2 | AF-9400PV2R Users’ Manual
Notice
This manual can help you to become familiar with how-to-use and the many great features of the
personal video recorder AF-9400PV2R. All the safety and operating instructions should be read
before the AF-9400PV2R is operated. Please keep the manual in a fixed place so that it can be
easily referred to later.
The following symbols will serve as follows:
“MENU”
(Double quotation marks)
Indicates any other additional important or helpful information.
Indicates warning information.
Indicates a button on the remote control or the product.
To reduce the risk of electric shock, do not remove cover (or back).
No user serviceable parts inside. Refer servicing to qualified service
personnel.
Indicates dangerous voltage inside the product that presents a risk of
electric shock or personal injury.
Indicates important-operating and maintenance instructions
accompanying the product.
Indicates
Indicates
the menu is provided to the only TV1.
the menu is provided to the only TV2.
Safety and Precautions
<Attention when installing the product>
Contents | 3
Install on an even plane.
Leave a minimum 10cm gap all around the product.
<Use and care of the product >
Place the product in a well-ventilated area.
Don’t install in the cold or under direct sunlight.
Don’t disassemble, repair, or reorganize the product.
Place the product where dust and other materials do not build up.
Don’t plug in with several other power plugs.
Don’t place objects on top of the product.
Don’t place the product where there are extreme vib rations or near magnetic
forces.
Don’t place cups that hold water or other liquids on top of the product.
4 | AF-9400PV2R Users’ Manual
T able of Contents
Chapter 1. Before You Begin ························ 5
1.1 Features ············································ 6
1.2 Package Contents ···························· 8
1.3 Names of Each Part ························· 9
1.3.1 Front Panel ···································· 9
1.3.2 Rear Panel ··································· 10
1.4 Names of Remote Button ··············· 12
1.4.1 Names of Remote Button ············ 12
Remote Control Extender
1.4.2
Chapter 2. Connections ······························ 19
2.1 Connecting a TV & VCR ················· 20
2.2 Connecting a Dish ·························· 23
2.3 Connect the Optical S/PDIF ··········· 24
2.4 Connect the USB ···························· 24
2.5 Starting Up ······································ 25
Chapter 3. Basic Settings ··························· 27
3.1 Language ········································ 28
3.2 Time Setting ···································· 29
3.3 Output Setting ································· 29
3.4 System Setup ································· 30
3.5 Antenna Setting ································ 31
Chapter 4. Operations ·································· 33
[Basic Functions] ·································· 34
4.1 Changing Channels ························ 34
4.2 Adjusting Volume ···························· 34
4.3 Viewing Program Information ········· 35
4.4 Switching TV and Radio ················· 36
4.5 Freezing Screen/Zooming Screen ·· 36
4.6 Changing Subtitle Language ·········· 37
4.7 Changing Audio Language ············· 38
4.8 Selecting Audio Output Direction ···· 38
[Advanced Functions] ··························· 39
4.9 Managing Channel List ··················· 39
4.9.1 Displaying Channel List ··············· 39
4.9.2 Searching Channel ······················ 40
4.9.3 Viewing Multi-Channels Window · 41
4.9.4 Changing Satellite Group ············ 42
4.9.5 Editing Channels ························· 43
4.10 Managing Favorite Channel Lists · 44
4.11 Changing Channel Mode ·············· 46
4.12 Viewing Program Guide ················ 47
4.13 Viewing PIP ·································· 48
··············· 15
4.14 Recording & Playback ·················· 50
4.14.1 Instant Recording ······················· 50
4.14.2 Normal Recording ······················ 51
4.14.3 Reservation Recording ·············· 53
4.14.4 Recorded File Playback ············· 54
4.14.5 MP3 File Playback ····················· 56
4.14.6 Bookmark ··································· 57
4.14.7 Cutting Data ······························· 57
4.15 Switching Rooms ·························· 58
4.16 Watching the Other Room ············ 58
4.17 Viewing Teletext ···························· 59
4.18 Changing STB/TV ························· 59
Chapter 5. Settings ····································· 61
5.1 Search Channel ······························ 63
5.1.1 Antenna Setting ··························· 63
5.1.2 Automatic Search ························· 65
5.1.3 Manual Search ····························· 66
5.1.4 Advanced Search ························· 67
5.1.5 System Setup ······························· 67
5.2 Edit Channel ··································· 68
5.2.1 Edit Channel ································ 68
5.2.2 Edit Favorite ································· 69
5.2.3 Edit Transponder ························· 69
5.2.4 Remove Satellite ·························· 70
5.3 Setup ··············································· 71
5.3.1 Language Setting ························· 71
5.3.2 OSD Setting ································· 72
5.3.3 Output Setting ······························ 72
5.3.4 Time Setting ································· 73
5.3.5 Timer Setting ································ 73
5.3.6 Lock Control ································· 73
5.3.7 MediaHighway EPG ····················· 74
5.3.8 TV2 Control ·································· 74
5.4 Tools ················································ 75
5.5 Common Interface ·························· 75
5.6 HDD ················································ 76
Chapter 6. Appendix ··································· 77
6.1 Trouble Shooting ····························· 78
6.2 Specification ···································· 7
9
Chapter 1
Before You Begin
6 | AF-9400PV2R Users’ Manual
1.1 Fea tures
With the new AF-9400PV2R you can watch different programs at two rooms simultaneously. You may
also record two programs each other at the same time or watch one while recording the other on the
built-in hard disk. Enjoy the convenience of Radio Frequency remote control! It doesn't get any better
than this.
The AF-9400PV2R is a personal video recorder which
rewind, forward, and slow motion, etc) and record favorite programs on its hard disk.
watching adult program in your bedroom and your children enjoy watching kid program in their
room at the same time. You can also watch the other room’s program or switch programs between
TV1 and TV2 by pressing the remote control button. The simple connection and easy-of-use
operation, user-friendly three-dimensional OSD, highest quality audio output with Dolby AC-3
Digital Audio, and multi-channel screen are all designed to enrich the user experience.
Furthermore, the AF-9400PV2R provides the enhanced Electronic Program Guide(EPG), various
utilities, and channel change effect modes.
<Main Fea tures>
z
MPEG-2 / DVB(Digital Video Broadcasting ) compliant
z
MP Layer I and II, CD quality audio sound
z
Supports RS-232 port for S/W upgrade (115,200 bps)
z
Separated TV/Radio/All List & Favorite Group List
z
Offering 8,000 TV and radio channels
z
DiSEqC 1.0/1.1/1.2 and USALS
z
Supports multi-channel screen (Mosaic)
z
Variable kind of utilities (Calendar, Calculator, Zoom In)
z
Channel change effect mode (Blank, Fade-In/Out, Freeze)
z
Two tuners PVR with PIP
z
Supports Switching Rooms and Watching the Other Room
z
Multi-channel recording(the recorded files of TV1 and TV2 are summed up to 4 files simultaneously. )
with 1 channel playback
z
Watch two live streams or 1channel playback & 1 channel live stream
z
MP3, PCM playback
z
Time shift playback( . This function is supported to only TV1.)
z
Playback( . This function isn’t supported to TV1 and TV2 simultaneously.) and edit the recorded file
z
Connects to PC via USB 2.0
z
Supports 2 CAMs of DVB Common Interface Standard
z
1 IR Remote(hereafter “RC1”) X 1 RF Remote(hereafter “RC2”) Control for TV2 viewers
z
Vacuum Fluorescent Display(VFD)
z
Supports Multi-Picture Screen(Mosaic)
z
Simple message transmition function
makes it simple to control live TV (pause,
You can enjoy
Ch1. Before You Begin | 7
<Other Features>
z
Capable of receiving both SCPC and MCPC channels
z
Powerful and easy functions for editing (Lock, Delete, Move, Rename Channel & Favorite group)
z
Electronic Program Guide (EPG) for On Screen Channel Information
z
17 OSD Languages and 16Bit RGB OSD menu
z
Auto searching & manual searching function
z
Parental lock function (Install Lock/Menu Lock/ IRD Lock)
z
Ergonomic full functions remote control & 8 buttons on the front panel
z
Teletext and subtitle supported by VBI and OSD
z
Channel editor & channel loader in PC environment
z
Software transfer from receiver to receiver
z
Total 40 configurable timer control
z
S/PDIF for digital audio
z
Picture In Graphics(PIG)
z
Supports Game : Tetris, Block Out, Sokoban
z
User Friendly OSD in your language with Help Sentence
z
Free voltage (SMPS : AC100~240V/50~60Hz)
8 | AF-9400PV2R Users’ Manual
1.2 Package Contents
Please check to make sure the following contents are in the product package.
z
Product contents may be subject to change.
z
Cables not specified above must be purchased separately.
1.3 Names of Each Part
1.3.1 Front Panel
1. Power
Switches the product on/off.
2. CH ▲/▼
Changes the TV/Radio channel Up/Down.
Ch1. Before You Begin | 9
3. VOL ◄/►
Increases or decreases TV/Radio volume level or change the value of an item in menu mode.
4. OK
Selects a menu or confirms the user’s action and displays the channel list during watching a TV.
5. MENU
Displays the menu OSD.
6. EXIT
Exits from the current menu or cancels the current operation in menu mode.
7. CI Slots
Inserts two CI modules.
8. LED
z
STANDBY: Lights in red to indicate that AF-9400PV2R is in Standby mode. This light is
turned off when the product is in operation.
z
Normal: Lights in green to indicate that the channel is searched properly.
z
RCU: Lights in orange to indicate that the remote control is operated properly.
10 | AF-9400PV2R Users’ Manual
1.3.2 Rear Panel
1. LNB IN 1, 2
Connect a coaxial cable of your LNB to this connector up to two cables.
2. LNB OUT 1, 2
Connect LNB OUT to another set-top box or LNB OUT1 to LNB IN2 via a Loop-through cable
3. USB
Connect USB to your PC to copy MP3 file on PC.
4. AUDIO L/R
Connect AUDIO L/R to the matching Audio Inputs of your TV/VCR via a RCA cable.
5. VIDEO
Connect VIDEO to video input of your TV or VCR via a RCA cable.
( )
( )
( )
6. 0/12V
Connect 0/12V adapter to control output voltage for external switch.
( )
( )
7. VCR SCART
Connect this connector to your VCR via a SCART cable.
8. TV SCART
Connect this connector to your TV via a SCART cable.
9. RS-232C
Connect RS-232C to your PC via a serial cable to upgrade AF-9400PV2R software.
10. SVHS
Connect S-VHS to S-VHS video input of your TV or VCR via a S-VHS cable.
( )
Ch1. Before You Begin | 11
11. S/PDIF
( )
Connect S/PDIF to audio input of your amplifier with optical digital port via an optical cable.
12. ANT IN
( )
Connect ANT IN to your TV antenna or cable TV system.
13. TV OUT
( )
Connect TV OUT to your TV antenna input, and then the room changing function is in operation.
14. RF RCU RECEIVER
( )
Connect the port to the phone-jack of RF receiver.
15. VIDEO
( )
Connect VIDEO to video input of TV2 or VCR via a RCA cable.
16. AUDIO L/R
( )
Connect AUDIO L/R to the matching Audio Inputs of your TV2/VCR via a RCA cable.
17. POWER
Turn the AF-9400PV2R On/Off.
12 | AF-9400PV2R Users’ Manual
1.4 Names of Remote Button
1.4.1 Names of Remote Button
STANDBY
To switch the product On or Standby.
MUTE ( )
To mute the sound.
NUMERICAL BUTTONS
To enter a TV/Radio channel number or characters.
HELP
To display all help icons.
TV/RAD
To switch the product TV or Radio.
SAT
To select the specific satellite.
FAV
You can register the favorite channels by pressing the “MENU” button,
and then change the channel mode by pressing the “FAV” button.
TV/STB
To select the input source between satellite and TV.
Recall ( )
To return to the previous chosen channel.
MENU
To display the menu OSD.
EPG
To display the Electronic Program Guide. Press again to return to the
normal mode.
CH ▲/▼
To change the TV/radio channels Up/Down.
VOL ◄/►
To increase or decrease TV/Radio volume level or
change the value of an item with preprogrammed
values. The “◄”
backspace to cancel the numerical input.
OK
To select a menu or confirm the user’s action and
display the channel list during watching a program.
You can watch all channels using the channel list.
EXIT/ZOOM
To exit from the current menu or cancel the current
operation in menu state. To zoom in/out the screen
during watching a program.
INFO
To display the information about the channel.
button can be used as a
Ch1. Before You Begin | 13
Teletext ( , hereafter “Yellow”)
To display the teletext information about the
channel if applicable.
Subtitle ( , hereafter “Blue”)
To display the provided subtitle language lists of the
current channel.
PVR
To show the recorded file or MP3 file list.
Fast Rewind/Forward ( )
To rewind/forward the playback during the recorded
file playback. Whenever you press
forward playback speed increases by 4 steps (x 2, x
4, x 8, x16). And whenever you press
rewind playback speed increases by 4 steps (x 1, x
2, x 4, x8). If you press the button in the progress
bar state, AF-9400PV2R resumes to the playback
with normal speed after 20 seconds
backward/forward rewind.
, the
, the
PAGE ( )
To change the TV/Radio channel lists by the page.
VOL (+ - )
To change the TV/Radio volume without displaying
the OSD.
CH (▲/▼)
To change the TV/Radio channels without
displaying the OSD.
Audio Language ( , hereafter “Red”)
To display the provided audio language lists of the
current channel.
Sound Mode ( , hereafter “Green”)
To select the sound mode(stereo, left, or right).
Playback ( )
To show the progress bar. If you press the button in
the trick mode or paused state, AF-9400PV2R
resumes to the playback with normal speed.
Slow Rewind/Forward ( )
To change the playback speed into the slow motion
mode.
Pause ( )
To pause the playback.
Stop ( )
To stop the playback or the recording.
Recording ( )
To record the current channel or show the record
menu in the recording state.
14 | AF-9400PVR Users’ Manual
Repeat ( )
Whenever you press the button, the repeat mode
changes sequentially such as a specified block
repeat→all block repeat→ the repeat mode Off.
Cutting Data ( )
To cut the desired section from the recorded file.
Bookmark ( )
To add or delete the current position as a bookmark.
Up to 64 bookmarks for one recorded file can be
set up.
Changing the Position of the Bookmark
(
)
To go to the next bookmark position.
To show the PIP channel list.
Swapping PIP and Main Screen ( )
To swap between the PIP screen and the Main
screen.
Changing the Position of the PIP ( )
To change the position of the PIP screen.
Switching Rooms ( )
To switch rooms between the TV1 and the TV2.
Whenever you press the button, you can watch the
other room’s program and exchange the various
configuration of TV such as Favorite channel, Lock,
Language, and etc. At the other room, they can
also watch your program.
Showing and changing the Size of the
PIP (
Whenever you press the button, the Picture in
Picture(PIP) mode changes sequentially such as
showing the PIP on the screen→changing the size
of the PIP screen→the PIP mode Off.
Showing the PIP List ( )
)
: How to use of 2
nd
RF battery
Watching the Other Room (RC1: ,
RC2:
Whenever you press the button, you can watch the
other room’s(TV1 or TV2) program.
MESSAGE ( )
Users can choose and send a short message from
the list for a simple dialogue
)
2nd RF remote control is supplied two battery and RF module. You can show these under the RF
receiver unit. You should open the cover under the RFreceiver. One is battery only, the other is
battery unit. You must use the battery unit and only battery is have to charge over 8H (Actually all of
battery are have to charge before using)
: Angle of remote control use
The IR remote control can be used at a distance of up to 7 to 10
meters, and at an angle of 30 degrees from the remote control led.
The RF remote control(hereafter RC2) can be used at Maximum
30meters distance from the RF receiver.
Ch1. Before You Begin | 15
1.4.2 Remote Control Extender
1) Introduction
This Remote Control Extender uses the smartest and easiest technology in extending the
remote control operation. By installing the transmitter in the battery pocket only, your remote
control now detects the key signals and transmits them far away.
This extender kit (called Remote Control Extender) includes transmitter (battery type),
receiver (UFO shape), two 2/3 rechargeable batteries and AAA sleeve.
*3/2 AAA
*RF transmitter *RF receiver
Rechargeable battery
Then, the upgraded remote controls with RF transmitter can operate through door, windows,
floors and walls. And this extender kit removes the worry about line of sight requirements.
When the RF transmitter is installed, the remote control still transmits the normal infrared
signal like a normal remote control. That is, your remote control will transmit radio frequency
(RF), regardless of distance or line or sight
.
2) Installing and Operating Cases
1. living to bed room
- control satellite / cable in living room from bed room
.
16 | AF-9400PV2R Users’ Manual
2. floor to floor
- control satellite / cable in living room from the second floor
3) Installing the RF T ransmitter
Your remote control will use several AAA size batteries, normally 2 to 4. Please install RF
transmitter instead of a battery (one of batteries only). Below shows the battery AAA size
using in normal remote control.
z
AAA battery
: Install AAA size transmitter like a normal AAA battery
4) Installing the R eceiv er
Ch2. Connections | 17
5) Function Switch Sele ction (A, B, C)
You will find slide switch on the bottom of receiver if you remove the plastic case. The positions A,
B, C are used to set the receiver to different remote controls. The factory setting is on position C
(Most of remote control use position C)
A: 56KHz (a few special remote)
B: 38KHz (most of remote controls)
C: sensitivity lower (external interference etc)
6) erference
To determine whether your extender is causing the interference. If your receiver does not function
properly, the two LEDs(A&B) will blink continuously or one LED will blink even without you using a
remote control. IF THIS OCCURS PLEASE SEE BELOW.
1. Move your extender away from the receiver and check + realign.
2. Connect your extender to an outlet on a different electrical circuit from the receiver
3. Reduce the antenna length.
4. Select position “C” of slide switch on the back of the receiver.
Please remove the plastic cover first.
5. If you cannot eliminate the interference, please contact your dealer.
7) echarging Battery
Your RF transmitter is installed with small recharging battery (2/3 AAA size), and the performance
of the extender deteriorates (the LEDs do not blink when you press the remote control), you need
to recharge (replace) the battery.
1. Remove the RF transmitter from your remote control and take rechargeable battery out.
2. Find the recharging pocket on the bottom of receiver. There should be an extra battery, fully
charged already in the pocket.
18 | AF-9400PV2R Users’ Manual
3. Install the full-charged battery in transmitter and insert old battery into the 2/3 AAA pocket for
recharging. Lose the cover.
While the battery is recharging, the LED CHG (BAT) will blink in the receiver. LED will blink when
the recharging battery is inserted in the pocket. Full recharging time is approx. 12 hours and 6-8
hours when the battery is not fully flat.
After replacement of rechargeable battery, you need to test the function. If you feel the same
distance or working problem, replace normal battery (AAA) with new one.
-- Caution --
1. Do not use a normal battery in recharging pocket.
2. Only use a rechargeable battery.
8) Care
Keep the extender dry, if it gets wet, wipe it dry immediately. Use and store the extender only in
normal temperature environments. Handle the extender carefully and do not drop it. Keep the
extender away from dust and dirt, and wipe it with a damp cloth occasionally to keep it looking new.
Specifications
Operating range: Up to 30+netres(100 feet)
Operating frequency: 433.92MHz
Battery (included): two 1.2V 2/3AAA (Rechargeable)
Worldwide patents pending.
CE certificate: EMC directive 89/336/EEC
FCC ID#: SB7AAA
IC#: 5216A-AAA
Ch2. Connections | 19
Chapter 2
Connections
20 | AF-9400PV2R Users’ Manual
This chapter describes how to connect the product to your home entertainment system. Choose
the most appropriate procedure depending on your environments.
: If you encounter with any problems or have any questions during connecting the
product, please contact your local product distributor.
2.1 Connecting a TV & VCR
[ For TV1 ]
1. Connecting a TV with RF
1) Connect the TV antenna to the ANT IN of the product.
2) Connect the RF-IN of TV to the TV OUT of the product.
3) Connect the Video and Audio of TV to the VIDEO and AUDIO L/R of the product.
4) Go to 2.2 Connecting to Dish, and then connect your dish.
( )
Ch2. Connections | 21
2. Connecting a TV and VCR with RF
1) Connect the TV antenna to the ANT IN of the product.
2) Connect the RF-IN of VCR to the TV OUT of the product.
3) Connect the RF-OUT of VCR to the RF-IN of TV.
4) Connect the Video and Audio of TV to the VIDEO and AUDIO L/R of the product.
5) Go to section 2.2 Connecting to Dish, and then connect your dish.
( )
3. Connecting a TV and V CR with a Scart Cable
1) Connect the TV antenna to ANT IN of the product.
2) Connect the RF-IN of VCR to the TV OUT of the product.
3) Connect the RF-OUT of VCR to the RF-IN of TV.
4) Connect the Video and Audio of TV to the VIDEO and AUDIO L/R of the product.
5) Connect the TV Scart of TV to TV SCART with fully featured Scart cable.
6) Go to section 2.2 Connecting to Dish, and then connect your dish.
( )
22 | AF-9400PV2R Users’ Manual
[ For TV2 ]
4. Connecting a TV 2 with a RF
1) To split antenna signal both TV1 and TV2, connect the Splitter to the TV OUT of the product.
2) Connect the RF-OUT of the Splitter to the RF-IN of TV2. And connect the other port of the
Splitter to the RF IN of TV1.
3) Connect the Video and Audio of TV to the VIDEO and AUDIO L/R of the product.
4) To use the RF remote control for TV2 viewer, connect the RF RCU Receiver of the product to
the RF remote control receiver.
( )
Ch2. Connections | 23
2.2 Connecting a Dish
AF-9400PV2R provides three antenna modes(Loop, twin, T1/T2). Refer to Chapter 3.4 System
Setup for detailed information.
If you connect one antenna cable to
Case1) One Antenna and a loop-thro ugh cable
the LNB1 IN and connect the LNB1 Out to the LNB2 IN with a loop-through cable.
When the channel of LNB1 is recorded, you can switch and view channels which have the same
polarity or transponder with the recorded channel.
LNB 1 IN and LNB 2 IN have different signal sources.
Case2) Different Two Antennas
Even during recording, you can freely switch channels regardless of polarity or transponder.
:
1. One Antenna and a loop-through cable
1) Connect the satellite antenna cable to the LNB1 IN.
2) Connect the LNB1 Out to the LNB2 IN with a loop-through cable.
3) Select ‘Loop’ in the antenna setting. Refer to Chapter 3.4 System Setup for detailed information.
:
2. Two Antennas
1) Connect the satellite antenna cable to the LNB1 IN.
2) Connect other satellite antenna cable to the LNB2 IN.
3) Set ‘T1/T2’ separately in the antenna setting. Refer to Chapter 3.4 System Setup for detailed
information.
24 | AF-9400PV2R Users’ Manual
2.3 Connect the Optical S/PDIF
If you watch a program encoded by a Dolby Digital, you can enjoy the higher quality sound of the
Dolby Digital audio
Connect the optical S/PDIF to Dolby digital decoder or Digital television.
.
2.4 Connect the USB
Connect the USB to your PC to copy MP3 file from PC.
Ch2. Connections | 25
2.5 Starting Up
1. Connect the power cord of the product to a power outlet and press the “Power” button at the
rear panel to turn the product on.
2. The first time you power up the product, it will display the initial screen, then some parameters
for system configuration should be set. Refer to the following chapter for detailed information
about the basic settings.
26 | AF-9400PV2R Users’ Manual
Ch1. Before You Begin | 27
Chapter 3
Basic Settings
28 | AF-9400PV2R Users’ Manual
If you use the product for the first time after connecting, you have to perform basic settings. Once
the setup procedure is finished successfully, you can start watching TV or listening to radio.
Turn on your TV and the product. Follow the instruction on the screen.
Press the “MENU” button to save the previous input information and exit the basic settings. If you
exit the basic settings without fully completing the setting procedures, you may not watch any
broadcasting normally.
3.1 Language
You can select Menu Language, Audio, and the Subtitled Language.
1. Select the appropriate language from the list using the “
2. Press the “
3. Press the “Red” button to move to the next setting.
” buttons to move cursor into other language items.
▲▼
◀▶
” button.
3.2 Time Setting
You can set the current time.
Ch3. Basic Settings | 29
1. Select Time Mode between GMT Offset and Local time using the “
2. Select the appropriate GMT Offset value using the “
” button or enter the local time using the
◀▶
◀▶
” button.
“0~9” button.
3. Press the “Red” button to move to the next setting. Or press the “EXIT” button to return to the
previous screen.
3.3 Output Setting
You can set the audio and video output such as video, TV screen mode, SPDIF, TV type, RF Type
and etc.
z
Video Output :
z
TV Screen Mode :
z
SPDIF Output:
z
TV Type:
z
Channel Change Option:
Blank
z
UHF Selection:
z
UHF Channel:
z
RF Type:
SPDIF Output, UHF, UHF Channel, and RF Type option aren’t provided in TV2.
:
1. Select the video, TV screen mode, SPDIF, TV type, RF Type value using the “
2. When you complete the setting, press the “Red” button to search the channel.
3. Move cursor to the “OK” button and press the “OK” button to save the settings.
RGB, CVBS
4:3 Letter Box, 4:3, 16:9
Enable, Disable
AUTO, NTSC, PAL
Freeze, Fade In/Out,
TV1, TV2
21-69
PAL-BG/I/DK, NTSC
◀▶
” button.
30 | AF-9400PV2R Users’ Manual
3.4 System Setup
You can set the antenna’s properties such as system, tuner, longitude, latitude, and etc.
z
z
z
z
z
1. Select the system value using the “
” button. The default value is ‘Fixed’.
◀▶
2. Select the tuner according to the connection type using the “
z
‘T1/T2’ means two tuners are working separately. ‘T1’ means the tuner is connected to LNB1 IN
and ‘T2’ means the other tuner is connected to LNB2 IN.
z
‘Loop’ means the tuners are connected using the loop-through cable from LNB 1 OUT to LNB
2 IN. If you have only one antenna cable, it’s good for you to select ‘Loop’.
z
If you use twin LNB, you can select ‘Twin’.
Fixed, DiSEqC, USALs
System:
T1/T2, Loop, Twin
Tuner:
Longitude, Latitude :
value using the “0~9” button.
Stop, East, West
Move :
Limit Setting :
Set West
” button. (T1/T2, Loop, or Twin)
◀▶
You can enter the
Disable, Enable, Set East,
3. When you complete the settings, press the “Red” button to move to the next step.
4. Move cursor to the “OK” button and press the “OK” button to save the settings.
Ch3. Basic Settings | 31
3.5 Antenna Setting ( )
You can set the antenna's properties to watch the program. This setting is provided to the only TV1
viewer.
: If TV1 viewer selects Search to ‘Enable’ at the Setup-TV2 Control menu, TV2 viewer
can also set the antenna setting. Refer to Chapter 5.3.8 TV2 Control for more
information.
1. Select the Satellite name using the “
2. Show the tuner value according to the tuner type at the previous step(1, 2/Loop/Twin).
: If you select ‘T1/T2’ at the previous step, you should set the antenna setting of ‘1’
and ‘2’ separately. Select ‘1’ to search the channels for ‘T1’, and then select ‘2’ to
search the channels for ‘T2’.
3.
Set the transponder value for the satellite
4. Set the LNB power and frequency type using the “
: When using Universal LNB, select Universal for LNB type (9750/10600 (MHz)).
Also, if you select Universal, 22kHz tone value is controlled automatically.
5. Select 22kHz Tone using the “
Otherwise, select ‘Off’.
6. Select the DiSEqC value using the “◀▶” button.
7. When you complete the setting, press the “Red” button to set the search mode.
” button.
◀▶
using the “◀▶” button.
” button.
◀▶
” button. When using 22kHz tone switch, select ‘On’.
◀▶
32 | AF-9400PV2R Users’ Manual
8. Select the desired item using the “OK” button and press the “Red” button to search the channels.
9. When completing Channel Search, the following message will appear. Move cursor to the “OK”
button and press the “OK” button to save the changes.
If you encounter with any problems or have any questions when setting up the antenna, please
contact your local product installer or distributor.
Now you have completed all steps required for watching TV or listening to radio. Press the
“MENU” button to exit the basic settings.
For detailed information about how to use the
product, refer to Chapter 4.
Ch1. Before You Begin | 33
Chapter 4
Operations
34 | AF-9400PV2R Users’ Manual
[Basic
Functions ]
4.1 Changing Channels
There are several ways to change the channels.
If you are TV2 viewer, the ‘2’
symbol will appear.
z
Press the “
z
Enter your desired channel number using the “0~9“ buttons directly.
z
Press the “OK” button to display TV channel list, and then select the desired channel.
” button on the remote control to access the channels sequentially.
▲▼
4.2 Adjusting V olume
You can change the volume level of the current channel.
z
Press the “◄►” button on the remote control to adjust the volume.
z
Press the “MUTE” button on the remote control to turn the sound off and on again.
: During setting up the Menu(ex, Guide, Edit channel, etc), you can also change the
volume level using the lower “VOL + -
” button without OSD.
4.3 Viewing Program Information
Ch4. Operations | 35
You can view the
program. Press the “EXIT” or “INFO” button to hide the program information.
3 steps
information window by pressing the “INFO” button while watching a
Step 1: Basic Information
The Basic Information is displayed as following on the screen.
Step 2: EPG Information
You can see EPG information about the current program. Press the “INFO” button to view EPG
information during the Basic information is displayed. Press the “EXIT” or “INFO” button to hide the
program information.
: If there is no available EPG information, it is not displayed.
Step 3: Detailed Information
You can see detailed information about the current program. Press the “INFO” button to view
detailed information during the EPG information is displayed. Press the “EXIT” or “INFO” button to
hide the program information.
36 | AF-9400PV2R Users’ Manual
4.4 Switching TV and Radio
Press the “TV/RADIO” button to switch TV or Radio.
If you are TV2 viewer, the ‘2’
symbol will appear.
4.5 Freezing Screen/Zooming Screen
You can zoom in or out the current screen.
1. Press the “EXIT/ZOOM” button to select zooming mode.
2. Press the “Red” button to zoom in the screen or the “Green” button to zoom out the screen. Or
press the “◄►▲▼” button to change the position of the frame.
3. Press the “OK” button to zoom in or out the current screen.
4. Press the “EXIT” button to return to the normal screen size.
Ch4. Operations | 37
4.6 Changing Subtitle Language
If the current program provides Subtitle information, you can select the subtitle language.
1. Press the “
” button to display the subtitle language list.
2. Select the desired subtitle language using the “▲▼”
subtitle language will be displayed at the bottom of the screen.
3. Select ‘OFF’ from the subtitle language list not to display subtitle from the screen.
: You can select a default subtitle language by pressing the “MENU” button and
selecting the Setup–Language Setting–Subtitle menu in order. Refer to
5.3.1 Language Settings
for more information.
button, and press the “OK” button. The
Subtitle language
Chapter
38 | AF-9400PV2R Users’ Manual
4.7 Changing Audio Language
If the current program provides multiple audio languages, you can select the desired language.
1. Press the “
” button to display the audio language list.
2. Select the desired audio language using the “▲▼”
audio language will be changed immediately.
: You can select a default audio language by pressing the “MENU” button and
selecting the Setup–Language Setting–Audio menu in order. Refer to
Language Settings
for more information.
button, and press the “OK” button. The
4.8 Selecting Audio Output Direction
You can select the direction of audio output such as left, right, or stereo.
Press the “
” button to toggle the direction of audio output among left, right, or stereo.
Audio Output
Direction
Chapter 5.3.1
z
If the program supports Dolby AC-3 sound, you cannot select the direction of audio output.
z
You can select Dolby by pressing the “MENU” button and selecting the Setup–Output
Setting– S/PDIF Output menu in order.
Ch4. Operations | 39
[ Advanced
Functions ]
4.9 Managing Channel List
4.9.1 Displaying Channel List
You can see various channel lists and change the channels from the channel list more
conveniently.
1. Press the “OK” button while watching a program to display the selected channel list.
2. Move to the desired channel using the “▲▼” button and press the “OK” button to change the
channel.
Press the “FAV” button to switch among the channel modes such as ‘ALL, FAV1~4, etc’. Refer to
Chapter 4.10 Managing Favorite Channel Lists
for more information.
40 | AF-9400PV2R Users’ Manual
4.9.2 Searching Channel
You can search the specific channel among various channel lists more conveniently.
1. Press the “OK” button while watching a program to display the selected channel list.
2. Press the “Green” button to sort the channel lists by alphabetic order.
: Press the “Red” button to sort the channel groups by FTA/CASI or Tuner.
3. Press the “2(abc)~9(wxyz)” button to search the channel lists which have same initial. For
example, press the “2(abc)” button, and then see the channel lists which start with ‘a’.
: Press the “PAGE ” button to move to the previous/next page.
Ch4. Operations | 41
4.9.3 Viewing Multi-Channels Window
You can display multi-channels window and select a channel to watch.
1. Press the “OK” button while watching a program to display the selected channel list.
2. Press the “Yellow” button to display the number of the multi-channel among 2, 4, 9, 10, 13, or 16.
Move to the desired number of window using the “
display multi-channels.
▼” button and press the “OK” button to
▲
3. Move to the desired channel using the “◄►” button to watch the program.
: The channel images don’t change to increase speed even though the cursor
moves to the other channel window.
4. Press the “EXIT” or “OK” button anytime to return to single channel mode.
42 | AF-9400PV2R Users’ Manual
4.9.4 Changing Satellite Group
You can change the satellite group.
1. Press the “OK” button while watching a program to display the selected channel list.
2. Press the “SAT” button while the channel list is displayed to view the satellite group lists.
3. Select the desired channel group using the “OK” button to display its sub-groups.
4. Press the “EXIT” button to return to the previous screen.
Ch4. Operations | 43
4.9.5 Editing Channels
You can edit(such as lock, delete, move, and rename) all channels or each channel.
Press the “EXIT” or “MENU” button to save the changes and return to the previous menu.
1. Press the “MENU” button.
2.
Move to the Edit menu using the “◄►” button, and press the “OK” button.
①
!
Channel menu using the “OK” button.
Enter your password using the “0~9” buttons. The
③
!
default password is 0000. If you select Menu Lock to ‘No’ at the Setup-Lock Control, you don’t
have to enter the password. Refer to Chapter 5.3.6 Lock Control for the password setting.
Select the Edit
②
!
3. You can lock, delete, move, and rename all channels or each channel. If you want to delete one
or more channels, select the desired channel(s) and press the “Green” button.
4. Whenever you press the “MENU” or “EXIT” button after completing channel deletion, the
following message will appear. Move cursor to the “OK” button and press the “OK” button to
save the changes.
z
Red : Locks/unlocks channel(s).
z
Green: Deletes channel(s).
z
Yellow: Moves channel(s) to the desired location.
z
Blue: Renames a channel name.
44 | AF-9400PV2R Users’ Manual
4.10 Managing Fav orite Channel Lists
You can create and edit favorite channel list(s) or group(s).
1. Press the “MENU” button.
2.
Move to the Edit menu using the “◄►” button, and press the “OK” button.
①
!
Favorite menu using the “OK” button.
Enter your password using the “0~9” buttons. The
③
!
default password is 0000. If you select Menu Lock to ‘No’ at the Setup-Lock Control, you don’t
have to enter the password. Refer to Chapter 5.3.6 Lock Control for the password setting.
Select the Edit
②
!
3. Press the “FAV” button to create new favorite
: FAV1~4 are default name. You can also rename them for your convenience.
channel
group.
z
OK: Deletes channel(s).
z
: Locks/unlocks channel(s).
Red
z
: Renames a channel name.
Green
z
z
: Moves channel(s) to the desired
Yellow
location.
: Renames a channel group name.
Blue
Ch4. Operations | 45
4. You can edit favorite channel list(s) or group(s). If you want to add channel(s), select the desired
channel, and then press the “OK” button.
5. Whenever you press the “MENU” or “EXIT” button after editing favorite channel, the confirmation
message will appear. Move cursor to the “OK” button and press the “OK” button to save the
changes.
46 | AF-9400PV2R Users’ Manual
4.11 Changing Channel Mode
You can change the channel mode by group.
1. Whenever you press the “FAV” button, the channel mode changes sequentially such as
ALL→FAV1→ FAV2→…→All.
2. Press the “OK” button to display All Channel or Favorite Channel lists according to the current
channel mode.
Ch4. Operations | 47
4.12 Viewing Program Guide
The Program Guide shows program information about each channel-by date and time.
1. Press the “EPG” button.
z
: Views daily schedule for the selected
Red
channel.
z
: Views the channel window.
Green
z
: Views the Media highway EPG. It is
Blue
available only when the program provides
the media highway EPG service.
2. Press the “Red” button to view daily schedule for the selected channel.
z
: Moves to other desired channel.
▼
▲
z
: Views weekly schedule for the
Green
selected channel.
z
: Moves to the Now or Next
◄►
information.
z
: Reserves the selected program.
48 | AF-9400PV2R Users’ Manual
4.13 Viewing PIP
The advanced PIP function allows you to watch two different screens at once, even if you don’t
have a VCR connected to your TV.
If you change the main screen channel into the one of different transponder, the PIP screen will be
disappeared automatically. You can see the PIP screen at radio mode, recording mode and
playback mode.
1. Press the “
screen. Whenever you press the button, the PIP mode changes sequentially such as changing the
size of the PIP screen→the PIP mode Off→showing the PIP on the screen.
” button to show the PIP screen and the PIP channel information bar on the
The PIP and information bar is always displayed when you watch a scrambled TV program or a
channel with no signal.
z
The PIP screen shows only live video signal with no audio.
z
The PIP screen is dependent on the main screen channel state. 1) The PIP screen provides
limited functions when you watch a scrambled TV program at TV2. 2) The PIP screen
doesn’t work for viewing the CAS channel at TV2.
z
Press the “CH ▲▼” button to change the main screen channel.
2. Press the “
doesn’t work at playing the recorded file.
” button to swap between the PIP screen and the main screen. But this function
Ch4. Operations | 49
3. Press the “ ” button to change the PIP channel. The PIP channel lists will appear. You can
move to the desired channel using the “▲▼” button, and then press the “OK” button.
You can choose the only channel on the PIP channel lists. The number of PIP channels is variable
according to the main screen channel state.
4. Press the “ ” button to change the position of the PIP screen.
50 | AF-9400PV2R Users’ Manual
4.14 Recording & Playback
AF-9400PV2R provides three recording modes such as the instant recording, the normal
recording, and the reservation recording.
:
z
If TV1 viewer selects PVR to ‘Enable’ at the Setup-TV2 Control menu in TV1, TV2 viewer can
record the program. Refer to Chapter 5.3.8 TV2 Control for more information.
z
The recorded files of TV1 and TV2 are summed up to 4 files simultaneously.
4.14.1 Instant Recording
The instant recording function automatically saves an hour amount of the broadcasting program to
the built-in hard disk
functions such as rewind, fast forward, replay and pause.
1. Press the “MENU” button to enable the instant recording.
Move to the HDD menu using the “◀▶” button, and press the “OK” button.
①
Instant Recording sub-menu using the “
Enable using the “
temporarily, so that you can watch program as you watch a video tape using
” button, and press the “MENU” button. Refer to Chapter 5.6 HDD.
◀▶
( )
” button, and press the “OK” button.
▲▼
Move to the
②
!
Select the
③
!
2. Whenever you watch a program, it starts to record the current channel automatically.
3. Press the “
” button to display the progress bar. The progress bar shows the current operation
status and an amount of temporarily saved data.
z
: Changes the playback speed into
slow motion mode.
z
z
: Moves to the desired position during the
◀▶
progress bar is displayed. Or changes the
volume in on-air mode.
: Moves to the desired position during
the progress bar is displayed. Or changes the
playback speed in the playback mode.
4. If you move to other channel, it stops instant recording and restarts instant recording. The
previous saved data is deleted.
Ch4. Operations | 51
4.14.2 Normal Recording
The normal recording function saves the programs up to 4 programs at once. You can also watch
program using functions such as rewind, fast forward, replay, pause, and recording.
1. Press the “MENU” button to set the recording options.
Move to the HDD menu using the “◀▶” button, and press the “OK” button.
①
Recording sub-menu using the “
” button, and press the “OK” button.
▲▼
!
③
options, and press the “MENU” button. Refer to Chapter 5.6 HDD for the recording setting.
z
You can only change the duration option during the recording.
z
The mode provides the Normal and EPG time option. You can select the EPG time option
when there is any EPG data.
2. Press the “Red” button to start recording immediately for the program you are watching. Press
the “MENU” button to exit the recording option window, and then the index number message will
appear on the upper right corner.
Move to the
②
!
Set the recording
You can also start the normal recording like this :
using the button, ② using the
①
Reservation Recording. Refer to Chapter 4.14.3 Reservation Recording.
: Some menus (such as Search Channel, Edit) don’t work during the recording.
3. If press the “
” button to stop recording, it shows the recording file lists.
52 | AF-9400PV2R Users’ Manual
‘1’ means the file is recording by TV1
z
viewer and ‘2’ means the file is recording
by TV2 viewer.
If you are TV1 viewer, you can stop
z
4.
Move to the desired file using the “▲▼” button, and press the “ ” button. ② Press the
①
recording all files in ‘1’ and ‘2’. If you are
TV2 viewer, however, you can stop
recording the files in only ‘2’.
“EXIT” and “OK” button then the recording is stopped.
: There is limitation to change the channel during the recording.
Ch4. Operations | 53
4.14.3 Reservation Recording
The reservation recording function saves the desired programs automatically. You can watch
program using functions such as rewind, fast forward, replay, pause, and recording.
1. Press the “MENU” button to set the reservation recording options.
Move to the Setup menu using the “◀▶” button, and press the “OK” button.
①
Timer Setting sub-menu using the “
different according to TV1 and TV2.
” button, and press the “OK” button.!The setting menus are
▲▼
!
Move to the
②
!
2. The Timer Setting window will appear. Press the “Red” button to set the recording options.
54 | AF-9400PV2R Users’ Manual
2
3. Set the Mode to ‘Record’ using the “◀▶” button, and then set the Cycle, Time, and Duration.
4. Whenever you press the “MENU” button after completing setup, the following message will
appear. Move cursor to the “OK” button and press the “OK” button to save the changes.
4.14.4 Recorded File Playback
You can play the recorded file by selecting a desired file. But you can’t play the recorded files on
TV1 and TV2 simultaneously.
1. Press the “PVR” button to display the file list. Or press the “OK” button during the playback.
2. Select the desired file to playback using the “▲▼” button, and then press the “OK” button.
z
‘1’ means the file was recorded by TV1
viewer and ‘2’ means the file was recorded
by TV2 viewer.
z
If you are TV1 viewer, you can playback all
files in ‘1’ and ‘2’. But if you are TV2 viewer,
you can playback the files in only ‘2’.
z
If TV1 viewer selects PlayTV1Files to
‘Enable’ at the Setup-TV2 Control menu,
TV2 viewer can playback all files in ‘1’ and
‘
’.
z
: Switches between the recorded files and
◀▶
the MP3 files. Refer to Chapter 4.14.5 MP3 File
Playback.
z
: Shows the specified file with divided into 12
INFO
parts.
z
: Locks/unlocks the specified file.
Red
z
: Deletes the specified file.
Green
z
z
z
z
: Renames the specified file.
Yellow
: Shows the Options(Sorts the files, creates
Blue
folder, and moves file to some folder) .
: Previews the recorded file on the PIP
screen during watching TV at once.
: Descrambles the scrambled file.
You can record the playback file during the playback. ② The file name on
①
recording is in different color.
file playback. You should stop the playback, and then change the channel.
choose the recording file, the channel is changed to the same channel.
3. Press the “
” button to display the progress bar. And you can perform time shift operations like
VCR functions such as slow rewind/forward
: How to Repeat A-B
You can
a specific block within a recorded file and play it back repeatedly.
select
Ch4. Operations | 55
You can’t change the channel during the recorded
③
④
( )
, pause
( )
, repeat( ), and replay( ).
If you
Press the “ ” button to display the progress bar.
①
position.
Move to the desired position using the “◀▶” button. ④ Press the “ ” button again
③
Press the “ ” button to set the start
②
!
to set the end position.
Then the program plays the selected block repeatedly. If you stop the repeat mode, press the “
button during repeating the selected block.
4. Press the “ ” button to stop the playback, and you can watch the current channel on air.
”
56 | AF-9400PV2R Users’ Manual
4.14.5 MP3 File Playback
You can listen to the MP3 file by selecting a desired file.
1. Press the “PVR” button to display the file list. Or press the “OK” button during the playback.
2. Press the “
playback using the “
” button to show the MP3 file list. The MP3 list appears. Select the desired file to
◀▶
” button, and then press the “OK”.
▲▼
3. The MP3 progress bar appears.
4. Press the “MENU” button to exit the MP3 file playback.
Ch4. Operations | 57
4.14.6 Bookmark
You can search positions very quickly and easily by bookmark during the recorded file playback.
1. Press the “
The bookmark OSD will appear on the upper right corner during on air mode.
2. Press the “
3. Press the “
”
button at the desired position to set a bookmark during a recorded file playback.
: Up to 64 bookmarks for one recorded file can be set up.
”
button again to delete a bookmark.
”
button to go to the next bookmark.
4.14.7 Cutting Data
You can cut off a specific
1. Press the “
2.
Press the “ ” button to set the start position. ② Move to the desired position using the
①
“
” button. ③ Press the “ ” button again to set the end position.
◀▶
” button to display the progress bar during a recorded file playback.
3. The following message will appear. Move cursor to the “SAVE” button and press the “OK” button
to save the specific region.
from a recorded file.
portion
58 | AF-9400PV2R Users’ Manual
4.15 Switching Rooms
This function is helpful to get rid of your trouble. You don’t have to move the cables any more. Just
only pressing the button, you can switch rooms between the TV1 and the TV2. You can watch the
other room’s program and exchange the various configuration of TV such as Favorite channel,
Lock, Language, and etc.
1. Press the “
watch the other room’s program. At the other room, they can also watch your program.
” button. The programs of the TV1 and TV2 viewer are exchanged. You can
:
The function isn’t provided to TV2 viewer according to the default value.
viewer selects RoomChange to ‘Enable’ at the Setup-TV2 Control menu, TV2 viewer can
exchange programs. Refer to Chapter 5.3.8 TV2 Control for more information.
2. Press the “
” button to return to normal.
If TV1
4.16 Watching the Other Room
You can watch the other room’s program.
1. Press the “
spy the other room’s program.
viewer selects ShowTV1 to ‘Enable’ at the Setup-TV2 Control menu, TV2 viewer can view the TV1
program or VCR. Refer to Chapter 5.3.8 TV2 Control for more information.
(in case of TV1 viewer)” or “ (in case of TV2 viewer)” button. You can
:
The function isn’t provided to TV2 viewer according to the default value.
If TV1
Ch4. Operations | 59
4.17 Viewing Teletext
Teletext Service is text data service from Service Provider. It is available only when the program
provides teletext data service.
1. Press the “
“
▼” button, and press the “OK” button.
▲
” button. Teletext Service Data is displayed. Select the desired language using the
2. Select the page using the “0~9” buttons(100~899).
3.
Press the “EXIT” button to the previous screen.
4.18 Changing STB/TV
This function is used for receiving a signal through the RF modulator.
Press the “TV/STB” button. The signal reception path will change to RF modulator.
60 | AF-9400PV2R Users’ Manual
Ch1. Before You Begin | 61
Chapter 5
Settings
62 | AF-9400PV2R Users’ Manual
This chapter describes how to search for channels, edit channel, setup for language(OSD,
Timer, etc.), show tools, and etc.
The setting menus are different according to TV1 and TV2.
1. Press the “MENU” button to display the Menu OSD.
2. Move to the appropriate Menu using the “
” button, and then press the “OK” button to select
◀▶
the menu.
3. Move to the appropriate Menu using the “
” button, and then press the “OK” button to select
▲▼
the sub-menu.
4. If the password input window appears, enter your password using the “0~9” buttons. The
default password is 0000.
z
Press the “EXIT” button to return to the previous screen.
z
Press the “MENU” button to exit the setting menu.
z
The menu program shows buttons that can be used at every stage of setup.
z Depending on TV, the menu OSD is different. The indicates that the menu is
provided to only TV1 viewer. The
viewer.
z
Some menus ask to enter your password. The default password is 0000. If you select Menu
indicates that the menu is provided to only TV2
Lock to ‘No’ at the Setup-Lock Control menu, you don’t have to enter the password. Refer to
Chapter 5.3.6 Lock Control for the password setting.
5.1 Search Channel ()
You can set the antenna's properties and search channel.
z
Antenna Setting:
properties.
z
Automatic Search:
satellite automatically.
z
Manual Search:
channel manually.
z
Advanced Search:
channel.
System Setup :
z
:
The menu isn’t provided to TV2 viewer according to the default value.
viewer selects Search to ‘Enable’ at the Setup-TV2 Control menu,
channels. Refer to Chapter 5.3.8 TV2 Control for more information.
TV2 viewer
Ch5 Settings | 63
Sets the Antenna
Searches the
Searches the
Finds the specific
Sets Antenna angle.
If TV1
can search the
5.1.1 Antenna Setting ( )
You can set the antenna's properties such as satellite, tuner, transponder, LNB, DiSEqC, and etc.
Move to the Search Channel menu using the “◀▶” button, and press the “OK” button.
①
Move to the Antenna Setting sub-menu using the “▲▼” button, and press the “OK” button.
Enter your password using the
0~9” buttons. The default password is 0000.
“
z
z
z
z
1, 2,/Loop/ twin
Tuner :
LNB Power :
On, Off
22kHz :
DiSEqC :
None, 1.0, 1.1
On, Off
1. Select the Satellite name using the “
◀▶
” button.
2. Show the tuner value according to the tuner type at the Search Channel-System setup menu. (1,
2 for T1/T2, Loop for Loop, or Twin for Twin)
②
③
!
!
64 | AF-9400PV2R Users’ Manual
: If you select ‘T1/T2’ at the Search Channel-System setup menu, you should set the
antenna setting of ‘1’ and ‘2’ separately. Select ‘1’ to search the channels for ‘T1’,
and then select ‘2’ to search the channels for ‘T2’.
3.
Set the transponder value for the satellite
4. Set the LNB power and frequency type using the “
using the “◀▶” button.
” button.
◀▶
: When using Universal LNB, select Universal for LNB type (9750/10600 (MHz)).
Also, if you select Universal, 22kHz tone value is controlled automatically.
5. Select 22kHz Tone using the “
” button. When using 22kHz tone switch, select ‘On’.
◀▶
Otherwise, select ‘Off’.
6. Select the DiSEqC value using the “◀▶” button.
7. When you complete the setting, press the “Red” button to set the search mode.
8. Select the desired item using the “OK” button and press the “Red” button to search the channels.
9. When completing Channel Search, the following message will appear. Move cursor to the “OK”
button and press the “OK” button to save the changes.
Ch5 Settings | 65
5.1.2 Automatic Search ( )
After antenna setting, you can automatically search for satellites.
Move to the Search Channel menu using the “◀▶” button, and press the “OK” button.
①
!
to the Automatic Search sub-menu using the “
your password using the
0~9” buttons. The default password is 0000.
“
” button, and press the “OK” button.
▲▼
z
z
z
z
z
z
z
Moves to other satellite.
:
▲▼
: Moves to other column.
◀▶
: Selects the satellite
OK
: Starts to search the satellite.
Red
: Changes the satellite
Green
: Exits the menu.
MENU
: Returns to the previous screen.
EXIT
!
②
③
Move
!
Enter
1. Select the desired satellite using the “OK” button.
2. Move to the right column using “
” button, and then select the method using the “OK” button.
f
3. Press the “Red” button to search satellite.
: Please wait for finishing the Automatic Search. If you want to stop the Automatic
Search, press the “EXIT” button anytime. If Automatic Search is stopped or finished,
the searched information is automatically saved.
4. When Satellite Search is finished, the confirmation message will appear. Move cursor to the
“OK” button and press the “OK” button to save the changes.
66 | AF-9400PV2R Users’ Manual
5.1.3 Manual Search ( )
After antenna setting, you can search channel(s) from the selected satellite if you know the
transponder information.
Move to the Search Channel menu using the “◀▶” button, and press the “OK” button.
①
!
Move to the Manual Search sub-menu using the “▲▼” button, and press the “OK” button.
Enter your password using the
0~9” buttons. The default password is 0000.
“
z
z
z
z
z
1, 2,/Loop/ twin
Tuner :
Frequency, symbol rate :
the value using the “0~9” button.
Polarization:
FEC:
Network Search & FTA only:
Vertical, Horizontal
Auto, 1/2, 2/3, 3/4, 5/6, 7/8
You can edit
Yes, N o
!
②
③
1. Select the desired satellite using the “
◀▶
” button.
2. Show the tuner value according to the tuner type at the Search Channel-System setup menu. (1,
2 for T1/T2, Loop for Loop, or Twin for Twin)
: If you select ‘T1/T2’ at the Search Channel-System setup menu, you should set
the antenna setting of ‘1’ and ‘2’ separately. Select ‘1’ to search the channels for ‘T1’, and then
select ‘2’ to search the channels for ‘T2’.
3. Enter the Frequency & Symbol Rate value using the “0~9” button.
4. Select the Polarization, FEC, Network Search, and FTA Only value using the “
◀▶
” button.
5. When you complete the setting, press the “Red” button to search the channel.
6. When Channel Search is finished, the confirmation message will appear. Move cursor to the
“OK” button and press the “OK” button to save the changes.
Ch5 Settings | 67
5.1.4 Advanced Search ( )
You can find the desired channel by entering Video, Audio and PCR PID directly.
Move to the Search Channel menu using the “◀▶” button, and press the “OK” button.
①
!
Move to the Advanced Search sub-menu using the “▲▼” button, and press the “OK” button.
Enter your password using the “0~9” buttons. The default password is 0000.
z
z
z
1, 2/Loop/ twin
Tuner :
Video, Audio, PCR PID:
the value using the “0~9” button. Refer to
chapter 4.3 Viewing Program
Information
Red:
information using the “0~9” button to
search the missing channel.
for getting the values.
You can enter directly the channel
You can enter
!
②
③
!
1. Select the desired satellite and tuner number using the “
◀▶
” button.
2. Enter Video, Audio and PCR PID directly using the “0~9” button.
3. When you complete the entering PID values, press the “Red” button to search the missing
channel.
5.1.5 System Setup ( )
You can set the angle of the antenna by entering the values directly.
Move to the Search Channel menu using the “◀▶” button, and press the “OK” button.
①
!
to the System Setup sub-menu using the “
password using the
0~9” buttons. The default password is 0000.
“
” button, and press the “OK” button.
▲▼
z
Longitude, Latitude :
value using the “0~9” button.
!
You can enter the
Move
②
!
Enter your
③
68 | AF-9400PV2R Users’ Manual
1. Enter the Longitude and Latitude value directly using the “0~9” button.
2. When the entering angle values are finished, the confirmation message will appear. Move
cursor to the “OK” button and press the “OK” button to save the changes.
5.2 Edit Channel
You can edit channel(s), favorite channel(s), transponder and remove satellite. The setting menus
are different according to TV1 and TV2.
z
Edit Channel:
Locks/deletes/moves/renames
channel.
z
Edit Favorite:
favorite channel.
z
Edit Transponder:
Creates/edits/deletes transponder
and
satellite.
Remove Satellite:
z
channel(s).
Creates/edits
Removes the
5.2.1 Edit Channel
You can edit(such as lock, delete, move, and rename) all channels or each channel. Refer to
Chapter 4.9.5 Editing Channels for more information.
Ch5 Settings | 69
5.2.2 Edit Fa vorite
You can create and edit favorite channel list(s) or group(s). Refer to Chapter 4.10 Managing
Favorite Channel Lists for more information.
5.2.3 Edit Transponder ( )
You can create, edit, and delete transponder and satellite. The menu is provided to only TV1
viewer.
1.
Move to the Edit menu using the “◀▶” button, and press the “OK” button.
①
Edit Transponder sub-menu using the “
password using the
2. You can use the “
3. At the satellite list, you can add a new satellite using the “Green” button, and you can rename a
satellite using the “Red” button. You can also delete the satellite using the “Yellow” button for the
only added satellite. At the transponder list, you can edit, add, or delete a transponder using the
“Red”, “Green”, or “Yellow” button.
4. Whenever you press the “MENU” or “EXIT” button after editing transponder, the confirmation
message will appear. Move cursor to the “OK” button and press the “OK” button to save the
changes.
0~9” buttons. The default password is 0000.
“
” button to switch the satellite and transponder list.
◀▶
” button, and press the “OK” button.
▲▼
Move to the
②
!
Enter your
③
!
70 | AF-9400PV2R Users’ Manual
5.2.4 Remo ve Satellite ( )
You can remove the channel(s). The menu is provided to only TV1 viewer.
1.
Move to the Edit menu using the “◀▶” button, and press the “OK” button.
①
!
Remove Satellite sub-menu using the “
password using the
2. Press the “OK” button to select the satellite.
0~9” buttons. The default password is 0000.
“
” button, and press the “OK” button.
▲▼
Move to the
②
!
Enter your
③
!
3. Press the “Red” button to select the deleted channel(s) for the satellite.
4. Whenever you press the “MENU” or “EXIT” button after selecting the channel(s), the
confirmation message will appear. Move cursor to the “OK” button and press the “OK” button to
save the changes.
Ch5 Settings | 71
5.3 Setup
You can setup additional function such as Language Setting, OSD Setting, Output Setting, Time &
Timer Setting, Lock Control, Media Highway EPG, and TV2 Control.
The setting menus are different according to TV1 and TV2.
z
Language Setting:
language.
z
OSD Setting:
z
Output Setting:
devices.
Time & Timer Setting:
z
and timer.
Lock Control:
z
Media Highway EPG:
z
media highway EPG.
TV2 Control :
z
Selects the
Sets the OSD.
Sets the connected
Sets the time
Sets the system lock.
Views the
Sets the TV2 control.
Move to the Setup menu using the “◀▶” button, and press the “OK” button.
①
!
desired sub-menu using the “
” button, and press the “OK” button.
▲▼
5.3.1 Language Setting
You can select the Menu Language, Audio, and Subtitle Language.
z
Selects the desired value.
:
◀▶
z
▲▼: Moves to other items.
z
: Moves to the next setting.
Red
z
: Exits the menu.
MENU
: Returns to the previous screen.
EXIT
z
Move to the
②
!
72 | AF-9400PV2R Users’ Manual
5.3.2 OSD Setting
You can set the interval for the program information bar hide-out.
z
Selects the desired value.
:
◀▶
z
▲▼: Moves to other items.
z
z
: Exits the menu.
MENU
: Returns to the previous screen.
EXIT
5.3.3 Output Setting
You can set the connected devices such as TV screen mode, Dolby AC-3 decoder, and etc. The
setting items are different according to TV1 and TV2.
z
Selects the desired value.
:
◀▶
z
▲▼: Moves to other items.
z
z
: Exits the menu.
MENU
: Returns to the previous screen.
EXIT
:
TV Screen Mode
5.3.4 Time Setting
Ch5 Settings | 73
You can set the current time. Refer to
Chapter 3.2 Time Setting
for more information.
5.3.5 Timer Setting
You can set the timer.
z
◀▶: Selects the desired value.
z
▲▼: Moves to other items.
z
: Enters the time.
0~9
z
: Exits the menu.
MENU
: Returns to the previous screen.
EXIT
z
5.3.6 Lock Control
You can prevent wrong usage by using the Install/Menu/IRD Lock and Password.
z
◀▶: Selects the desired value.
z
▲▼: Moves to other items.
z
: Exits the menu.
MENU
: Returns to the previous screen.
EXIT
z
74 | AF-9400PV2R Users’ Manual
5.3.7 Media Highway EPG ( )
You can view the media highway EPG. The menu is provided to only TV1 viewer.
z
◀▶: Selects the desired value.
z
▲▼: Moves to other items.
z
z
: Exits the menu.
MENU
: Returns to the previous screen.
EXIT
5.3.8 TV2 Control ( )
You can set the TV2 control menu. The menu is provided to only TV1 viewer.
z
z
z
z
z
z
z
Enables TV2 viewer to
Search:
search the channels.
Enables TV2 viewer to edit the
Edit:
channels.
Enables TV2 viewer to record
PVR:
the programs and play the files.
PlayTV1Files:
to play the TV1 recorded files.
Room Change:
to switch the room with TV1 viewer.
ShowTV1:
watch the program of TV1.
Factory Setting:
viewer to restore to the default setting.
Enables TV2 viewer
Enables TV2 viewer to
Enables TV2 viewer
Enables TV2
Ch5 Settings | 75
5.4 T ools
You can view the product information, restore to the default setting, upgrade the program, and etc.
z
Information:
z
Factory Setting:
setting.
z
Software Transfer:
This menu is provided only to TV1.
Utility, Game:
z
utilities(calendar and calculator) and game.
Shows the product version.
Restores to the default
Transfers the program.
Provides the convenient
Move to the Tools menu using the “◀▶” button, and press the “OK” button.
①
!
desired sub-menu using the “
” button, and press the “OK” button.
▲▼
Move to the
②
!
5.5 Common Interface ()
You can view the current status of CI module.
z
z
z Dual descrambles: Shows two
z Slot option:
Move to the Common Interface menu using the “◀▶” button, and press the “OK” button.
①
!
Move to the desired sub-menu using the “▲▼” button, and press the “OK” button.
Shows the information about
Slot 1:
Slot1.
Shows the information about
Slot 2:
Slot2.
scrambled channels from one CAM.
available only when the CAM provides
this service.
PCMCIA(CAM) slots.
Set the authority of two
It is
②
!
76 | AF-9400PV2R Users’ Manual
5.6 HDD
You can view the hard disk information, the hard disk format, the recording, and the instant
recording.
z
HDD Information:
information such as the model name, the
remained storage, and etc.
z
HDD Format:
z
Recording:
Instant Recording:
z
temporarily.
z
Descrambling:
scrambled file.
Shows the hard disk
Formats the hard disk.
Records the programs.
Records the programs
Descrambles the
Move to the HDD menu using the “◀▶” button, and press the “OK” button.
①
!
desired sub-menu using the “
” button, and press the “OK” button.
▲▼
Move to the
②
!
Ch1. Before You Begin | 77
Chapter 6
Appendix
78 | AF-9400PV2R Users’ Manual
6.1 T rouble Shooting
If the product does not work properly after checking it, please
open the product. It may result in a dangerous electric shock and will invalidate your warranty
Problem
Possible Causes
contact your local dealer
What to do
. Don't
The display on front
panel does not light up.
No picture, no sound.
The remote control unit
(RCU) does not working.
Bad picture or noisy
sound in the TV or radio
mode.
The main power cable is not
connected.
Wrong connection of the audio/video
output of the product to TV.
TV power off.
The product is standby mode.
No or Bad signal message appears. Connect the antenna cable correctly.
No Batteries. Change the batteries (both).
The RCU is incorrectly aimed. Aim the RCU properly to the product.
The product is standby mode.
Bad reception of the signal.
Check that the main power cable is
plugged in to the wall outlet.
Connect the audio/video output
of the product to TV correctly.
Turn TV on.
Change the mode to the normal
mode.
Change the mode to the normal
mode.
Make sure the dish and LNB are clean
and correctly adjusted.
6.2 Specification
1. Tuner & Demodulator
Ch6. Appendix | 79
RF input Connector
RF Loop-through Connector
RF Frequency Range
Input Impedance
Input Signal Level
Loop-through Gain
IF Frequency
LNB POWER
LNB Control DiSEqC 1.0, 1.1, 1.2 , USALS Available
Band Switch Control 22KHz Tone
22KHz Tone
Demodulation QPSK
Input Symbol Rate 2 ~ 45MS/s
Spectral Inversion Auto
Punctured Codes 1/2, 2/3, 3/4, 5/6, 7/8, Auto with Constraint Length K=7
F-type X 2 female
F-type X 2 female
950Mhz to 2150 MHz
75 Ω normal
-65 dBm to -25 dBm
0 dB Typical / ±5dB Max
Zero IF
Vertical : 13.0Vdc
Horizontal : 18.0Vdc
Current : 500mA(MAX)
Overload Protection
±
±
0.2V
2KHz
Frequency : 22
Amplitude : 0.6
2. A/V Decoding
Transport Stream
Profile Level 2 of MPEG-2 MP@ML (PIP)
Input Rate 81Mbit/S max.
Aspect Ratio 4:3, 16:9 , 4:3 Letter box
Video Resolution 720 x 576(PAL), 720 X 480(NTSC)
Audio Decoding MPEG/Musicam Layer 1,2 & 3
Audio Mode
Sampling Rate 32, 44.1 & 48 KHz
Graphic Engine
MPEG-2 ISO/IEC 13818
Transport Stream Specification
Single Channel / Dual Channel
Joint Stereo / Stereo
2 OSD layer plane
1 back ground plane / 16Bit RGB color
80 | AF-9400PV2R Users’ Manual
3. HDD
Type ATA – UDMA66
HDD Size 3.5 inch of 80Gbyte and More
HDD of VENDOR Samsung, Seagate, Maxtor
4. Conditional Access System
PCMCIA 2 slots of DVB CI standard
Smart Card Reader 1 Smart card reader for embedded CAS (*optional)
5. A/V Data In/Out
TV SCART
VCR SCART
SVHS Video Output (Y/C)
RCA VIDEO( for TV1) Video Output (CVBS)
RCA AUDIO R/L(for TV1) Volume & Mute Control
RCA VIDEO( for TV2) Video Output (CVBS)
RCA AUDIO R/L(for TV2) Volume & Mute Control
SPDIF
USB USB2.0
RS-232C
Video Output (CVBS, RGB)
Audio Output (L,R)
Video Output (CVBS)
Video Input (CVBS,RGB)
Audio Output (L,R)
Audio Input (L,R)
Optical
Digital Audio or
Dolby AC-3 Bitstream output
Transfer Rate 115.2Kbps
9 Pin D-sub Type
Ch6. Appendix | 81
6. 0/12V
0/12V 12V, 50mA
7. RF RCU Receiv er
RF 433.92MHz(30+ meters)
8. RF-Modulator
RF-Connector 75Ω, IEC 169-2,Male/Female
Frequency 470 to 860MHz
Output Channel CH21~69 for the Demodulator
TV Standard PAL BG/I/DK , NTSC
Preset Channel CH 21 (or TBD), Changeable by Menu
9. Power Supply
Input Voltage AC 100 ~ 240V, 50~60Hz
Type SMPS
Power Consumption Max 50W
Separate Internal Fuse and Chassis
Protection
Grounding The Input shall have
lightening or Electric Shock Protection
10. Environment
Operating Temperature +5 ~ +50
Storage Temperature -40 ~ +65
℃℃
℃℃
11. Physical Specification
Size(W X D X H) 370 x 270 x 60 mm
Weight(Net) About 3.5kg
82 | AF-9400PV2R Users’ Manual
ARN/AF-9400PV2R/EOSD2.0_REV1.2
Loading...