Page 1
Star 2+2 Drw. Chest White
Assembly Instructions - Please keep for future reference
8053011
Dimensions
Length - 86cm
Depth - 40cm
Height - 73cm
Weight - 26,4kg
Important – Please read these instructions fully before starting assembly
If you need help or have damaged or missing parts, call the Customer Helpline:
0045 7668 8055 or e-mail: order@fl exa.dk
Issue 1 - 06/10/17
Page 2
Safety and Care Advice
Important – Please read these instructions
fully before starting assembly
• Check you have all the
components and tools listed on
pages 2 and 3.
• Remove all fi ttings from the
plastic bags and separate them
into their groups.
• During assembly children
should be kept away from the
product due to possible risk of
injury.
• Make sure you have enough
space to layout the parts before
starting.
•This product is suitable for
children in the age range 3 to
adult
Care and maintenance
• Only clean using a damp cloth
and mild detergent, do no use
bleach or abrasive cleaners.
• Regularly check all fastenings
to ensure that they properly
tightened.
• Do not stand or put weight on
the product, this could cause
damage.
• Assemble the item as close
to its fi nal position (in the same
room) as possible.
• Assemble on a soft level
surface to avoid damaging the
unit or your fl oor.
• Parts of the assembly will be
easier with 2 people.
• Do not use this item if any
components are missing or
damaged
• This product should not be
discarded with household waste.
Take to your local authority
waste disposal centre.
• We do not
recommend the
use of power
drill/drivers for
inserting screws,
as this could
damage the unit. Only use hand
screwdrivers.
• Dispose of all packaging
carefully and responsibly.
• Assembly to be carried out by
a competent adult only.
• This product is suitable for
children in the age 4-12 years.
Maximum load on chest 30 kg.
Maximum load in each drawer
7 kg.
1
Page 3
If you have damaged or missing components,
Components - Parts
call the Customer Helpline: 0045 7668 8055
Please check you have all the parts listed below
Top x1
1
(86.0x40.0x1.6cm)
No. 4301-1608601-40
Leg x4
4
(71.4x4.0x2.6cm)
No. 12-02607141-20
List x1
7
(74.8x2.5x1.5cm)
No. 12-01507483-20
Side panel Right x1
2
(65.4x36.1x1.2cm)
No. 4301-1206541-40 No. 4301-1206542-40
Plinth Straight x1
5
(74.8x5.0x1.5cm)
Drawer side Right x4
8
(35x16.7x1.3cm)
No. 15-01303503 No. 15-01303504
Side panel Left x1
3
(65.4x36.1x1.2cm)
Cross rail x1
6
(74.8x6.5x1.5cm)
No. 12-01507482No. 12-01507484-40
Drawer side Left x4
9
(35x16.7x1.3cm)
Drawer front x2
10
(37.1x18.9x1.6cm)
No. 4301-1603713-40
Drawer back x2
13
(71.6x16.7x1.3cm)
No. 15-01307161
Drawer back x2
11
(32.5x16.7x1.3cm)
No. 15-01303251 No. 4301-1607443-40
Drawer base x2
14
(34.8x33.7x0.3cm)
No. 4309-0303482 No. 4301-1603612-40
Drawer front x2
12
(74.4x18.9x1.6cm)
Partition x1
15
(36.1x21.7x1.6cm)
2
Page 4
If you have damaged or missing components,
Components - Parts
call the Customer Helpline: 0045 7668 8055
Please check you have all the parts listed below
Back panel x1
16
(62.8x77.2x0.3cm)
No. 4309-030628 No. 4309-0307281
Drawer base x2
17
(72.8x34.8x0.3cm)
3
Page 5
Components - Fittings
Please check you have all the fi ttings listed below
Note: The quantities below are the correct amount to complete the assembly. In some cases more fi ttings
may be supplied than are required.
No. 4020-007
A
7x34mm for ø5 Minifi x bolt x25
No. 4010-027
D
310x27x10mm Drawer slide x8
No. 3901-35035 No. 3912-04009
i
3.5x35mm Chipboard screw x19
No. 41-00179
L
Overbalance protector x2
No. 3933-15010
B
ø15x9.5mm Minifi x cam x25
No. 3940-00009
E
C
4.0x30mm Chipboard screw x16
F
No. 3903-40030
No. 4022-004
1.6x16mm Nail square x24ø18/ø6,5x9.0mm Spacer x6
No. 4008-112
No. 3930-08030
G H
44x23x23 Angle x2
J
ø9.5/M4x9mm Machine screw x8
No. 3907-42010 No. 3907-58019
8x30mm Dowel x24
No. 3907-58008
K
ø5.8x8mm Euro screw x12
M N
ø4.2x9.5mm Euro screw x8 ø5.8x19mm Euro screw x10
Tools required
Phillips
screwdriver
(medium)
Flatblade
screwdriver
(medium)
Allen key
4mm incl.
No. 4033-004
Small
hammer
Ruler/tape
measure
Eye protection
(when using a
hammer or glue)
Page 6
Assembly Instructions
Step 1
Insert the dowels H into
the holes in cross rail
6
It may be necessary
to tap the dowels in
very gently with a small
hammer.
A
Attach minifi x bolts
1
top panel
.
to
Step 2
Attach the side panels
2
and 3 to the legs 4
C
using screws
.
Make sure the top of
the side panel is fl ush
with the legs and there
are no gaps between
the side panel and the
edge of the groove in
the legs.
Step 3
H
Insert the dowels
the holes in the partition
15
.
Attach the drawer runner
D
to the partition 15 with
euro screws
N
Be aware of the front
edge! Note that the
screws must be
inserted from different
holes in the runners!
into
.
A
A
.
H
A
H
6
C
C
C
C
2
4
4
C
4
3
C
C
C
4
2
A
A
A
A
1
H
UP
C
C
C
C
4
C
H
C
2
C
4
A
UP
C
C
H
D
H
N
N
15
N
N
D
Front edge
D
N
Front edge
5
Page 7
Assembly Instructions
Step 4
Attach the second drawer
D
runner
15
with euro screws N.
to the partition
Be aware of the front
edge! Note that the
drawer screws must be
inserted from different
holes in the runners!
Step 5
H
2
and
. Note
and
E
placed
to
A
to
Insert the dowels
the holes in the side
2
panels
and 3.
Attach minifi x bolts
the side panels
3
.
Attach the drawer
D
runners
panels
euro screws
to the side
2
and 3 with
K
that the upper runners
need to be attached
with screws
N
have spacers
between the side panel
and runner.
Be aware of the front
edge!
N
D
15
N
Front edge
Front edge
A
H
H H
H H
Left side Right side
E E
3
E E
N N
N
K
K
K
K
N
N
N
E
E
D D
N N
D D
K
D D
K
A A
D
D
N
K
E
K
K
2
N
K
K
K
K
Front edge
Front edge
Front edge
ForwardForward
K
D
D
KK
6
Page 8
Assembly Instructions
Step 6
Attach the cross rail 6
2
to the side panels
3
and
cams
with the minifi x
B
.
B
2
B
6
3
Step 7
G
Attach angles
5
plinth
M
.
using screws
Attach plinth
2
panels
screws
and 3 using
M
.
to the
5
to side
Step 8
Attach the partition
1
B
.
using
the top panel
minifi x cams
15
to
M
G
M
5
M
G
G
5
M
M
B
B
5
15
B
B
B
1
7
Page 9
Assembly Instructions
Step 9
Attach the top 1 to the
2
side panels
with the minifi x cams
and 3
B
B
.
1
2
B
B
B
3
Step 10
7
Fasten the list
top panel using screws
i
, placing the screws
into the marking holes in
1
top
.
Don’t overtighten.
to the
i
i
7
i
i
8
Page 10
Assembly Instructions
Step 11
Attach the back panel 16
F
with nails
side of the chest.
Nail the back panel
16
to the carcass,
ensuring that there are
NO GAPS between the
1
top
panel
measurements.
to the back
and the back
16
. Follow the
F
28 mm
28 mm
28 mm
16
F
28 mm
Step 12
Measure out the
positions for the wall
attachment straps.
Drill two holes spaced
as illustrated with the
appropriate size for the
wall attachment fi tting
(see next step).
Pull the two straps
through the gaps in
1
top plate
furniture against the wall
and secure the strap
under the top plate with
washer and screw.
.Push the
L
69 cm
L
L
60,5 cm
1
L
9
Page 11
Assembly Instructions
Step 12b
Different types of wall
fi ttings. Contact your
local DIY or hardware
store for the wall plugs
and screws.
Concrete/Brick wall
Plaster wall
Step 13
H
Insert the dowels
the holes in the drawer
8
sides
and 9.
Attach the minifi x bolts
A
to the drawer front 10
12
and
.
Repeat for all drawer
sides and drawer fronts.
into
Wooden wall
A
H
8
12
H
H
9
H
H
A
A
A
A
A
A
A
A
10
10
Page 12
Assembly Instructions
Step 14
Attach the drawer sides
8
and 9 to the drawer
10
front
cams
with the minifi x
B
.
B
10
B
Repeat for both drawers.
Step 15
Push the drawer base
carefully into the drawer.
Note that one edge of the
base is slightly narrower
(11 mm) than the other,
make sure the narrow
edge goes in fi rst.
Attach the drawer back
11
to the drawer sides
8
and 9 with the
i
screws
.
Repeat for both drawers.
14
B
B
B
8
9
i
i
10
8 14
i
9
348 mm.
337 mm.
11
i
Step 16
Attach the drawer sides
8
and 9 to the drawer
12
front
cams
Repeat for both drawers.
with the minifi x
B
.
i
B
B
12
B
B
8
9
11
Page 13
Assembly Instructions
Step 17
Push the drawer base 17
carefully into the drawer.
Attach the drawer back
13
to the drawer sides
8
and 9 with the
i
screws
.
i
12
i
9
i
Repeat for both drawers.
Step 18
Place the assembled
drawer between the
D
drawer runners
Attach the drawer sides
8
and 9 to the runners
using the screws
Repeat for all drawers.
.
J
F
.
17
13
8
i
i
J
Assembly is complete.
If you need help or have damaged or missing parts,
E-mail: order@fl exa.dk
8
J
J
9
J
9
call the Customer Helpline: 0045 7668 8055
Ref.no. 44-01735-20 A Stand: 061017 Page 13 (81-31303-20)
12
Loading...