Ariens PM-24-93 User Manual

<7^rlens 41

Series

Sno-Thro ®

Parts

Manual

A Message to Ariens Parts Manual User

Your Ariens Dealer will be happy to supply any
service or advice which may be required to keep your
Ariens equipment operating at peak efficiency. He
stocks genuine Ariens parts and lubricants;
manufactured with the same precision and skill as the
original equipment. His factory trained staff is kept
well informed on the best methods of servicing Ariens
equipment and is ready and able to service you. If

Introduction

The information contained herein is intended for use
by Ariens Dealer’s trained servicemen and serves as
a supplement to and reminder of training sessions
conducted by Ariens Company. Before you attempt
any repair, adjustment or maintenance project, be
certain that you have read and fully understand the

instructions in your Owner’s arid Repair Manuals.

Understand and follow each Danger, Warning,
Caution and all instructions exactly as given. Also be
sure that you have all tools, replacement parts and
other materials required to complete the project.

A network of Ariens Dealers and Distributors is

maintained in order to assure you of an adequate
supply of replacement parts and technical assistance.
Your local Ariens Dealer is required to order parts
through his distributor. When replacement parts are

required, use only genuine Ariens parts. Failure to
do so may result in product malfunction and possible

injury to operator and/or bystander.

engine repairs or sen/ices are required, they can be
obtained from an Ariens Dealer or from an authorized
engine manufacturer’s service center. If service is
required, be prepared to supply the service person
with the Model Number and Serial Number of the
equipment and engine, as well as a full description of

the problem encountered.

NOTE: All references to “Left”, “Right”, “Front” and

“Rear” are given from operators position.

NOTE: The descriptions and specifications

contained in this manual were in effect at the time the

manual was approved for printing. Ariens Company
reserves the right to discontinue models without
notice and without incurring obligation. The
equipment described within this manual may not be
identified as either standard or optional and various
illustrations may not all be applicable to your
particular unit. If you have questions, always check
with your Ariens Dealer.

NOTE TO ARIENS DEALERS: Refer to your current

Parts Price List for suggested parts stocking. Service
training for dealers is available at the Ariens Service
School. See your Ariens Distributor for the latest
school schedule.

Contents

Models

Decals....................................................................2

Handlebars and Controls
Speed Selector and Wheels

........

...............................

..................................

Engine and Belt Drive............................................

Reduction Drive
Friction Wheel Drive

.................................................

....

.................................... 12

10

Auger/Impeller................................................. .14

Gear Case - Cast Iron......................................... 16

Gear Case - Aluminum

Brush.......................

Altemator/Headlight.........................................

120 Volt Starts.........:

Tecumseii Ak Cleaner.......................................

SlicerBar...

......

...:;

.......................................

......

....................................

.......................................

.........................................

18

22
24
/25

.26

...27

Model Number - Sno Thro.

Serial Number - Sno Thro.

Model Number - Engine

Serial Number - Engine

____

___ _

Model 924080 (ST T8)

4
6
8

8HP Sno-Thro Tractor
Serial No. 000101 and up

Model 924081 (8T824S)

8 HP 24" Sno-T^ro
Serial No. 000101 and up

Model 924082 (ST824)

8 HP 24"SnoThré
Serial No. 000101 and up

Model«i4dB3<ST828)

8HP28’’.Sno-1Ttio .

serial No. 000101 end up

MoM 924084 (^1032)

TOHP32”SHo-Thre

Serial No. OOOIoràndUp

Model 924086.(ST1286)

12HP 36” Sno-Thro
Seriat'No, 000101 and tip

Model 924086 (ST1028)

-10HP 28" Sno-Thro
Serial No. 000101 and up

Model 924087 (ST1232e)

l2HP32”SnoThto

Serial No. 000101 and up

Model 924088 (ST4028^

10HP28’SnQl11K>

SeriáIÑo. OOOIdl iuidup

6HP 24” SnóThfo

Serial No. 000101 and up.

ModM 9240901ST9^

38'SnoThto

SeiiahNO. 000101 dndup

NOTE; For models 924087,88,89,& 90 see page 20.
NOTE: Mosi hardware descriptions áre given in

decimals. Referió the following table to find the
equivalent ih fractions:

This manual covers the models listed. Specific Model

and Serial Numbers of your unit and attachment are

on a label on the unit. Record these numbers in the

Ì

space provided and use them whenever parts or
service are required.

Attachments

Model 824004 - 36” Rotary Brush
Serial No. 000501 and up

How To Order Repair Parts

This Parts Manual is arranged for easy identification
of genuine Ariehs Service parts that are illustrated

showing their relationship to one another. Item
numbers in the illustrations correspond to Item
numbers in the first column of the parts list and are

followed by the Ariens Part Number, Description and

Quantity with variations between models and/or serial
numbers designated in the part description. SN
000000> means this serial number and up, with SN
<000000 meaning up to this serial number.

.125 = 1/8
.188 = 3/16
.250 = 1/4
.312 = 5/16
.375 = 3/8
.438 = 7/16
.500 = 1/2

.562 = 9/16
.625 = 5/8
.688 = 11/16
.750 = 3/4
.812 = 13/16
.875 = 7/8
.938 = 15/16

Order parts from your nearest authorized Ariens
Dealer. For prompt service when ordering parts,
provide the following information.

1. MODEL AND SERIAL NUMBERS OF

EQUIPMENT

2. PART NUMBER (not Item Number)

3. DESCRIPTION

Ariens Company 1993

QUANTITY REQUIRED

Part No. PM-24-93

Supersedes PM-24-92

Printed in U.S.A. 12/93

SAFETY INSTRUCTIONS

Decals

Models 924080,81, 82, 83, 84,85,86,87,88,89,90

Cullens ST8

©

15

This engine
has provisions
for electric
starter and
alternator/

light kits.

14

This engine
has provisions
for electric
starter kit.

13

Cast Iron Bore

12

Attention

When using summer
attachments, remove
heater box and
install air cleaner.

Engine Instructions

CAUTION:

Fur your pursoiuil protoctlon.

A

toad all salt/ty nottrs In otujino
uv'/noi's mamitil.

OPERATION.

For (tolalhMl lubrlcallon. stait­Intj Si upt’ratlnt) Instructions.
SCO irn()ln(’ owner's manual S,
e(liil|)inirnt mti.'s Instruclloti.

LUBRICATION;

Summot...................SAE 30 Oil

Winter

...................

SAE 5W-30 on

ROTATING
PARTS
Stop engine &
remove ignition
key before
clearing.

10

9

Decals

Models 924080,81,82,83,84,85, 86, 87, 88,89, 90

ITEM
NO.

1 07703600 Decal 924-Switch (87,88,89)

2 07769000

3

4

5 07860300
6 07860400

7 07864400
8
9

PART
NO.

07763800
07763700
07763600
07763500 Decal 824S (81) 1 07895800 DecaNnstruction-Geimany 1
07763400 Decal 828 (83) 1 11 оте4з2оо Ней Surface Decal
07763300
07763200 Decal 1236 (85, 65) 1
07758300 Decal 1028 (88) 1
07703100 Decal 1232 (87) 1

07799100 Decal-Danger 1
07799200

DESCRIPTION QTY ITEM

Decal-Safety Instruct.
Decal-Dash (80, 81,82)
Decal-Dash (83,84, 85,86) 1
Decal 824 (80,82,89) 1

Decat1032(84)

Decal Choke
DécalThrottIe
Decal Differential Lock

Danger Decal Rotating Parts 1 07781300 Decal 12 HP & Primer (85, 87) 1

PART

NO.

1 10 07882800
1
1

1 12 07797600 Decal-Cast iron Bore

13
14 07799600

1

15 07787300

1

1

NO.

07883200
07883400 Decal-Engine Instruction Fi
07883900
07886500

07860700

07787400

DESCRIPTION QTY

Decal-Instruction 1

Decal-Instruction French

Decal Attachments (Sweden)
Decal-Attachments-Norway) 1

Elect Start Decal (84,65, 86) 1

Provisions Decal

(80,81,82,83)

Decal 8 HP & Primer

(80,81,82,83,89)

Decal 10 HP & Primer 1

(84, 86,88)

1
1
1

1
1

1

1

Handlebars and Controls

Models 924080,81,82,83,84,85^

Handlebars and Controls

Models 924080, 81, 82, 83,84,85,86

ITEM
NO.

1

2

3
4
5 06504000
6 02464700
7 02463300
8
9 07403900

PART
NO.

DESCRIPTION

07518700 Handle Grip
02462900 Upper Handlebar
06507800 Nut-Fig .321-18 PI
02463200 Bracket Rod (83, 84, 85, 86)

Nut-Lk-Ctr .250 x 20 PI
Handle Pivot
Bracket, Chute Crank 1

02462100

Clutch Lever
Scr-Tap 12-14 X 1.50 4

Crovh PI Bt .080 X .73 X 3.06 WId 20
10 07511800 Bumper
11
12

06703400 Pin Cotr .09 X .05 PI
06406500

Wshr-FI-StI 2

.268 X .562x .046 PI 50

13 02461800 RH Lever

(80, 82, 83, 84, 85, 86)

02465100

14 02462300

RH Lever (81)
LH Lever 1
80, 82, 83,84, 85, 86)

02465200 LH Lever (81)

15

16 08325500

05910400 - Bit-Hex .25-20 x .38 PI Gr 2

Sg-Tens

.051 X.50x5.12 WId 10.4

17 02463400

18 05516100

Latch Arm
Bshg-FIg

.265 X.437 X.339 X.62

19 05900100

20 08310900

Bit-Hex .25-20 x .75 PI Gr 2

Sg-Tens

.48 X.44x1.75 WId 9
21 06519900
22 05803300

Nut-Crown .312-18

Pin Roll.156x.75
23 05800900 Pin Roll .125 X 1.00
24 02463000
25

06405700 Wshr-FI-StI

Rod

.323 X .625 X .062 PI

26

05516200 Bshg-FIg

.325 X .465 X .333 x .685
27
28 07509500
29 06517300
30
31
32 05905600
33

02464300

Traction Clutch Rod
Snap Bushing
Nut-Panel .625-32 Greco

07517700

Cap-Ignition Switch 1

02460700 Key

Bit-Hex .25-20x1.25 PI Gr2 4
52407100
52407200

Panel w/Decal (80, 81,82)

Panel w/ Decal

(83, 84, 85, 86) 75

34 06301900
35 52406900
36

02464800 Shorting Wire

37 07401500

Wshr-Lock Int .625 .045 PI 1

Switch Assembly

Scr-Tap .25-20 x .370

Hwh PI Tr

38

01054200 Adapter Spacer

QTY

, 1

ITEM
NO.

39 02408600 . Spacer

2

40 06001200

1

2

41 02213500

1

42 02422800 Clutch Engagerrient Yoke 1

2

43 06700100

2

44
45

2

46 08309400
47 02427200 Clutch Fork 1

2

48

2

PART
NO.

DESCRIPTION QTY

Scr-Set .32-18x38 1

Skhcupnl Oh

Rod Adapter 1

Pin Cotr .09 x .75 PI 1
06700200 Pin Cotr .09 X 1.0 PI 2
02406900 Fork Pivot Rod 1

Sg-Tens

05900400 Bit-Hex .038-16x1.00 PI 4

49 52404700 Spring Assembly 2
51 05902200

1

06504200

Nut-Lk .312-18 Gr A PI

Bit-Hex .31-18 X.75 PI Gr2

52 02422700 Adapter 1
53 06506200 Nut-Lk-Nyl .312-18 PI 1

1

54 03201000 Lever Clutched 1
55 02458400 Jumper (83, 84, 85, 86)
56

1

57 05503700 Bshg-FIg Ny 1

2
2

58 05802600
59

1
1

02442900 Lever 1

.500 X.625 X.312 X.750

Pin Roll .156 X.88 1
08318300

Sg-Tens 1

.091 X.56x6.12 WId 40
60 00227000 Clutch Chain 1
61 06702400
62 07516700 Hole Plug 1

1

63 02463700
64 07508300 Knob

2

65 01123800

2

1

66

1

67

2

02463900

08320900 Sg-Comp .187 X .56 X 1.62 1

68 06503900

4

69 06404300

1

70 02463100 Spacer 1

1

71

1

02463800 Cap Lever (83, 84, 85, 86) 1

72 05711300

73 06202300

1

Pin Cot .12 X .75 PI

Attachment Clutch Rod

Friction Washer 1

(83, 84, 85, 86)

Pressure Flange

Nut-Lk .375-16 Gr A PI

(83, 84, 85, 86)

Wshr-FI-StI .406 X .812 X .065 1

PI (83, 84, 85, 86)

Rg-Rtng-Ext .875 X .010 1

BIt-Rdhdsqnk 2

.31-18x1.50 PI

74 06205100

1
1

02462800

BIt-Rdhdsqnk 2

.31-18 X 2.75 Shtpl

LH Lower Handlebar 1

02462700 RH Lower Handlebar 1

76

1

77 06501800

1

78 06300400 Wshr-Lock .375 x .115 Hvy PI

1

06901200 Clamp

Nut-Hex .375-16 2

79 06400800 Wshr-FI-StI

1

.438 X 1.0 x .083 PI

1

1

4
1

1

1
1

1

1

1

2
4

3

Speed Selector and Wheels

Models 924080,81,83,84,85,{

Speed Selector and Wheels

Models 924080,81, 82, 83, 84,85, 86

ITEM
NO.

1 07516700
2
3 07509600
4 02444800
5 08318400 Sg-Tens 1

6
7
8

9 06504000 Nut-Lk-Ctr .250-20 PI

10 05919200 Bit-Hex .31-18 X 3.50 PI Gr 2 1

11 06700100 Pin-Cotr .09 X .75 PI 1
12 02465700
13 06503100 Nut .312-18 PI
14
15 06700100
16 02449300
17
18 02423200
19
19a 02401800

20
21
22
23 07401400

PART
NO.

05708600 Rg-Rtng-Ext .500 x .015 1

05913200 Bit-Hex .25-20 X 1.00 Gr 2
06504200 Nut-Lk .312-18 Gr A PI 3
02462600 Pivot 1

02465600 Lower Shift Rod 1 07126000

01215100 Clevis Pin 2 27 02443000 Bottom Cover 1

02401900 Frame 1 29 01036600

02402400 Bolt Strap (85) 2 31 06702600 Pin Cotr .18x1.0 PI (82, 89) 2
02411500 Spacer 1 32 00337700
05913600 Bit-Hex .31-18x3.00 PI Gr2 1
02423100

DESCRIPTION QTY

Hole Plug 1 24

Knob
Rod

.055 X .33 X 1.31 Wld7 07108700

Upper Shift Rod 1

Pin-Cotr .09 X .75 PI 3 07121900 T/Whl Assy (80, 82, 83, 86) 2
Shift Link

Lever Shift Rod

Bolt Strap

Bracket Shift Lever
Scr-Tap

.312-18 X.50 HwhPI Tr

ITEM
NO.

1

25 05917300

1

26 07105000

1

1

1

2

1

28

2 30

1

5

33 07406300 Scr-Tap .500-20 x .62

PART
NO.

05903900 Bit-Hex 1

07103700 Tube (80, 82, 83, 86) 2

07121500

07107600 WhJ (80, 82, 83, 86)
07107700 Whl(84,85) 2
07125000 Tire (81)
07121800 Tire 4.80-8 Nhs 2

07121600 Tire (84,85) 2

07121700 T/Whl Assy (84, 85) 2

06507000

02403300 Spindle Cup

07508700 Hole Plug (81)

DESCRIPTION QTY

.31-18X.50 HwhPI Tr
Bit-Hex 25-20 X 1.75 Gr 2 (81)2
Tube (81) 2

Tube (84, 85) 2
Rim & Hub Assembly 2

4.10/3.50x6(81)

(80, 82, 83,86)

WhI (81)

Nut-Lk Top .250-20 PI (81) 2
Pushnut

Hub Cap

(80, 82, 83, 84, 85, 86)

2

2

2

1
1

1

2
8

Engttw and Belt Drive

Models 924080,81,82,83,84,85,86,

Engine and Belt Drive

Models 924080,81,82,83,84,85,

ITEM
NO.

1 06501500
2

3 02458700 Spacer (85)
4

5 02425300 Belt Finger 1 32 02457400
6 06400200 Wshr-FI-StI 1 33 06400700 Wshr-FI-StI 1

7 06303200 Wshr-Lock ext .313 x .030 PI 2 34 06504200
8
9

10

11

12

13

14
15
16

17
18

19
20 07304900 Ply-V 8.00 X 1.0 W/Key Clark 1
21 07206600 V-Belt (80, 82, 83, 84, 86)) 1

PART
NO.

06300300
06301800 Wshr-Lock Int 4

08223300

08225500

08227500

05905300 Bit-Hex .31-24 X .75 PI Gr5 2 35
06001200

02402100
02435700 Engine Sheave

06601800 Key-Str .25 X 1.75 X .25 1 40
07404900
06406500 Wshr-FI-Stl 1 .80x.73 x 3.06Wld20

02440600
02450100
07208600

07210800
07213000 V-Belt (85) 1 45
02450700 RH Support (85) 1 Hwh PI Tr
07401500

02459700

07209800 V-Belt (81) 1
07213100 V-Belt (85) 1

DESCRIPTION QTY ITEM

NO.

Nut-hex .312-18
Wshr-Lock .312 ID Heavy PI

.313 X .030 PI (85) 25

8HP Tec Engine

(80, 81, 82, 83, 89) (83,84,85,86)

Engine-1 OHP Tec 18

Watt Altr (84, 86, 88) 29

Engine-Ohsk 120Tec 1

W/18Watt(85) 31

.38 X .875 X .083 PI

Scr-Set

.32-18 X .38 Skhcupnl Oh 37

Engine Sheave (81)

(80, 82, 83, 84, 85, 86)

Scr-Tap .25-20 x .50 Hwhpl

.38 X .875 X .083 PI 42
Belt Cover
LH Support (85)

V-Belt (82)
V-Belt(81,83, 84, 86) 1

Scr-Tap

.250-20 X .37 Hwh PI Tr
Plate (85)

4

22 ■ 07006000 Blt-Serrdhd SI .31-18 x .75 PI 3

4

23 07307000 Ply-V 9.0 X 1.25 3 Bit 1
24

26 06504000

4

1

27 02423600

1

28

30

4

36 02453700 Idler Arm

1 38 01026000 Wave Washer
1

39

2 41 08309400

1 .500 X.625 X.312 X.750
1

43

1 44

5 46 02435300 Return Clip

47 06700100

1

48
49

PART
NO.

024380100
05902800

06507800

05906900

02434800

01213100 Bearing Spacer 1

01103100

06507700

06405200

06700400

05503700

02442800
08317200

07405400

02434700
02435400

DESCRIPTION QTY

Hub

Bit-hex .25-20 X .50 PI Gr 2
Nut-Lk-Ctr ,250-2. PI 2
Belt Retainer

Nut-FIg .312-18 PI

Bit- Hex .31 -18x1.25 PI Qr 2
Idler arm

Idler

.312X.734X.065 PI
Nut-Lk .312-18 Gr A PI
Spacer

Nut-Lk-Nyl .625-18 PI

Wshr-Fl-StI

.382 X .812 X .24 PI
Pin Cotr ,12x1.0 PI
Sg-Tens

Bshg-FIg Ny

Activating Shaft
Sg-Tens

.047 X .44 X 3.37 WId 1.47

Scr-Tap 10-24 X.375 2

Pin Qr .09 X .75 PI
Bracket

Clevis Pin

1

2

1

3
2

1

2

2

1
1
1
1
1

1

1

1

1
1

1
1
1
1

Reduction Drive

Models 924080,81,82,83,84,85,86

Reduction Drive

Models 924080,81, 82,83,84,85,86

ITEM

NO.

1

2
3 01202300

4

5

6

7 06505600 Nut-Lk-FIg .250-20 PI 8
8 02404500 Hex Shaft

9 06601500 Key-Wdrf

10

11 02457900

12 02508900 Roller (81) 1
13 06405800 Wshr-FI-StI

14
15 00308500 Bearing Flange 1

16
17 02414100 Bearing Flange
18 06509400 Nut-Lk Dual Face 10-24 PI 4
19 06505400
20 06501800 Nut-Hex .375-16 2

21 06301400 Wshr-Lock .375 X.130
22
23 02436600

24
25

PART
NO.

07401500 Scr-Tap 6
02407700
02457800

05417700
05503900
06403300

06417000
07001100
07005800 Bit-SernkSI .25-20 X.50 PI 8

02433800

01027600 9 Tooth Sprocket

01207800 Chain (81)

06400300 Wshr-FI-StI

05407900

07405200 Scr-Tap

02433900 Clutch Stop (81) 1
05504000

52405200 Sprocket Assembly

DESCRIPTION QTY ITEM

.250-20X.37Hwh PITr
Shaft Support
Bearing Support (81) 2
Bearing Retainer

(80,82,83,84,85,86)

Brg-BalH.45x2.19x .63 2

(80,82,83,84,85,86)

Bshg-fig .750x1.000 2

X.625x1.250 (81)

Wshr-Fi-StI 2

.755 x1.375 X.125 (81)
Wshr-Fl-StI 1.466x1.718

X .134 (80, 82, 83, 84, 85, 86)

Scr-SItr-Sernk 8

.25-20 X.62 PI (81)

(80, 82, 83, 84, 85. 86)

- (80. 82, 83, 84, 85, 86)
Hex Shaft (81)

.125X.625X .250 SAE S

Roller Chain #41 22 Pitches 1

(80. 82. 83, 84, 85, 86)

.505 X 1.000 X.062 (81)
.531 X 1.062 X .095 PI

Brg-Ball .500 x 1.375 x .437 1

Nut-Lk-Ctr .50-20 PI 1

(80, 82, 83, 84, 85, 86)
(80, 82, 83, 84, 85, 86)
.25-20 X .50 Hx SI Hd PI

Shaft Support

(80, 82. 83, 84, 85, 86)

Bshg-Slv .500 X .625 x .500 2

Br (80, 82, 83, 84, 85, 86)
(80, 82, 83, 84, 85, 86)

PART

NO.

26 07012600
27

3

28 06409300 Wshr-FI-StI .382 x .812 x .062 2

2

29 06403900

•30
31 02458000 Roller'Charin #41 38 Pitches 1

32 ■01313600

33 05602900

34 02437100 RH Axle (83,84, 85. 86)

2

35 05800900

36 05502600

37 52403200

1

38

1

39 06302500 Wshr-Lock .250 x .047

1

40 52405400 LH Axle Assembly

1

41 05502900 Bshg-Slv .562 x .625 x .625 Br
42 05940900

1

42a

1

43 05803000

2

44 02461300
45 06601200 Key-Wdrf .25 x .75 x 5 SAE19
46 06403300 Wshr-FI-StI

1

47

48 05240530
49 01037400 Pin (80, 82, 83, 84, 85, 86)

50

2

51 01037200 Lockout Hub

2

52 01037500 Knob (80, 82, 83, 84, 85)

1

53 05803200

1

NO.

02447500 Reduction Shaft 1

02436700 PinionShaft

02440900 Rh Axle (80,82)

50200200 Sprocket Senrice Assembly (81) 1
05505700 Bshg-Slv 1

52405500 LH Axle Assembly (80, 82)

06525700 Nut-Jam-Nyl .250-20 W/lnsrt

05800300 Pin Roll .188x1.25(81)

08300700 Sg-Comp .028 x .34 x 1.062 1

54 52405900

DESCRIPTION QTY

Ftg-Lube .25-28 x .256 2

(80,82, 83,84, 85.86)

(80, 82; 83, 84, 85,86)

Wshr.FI-«tl

.630x 1XK)5X ..062RI

(80,82,83.84,85,86)
Hi^rualic Drive Fitting
Pin Roil .156x1.60

,Pin-Roil .125 X 1.00 1

Bshg-FIg 2

.625 X .750 X .500 X .875 Br

Pinion & Sprocket Assembly 1

(80, 82, 83, 84, 85, 86)

.750 X.814x1.000 Br

(83, 84, 85, 86)

Scr-Cap .25-20 x 2.0 Gr 8

Hh PI (80, 82, 83, 84, 85, 86)

Pin-Roll .188 X 1.50 1

(80, 82, 83, 84, 85, 86)

Axle Shaft (81) 1

.755 X 1.375 X.125 (81)

Differential Assembly 1

(80, 82, 83, 84, 85, 86)

Wid 75 (80, 82, 83, 84, 85,86)

(80,82,83,84,85)

Pin-Roll .093 X 1.00 1

(80, 82, 83, 84, 85)

Lockout Hub Assembly 1

(80, 82, 83, 84, 85)

5

1

1

2

1
1

1
1

1
1
1

1

1

1
2

1

1
1

11

Friction Wheel Drive

Models 924080,81,82.83,84,65,88

.21

25

1

1^3

26

'27

^21

' . . ■

12

Friction Wheei Drive

Modftls 924080,81,82,83,84,85,86,

ITEM
NO.

2 02445500 Spindle Hub
3 00300300 friction Dise
4 02446400
5 05702100 Rg-Rtng-int1.750x.062 1
6

8

10 05409300 Brg-Ball .75 X .880 x .50
11 52404600 Friction Wheel Assembly
12 02407700
13 07401500 Scr-Tap

PART
NO.

1

7

9 06508600

07401400

06407100

05502600 Bshg-FIg 2

05512600 Bshg-Slv .882 x 1.250 x .531

DESCRIPTION QTY

Sor-Tap 8 14 02408100 Carrier Shaft

312-18 X.50 Hwh PI PI 15 05802900

Disc Hub

Wshr-FI-Stl •

.880 X 1.250 X.062 20 02458200

.625 X .750 X .500 X .875 Br

Nut-Lk Nyl .875-14 1 24 06412300 Wshr-FI-StI

Shaft Support

.250-20 X.37 Hwh PITr

ITEM
NO.

1
1
1

1

1 23 .00303400

1 .344 X.688 X.065 PI
1 25 06300300 Wshr-Lock .312 ID Heavy PI
1

2 27 02458100 Spindle Housing

PART
NO.

16
17
18 b?!4O76O0 Spindle 1
19 06600600 Key-Wdrf 1

21.
22

26

28 02444500 Carrier

01054600

02407100 Drive Oise Spacer 1

05403900 Brg-Bertl .625x1.375 X.44 2
02415500 Bearir^ Spacer 1

05900300

DESCRIPTION QTY

Pin-Roil .156x1.00 2
Drive Plate 1

,125x.50x.2e3SAE3

Housing Moimt

Roller 1

Bit-Hex .31-18 X 1.00 PIQr 2

1

1

1

1
1
1
1

13

Auger/Impelier

Models 924080,81,82,83,84,85,86

14

Auger and Impeller

Models 924080, 81, 82, 83,84,85, 86

ITEM
NO.

1 07516700 Hole Plug 1
2
3 07508300 Knob 1
4
5 06702400 Pin-Cotr.12x.75 PI 1

6

7

8 02902400 Spring Washer 1

9

10
11
12
13 01049400

14
15 06917000 Cable Tie (83, 84, 85, 86, ) 1
16 02434600 Rod 1
17

18 02450000 Worm Gear LH 1
19 06416800 Wshr-Plastic 3

20 06203400 BIt-RdHdSqNk 1
21 02212300

22 06303500
23 06302300 Wshr-Lock .313 X .062 1
24
25 52403600 Blower Housing w/Decals (81 )1

26 02459900 Runner (81,82) 2

27 06503900 Nut-Lk .375-16 Gr A PI 6
28 06400200 Wshr-FI-StI

29 01016400

30
31
32 52401300 32 In RH Rake Service 1

PART
NO.

05711300
02464400 Chute Crank 1
06700400 Pin-Cotr.12x .75 PI 3

06404300

05240500
02464100 Chute Crank Rod 1
06701000 Pin-Hair Int.08 X.38 X 1.42 1
05803400

02451400 Worm Shaft (83, 84, 85, 86) 1
02443400 Chute Crank Bracket 1

01026000 Wave Washer (81,82) 1
01320200

06501500 Nut-Hex .312-18 3
52403700

52403800 Blower Housing w/Decals (84)1
52404300 36 Inch Blower Housing 1

52406500

03075500 Runner-Skid Shoe 2

02437300 Scraper Blade (84) 1
02459200 Scraper Blade (83,86)
03519200
06504200 Nut-Lk .312-18 Gr A PI 13
02209300 Spin Drive Zerk Fitting

52401400 32 In LH Rake Sen/ice 1
52403900 RH Rake w/Zerks (81,82) 1

52404000 LH Rake w/Zerks (81, 82) 1
52406300 RH Rake w/Zerks (83, 86) 1

DESCRIPTION QTY

Rg-rtng-Ext .875 x.010

Wshr-FI-StI 4

.406X.812X.0650 PI

Universal Joint Assembly 3

Pin-Roll .125 X.75

Worm Shaft (81,82) 1

Wave Washer (83, 84, 85, 86)

.390 X .875 X .062

.31-18x.75Sht PI
Worm Clevis 1
Wshr-Lock Ext .375 x .035 PI

Blower Housing w/Decals (82)

w/Decal (85)
28 Inch Blower Hsg 1

w/Decal (83, 86)

(83, 84, 85)

21

.38 X .875 X .083 PI

Scraper Blade (82) 1

Scraper Blade (85) 1

AssembI (84)

AssembI (84)

1

1

ITEM
NO.

33
34

35
36

37 05418200 Brg-Ball1.0x2.0x.56
38 07005800 BIt-SernkSI.25-20X.50 PI

3

39 06203300 BIt-RdHdSqNk 5
40 06404600 Wshr-FI-StI
41 06505600 Nut-Lk-FIg .250-20 PI 6

42 02437400 Bearing Support
43 05503500

44 06404700 Wshr-FI-StI
45

46 05902400 Bit-Hex .50-13x1.00 PI Gr2 2
47 08316400 Sq-Tens 1

1

48 06504000 Nut-Lk-Ctr .250-20 PI 4
49
50 02448100

51

1

52
53 52404800
54 02217800
55
56 070031.00
57 07002600 Nut-Retnr .38-16 Tinrman 2
58 01014200 Bearing Flange (81,82) 1
59 02459000
60 07406900Scr-tap 10-24 X .484 Hwh Tr 8
61

62 06919700 Control Cable (83,84, 85, 86) 1
63 06700100

1

64 06917500 Pivot (83, 84, 85, 86) 1
65 02401200

66 02401400

4

67

68

69 05902300
70 52406100 Chute Deflector w/Decal 1

71

PART
NO.

52406400 LH Rake w/Zerks (83,86)
53503400
53503500
51001500
00301700

03086200
06201000
06201300

06300600 Wshr-Lock .500 X1.51 Hvy PI

02440500

06703900

05908000

06806700

02449900 Discharge Chute- 1
02454800 Discharge Chute (81,82) 1

06700300 Pin-Cotr .06 X .50 1

06410400 Wshr-FI-StI .520 X .810 X .033

53114400
02401700

DESCRIPTION QTY

RH Rake w/Zerks (85)
LH Rake w/Zerks (85) 1

Shear Bolt Service Assembly

Bearing Flange (81,82) 1
Bearing Flange

(83, 84, 85, 86)

Btt-RdHdSqNk 5

.38-16x.75Sht PI

BIt-RdHdSqNk .38-16 x 1.00 2

(83, 84, 85, 86)

.312-18x.62Sht PI

1.010X1.505X.062PI

Bshg-FIg 2

1.000x1.12x.62x1.50 Br

.511 X 1.441 X.125 PI

.062 X .56 X 8.0 WId II

Arm Extension (82) 1
Clevis Pin

Pin-Cotr .062 X .75 PI 1
Bit-Hex.25-20X.63 PIGr2
Brake Arm Assembly
Brake Lining

Rvt-Tblr.187x .437 Rh St PI 2

BIt-Scrhfwh .38-16 x .75 PI 2

Chute Clamp 4

36 In (83, 84, 85, 86)

Pin-Cotr .09 X .75 PI 1 ­Clevis (83, 84, 85, 86)

Clevis Pin (83, 84, 85, 86)

Btt-Hex.38-16x.75 PIGr2 2

(81,82)
Deflector w/Decal (83, 84, 85) 1
Trim 1

1
1

2

1

1

6

2

2

2
2

1
1

1
1

1
1

1

15

Gear Ca^ Gast Iron

Modals 924060,81,62,83.84,86,86

16

h30

Gear Case Cast Iron

Models 924080,81,82,83,84,85,86

ITEM
NO.

1 05801500 Pin-Roll .313x1.75 2
2
3 06600100 Key-WDRF .188 x .875 x .38 1 03519500
4
5

6 02401500
7 05606100 Sear 1.000 X 1.312 X.150 1
8 05404400 Brg-Cup1.781 X.475 2

9
10
11

12
13
14
15
16 05902200 Bit-Hex .31-18 X .75 PI Gr2
17
18

PART
NO.

02437600

02437500 Worm Shaft 1
06601300

05404500
00200500
52400900

05707500

05607000

00113800
00403700 Dust Cap 1

06300300 Wshr-Lock .312 ID Heavy PI
06408200 Wshr-FI-StI .328 X 1.0 X .094 1

DESCRIPTION QTY ITEM

Fan

Key-Sq

.188x1.Ox.188 Sae8630 21

Adjustment Plug

Brg-Cone .750 x .61 2
Bearing Spacer
Worm & Gear

Service Assembly 27 06408700
Rg-Rtng-Int 1.781 x .062
Seal 1.625 X 2.125 X.250 2 28 02406400
Pipe Plug

NO.

19

1 02459600

20

1

1

22
23
24
25

2 26

1

1

1

29

30 52403500
1
1

31

PART
NO.

02406500

06600800

05803000
05900100
06301700
02401300 Gear Case Cover
00200800 Gasket
05505900 Bshg-FIg 1.615x1.87

02400200

00008000

DESCRIPTION QTY

Rake Shaft (84) 1
Rake Shaft (83)
Rake Shaft (85) 1

Key-WDRF 1

.25 X .875 X .375 Sae A
Pin-Roll .188 X 1.50 2
Bit-Hex .25-20 x .75 PI Gr 2 4

Wshr-Lock Ext .250 ID 4

X 1.68x2.250

Wshr-FI-StI

1.625 X 2.500 X .012
Gear Case Shaft
Gear Case
32 In Blower

Gear Case AssembI

Ariens L-2 16 Oz Lube 5

1

1
1
2

2

1
1
1

17

Gear Case Aluminum

Models 924080,81.82

I

4

i

18

Gear Case Aluminum

Models 924080, 81,82,

ITEM
NO.

1 05803700
2 02423700
3

4

5 03210300 Thrust collar 1
6 05804500
7 06600100 Key-WDRF .188 x .875 x .38 1 18 07402700
8 00007200 (A) 8 Oz Tube of Liquid Grease 4

9 07401600

10

11

12

PART
NO.

05604700 (A) 0-Ring .250 x .953 x .103 1
05613100 (B) Seal-Up .750 x 1.00 x .156 1
05511200

00008000 (C) Ariens L-2 16 Oz Lube 3 oz.

06200100 BIt-RdHdSqNk

05606100
02437900 (A) Gear Case Half LH 1
02465400 (B) LH Gear Case Half 1 24 06205400

DESCRIPTION QTY

Pin-Roll .250 X 1.75 2 13
Fan

Bshg-FIg .750 x 1.000

X .750 X 1.250 16

Pin-Grv .188x1.25 TpA

Scr-Tap .375-16 x .50

Hwh PI Tr

.25-20x1.25 Gr5 PI

Seal 1.000 X 1.312 X .150 2 .500 x.750 X.750x1.000

ITEM
NO.

1

14 52402600

15 03203800 (A) Gasket 1

1

1

17 06505600 Nut-Lk-FIg .250-20 PI

19

1

20
21 06416600

2

22

23 02438300

25

PART
NO.

05512200

03212900 (B) Gasket
02438000 (A) Gear Case Half RH 1
02465500 (B) R.H. Gear Case Half 1

05803000 Pin-Roll .188x1.50
05806900

05511100

52407300

DESCRIPTION QTY

Bshg-FIg

1.000x1.12x.62x1.50Br

Worm Shaft & Gear Assy 1

Scr-Tap 2

10-24x.75HwhPITr

Pin-Gtv .313x 1.44 TpC 1
Wshr-FI-StI

1.007x1.542x.062

Bshg-FIg

Rake Shaft
BIt-RdHdSqNk .25-20 x .88 PI 2
24” Gear Case Assy.

2

1

4

2

2

1

1

1

(A) Model 924082 S/N <000652
(B) Model 924081 S/N 000101 >

Model 924082 S/N 000653>

(C) Model 924082 S/N 003750>

19

Service Parts 12V and Without Engine

These models are identical to other models except for parts listed below as noted.

Models 924087,088,089,090

Model to Service
924089 ST824

924088 ST1028
924087 ST1232 (Except Belts

See (924085)

924090 ST0036

1 02403200

02403100 ST Battery Tray 28 (87,88,90) 1
2 05900100
3
4 03055700 Battery 1

5 02403000
6
7
8 06218700 BIt-Rdhdsqnk .25-20 x 7.00

9 06501200 Nut-Wing .250-20 PI 2
10 06422000
11 52707300
12 08233200

06505600 Nut-Lk-FIg .250-20 PI

03^1000 Solenoid

09032300

08233300 10 HP Enghje (924088) Tecumseh HMSK100-159259S
08233400

ST Battery Tray 24 (89) 1

Bit-Hex .25-20 X.75 PI Gr 2 4

ST 12V Harness

Cvr, Battery

Wshr-FI-StI .260 X .500 x .060 PI

Switch Assembly 1
8 HP Engine (924089) Tecumsete;HMSK80-155494R 1

12 HP Engine (924087) Tecumseh OHSK120-222018C

Engine (924090) As Vendor Installed

Use Model Parts
924082 ST824

924086 ST1028
924084 ЭТ1032

924085 ST1236

4

1
1
1

2

2

1
1
1

20

Brush

Model 824004

I

22

Brush

Model 824004

ITEM
NO.

y

1
2
3

4
5 06201100 Blt-RdHdSqNk.31-18x.75 12

6
7 06300600 Wshr-Lock .500 x 1.51 Hvy PI 2
8 01062900
9 01060400

10 01060100
11
12 06400200 Wshr-FI-StI 14

13
14
15 01060200 Idler Arm 1
16
17
18

19
20 02441700
21
22 51002800

Í

23
24
25
26 05905700 Bit-Hex .31-18x2.00 PI Gr2 1
27

28 06404400 Wshr-FI-Stl .38 X .875 x .179 PI 2
29 02441800 Latch Bar 1
30 06504200 Nut-Lk .312-18 Gr A PI 6

31

32 02429300

33

34
35 01061300

36

37

38

39

40

41

42 02447700 Castor Leg 2

43

44 05409700

PART
NO.

06501500 Nut-Hex .312-18 21
06300300
06001100 Scr-Set .25-20 x .38 4

05409600

05902400

05900300 Bit-Hex .31-18x1.00 PI Gr2

06300400 Wshr-Lock .375 x .115 Hvy PI 3
055O66OO Bshg-Slv .375 X.437 X.312

06503900
01060800

. 05904900

05920800 Bit-Hex .38-16 X 3.50 PI Gr 5 2
08300300
05902200

06408200
00607100

06407900

01060300 Hood Strap
05906800

01060000

06400800 Wshr-FI StI .438x 1.Ox.083
08308800 Sg -Ext 1
06505200
05900400
06508800 Nut-Speed U-Tv .312-18 1
01061200 Chain Shield 1

07109400

DESCRIPTION QTY

Wshr-Lock .312 ID Heavy PI 21

SkHc UpNI Oh

Brg-FIg

Gr5PI

Bit-Hex .50-13x1.00 PI Gr2 4
Retainer Plate

Core 1
Hood 1

.38 X .875 X .083 PI

Nut-Lk .375-16 Gr A PI 2
Chain 1
Bit-Hex .28-16x3.00 PI Gr2 1

Top Mount 1
Sg-Tors .109 X .88x2.25 1

Poly Brush Assembly 1
Bit-Hex .31-18 X.75 PI Gr2 10

Wshr-FI-StI .328 X 1.0 X .094 2

Spacing Bushing 2
Wshr-FI-Stl

.344 X 1.125 X.063 PI

Shaft Guard 1
Bit-Hex .38-16x2.00 PI Gr2 1
Brush Frame 1
Chain Tightener

Nut-Sq .50-13 1
Bit-Hex .38-16x1.00 PI

Wh11.5 In 2
Brg-Ball

.884 Hex X 52mm x 1.07

ITEM
NO.

45

46 06505900
47 06512400

2

48 06512200 Nut-Lk Top .375-16 Gr CPI
49
50
51 02535300 Clamp
52 07002700

2

53 02428700
54

55

7

56 01207800 Chain 1
57
58 02206500 Bracket 1
59 06202200 BIt-RdHdSqNk 1

1

60 07501500 Shift Ball 1
61 07003100
62 02429800 Sprocket
63 06600300
64 02400400
65 05900500
66
67 02429600 Bearing Flange 8

69 01062000 Sprocket
70 05805600 Pin-Roll .188x1.75

2

1

1

4

1

3

PART
NO.

06418500

02429200 Bottom Mount 1

08300300 Sg-Tors .109 X .88 x 2.25 1

02441900 Adaptor frame 1
05902300

00105700

02429400 Mounting Plate 1

68 02447600 Spacer

71
72 01060900 Sprocket
73 05803000
74 02429900 Drive Shaft
75 02430600
76 07005300 BIt-SerrdhdSI .31-18x.75 PI 3
77 50202100 Hub Assembly
78 06001200 Scr-Set .32-18 X .38 2

79 07002600 Nut-Retnr .38-16 Tinrman 2
80 07307000 Ply-V 9.0x1.25 3 Bit
81 06507800

82 07210800 V-Belt
83 06501800 Nut-Hex .375-16 2

84 02429500 Stiffener Plate
85 02423600
86 05902800 Bit-Hex .25-20 X .50 PI Gr2 2
87 06504000

02429100

07213000 V-Belt(71)

DESCRIPTION QTY

Wshr-FI-Stl

1.015 X 1.500 X .125
Nut-Lk-FIg .375-16 Gr A PI 5
Nut-Lk-Top .312-180GrCPI

BIt-Serhfwh .31-18x.75 PI 2

Release Rod
Bit-Hex .38-16 X.75 PI Gr2 4
Position Rod 1

.31-18X.38 Sht PI
BIt-Scrhfwh .38-16 X.75 PI
Key-Wdrf .188 X .75 Sae #9 2

Gear Box Assembly 1
Bit-Hex .38-16x1.25 PI Gr2 2

Shaft 1
Pin-Roll .188x1.50 1
Universal Joint

Skhcupni Ch

Nut-Fig. .312-18X.38

Skhcupni Ch

Belt Retainer 1
Nut-Lk-Ctr .250-20 PI 2

2

2
2

2

1

2

1

1
1
1

1
1

1
1

1
3

1

1

1

23

....

Alternator/Headlight

Models 924080,81,82,83,84,85,86,87,88,89,90

ITEM
NO.

1

2 02455500 *

3
4 02459800 *

5 02455800 *

6 07408400 ®
7 06303200 @

PART
NO.

02455400 *

02457600 *

02455600 *

02455700 * Lighting Connector

DESCRIPTION QTY

Alternator Shaft 3.O0
(Tec. 590613)
Alternator Shaft-3.50
(Tec.59G636)
Centering Tube

(Tec. 590610)

Centering Tube

(Tec. 590609)

(Tec. 61178)

Spacer-Alternator

(85,86, 87,88,89, 90)

Alternator (Tec. 611077)

Scr-Tap 8-18 X 1.25 Crfh PI В
Wshr-LocI Ext .313 X .030 PI

(85, 86, 87, 88, 89, 90)

ITEM
NO.

1 8 06201500 @

1 9

1

10
11 02463600 @

1 12

1 13 02465000 @

14 06507800 @

1

15

1
3 16
2

PART
NO.

05913100 @

06901200 @

02464900 @

06300300 @

06501500 @ Nut-Hex .312-18

DESCRIPTION QTY

BIt-RdHdSqNk 312-18 x 1.00

PI (85, 86, 87, Й8, 89, 90)

Bit-Hex .31-18x2.50 PI 1

Gr2 (85, 86, 87, 88, 89, 90)
Clamp (85, 86, 87, 88, 89, 90) 2
Headlight (85,86,87,88,90)
Lense-Flood 1

(85, 86, 87, 88, 90)
Bulb (85, 86. 87, 88, 89, 90)
Nut-Fig .312-18 PI 1

(85, 86, 87, 88, 89, 90)
Wshr-Lock .312 ID Heavy PI

(85, 86, 87, 88, 89, 90)

(85, 86, 87, 88, 89, 90)

I

1

1

1

1

1

* Parts Warrantied by Tecumseh Products

@ Headlight Standard On 924084,85,86,87,88,89,90

24

120 Volt Electric Starter

Model 72409S Stollo ^rtér FKs AH Models

ì

. Order Parts From Authorized

I Tecumseh Dealer Under Starter

Number.

Model 724036 - Tec. No 33029B

25

Carburator Cover &
Choke Assembly
Removed

Choke

Decal

Tecumseh Air Cleaner

Model 24005 Fits AU Modol^

Throtlle Control

Carburetor Cover Bracket

Choke Rod &

Hairpin Installed

ITEM

NO.

1

2

PART DESCRIPTION QTY ITEM
NO. NO. NO.

06701900
02447100 Choke Rod

Pin-Hair Int .06x .18x .77

1 3
1

26

PART DESCRIPTION

02400500 Air Cleaner Kit 1

QTY

Slicer Bar

ModU 710997 Fits AU Moctot«

тм PART
N0.

1
2 06200900

NO.

01024200 OueerBar

OiSCRIPTtON QTY

Ш-RtftWSqNk .31-18 x .50

ITEM

NO.

3 06504200

1

2

PART
NO.

INSCRIPTION QTY

Nut-Uk .312-18 Gr AR 2

27