.00-3.49" (76.2-88.6mm) 18" (457.2mm) 26" (660.4mm) 5,280 lbs. SGUR300 •

3.50-3.99" (88.9-101.3mm) 18" (457.2mm) 28" (711.2mm) 5,280 lbs. SGUR350 •

†

Catalog no.*

*Contact the factory for stainless steel support grips.
† To determine workload safety factor, divide approximate break strength by 10. See page N-34 for strength information.
Consult factory for price and availability.

Compliances, specifications and availability are subject to change without notice.

Indicates NAFTA compliant - Page Q-30