Arrow Hart - Cooper Wiring Devices Hospital grade GFCIs Catalog Page

Q-14

WIRE MESH
GRIPS

Support Grips SGH Series

INDUSTRIAL

Standard Duty
Hook Eye
Closed Mesh

APPLICATIONS

■ Standard applications indoors and outdoors

for support and strain relief of vertical runs to
99' (30 M) and loads to 600 lbs (2669 N).

■ Supports the weight of vertically hung cables,

hose, tubing and metal rods.

■ Hook eye for use when cable extends

straight through grip.

■ Closed mesh for permanent support

when the cable end is available. Split
lace closing for permanent support when
the cable end is not available. Split rod
closing for temporary support when the
cable end is not available.

FEATURES

■ Gripping action increases in direct proportion

to the amount of tension applied to cable.

■ Easy to install and remove requiring no special

tools. Can be relocated or repositioned without
any difficulty, saving time and labor.

■ Support grips will hold more than one cable.

■ Single weave mesh with strand equalizers

provides equal loading and permits the cable
to expand and contract without loss of
gripping strength.

■ Wire mesh is produced from high quality,

non-magnetic, tin coated bronze which
provides superior corrosion resistance.

■ Stainless steel support grips and

special lengths are available upon
request. Consult factory.

■ Available in cable ranges from 0.50" -

3.99" (1.27 - 10.13cm) and mesh
lengths up to 27" (67.58cm).

Hook Eye, Closed Mesh

E = Eye length M = Mesh length at nominal diameter

Hook Eye,

Closed Mesh

Caution:

Never use grips to approximate breaking strength. Refer to Wire Mesh Grips

Introduction for safety and working load factors.

Cable Range Approx. Break Length in Inches (cm)
Inches (cm) Strength Lbs. (N) E M Catalog No.

.50-.62 (1.27-1.57) 450 (2002) 10 (25.40) 10 (25.40) SGH50

.62-.74 (1.57-1.88) 750 (3,336) 10 (25.40) 10 (25.40) SGH62

.75-.99 (1.91-2.51) 1000 (4,448) 10 (25.40) 13 (33.02) SGH75

1.00-1.24 (2.54-3.15) 1,400 (6,227) 10 (25.40) 14 (35.56) SGH100

1.25-1.49 (3.18-3.78) 1,400 (6,227) 10 (25.40) 15 (38.10) SGH125

1.50-1.74 (3.81-4.42) 1,400 (6,227) 10 (25.40) 17 (43.18) SGH150

1.75-1.99 (4.45-5.05) 1,600 (7,117) 10 (25.40) 19 (48.26) SGH175

2.00-2.49 (5.08-6.32) 2,200 (9,786) 10 (25.40) 21 (53.34) SGH200

2.50-2.99 (6.35-7.59) 2,200 (9,786) 10 (25.40) 23 (58.42) SGH250

3.00-3.49 (7.62-8.86) 3,200 (14,234) 10 (25.40) 25 (63.50) SGH300

3.50-3.99 (8.89-10.13) 3,200 (14,234) 10 (25.40) 27 (68.58) SGH350

Support Grips SGH Series

Support Grips SGH Series

Q-15

WIRE MESH
GRIPS

INDUSTRIAL

Standard Duty
Hook Eye
Lace Closing, Rod Closing

Hook Eye, Lace Closing

Hook Eye, Rod Closing

E = Eye length M = Mesh length at nominal diameter

Hook, Lace Closing

Hook Eye, Rod Closing

Cable Range Approx. Break Length in Inches (cm)
Inches (cm) Strength Lbs. (N) E M Catalog No.

.50-.62 (1.27-1.57) 750 (3,336) 10 (25.40) 8 1/2 (21.59) SGHL50

.62-.74 (1.57-1.88) 750 (3,336) 10 (25.40) 8 1/2 (21.59) SGHL62

.75-.99 (1.91-2.51) 1,000 (4,448) 10 (25.40) 10 1/2 (26.67) SGHL75

1.00-1.24 (2.54-3.15) 1,400 (6,227) 10 (25.40) 12 1/2 (31.75) SGHL100

1.25-1.49 (3.18-3.78) 1,400 (6,227) 10 (25.40) 14 1/2 (36.83) SGHL125

1.50-1.74 (3.81-4.42) 1,400 (6,227) 10 (25.40) 15 1/2 (39.37) SGHL150

1.75-1.99 (4.45-5.05) 1,600 (7,117) 10 (25.40) 16 1/2 (41.91) SGHL175

2.00-2.49 (5.08-6.32) 2,200 (9,786) 10 (25.40) 19 1/2 (49.53) SGHL200

2.50-2.99 (6.35-7.59) 2,200 (9,786) 10 (25.40) 21 1/2 (54.61) SGHL250

3.00-3.49 (7.62-8.86) 3,200 (14,234) 10 (25.40) 23 1/2 (59.69) SGHL300

3.50-3.99 (8.89-10.13) 3,200 (14,234) 10 (25.40) 25 1/2 (64.77) SGHL350

Cable Range Approx. Break Length in Inches (cm)
Inches (cm) Strength Lbs. (N) E M Catalog No.

.50-.62 (1.27-1.57) 750 (3,336) 10 (25.40) 8 1/2 (21.59) SGHR50

.62-.74 (1.57-1.88) 750 (3,336) 10 (25.40) 8 1/2 (21.59) SGHR62

.75-.99 (1.91-2.51) 1,000 (4,448) 10 (25.40) 10 1/2 (26.67) SGHR75

1.00-1.24 (2.54-3.15) 1,400 (6,227) 10 (25.40) 12 1/2 (31.75) SGHR100

1.25-1.49 (3.18-3.78) 1,400 (6,227) 10 (25.40) 14 1/2 (36.83) SGHR125

1.50-1.74 (3.81-4.42) 1,400 (6,227) 10 (25.40) 15 1/2 (39.37) SGHR150

1.75-1.99 (4.45-5.05) 1,600 (7,117) 10 (25.40) 16 1/2 (41.91) SGHR175

2.00-2.49 (5.08-6.32) 2,200 (9,786) 10 (25.40) 19 1/2 (49.53) SGHR200

2.50-2.99 (6.35-7.59) 2,200 (9,786) 10 (25.40) 21 1/2 (54.61) SGHR250

3.00-3.49 (7.62-8.86) 3,200 (14,234) 10 (25.40) 23 1/2 (59.69) SGHR300

3.50-3.99 (8.89-10.13) 3,200 (14,234) 10 (25.40) 25 1/2 (64.77) SGHR350

Support Grips SGH Series