Before you operate your unit, carefully and completely
read manuals supplied with the unit. The contents will
provide you with an understanding of safety instructions
and controls during normal operation and maintenance.
For your safety and the safety of others always read,
understand, and follow all DANGER, WARNING, and
CAUTION messages found in manuals and on safety
decals.
When ordering replacement parts or making service
inquiries, know the Model and Serial numbers of your
unit and engine.
Numbers are located on the product registration card in
the unit literature package. They are printed on a serial
number label, located on the frame of your unit.
• Record Unit Model and Serial numbers here:
The Ariens dealer must register the product at the time of
purchase. Registering the product will help the company
process warranty claims or contact you with the latest
service information. All claims meeting requirements
during the limited warranty period will be honored,
whether or not the product registration card is returned.
Keep a proof of purchase if you do not register your unit.
Customer Note: If Dealer does not register your product,
please fill out, sign and return the product registration
card to Ariens or go to www.ariens.com.
YOUR SATISFACTION IS IMPORTANT
Questions? Please follow these helpful steps:
1. Refer to the manuals supplied with your unit.
They will guide you through safe and proper
operation and maintenance.
They contain specifications on your unit.
If your questions are not answered in these manuals,
go to step number two.
2. Contact Your Dealer.
Our dealers will be happy to supply any service or
advice required to keep your unit operating at peak
efficiency.
A factory trained staff is available to support your
equipment needs. They stock genuine Ariens parts
and lubrican ts m anufa ctured with the sam e preci sion
and skill as the original.
If your questions are not resolved by the support
staff, ask for the manager or owner.
When contacting your Dealer supply your model and
serial numbers.
• Record Engine Model and Serial numbers here:
UNAUTHORIZED REPLACEMENT PARTS
Use only Ariens replacement parts. The replacement of
any part on this vehicle with anything other than an
Ariens authorized replacement part may adversely affect
the performance, durability, or safety of this unit and may
void the warranty. Ariens disclaims liability for any claims
or damages, whether warranty, property damage,
personal injury or death arising out of the use of
unauthorized replacement parts.
TO SPEED PARTS ORDERING:
1. Know the model and serial numbers of your unit.
4059470001Bolt, Hex .31-18 x .75 Grade 5
5064357002Washer, Flat Steel .38 x .88 x .083 (046, 047, 048, 311, 312)
064357003Washer, Flat Steel .38 x .88 x .083 (045)
6010358001Spacer Bushing
7032069001Idler Arm
8004572511Belt Finger (046, 311, 312)
032290511Belt Finger (047, 048)
004834511Belt Finger (045)
9063074001Wash er, Locking .312 x .097
10 059473001Bolt, Hex .31-24 x .75 Grade 5
11004473001Belt Cover
12 0741 160 02Screw, Tappi ng Hex Washer Head .25-20 x .37
13 059530001Bolt, Hex .25-20 x 1.75 Grade 8
14 065297001Nut, Locking Center .25-20
15 083172001Spring, Tension .05 x .44 x 3.37
16 002893001Shaft, Axle with Pin-Lock
17 055216002Bushing, Flange Hex .75 x .87 x .53 x 1.18
18 055021002Bushing, Flange .50 x .625 x .50 x .75
19 064396002Washer, Flat Steel .52 x .81 x .033
20 083220001Spring, Torsion .15 x 1.00 x 1.53
21 532051001Clutch Arm with Brake Pad (Includes items 32 & 33)
22 032319511Arm, Clutch
23 062000081Bolt-Round Head Square Short Neck .31-18 x 1.25 Grade 5
24 064357003Washer, Flat Steel .38 x .88 x .083
25 058026001Pin, Roll .16 x .88
26 012131001Bearing Spacer
27 024574001Idler (046, 047, 048, 311, 312)
50 064000071Washer, Wave .69 x .84 x .011
51 064000091Washer, Thrust .625 x 1.00 x .03
52 065000112Nut, Locking Center Jam .31-18
53 063074001Washer, Lock .312 x .097 Heavy (047, 048)
54 059473001Bolt, Hex .31-24 x .75 Grade 5 (047, 048)
55 060055002Screw, Set .31-18 x .38 Socket Head (045)
56 066015001Key, Woodruff .125 x .625 x .250 SAE 5 (045)
57 024574001Idler
8
Page 9
NOTES
9
Page 10
Model 932045, 046, 047, 048, 311, 312
FRICTION DRIVE
11
15
2
7
6
3
27
11
26
13
5
4
9
11
29
14
11
30
17
16
18
8
19
39
12
8
1
10
28
33
31
32
35
34
37
36
21
20
38
22
23
24
Item Part No.Qty. Description
1055110001Bushing, Flange .50 x .75 x .63 x .94
2058026001Pin, Roll .16 x .88
3003979001Weldment, Speed Control Arm
4532115001Flange and Bushing (Includes Item 1)
5055021001Bushing, Flange .500 x .625 x .500 x .750
6032317001Fork, Speed
7055145001Bushing, Flange .33 x .44 x .44 x .56
8065306008Nut, Locking Dual Face 10-24
9062142004Bolt, Round Head Square Neck 10-24 x .38 Grade 2
10 032421001Spacer, .325 x .625 x .455
11064392004Washer, Flat Steel .51 x 1.00 x .062
12 032353001Shift Carrier
25
PS0342
10
Page 11
FRICTION DRIVE
Item Part No.Qty. Description
13 032483001Friction Disc
14 004280001Hex Shaft
15 058047003Pin, Roll .125 x .88
16 022011001Pinion
17 003085001Bearing, Flange
18 054352001Bearing, Ball .437 x 1.375 x .437
19 032269001Bearing, Flange
20 032011001Friction Plate
21 032259001Bearing Assembly
22 004286001Shaft, Spindle - Compact Snow
23 064000091Wash er, Thrust .625 x 1.0 x .03
24 055120001Bushing, Flange .63 x .88 x 1.75 x 1.19
25 055121001Bushing, Flange .88 x 1.25 x .75 x 1.50
26 059479003Bolt, Hex .25-20 x .50 Grade 5
27 065297003Nut, Locking Center .25-20
28 067019003Pin, Hair Internal .06 x .18 x .77
29 032480001Bracket, Traction Arm
30 067147003Pin, Clevis .243/.248 x 1.38
31 067135001Pin, Hair Internal .08 x .18 x 1.18
32 532055001Assembly, Traction Clu tch
33 032211001Clutch Fork
34 032315001Spacer .50 x .75 x .32
35 012086001Cap .50 Rod
36 083141001Spring, Tension .06 x .44 x 1.56
37 067071001Pin, Cotter .12 x 1.0
38 057043001Ring, Retaining External 1.25 x .05
39 064419001Washer, Flat Steel .53 x 1.06 x .095
Model 932045, 046, 047, 048, 311, 312
11
Page 12
HANDLEBARSAND CONTROLS
Model 932045, 046, 047, 048, 311, 312
44
37
35
36
23
51
32
28
31
30
51
23
33
31
29
41
29
41
25
34
18
52
33
29
39
40
38
42
55
31
20
29
30
42
3
54
43
31
1
2
7
48
4
5
6
53
49
52
26
45
50
47
46
7
27
19
10
21
22
12
16
10
24
14
11
17
12
15
12
13
8
9
PS0352
Page 13
HANDLEBARSAND CONTROLS
Model 932045, 046, 047, 048, 311, 312
Item Part No.Qty. Description
1075335001Knob, Ball-Black 1.47, .375-16
2032479001Weldment, Shift Lever
3059633001Bolt, Hex .38-16 x 2.00 Grade 5
4083357001Spring, Compression .13 x .78 x 1.25
5064359001Washer, Flat Steel .44 x 1.00 x .083
6065296001Nut, Locking Center .38-16
7067135002Pin, Hair Internal .08 x .18 x 1.18
8003973591Frame, Compact Snow
9001884002Strap, Engine Bolt Weldment
10 074116004Screw, Tapping .25-20 x .37 Hex Washer Head
11032324591Cover Bottom
12 064357001Washer, Flat Steel .38 x .88 x .08 (046, 047, 048, 311, 312)
064357002Washer, Flat Steel .38 x .88 x .08 (045)
13 065298001Nut, Locking Center .31-18
14 065292004Nut, Hex .31-18
15 032363001Belt Finger Lower
16 062208001Bolt-Round Head Square Short Neck .31-18 x .75 Grade 5
17 063074004Washer, Locking .31 x .10 Heavy
18 532143001Control Panel with Decal
19 004269511Handlebar, Lower
20 075317004Knob, Wing .31-18
21 070285004Bolt Serrated Hex Flange Washer Head .38-16 x .75 Grade 5
22 075000054Spacer, Handlebar
23 057176002Ring, Retaining, External .25 x .010
24 068000012Rivet-Pop, .187 x .45 Dome Aluminum
25 004270511Handlebar, Upper RH
26 004271511Handlebar, Upper LH
27 062216004Bolt, Round Head Square Neck .31-18 x 2.25
28 003983511Paddle, Clutch - RH Compact
29 055000404Bushing, .266 x 1.62 x .50
30 083000262Spring, Torsion
31 003993004Bushing, Flange
32 059616001Bolt, Hex .25-20 x 2.50 Grade 5
33 065309002Nut, Jam Nylon .250-20 With Nylon Locking Type Insert
34 003987001Bracket, Cable Mount
35 073000121Pulley, Black Nylon
36 070000211Bolt, Shoulder
37 065297001Nut, Locking Center .25-20
38 069000221Cable, Auger
39 003981511Paddle, Clutch - LH Compact
40 069000231Cable, Traction
41 062000094Bolt, Round Head Square Extra Long Neck .31-18 x 1.50
42 065431006Nut, Locking Top Flange .31-18
43 003984511Bracket, Shift Mount
44 062122002Bolt, Round Head Square Neck .31-18 x .62
45 003867001Pivot, Shift Rod
46 064373001Washer, Flat Steel .281 x .62 x .065
47 004233001Rod, Shift Lower
48 003997001Rod, Shift Upper
49 062199002Bolt, Round Head Square Neck .25-20 x .75
50 065375002Nut, Locking Wing .25-20
51 075187002Handle Grip
52 004467002Bumper Pad
53 059653001Bolt, Hex .25-20 x 3.25
54 005898001Bushing, Sleeve .266 x .750 x .750
55 064373001Washer, Flat, Steel .281 x .62 x.065
13
Page 14
Model 932045, 046, 047, 048, 311, 312
AUGERAND CHUTE
20
19
18
21
18
8
17
12
26
2
3
4
5
6
7
8
9
10
11
12
25
24
1
23
13
22
13
14
15
16
PS0363
14
Page 15
AUGERAND CHUTE
Model 932045, 046, 047, 048, 311, 312
Item Part No.Qty. Description
1065297002Nut, Locking Center .25-20
2532144001Chute, Discharge, Compact Snow
3062208001Bolt, Round Head Square Short Neck .31-18 x .75
4001702001Device, Snow Cleanout
5068136002Rivet-Pop .187 x .45 Stainless Steel Dome FBF64
6001703001Mount, Snow Cleanout
7532145001Weldmemt, 24" Blower Housing (045, 046, 047, 312)
10 064000091Washer, Thrust .625 x 1.0 x .03 (045, 046, 047, 311, 312)
11004435511Bracket, Pinion Gear (045, 046, 047, 311, 312)
12 032243001Push Nut (045, 046, 047, 311, 312)
13 064393001Washer, Flat Steel .38 x 1.50 x .062
14 011238002Friction Washer
15 003967511Weldment, Pedestal Chute Mount
16 003980001Friction Plate
17 083209001Spring, Compression .19 x .56 x 1.62
18 064362001Washer, Flat Steel .41 x .81 x .065
19 065296001Nut, Locking Center .38-16
20 004274511Handle, Chute Rotation (048)
21 003457001Grip, Chute Handle, Orange (048)
22 059585002Bolt, Hex .38-16 x 1.75
23 063088002Wash er, Lock .38 x .094
24 065420002Nut, Locking Top Flange .38-16
25 062202001Bolt, Round Head Square Neck .31-18 x 1.75 (045, 046, 047, 311, 312)
26 003985511Bracket, Crank Support (045, 046, 047, 311, 312)
27 065431001Nut, Locking Top Flange .31-18 (045, 046, 047, 311, 312)
28 055000201Bushing, Polyliner 322-C (045, 046, 047, 311, 312)
29 004234001Rod, Chute Crank (045, 046, 047, 311, 312)
17
Page 18
GEAR CASEAND IMPELLER
Model 932045, 046, 047, 048, 311, 312
24
29
30
1
27
25
26
7
4
5
20
9
10
19
12
22
11
3
21
22
19
28
2
6
Item Part No.Qty. Description
1001870001Pulley, 4L with Hub .75 x 8.50
2000080001Ariens 16 oz. Bottle of L2 Lube
3055312001Bushing, Sleeve .755 x 1.500 x .442
4056000041Seal, Oil .748 x 1.378 x .276
5058049001Pin, Groove .19 x 1.25 Type E
6058037002Pin, Roll .25 x 1.75
7004266511Weldment, Impeller 12" 3 Blade
8064425001Washer, Fiber .44 x .66 x .032
9055112001Bushing, Flange .75 x 1.00 x .75 x 1.25
10 002721001Thrust Collar .75 I.D.
11532125001Shaft & Worm Gear Assembly
12 00291100 1Gear Case Casting, Machined Left Hand
13 066093001Key, Woodruff .19 x .63 Hardened #61
14 064390002Washer, Flat Steel .81 x 1.50 x .14
15 074170001Screw, Tapping .38-16 x .75 Rolok
16 002630001Shaft, Rake 24" (045, 046, 047, 311, 312)
002605001Shaft, Rake 20" (048, 311)
17 055206001Bushing, Flange .50 x 1.00 x .75
18 074124006Screw, T apping Hex Washer Head .25-20 x 1.00
19 064415002Washer, Flat Steel .755 x 1.375 x .062
20 000317001Loctite Gasket 518
21 002912001Gear Case Casting, Machined Right Hand
22 055311002Bushing, Flange .75 x 1.13 x .50 x 1.50
23 532127001Gear Case Assembly- 24" (contains 3-5,8-13,15-22,28) (045, 046, 047, 311, 312)
532126001Gear Case Assembly- 20" (contains 3-5,8-13,15-22,28) (048, 311)
24 065297003Nut, Locking Center .25-20
25 010142001Bearing Flange
26 054063001Bearing, Ball .75 x 1.75 x .50
27 004287001Bearing, Flange
28 056189002Seal, Oil .75x 1.375x .250
29 059473001Bolt, Hex .31-24 x .75 Grade 5
30 063074001Wash er, Locking .312 x .097 Heavy
18
14
13
11
23
28
14
8
15
17
16
PS0381
18
Page 19
Ariens Company
655 West Ryan Street
P.O. Box 157
Brillion, WI 54110-0157
920-756-2141
Fax 920-756-2407
www.ariens.com
Loading...
+ hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.