PAULO CORNER RECLINER UNIT
Simple Assembly Instructions-please keep for future reference
A .1X Left Seat Cushion
B .1X Middle Seat Cushion
Velcro
C .1X Right Seat Cushion
F .1X Right Back RestD .1X Left Back Rest E .2X Middle Back Rest
IMPORTANT
1.Read these instructions carefully and
familiarise yourself with the procedure
before assembling the unit.
2.Check that you have all the component
parts following the list on the back cover
and familiarise yourself with each part
before proceeding.
3.Take all the fitting out of the plastic bag
and separate them into their groups.
4.Ensure you have enough space to lay
out all the parts before assembly.
5.To avoid scratching it is recommended
that you assemble the unit on a soft level
surface.
NOTE: It would be useful to
ask someone to help you at
this stage.
D E
NOTE: It would be useful
to ask someone to help
you at this stage.
1.Carefully combine the Left
Seat A together with Back
cushion D and E.
See fig.1.
2.Engage the Metal Locks
push them together until you
hear them lock into position.
See fig.2.
3.Same with above step
1,carefully combine the right
seat cushion together with E
and F.
4.Attach the center unit on right unit,
Then engage the metal locks.
See fig.4.
A
Metal Lock
FE
fig.1
fig.2
fig.4
5.Attach the left unit on center unit
Then engage the metal locks.
See fig.5.
See fig.3.
NOTE: Carefully line up the
two side Metal Locks.
fig.3
C
Ensure they align
correctly.
fig.5
NOTE: It would be useful
to ask someone to help
you at this stage.
Back and Foot Rest
Adjustment
This Chair features a
reclining back rest and
raised foot rest. You need to
be sitting in the chair to
activate the features.
1.Pull the "Adjustment
Lever" then gently lean
back,the chair will recline
and the foot rest will
automatically lift up.
See fig.6.
2.Lean forward with the foot
pressure,Move your body
weight forward and press
down with your legs until the
footrest returns to the closed
position. At this position it
will be locked closed.
See fig.6.
3.Adjust the recliner to your
own requirements.
.
7.Finally carefully place the unit in the
desired location.
See fig.7.
fig. 7
CAUTION:
Beware of entrapment. Keep
hands and fingers clear of the
Tilt Mechanism when operating
the controls.
Ensure that children or pets are
not playing or lying in the way
when the Tilt Mechanism is
operated.
Prevent children from playing
on the furniture or with the
controls.
Care and Maintenance
Safety
To avoid any risk of suffocation to animals or children dispose of the plastic
bags immediately.
fig. 6
Cleaning
As with all surfaces clean with a damp cloth and mild detergent, do not use
bleach or abrasive products.
Fitting
From time to time please ensure there are no loose screws on the product.
Loading...