Argos 8042572, 8103332 ASSEMBLY INSTRUCTIONS

Mia Daybed & Drw. White
Assembly Instructions - Please keep for future reference
8042572
Dimensions
Length - 193,2cm Depth - 95,4cm Height - 68cm Weight - 47,3kg
Important – Please read these instructions fully before starting assembly
Issue 1 - 08/07/17
Safety and Care AdviceSafety and Care Advice
Important – Please read these instructions fully before starting assembly
80-27904-20 Singlebed
IMPORTANT! KEEP FOR FUTURE REFERENCE
PLEASE DISPOSE OF PACKAGING MATERIAL.
PLASTIC BAGS CAN BE DANGEROUS TO YOUNG CHILDREN
WARNING! Not suitable for children under 4 years.
WARNING! Do not place this child’s bed near heat sources, windows and other furniture.
WARNING! Do not use this child’s bed if any of the parts are broken, torn or missing.
WARNING! Once assembled, this bed must not be disassembled. Screws must not be removed once inserted.
This child’s bed is to be used with a 1900mm x 900mm ma ress.
Suitable for over 4 years old to adults.
All assembly Įxings should be checked periodically and re-
Children are likely to play, bounce, jump and climb on beds, therefore the child’s bed should not
be placed too close to other furniture or windows, bl
placed either
Any addi
ght to any wall or have a gap of 300mm between the wall and the side of the bed.
Always place the side of the bed with the safety rail against a wall.
onal or replacement parts should only be obtained from the manufacturer or distributor.
This product complies to standard BS8509: 2008+A1:2011
ind cords, curtain pulls or other strings or cords, and should be
ghtened where necessary.
CARE AND MAINTENANCE
To clean use a damp cloth, avoiding the use of strong detergents or abrasives.
1
Safety and Care Advice
Important – Please read these instructions fully before starting assembly
• Check you have all the components and tools listed on pages 2 and 3.
• Remove all fi ttings from the plastic bags and separate them into their groups.
• Keep children and animals away from the work area, small parts could choke if swallowed.
• Make sure you have enough space to layout the parts before starting.
Care and maintenance
• Only clean using a damp cloth and mild detergent, do no use bleach or abrasive cleaners.
• Do not stand or put weight on the product, this could cause damage.
• Assemble the item as close to its fi nal position (in the same room) as possible.
• Assemble on a soft level surface to avoid damaging the unit or your fl oor.
• Parts of the assembly will be easier with 2 people.
• From time to time check that there are no loose screws on this unit.
• We do not recommend the use of power drill/drivers for inserting screws,
as this could damage the unit. Only use hand screwdrivers.
• Dispose of all packaging carefully and responsibly.
• This product should not be discarded with household waste. Take to your local authority waste disposal centre.
Note: if required the next page can be cut out and used as reference throughout the assembly. Keep this page with these instructions for future reference.
2
Loading...
+ 6 hidden pages