Argos 8 Cube Storage Unit ASSEMBLY INSTRUCTIONS

8 Cube Storage Unit

Assembly Instructions - Please keep for future reference

011 xx 3557

Dimensions

Width - 61.2cm

Depth - 29.5cm

Height - 120.8cm

GREAT BRITAIN

Important - Please read these instructions fully before starting assembly

If you need help or have damaged or missing parts, call the Customer Helpline: 08450613967
Please turn to back page for important information when contacting Customer Helpline.

01709 534123

MADE IN

Rev B - 01/07/2013

Safety and Care Advice

Important - Please read these instructions fully before starting assembly

Check you have all the
components and tools listed on
pages 2 and 3.

Remove all fittings from the
plastic bags and seperate them
into their groups.

Keep children and animals
away from the work area, small
parts could choke if swallowed.

Make sure you have enough
space to layout the parts before
starting.

Care and maintenance

Do not stand or put weight on
the product, this could cause
damage.

Assemble the item as close
to its final position (in the same
room) as possible.

Assemble on a soft level
surface to avoid damaging the
unit or your floor.

Parts of the assembly will be
easier with 2 people.

We do not
recommend the
use of power
drill/drivers for

inserting screws,

as this could damage the unit.
Only use hand screwdrivers.

Do Not dispose of packaging
until assembly complete.

Dispose of all packaging
carefully and responsibly
when assembly complete.

To protect the furniture,
position the furniture out of
direct sunlight and away from
direct heat sources such as
radiators and fires.

Do not place the furniture in
excessively dry and humid
conditions.

From time to time check that
there are no loose screws on
this unit.

Always lift furniture when
moving it (do not drag)
otherwise the joints may be
damaged.

Do not place hot or cold
objects on the surface, always
use protective mats to avoid
marking the furnture.

This product should not be
discarded with household
waste. Take to your local
authority waste disposal centre.

Clean spills up immediately

Dust surfaces with a soft, dry,
lint free cloth.

More stubborn marks can be
removed using a damp
(not wet) cloth. Wipe the
surface dry immediately
using a soft lint free cloth.

Do not use detergents, abrasive
cleaning products or cleaning
products that contain ammonia,
solvents or silicone as these
may damage the surface finish.

1

Components - Panels

Please check you have all the panels listed below

Important - Thick lines indicate finished edges

9096

9101

Top / Bottom x2 (58.0x29.3cm)

Back Panel x4 (30.8x29.5cm)

9121

9097

End Panel x2

Shelf x3 (58.0x29.3cm)

(120.8 x 29.5cm)

9098

Divider x4 (28.2x29.1cm)

2

If you have damaged or missing components, call the

Components - Fittings

Customer Helpline: 0845 0613967

for important information when contacting Customer Helpline.

01709 534123

Please turn to back page

Please check you have all the fittings listed below

Note: The quantities below are the correct amount to complete the assembly, In some case more
fittings may be supplied than are required.

A

D

G H

45mm screw x 10
Code 690001075

L bracket x 1
Code 760001901

Panel Pin Locator
Code 684004501

B

E

Dowel 30mm x 16
Code 770001006

12mm screw x 2
Code 690001099

Cover cap x 10

C

F

Dowel 50mm x 6
Code 770003550

Panel pin x 32
Code 760001012

Tools required

Large Cross
Headed
Screwdriver

Small Hammer

Eye protection
(when using a
hammer)

Ruler - Use this ruler to help correctly identify the screws

mm

10

0

20

30

3

40

50

60

70

80

90

100

Tape Measure

110

120

130

140

150

160

170