ArmyTek Tiara A1, Tiara C1 User guide

Model

Tiara A1

Tiara C1

LED / Optics

Cree XP-L or XM-L2 / TIR

Brightness stabilization type

FULL (constant light)

Light output, LED / OTF lumens*

600 / 450

800 / 610

Peak beam intensity, candelas

1840

2160

Hotspot / spill

70° / 1 20°

Beam distance*

86 meters

93 meters

Modes, light output (OTF
lumens*) and runtimes
(measured with Sanyo
Eneloop AA 2000 mAh /
Armytek CR123A 1500 mAh

until the light output drops to
10% of the initial value)

Turbo

450 lm / 0.8h

610 lm / 0.7h

Main3

90 lm / 4.2h

90 lm / 6.2h

Main2

30 lm / 11.7h

30 lm / 18h

Main1

9 lm / 35h

9 lm / 55h

Firefly2

1.9 lm / 8d

1.9 lm / 13d

Firefly1

0.15 lm / 90d

0.15 lm / 140d

Power source

1xAA / 1x14500 Li-Ion

1x18350 Li-Ion / 1xR123 Li-Ion / 1xСR123A

Size and weight (without batteries)

Length 86mm, body diameter 24.5mm,
head diameter 29mm, weight 48g

Length 72mm, body diameter 24.5mm,
head diameter 29mm, weight 45g

Warnings

The flashlight will get hot in Turbo mode quickly and discharge the battery by high current. Don't leave it without your attention as very
bright light can heat objects and be a cause of the fire.

1. Always follow the instructions from this manual and recommendations on battery usage.

2. Apply only the recommended power sources.

3. Do not reverse battery polarity.

4. Do not use different power sources together, i.e. old ones with new ones, charged with

discharged. Do not use different types of batteries combined as the element with less
capacity can be damaged.

5. Do not modify or recast the flashlight and its components as it will deprive you of the

warranty.

6. Do not allow water or any other liquid to leak into the flashlight.

7. Do not aim a switched-on flashlight at people's or animals' eyes – it can cause temporary

blindness.

8. Do not allow children to use the flashlight without your assistance.

The producer will not be liable for any harm done to the user if it was caused by
improper use of the product.

Care and Storage

It is recommended to clean the threads and O-rings off dirt and old grease once or twice per year. Remember that reliable protection
from water and dust cannot be provided by worn out sealing. The fouling as well as lack of lubricant cause fast wear-out of threads and
sealing rings.

To clean the threads do the following:

1. Unscrew the tailcap and remove the sealing ring carefully with a toothpick (do not use sharp metal things as they can damage the ring).

2. Wipe the sealing ring thoroughly with a soft cloth (or tissue). Do not use solvents. If the sealing ring is worn out or damaged

replace it by a new one.

3. Clean the metal threads with a brush using ethanol. Be careful not to allow the applied liquid to get inside the flashlight or tailcap as

it can cause fails in functionality of the flashlight.

After cleaning lubricate the thread and the sealing ring with polyalphaolefin-based silica grease, e.g. Nyogel 760G.The application of
automotive and other improper grease can cause swelling and damage of the sealing rings.

In case of active operation and exploitation in dusty environments, it is recommended to perform cleaning and lubricating of the parts
as often as required.

Tiara

THE MOST TECHNICALLY ADVANCED

USER MANUAL

Thank you for choosing the products of Armytek Optoelectronics Inc., Canada.

Please read this manual carefully before using the flashlight.

Specifications

Armytek Optoelectronics Inc. is a Canadian manufacturer that produces powerful and reliable flashlights designed especially for your
needs. The components made in the USA and Japan. .10 years no-hassle warranty

§ Impressively powerful multi-flashlight with 600-800 LED lumens brightness running on one AA / CR123A battery.

§ TIR-optics provides wide light for efficient area illumination.

§ Easy operation and 6 comfortable modes of light output.

§ Reliable headband made of soft and flexible materials for comfortable fixation of the flashlight on the head.

§ Small and light, but at the same time durable and multi-functional flashlight.

§ Prolonged runtimes — up to 140 days with one power element .

§ Removable pocket clip and flat tailcap for vertical standing.

§ Complete correspondence to the highest standards of durability and reliability: the flashlight easily withstands fallings, impacts

and vibration.

Armytek provides free warranty repair for 10 years (excluding batteries, chargers, switches and connectors which have 2 years
warranty) from the date of buy with the document confirming the purchase.

Guarantee does not extend to damage during:

1. Improper usage.

2. Attempts to modify or repair the flashlight by nonqualified specialists.

3. Longtime application in chlorinated or polluted water, or other liquids (other than water).

4. High temperatures and chemicals' exposure (including the exposure of liquid from defected batteries).

5. Usage of low-quality batteries.

Service and Warranty

Web: www.armytek.com Email: [e-mail]

Address: 13-85 West Wilmot St, Richmond Hill, Ontario, L4B 1K7, Canada

Specifications are subject to change without notice.

Armytek Optoelectronics Inc.

* Light output for flashlights with Warm light are about 7% less, beam distances are about 3% less.

We DO NOT RECOMMEND to use CR123A batteries as a power source for often and continuous flashlight’s operation.
Remember that old or low-quality disposal batteries can be damaged under heavy load and explode.

Set description

Operation

2

4

Items included in the package:
1 - Flashlight
2 - Clip

6

3 - Plastic holder

4 - Headband
5 - 2 spare O-rings
6 - User manual

1

3

x2

5

Tiara

ь Your flashlight can inconsiderably differ from the pictures in the manual.
ь The producer reserves the right to change the package at his own discretion without modifying this manual.

Initial Service

1.

3.

2.

To set/replace batteries:

1. Unscrew the tailcap.

2. Place the batteries with the positive contact (+) facing the head of the flashlight.

3. Adjust the tailcap and tighten it as far as it can go.

The flashlight is ready for operation.

We DO NOT RECOMMEND to leave power sources inside the flashlight for a long storage period, as batteries (especially, non-rechargeable) can
leak for various reasons and damage the inner parts of the flashlight. If you want to keep your flashlight in a stand-by state with batteries in then use
new and high-quality batteries and store the flashlight in acceptable for batteries operational temperature and revise the batteries' state at least
once a month. If you have noticed any signs of batteries' defects then withdraw them from the flashlight and utilize. It is also recommended to
replace discharged batteries with new ones before the storage as the chance of leakage is higher with discharged batteries.

In OFF state:

Click: To turn on the last used mode.
Press and hold: To go through 2 Firefly modes (release to select). Keeping button pressed will start cycling through the Main modes.

In ON state:

Click: To turn off the flashlight.
Press and hold: To start cycling through the Main modes.
Double click: To turn on the Turbo mode. The second double click brings back the last used mode.

For comfortable operation you have a convenient momentary access to all the following modes:

Press & Hold

Click x1

Click x2

Press & Hold

Firefly

OFF вFirefly1 вFirefly2

Main

OFF вMain (if last used)

Turbo

Any mode вTurbo
Turbo вLast mode

Cycling through Modes

Main1 вMain2

ез

Main3

Firefly. Press and hold the button in OFF-state to turn on the

desired Firefly mode and then release immediately. Keeping
the button pressed will start cycling through the Main
modes.

Main. Short click from OFF-state activates the Main mode (if
it was the last mode used previously).

Turbo. The mode is activated by double click in any mode. To
return to the last mode make double-click again.

Cycling through the Main modes. In ON-state press and hold
the button (in any mode): the 3 Main modes will start
switching cyclically. Release the button to select the desired
mode. In Turbo mode it starts cycling through the Main

modes.

To use the headmount with the flashlight:

1.

Put in the band in the first clasp.

Pass the end of the band through the second clasp and fix it.

2.

Put in the band through the slots in the plastic holder

3.

and fix the flashlight. Adjust elastic band to the size
of your head.

Automemorizing. After switching off the last used Mode is memorized for quick 1-click access at next switching on.

Lock-out function. Unscrew the tailcap to 1/4 for the protection from accidental switching on.

Low Battery Indication

Warning

Critical

вFirefly1
вOFF

Low Battery Indication. If the brightness is <25% from the nominal value, the LED flashes 2

times ONCE (after 30sec from switching on). If you are not sure if it flashed or not switch the
flashlight off and on: in case the battery is low flashes will repeat. Light output decreases to
Firefly mode at critical level.