Arrow Hart - Cooper Wiring Devices Pulling Grips SK Series Catalog Page

Cable Range Approx. Break Length in Inches (cm)
Inches (cm) Strength Lbs. (N) E M Catalog No.

.75-.99 (1.91-2.51) 2,600 (11,565) 7 (17.78) 12 (30.48) SKT7512

.75-.99 (1.91-2.51) 2,600 (11,565) 7 (17.78) 20 (50.80) SKT7520

1.00-1.24 (2.54-3.15) 4,000 (17,792) 8 (20.32) 15 (38.1) SKT10015

1.00-1.24 (2.54-3.15) 4,000 (17,792) 8 (20.32) 20 (50.80) SKT10020

1.25-1.49 (3.18-3.78) 5,400 (24,019) 8 (20.32) 16 (40.64) SKT12516

1.25-1.49 (3.18-3.78) 5,400 (24,019) 8 (20.32) 23 (58.42) SKT12523

1.50-1.74 (3.81-4.42) 6,600 (29,357) 9 (22.86) 17 (43.18) SKT15017

1.50-1.99 (3.81-5.05) 10,000 (44,480) 9 (22.86) 25 (63.50) SKT15025

1.75-1.99 (4.45-5.05) 10,000 (44,480) 10 (25.4) 18 (45.72) SKT17518

2.00-2.49 (5.08-6.32) 11,000 (48,928) 10 (25.4) 19 (48.26) SKT20019

2.00-2.49 (5.08-6.32) 11,000 (48,928) 10 (25.4) 26 (66.04) SKT20026

2.50-2.99 (6.35-7.59) 11,000 (48,928) 10 (25.4) 20 (50.80) SKT25020

2.50-2.99 (6.35-7.59) 11,000 (48,928) 10 (25.4) 29 (73.66) SKT25029

3.00-3.49 (7.62-8.86) 14,500 (64,496) 12 (30.48) 21 (53.34) SKT30021

3.00-3.49 (7.62-8.86) 14,500 (64,496) 12 (30.48) 32 (81.28) SKT30032

3.50-3.99 (8.89-10.13) 14,500 (64,496) 12 (30.48) 22 (55.88) SKT35022

3.50-3.99 (8.89-10.13) 14,500 (64,496) 12 (30.48) 35 (88.90) SKT35035

Pulling Grips SK Series

Slack
Offset Eye
Closed Mesh

Q-32

WIRE MESH
GRIPS

INDUSTRIAL

APPLICATIONS

■ Dependable, reusable tool for pulling slack for

final placement of underground cable after it
has been pulled and for removing old cable.

■ Used in factory maintenance and construction,

utility work and replacement of underground cable.

Offset Eye, Standard Duty

Offset Eye, Heavy Duty

■ Used when cable end is accessible.

■ Standard length, single weave used

when working in restricted space;
standard and long length, double weave
when space is not restricted and pulling
loads are higher.

FEATURES

■ Fast, easy, safe installation and removal,

no special tools required.

■ Optional weave and length designs available.

■ High strength galvanized steel wire mesh.

■ Single offset eye easily mates to swivel

and line type connectors as well as
easy attachment to pull line.

E = Eye length M = Mesh length at nominal diameter

Offset Eye,
Heavy Duty

Caution:

Never use grips to approximate breaking strength. Refer to Wire Mesh Grips

Introduction for safety and working load factors.

Cable Range Approx. Break Length in Inches (cm)
Inches (cm) Strength Lbs. (N) E M Catalog No.

.50-.61 (1.27-1.55) 1,000 (4,448) 6 (15.24) 11 (27.94) SK5011

.62-.74 (1.57-1.88) 1200 (5,338) 6 (15.24) 12 (30.48) SK6212

.75-.99 (1.91-2.51) 1,750 (7,784) 7 (17.78) 12 (30.48) SK7512

1.00-1.24 (2.54-3.15) 2,500 (11,120) 8 (20.32) 15 (38.1) SK10015

1.25-1.49 (3.18-3.78) 2,500 (11,120) 8 (20.32) 16 (40.64) SK12516

1.50-1.74 (3.81-4.42) 3,000 (13,344) 9 (22.86) 17 (43.18) SK15017

1.75-1.99 (4.45-5.05) 3,500 (15,568) 10 (25.4) 18 (45.72) SK17518

2.00-2.49 (5.08-6.32) 5,000 (22,240) 10 (25.4) 19 (48.26) SK20019

2.50-2.99 (6.35-7.59) 5,000 (22,240) 10 (25.4) 20 (50.80) SK25020

3.00-3.49 (7.62-8.86) 8,000 (35,584) 12 (30.48) 21 (53.34) SK30021

3.50-3.99 (8.89-10.13) 8,000 (35,584) 12 (30.48) 22 (55.88) SK35022

Pulling Grips SK Series

Q-33

WIRE MESH
GRIPS

INDUSTRIAL

Pulling Grips SK Series

Slack
Offset Eye
Lace Closing
and Rod Closing

APPLICATIONS

■ Dependable, reusable tool for pulling up slack

where cable is in service.

■ Used when cable end is not accessible.

Offset Eye, Heavy Duty, Lace Closing

Offset Eye, Standard Duty, Rod Closing

■ Used in factory maintenance and

construction, utility work and
replacement of underground cable.

FEATURES

■ Fast, easy, safe installation and removal,

no special tools required.

■ Single offset eye easily mates to swivel

and line type connectors.

■ Easy attachment to pull line.

■ High strength galvanized steel wire

mesh.

■ Available in standard length, double

weave, lace closing; standard length,
single weave, and rod closing.

E = Eye length M = Mesh length at nominal diameter

Caution:

Never use grips to approximate breaking strength. Refer to Wire Mesh Grips

Introduction for safety and working load factors.

Cable Range Approx. Break Length in Inches (cm)
Inches (cm) Strength Lbs. (N) E M Catalog No.

.75-.99 (1.91-2.51) 2,500 (11,120) 7 (17.78) 12 (30.48) SKTL7512

1.00-1.24 (2.54-3.15) 3,500 (15,569) 8 (20.32) 15 (38.1) SKTL10015

1.25-1.49 (3.18-3.78) 4,000 (17,794) 8 (20.32) 16 (40.64) SKTL12516

1.50-1.74 (3.81-4.42) 4,000 (17,794) 9 (22.86) 17 (43.18) SKTL15017

1.75-1.99 (4.45-5.05) 4,000 (17,794) 10 (25.4) 18 (45.72) SKTL17518

2.00-2.49 (5.08-6.32) 4,000 (17,794) 10 (25.4) 19 (48.26) SKTL20019

2.50-2.99 (6.35-7.59) 4,000 (17,794) 10 (25.4) 20 (50.80) SKTL25020

3.00-3.49 (7.62-8.86) 4,000 (17,794) 12 (30.48) 21 (53.34) SKTL30021

3.49-3.99 (8.86-10.13) 4,000 (17,794) 12 (30.48) 22 (55.88) SKTL35022

Cable Range Approx. Break Length in Inches (cm)
Inches (cm) Strength Lbs. (N) E M Catalog No.

.50-.61 (1.27-1.55) 1,500 (6,673) 7 (17.78) 6 (15.24) SKR506

.62-.74 (1.57-1.88) 1,800 (8,007) 7 (17.78) 8 (20.32) SKR628

.75-.99 (1.91-2.51) 2,200 (9,786) 7 (17.78) 10 (25.4) SKR7510

1.00-1.24 (2.54-3.15) 3,400 (15,125) 8 (20.32) 12 (30.48) SKR10012

1.25-1.49 (3.18-3.78) 4,500 (20,018) 8 (20.32) 14 (35.56) SKR12514

1.50-1.74 (3.81-4.42) 5,800 (25,801) 9 (22.86) 15 (38.1) SKR15015

1.75-1.99 (4.45-5.05) 7,600 (33,808) 10 (25.4) 16 (40.64) SKR17516

2.00-2.49 (5.08-6.32) 9,000 (40,036) 10 (25.4) 19 (48.26) SKR20019

2.50-2.99 (6.35-7.59) 11,000 (48,932) 10 (25.4) 20 (50.80) SKR25020

3.00-3.49 (7.62-8.86) 12,000 (53,381) 12 (30.48) 21 (53.34) SKR30021

3.50-3.99 (8.89-10.13) 12,000 (53,381) 12 (30.48) 24 (60.96) SKR35024

Pulling Grips SK Series

Offset Eye,

Heavy Duty,

Lace Closing

Offset Eye,

Standard Duty,

Rod Closing