ARISTON BI WDHL 75128 MEA Daily Reference Guide

Quick Guide

Maximum load 7 kg

Detergents and

Recommended

60°/40°

THANK YOU FOR BUYING A ARISTON PRODUCT

In order to receive a more complete assistance, please register your product on

www.aristonchannel.com/register

CONTROL PANEL

1. ON/OFF button

2. START/PAUSE button with indicator light

3. WASH CYCLE PROGRESS indicator lights

4. DOOR LOCKED indicator light

5. STAIN REMOVAL button with indic ator lights

6. FUNCTION buttons with indicator lights

7. DRYING ONLY button with indicator

light

8. DRYING LEVELS button

9. TIME DRYING button

10. TEMPERATURE button

11. WASH CYCLE knob

WASH CYCLE TABLE

Before using the appliance carefully read the Safety Instruction.

Before using the machine, it is imperative that the transport bolts are removed. For more detailed instructions on how to remove them, see the Installation Guide.

1049

Power input in o mode 0.5 W / in left-on mode 8 W

Wash cycle

1 Daily Mix Wash & Dry 40 °C

2 Shirts & T-Shirts 40 °C

Temperature

Default Range

- 40 °C 800 3,5 3,5 265

- 40 °C 1000 2,0 2,0 180

Maximum

spin

(r.p.m.)

Max. load for

wash cycle (kg)

Max. load for

drying cycle

(kg)

Duration

(Minutes)

  

Drying

Additives

Wash

2 3

Fabric

softener

Powder Liquid

3 Pre Iron – – – 1,5 – 20 – – – – –

4 Steam Refresh – – – 1,5 – 20 – – – – –

5 Cotton (2) 40 °C

6 Synthetics 40 °C

7 Anti Stain Quick 40 °C

8 Anti Stain 100 40 °C

9 White 60 °C

Eco Cotton

(1)

11 Coloureds 40 °C

12 Ultradelicates 30 °C

13 Wool 40 °C

14 Fast 30' 30 °C

Rinse+Spin – – 1200 7,0 5,0 50

Spin & Drain – – 1200 7,0 5,0 10



Required dosage  Optional dosage

60 °C

- 60 °C 1200 7,0 5,0 230

- 60 °C 1200 4,0 3,5 195

- 40 °C 1200 3,5 3,0 45

- 40 °C 1200 7,0 5,0 205

- 90 °C 1200 7,0 5,0 140

60° C 1200 7,0 5,0 210

40°C 1200 7,0 5,0 230

- 40 °C 1200 7,0 5,0 100

- 30 °C - 1,0 1,0 80

- 40 °C 800 1,5 1,5 75

- 30 °C 800 3,0 - 30 –

    

  

   

    

  

 

–



– – – –





detergent

–

– –



–



The cycle duration indicated on the display or instruction manual is an estimate based on standard conditions. The actual duration may vary in relation to several factors, such as the temperature and pressure of the incoming water, ambient temperature, amount of detergent, load quantity and type, load balancing and any additional options selected.

1) Test programme in compliance with standard EN 50229 (Wash): This cycle is designed for normally soiled cotton loads and is the most ecient in terms of both electricity and water consumption; it should be used for garments washable at 60°C or at 40°C. The actual washing temperature may dier from the indicated value.

Test programme in compliance with standard EN 50229 (Drying): select the 10 wash programme and set the drying level to “ ”, for both loads. The rst drying cycle must be carried out with the nominal load.

PRODUCT DESCRIPTION

1. Worktop

2. Detergent dispenser

3. Control panel

4. Door handle

5. Door

6. Water lter

7. Adjustable feet (4)

For all testing institutes:

2) Long cotton cycle: set cycle 5 at a temperature of 40°C.

DETERGENT DISPENSER

Compartment 1:

Do not insert detergent in this compartment.

Compartment 2: Washing detergent (powder or liquid)

Compartment 3: Additives (fabric softeners,

etc.)

The fabric softener must not exceed the “MAX” level.

! Use powder detergent for white cotton garments, for pre-washing, and for washing at

temperatures over 60°C. ! Follow the instructions given on the detergent packaging.

WASH CYCLES

40°

60°

Follow the instructions on the symbols of the garment’s wash care label. The value indicated in the symbol is the maximum recommended temperature for washing the garment.

Daily Mix Wash & Dry

use programme 1 to wash and dry mixed garments (cotton and synthetics). This cycle may be used to wash and dry loads of up to 3,5 kg; we recommend the use of liquid detergent. The use of the steam in this programme is optimised to reduce the formation of creases on garments, making them easier to iron.

Shirts & T-Shirts

Use programme 2 to wash and dry shirts and T-shirts in dierent fabrics and colours to ensure maximum care. This cycle may be used to wash and dry loads of up to 2 kg. To achieve optimum results, use liquid detergent and pre-treat cus, collars and stains. The use of the steam in this programme is optimised to reduce the formation of creases on garments, making them easier to iron.

Pre Iron

Use this programme immediately before ironing; max. 1,5 kg load. The use of the steam in this programme is optimised to reduce the formation of creases on garments, making them easier to iron.

Steam Refresh

For refreshing garments, neutralised unpleasant odours and relaxing the bres by delivering steam into the drum. The garments will be damp at the end of the cycle.

Cotton

Suitable for washing towels, underwear, table cloths, etc. made of resistant linen and cotton that are moderately to heavily soiled.

Synthetics

Suitable for washing moderately soiled garments made of synthetic bres (e.g. polyester, polyacrylic, viscose, etc.) or mixed synthetic-cotton bres.

Anti Stain Quick

This cycle is ideal for washing daily stains in 45’. It is ideal for mixed fabrics and coloured garments. If the drying option is selected, a drying cycle automatically activates at the end of the wash cycle that resembles open-air drying, with the added advantages of preserving garments from yellowing due to sunlight exposure and preventing loss of whiteness caused by the possible presence of dust in the air. Dryness level “ ” recommended.

Anti Stain 100

This cycle is suitable to heavily-soiled garments with resistant colours. It ensures a washing class that is higher than the standard class (A class). When running the programme, do not mix garments of dierent colours. We recommend the use of powder detergent. Pre-treatment with special additives is recommended if there are obstinate stains. If the drying option is selected, a drying cycle automatically activates at the end of the wash cycle that resembles open-air drying, with the added advantages of preserving garments from yellowing due to sunlight exposure and preventing loss of whiteness caused by the possible presence of dust in the air. Dryness level “ ” recommended.

White

For heavily soiled whites and resistant colours.

Eco Cotton

Suitable for washing moderately soiled cotton garments. At 40°C and 60°C it is the standard cycle for washing cotton garments, and is the most

ecient in terms of combined water and electricity consumption.

Coloureds

For washing coloured cotton garments. This programme is optimised to keep colours bright even after repeated washing.

Ultradelicates

For washing very delicate garments. It is advisable to turn the garments

inside out before washing them. For best results, use liquid detergent on delicate garments.

When selecting an exclusively time-based drying function, a drying cycle is performed at the end of the wash cycle that is particularly delicate, thanks to light handling and appropriate temperature control of the water jet. The recommended durations are: 1 kg of synthetic garments --> 150 min 1 kg of synthetic and cotton garments --> 180 min 1 kg of cotton garments --> 180 min The degree of dryness depends on the load and fabric composition.

Wool - Woolmark Apparel Care - Green:

The Wool wash cycle of this machine has been approved by The Woolmark Company for the washing of wool garments labelled as “hand wash” provided that the products are washed according to the instructions on the garment label and those issued by the manufacturer of this washer-dryer (M1126). The Woolmark logo is a Certication mark in many countries.

Fast 30’

For washing lightly soiled garments in a short time. Not suitable for wool, silk and garments to be washed by hand.

Rinse+Spin

Designed for rinsing and spinning.

Spin & Pump out

Designed for spinning and draining the water.

WASH CYCLE PHASE INDICATOR LIGHTS

Once the desired wash cycle has been selected and has begun, the indicator lights switch on one-by-one to indicate which phase of the cycle is currently in progress.

Wash

Rinse

Spin/Drain

Drying

End of Wash Cycle

DOOR LOCKED INDICATOR

When lit, the symbol indicates that the door is locked. To prevent any damage, wait until the symbol turns o before opening the door. To open the door while a cycle is in progress, press the START/PAUSE button; if the indicator light is o, the door can be opened.

FIRSTTIME USE

Once the appliance has been installed, and before it is used for the rst time, run a wash cycle with detergent and no laundry, by setting the “Auto-Clean” cycle.

DAILY USE

Prepare the laundry by following the suggestions appearing under the “TIPS AND SUGGESTIONS” section.

- Turn the washing machine on by pressing the ON/OFF button. All the indicator lights will light up for a few seconds, then only the lights corresponding to the settings for the selected wash cycle will remain lit; the START/PAUSE indicator light will also ash.

- Open the door. Load the laundry while making sure not to exceed the maximum load quantity indicated in the Wash Cycle Table.

- Pull out the detergent dispenser drawer and pour the detergent into the relevant compartments as described in “DETERGENT DISPENSER DRAWER” section.

- Close the door.

- Set the WASH CYCLE knob to the desired cycle.

- Modify the temperature: pressing the reducing the temperature down to the cold wash level (20°C).

- Select the desired wash cycle.

- Select the desired options.

- Press the START/PAUSE button to start the wash cycle; the relative indicator light will light up steady green and the door will lock ( indicator light on).

button allows for gradually

PAUSING A CYCLE

To pause the wash cycle, press the START/PAUSE button again; the indicator light will ash. If the indicator light is not lit, the door may be opened. To start the wash cycle from the point at which it was interrupted, press the START/PAUSE button again.

OPENING THE DOOR, IF NECESSARY

Once a cycle starts, the indicator light turns on to signal that the door cannot be opened. While a wash cycle is running, the door remains locked. To open the door while a cycle is under way, for example, to add or remove garments, press the START/PAUSE button to pause the cycle; the indicator light will ash. If the indicator light is not lit, the door may be opened. Press the START/PAUSE button again to continue the cycle.

CHANGING A RUNNING WASH CYCLE

To change a wash cycle while it is in progress, pause the washing machine using the START/PAUSE button (the relative indicator light will ash), then select the desired cycle and press the START/PAUSE button again. ! To cancel a cycle that has already begun, press and hold the ON/OFF button. The cycle will be stopped and the machine will switch o.

END OF THE CYCLE

Once the cycle terminates the indicator light will light up; when the indicator light switches o, the door may be opened. Open the door, unload the laundry and switch o the machine. If you do not press “ON/ OFF” button, the washing machine will switch o automatically after about a half of an hour. Close the water tap, open the door and unload the washing machine. Leave the door ajar to allow the drum to dry.

+ 2 hidden pages