Argos 7966422 ASSEMBLY INSTRUCTIONS

Highsleeper - Brooklyn
Assembly Instructions - Please keep for future reference
8268507
Dimensions
Length - 200,4cm Depth - 106cm Height - 184,7cm Weight - 47kg
Important – Please read these instructions fully before starting assembly
Issue 4 - 30/08/18
Safety and Care Advice
Important – Please read these instructions fully before starting assembly
• Check you have all the components and tools listed on pages 2 and 3.
• Remove all fi ttings from the plastic bags and separate them into their groups.
• Keep children and animals away from the work area, small parts could choke if swallowed.
• Make sure you have enough space to layout the parts before starting.
Care and maintenance
• Only clean using a damp cloth and mild detergent, do no use bleach or abrasive cleaners.
• Do not stand or put weight on the product, this could cause damage.
• Assemble the item as close to its fi nal position (in the same room) as possible.
• Assemble on a soft level surface to avoid damaging the unit or your fl oor.
• Parts of the assembly will be easier with 2 people.
• From time to time check that there are no loose screws on this unit.
• We do not recommend the use of power drill/drivers for inserting screws,
as this could damage the unit. Only use hand screwdrivers.
• Dispose of all packaging carefully and responsibly.
• This product should not be discarded with household waste. Take to your local authority waste disposal centre.
IMPORTANT - READ CAREFULLY -RETAIN FOR FUTURE REFERENCE
ASSEMBLY:
Always follow the instruction. Current legislation requires that the high bed / bunk bed must be fi tted with 4 safety-rails and a ladder or platform for the upper bunk. The high bed / bunk bed meets the European EN 747:2012 A1:2015 standards for security and durability.
MATTRESS:
This bed is designed to use a mattress size 190 cm long and 90 cm wide. The total thickness must not exceed 19,5 cm. The mattress top must not pass the marking on the ladder / the post for the safety-rail.
WARNING:
High beds and the upper bed of bunk beds are not suitable for children under six years due to the risk of injury from falls. Bunk beds and high beds can present a serious risk of injury from strangulation if not used correctly. Never attach or hang items to any part of the bunk bed that are not designed to be used with the bed, for example, but not limited to ropes, strings, cords, hooks, belts and bags. Children can be become trapped between the bed and the wall, a roof pitch, the ceiling, adjoining pieces of furniture (e.g. cupboards) and the like. To avoid risk of serious injury the distance between the top safety barrier and the adjoining structure shall not exceed 75 mm or shall be more than 230 mm. Do not use the high bed / bunk bed if any structural part is broken or missing.
MAINTENANCE INSTRUCTIONS:
Check regulary that all assembly fastenings are properly tightened. Ventilation of the room is necessary in order to keep the humidity low and to prevent mould in and around the bed.
1
If you have damaged or missing components,
Components - Parts
call the Customer Helpline:
Please check you have all the parts listed below
0045 7668 8055
Tread x4 (31,8x6,5x2,6cm)
1
No. 12-02603182-20
Filling x2
4
No. 4301-0808653-20
(86,5x29,8x0,8cm)
2
Endrail x2 (86,5x8,9x2,0cm)
No. 12-02008653-20
Slat x18 (89,7x5,5x1,1cm)
5
No. 12-01108971
Short post x1
3
(35,3x4,3x4,3cm) No. 12-04303531-20
Top rail x2
6
(100,2x8,2x2,4cm)
No. 12-02410021-20
Endrail x2
7 8
(86,5x5,5x5,5cm)
No. 12-05508651-20 No. 12-020086510-20
Ladder side x2
9
(179,3x8,9x2,0cm)
No. 12-02017931-20
Endrail x2
(86,5x8,9x2,0cm)
2
If you have damaged or missing components,
Components - Parts
call the Customer Helpline:
Please check you have all the parts listed below
0045 7668 8055
Bedside x2
10
(186.7x8.9x2.0cm) No. 1305-186710-20
Leg x2
13 14
(182,3x5,5x5,5cm) No. 12-05518231-20 No. 12-05518232-20
Safety rail x3
11 12
(186.7x8.9x2.0cm) No. 12-02018672-20 No. 12-02014661-20
Leg x2
(182,3x5,5x5,5cm)
Safety rail x2
(146,6x8.9x2.0cm)
3
Loading...
+ 8 hidden pages