Arrow Hart - Cooper Wiring Devices Pulling Grips LP Series Catalog Page

Flexible Eye,

Light Duty

Pulling Grips LP Series

Light Duty
Flexible Eye

Q-30

WIRE MESH
GRIPS

INDUSTRIAL

APPLICATIONS

■ Dependable, reusable tool.

■ Used in industrial plants, commercial

buildings, utility work and light-duty
underground transmission line stringing.

Flexible Eye, Light Duty

■ Light-duty grips designed for use in

general underground construction
where a grip is needed for light pulls.

FEATURES

■ Fast, easy, safe installation and removal,

no special tools required.

■ High strength galvanized steel strand.

■ Single weave variable mesh automatically adjusts

its grip to the load providing non-slip pulling
and protects cable insulation from damage.

■ Endless weave construction eliminates sharp or

protruding ends that could cause injury and
obstruct passage over sheaves or through conduit.

■ Flexible pulling eye is secured within a

swaged aluminum collar which controls
arc of bend and prevents snagging.

■ Wire reinforcement shoulder protects

cable ends.

E = Eye length M = Mesh length at nominal diameter

Caution:

Never use grips to approximate breaking strength. Refer to Wire Mesh Grips

Introduction for safety and working load factors.

Cable Range Approx. Break Length in Inches (cm)
Inches (cm) Strength Lbs. (N) E M Catalog No.

.50-.61 (1.27-1.55) 2,800 (12,454) 5 (12.7) 11 (27.94) LP5011

.50-.61 (1.27-1.55) 2,800 (12,454) 5 (12.7) 16 (40.64) LP5016

.62-.74 (1.57-1.88) 2,800 (12,454) 5 (12.7) 11 (27.94) LP6211

.62-.74 (1.57-1.88) 2,800 (12,454) 5 (12.7) 16 (40.64) LP6216

.75-.99 (1.91-2.51) 4,000 (17,792) 6 (15.24) 12 (30.48) LP7512

.75-.99 (1.91-2.51) 4,000 (17,792) 6 (15.24) 20 (50.8) LP7520

1.00-1.24 (2.54-3.15) 5,300 (23,574) 7 (17.78) 13 (33.02) LP10013

1.00-1.24 (2.54-3.15) 6,800 (30,246) 7 (17.78) 20 (50.8) LP10020

1.25-1.49 (3.18-3.78) 5,300 (23,574) 7 (17.78) 14 (35.56) LP12514

1.25-1.49 (3.18-3.78) 6,800 (30,246) 7 (17.78) 21 (53.34) LP12521

1.50-1.74 (3.81-4.42) 6,800 (30,246) 8 (20.32) 15 (38.1) LP15015

1.50-1.99 (3.81-5.05) 6,800 (30,246) 8 (20.32) 23 (58.42) LP15023

1.75-1.99 (4.45-5.05) 8,500 (37,808) 8 (20.32) 17 (43.18) LP17517

2.00-2.49 (5.08-6.32) 8,500 (37,808) 9 (22.86) 18 (45.72) LP20018

2.00-2.49 (5.08-6.32) 8,500 (37,808) 9 (22.86) 25 (63.5) LP20025

2.50-2.99 (6.35-7.59) 10,600 (47,149) 9 (22.86) 18 (45.72) LP25018

2.50-2.99 (6.35-7.59) 10,600 (47,149) 9 (22.86) 27 (68.58) LP25027

3.00-3.49 (7.62-8.86) 14,700 (65,386) 10 (25.4) 20 (50.8) LP30020

3.00-3.49 (7.62-8.86) 14,700 (65,386) 10 (25.4) 30 (76.2) LP30030

3.50-3.99 (8.89-10.13) 14,700 (65,386) 10 (25.4) 32 (81.28) LP35032

Pulling Grips LP Series

Q-31

WIRE MESH
GRIPS

INDUSTRIAL

Pulling Grips LP Series

Junior Pulling
Flexible Eye

APPLICATIONS

■ Dependable, reusable tool.

■ Used in industrial plants and commercial

buildings.

Flexible Eye, Junior Pulling

■ Junior pulling grips designed for pulling

insulated building wire through conduit
where pulling tensions are low and to
connect a bundle of insulated building
wire to a pulling tape.

FEATURES

■ Fast, easy, safe installation and removal,

no special tools required.

■ High strength galvanized steel strand.

■ Single weave variable mesh automatically adjusts

its grip to the load providing non-slip pulling
and protects cable insulation from damage.

■ Endless weave construction eliminates sharp

or protruding ends that could cause injury
and obstruct passage over sheaves or
through conduit.

■ Flexible pulling eye is secured within a

swaged aluminum collar which controls
arc of bend and prevents snagging.

■ Wire reinforcement shoulder protects

cable ends.

E = Eye length M = Mesh length at nominal diameter

Caution:

Never use grips to approximate breaking strength. Refer to Wire Mesh Grips

Introduction for safety and working load factors.

Cable Range Approx. Break Length in Inches (cm)
Inches (cm) Strength Lbs. (N) E M Catalog No.

.25-.36 (.64-.91) 450 (2,002) 3.25 (8.26) 4.25 (10.8) LPJ25

.37-.49 (.94-1.24) 900 (4,003) 3.25 (8.26) 7 (17.78) LPJ37

.50-.61 (1.27-1.55) 1,300 (5,782) 4.25 (10.8) 8.5 (21.59) LPJ50

.62-.74 (1.57-1.88) 1,950 (8,674) 5 (12.7) 10 (25.4) LPJ62

.75-.99 (1.91-2.51) 2,800 (12,454) 5.75 (14.61) 10 (25.4) LPJ75

1.00-1.25 (2.54-3.18) 3,900 (17,347) 6.5 (16.51) 11.5 (29.21) LPJ100

KIT Includes (1) each of the following: LPJKIT

LPJ25, LPJ37, LPJ50, LPJ62
LPJ75, LPJ100

Pulling Grips LP Series