Ariens PRM 22000 User Manual

Specifications and Main Features

  • Model of the machine is the Ariens 22000 series of models.
  • The machine can come with option of 4 horsepower,5 horsepower and 6 horsepower Tecumseh engines.
  • These models were manufactured between the years 1969 to 1978.
  • Machines weight differs based on the particular type of machine configuration.
  • The fuel type that can be used for these machines are unleaded gas.
  • The machines can use the Ariens Sno-Thro oil 5W-20 or Ariens Gard-N-Yard oil SAE-30.
  • The machine contains an engine which can run between the RI PM rating of the 3550 to 3650.
  • The machine has a tractor drive system which can come with attachable features.
  • Interlock system is built within the machine to decrease the chances of injury to the operator.
  • The machines has the following controls, - Speed Selector which functions to control the speed of the tractor, Throttle Control which controls the speed of the engine, Clutch which acts as a lever to turn on the tractor, Choke which allows to start the engine, Deflector which allows the machine to set the height of snow during discharge, Hand Crank which aids in turning the chute that aids in discharge.
  • For the protection of the machine shear bolts which are adjustable, and scraper blades can be used to replace for the damaged parts during operation.

Frequently Asked Questions

Q1: Which particular oil can be used for the engines?

A1: Ariens Sno-Thro oil 5W-20 oil can be used with a snow attach for the machine while the Ariens Gard-N-Yard oil SAE-30 oil type can be used while connecting a lawn attachment.

Q2: In which ways do I proceed to start up the engine?

A2: Firstly, engage the throttle into the fast position, proceed to pull the recoil starter or utilize the included electric starter. Secondly, ensure the speed selector is in neutral position, rotate the ignition key to the run position and finally engage the choke.

Q3: Am I allowed to use the auger without utilizing the interlock?

A3: Under no circumstance should the interlock lever be disabled while the auger and blower are on as it poses a serious danger risk of the engine stopping while operational.

Q4: How do I carry out a shear bolt replacement procedure?

A4: Identify the damaged shear bolt and then take it out, after which you should insert a new Ariens shear bolt into the designated area.

Q5: What actions do I take if it is impossible for the speed selector lever to stop from moving?

A5: Place the speed selector lever in between the holes in the quadrant, it will then be easier for you to tighten the adjustment nut and compress the spring, once that is completed proceed to turn the screw back one full rotation to ease the tension.

Q6: What are the steps for ensuring tire pressure is maintained?

A6: Each tire should be monitored and maintained at an ideal pressure of 12 pounds per inch, and all of this should be done and repeated after every season.

User Manual

Page 1
Ariens PRM 22000 User Manual
Page 2
Page 3
Page 4
Page 5
Page 6
Page 7
Page 8
Page 9
Page 10
Page 11
Page 12
Page 13
Page 14
Page 15
Page 16
Page 17
Page 18
Page 19
Page 20
Page 21
Page 22
Page 23
Page 24
Page 25
Page 26
Page 27
Page 28
Page 29
Page 30
Page 31
Page 32
Page 33
Page 34
Page 35
Page 36
Page 37
Page 38
Page 39
Page 40
Page 41
Page 42
Page 43
Page 44
Page 45
Page 46
Page 47
Page 48
Page 49
Page 50
Page 51
Page 52
Page 53
Page 54
Page 55
Page 56
Page 57
Page 58
Loading...