Argos Kids Sywell - 1 Drawer Bedside ASSEMBLY INSTRUCTIONS

MADE IN
BRITAIN
Dimensions
Width - 99.5cm
Depth - 99cm
Height - 99cm
Kids Sywell - 1 Drawer Bedside
If you need help or have damaged or missing parts, call the Customer Helpline: 03456 400800
Issue 2 - 06/02/15
Important - Please read these instructions fully before starting assembly
248/6282
276/2690
275/1096
Safety and Care Advice
Important - Please read these instructions fully before starting assembly
Warning: This unit weighs approximately 9.5kgs. Please lift with care.
• Check you have all the components and tools listed on pages 2 and 3.
• Remove all fittings from the plastic bags and separate them into their groups.
• Keep children and animals away from the work area, small parts could choke if swallowed.
• Parts of the assembly will be easier with 2 people.
• Make sure you have enough space to layout the parts before starting.
• Do not stand or put weight on the product, this could cause damage.
• Assemble the item as close to its final position (in the same room) as possible.
• Assemble on a soft level surface to avoid damaging the unit or your floor (use opened out unit carton).
• We do not recommend the use of power drill/drivers for
inserting screws, as this could damage the unit. Only use hand screwdrivers.
Safety note: If there is any chance of this unit being pulled over by children etc. it is recommended that the unit is secured to a wall using suitable fixings (not supplied).
• Dispose of all packaging carefully and responsibly.
1
Care and maintenance
• Only clean using a damp cloth and mild detergent, do no use bleach or abrasive cleaners.
• From time to time check that there are no loose screws on this unit.
• This product should not be discarded with household waste. Take to your local authority waste disposal centre.
Note: If required the next page can be cut out and used as reference throughout the assembly. Keep this page with these instructions for future reference.
Components - Panels
Please check you have all the panels listed below
2
If you have damaged or missing components, call the
Customer Helpline: 03456 400800 quoting the reference
numbers below
1
2 3
4
Back (X389-359)
(389 x 359mm)
Rail (D2544A)
(363 x 78mm) x 2
5
Drawer Front (D2545A)
(359 x 162mm)
9 10
7
8
6
Left Drawer Side (W370-124LH)
(370 x 124mm)
Right Drawer Side (W370-124RH)
(370 x 124mm)
Drawer Base (T342-367)
(342 x 367mm)
Left Side (D2924A)
(388 x 396mm)
Right Side (D2925A)
(388 x 396mm)
Drawer Back (W331-124)
(331 x 124mm)
Horizontal (D2541A)
(363 x 394mm) x 2
Please check you have all the fittings listed below
Tools required
3
Components - Fittings
If you have damaged or missing components, call the
Customer Helpline: 03456 400800 quoting the reference
numbers below
Note: The quantities below are the correct amount to complete the assembly. In some cases more fittings may be supplied than are required.
Rule Scissors Hammer
Eye protection (when using a hammer or drill)
Cross-head screwdriver
Ruler - Use this ruler to help correctly identify the screws
mm 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 160 170
A
Wooden dowel (F22) x 8
B
Metal dowel (F901) x 14
C
D E F
G H I
J K
9mm Screw (F74) x 2 9mm Screw (F73) x 4
Drawer runner (F1004) x 2
Knock-in Peg (F171GY) x 4
Small locking nut (F3) x 2
Large locking nut (F900) x 12
Nail (F51) x 10
Handle (F315) x 1
25mm Screw (F95) x 2
M
Plastic Nail (F91) x 4
L
Wedgefix (F639) x 2
Short cross-head
screwdriver
Loading...
+ 8 hidden pages