TRUE BLUE
Germany
Arnold & Richter Cine Technik GmbH & Co. Betriebs KG.
Pulvermuhle, D-83071 Stephanskirchen
Tel: +49(0)8036-3009-0, Fax: +49(0)8036-2471
ARRI Lighting Solutions GmbH
Ernst-Augustin Str. 12, D-12489 Berlin
Tel: + 49(0)30-678233-0, Fax: +49(0)30-678233-99
Great Britain
ARRI GB Limited (Sales & Service)
2 Highbridge, Oxford Road, Uxbridge, Middlesex, UB8 1LX, Great Britain
Tel: +44 (0)1895 457 000, Fax: +44 (0)1895 457 001
Italy
ARRI Italia S.r.l. (Sales & Service, Milan)
Viale Edison 318, 20099 Sesto San Giovanni (Milano), Italy
Tel: +39 (02)262 271 75, Fax: +39 (02)242 1692
ARRI Italia S.r.l (Sales & Service, Rome)
Via Placanica 97, 00040 Morena (Roma), Italy
Tel: +39 (06)79 89 021, Fax: +39 (06)79 89 02 206
USA
New Location & Studio Fresnels
ARRI Inc. (Sales & Service, East Coast)
617 Route 303, Blauvelt, NY 10913-1109, USA
Tel: +1 (845)353 1400, Fax: +1 (845)425 1250
ARRI Inc. (Sales & Service, West Coast)
600 North Victory Blvd., Burbank, CA 91502-1639, USA
Tel: +1 (818)841 7070, Fax: +1 (818)848 4028
Canada
ARRI Canada Limited (Sales & Service)
415 Horner Ave, Unit 11 & 12, Toronto, Ontario M8W 4WS, Canada
Tel: +1 (416)255 3335, Fax: +1 (416)255 3399
Australia
ARRI Australia PTY Limited
Unit 6C, 5 Talavera Road, Macquarie Park NSW 2113, Sydney, Australia
Tel: +61 (2)9855 4308, Fax: +61 (2)9855 4301
Hong Kong
ARRI ASIA Limited
Office 3B on 29/F, The Centrium, 60 Wyndham Street, Central, Hong Kong
Tel: + 852 2571 6288 Fax: + 852 2875 9181
This ARRI True Blue brochure (ID-No. L5.90179.0) is published by Arnold & Richter Cine Technik, April 01, 2008 © ARRI/2008
Technical data and offerings are subject to change without notice. All rights reserved. Without any warranty. Not binding 02/02008. ARRI is a registered trademark of Arnold & Richter Cine Technik GmbH & Co. Betriebs KG.
Arnold & Richter Cine Technik GmbH & Co. Betriebs KG • Türkenstrasse 89 • D-80799 Munich • phone +49(0)89 3809 0 • fax +49 (0)89 3809 1245 • www.arri.com
THE EVOLUTION
Of Authentic ARRI TRUE BLUE Lighting
RRI | TRUE BLUE
A
ARRI TRUE BLUES represent an unprecedented evolution of
the Studio and Location fixtures that have been popular
workhorses for over two decades. Following extensive
research and feedback from lighting professionals around
the world, combined with advances in technology, ARRI has
designed a series of six highly innovative lampheads with
over 30 new improvements for studio and location lighting.
With reduced weight, compact size and maximum light
output TRUE BLUES set a new standard for professional
lighting equipment.
New pressure die cast and extruded aluminium components
have reduced the overall weight of the TRUE BLUE fixtures
without any sacrifice in quality or durability. Many
components now offer greater strength and resistance
to corrosion.
ARRI’s cross cooling system* reduces lamp housing
temperature by 25% and lens temperature by 17%. With
special air channels built into the aluminium extrusion, a
constant stream of air passes around the Fresnel lens and
into the lamphead regardless of the tilt angle.
easier, the stirrup mounting slides and can be adjusted to
counterbalance all accessories. The new extruded aluminium
stirrup is stronger, lighter and less bulky but still permits full
fixture rotation. It’s soft contour makes it comfortable to carry.
The new Stegmaier connector* and strain relief rotate to
allow the cable orientation to be quickly adjusted for
hanging or stand mounting. Improved barndoors are
stronger, less susceptible to bending and a new
hinge design maintains constant tension that can be
easily adjusted.
Routine maintenance and repair are easier with fast, simple
access to all internal components. Cleaning is made
effortless with smooth lamp housing surfaces.
ARRI has redesigned these new lights down to the smallest
detail, offering lighting professionals better choices for
location and studio work. TRUE BLUE Fresnels from 1000 to
5000W include the T1, T2, T5, ST1, ST2 and ST5.
* Patent pending
At the heart of the TRUE BLUE concept is a redesigned
stirrup and improved tilt lock. The stainless steel friction disc
locks the lamphead securely even with the largest Chimera
or other accessories. To make balancing the lamphead even
2
3