– Please read these instructions fully before starting assembly
Issue 1 - 13/09/13
Safety and Care Advice
Important – Please read these instructions fully before starting assembly
Read these instructions
carefully and familiarise
yourself with the procedure
before assembling the unit.
Check that you have all the
component parts following the
list on the back cover and
familiarise yourself with each
part before proceeding.
Take all the fittings out of the
plastic bag and separate them
into their groups.
Ensure you have enough
space to lay out all the parts
before assembly.
To avoid scratching it is
recommended that you
assemble the unit on a soft
level surface.
Keep children and animals
away from the work area,small
parts could choke if swallowed.
This product is manufactured
from toughened safety glass.In
the unlikely event that the
glass fails it will break into a
large number of small
fragments that may be spread
over a wide area.
This is a feature of
toughened glass,designed to
remove the risk of injure from
glass breaking into large
shards.
If the glass is chipped or
broken,replace with the same
type of glass.Consult the
furniture retailer or agent with
regard to obtaining a
manufacturing specification of
the shape for replacement
glass quoting the model
numbers,and batch number or
date of manufacture of this
items.
It would be useful to ask
someone to help you during
assembly.
To use a parasol with this
table,please remove the plastic
centre plug and put the parasol
pole through the table top and
centre connector ring,a
weighted parasol base must be
used.
Dispose of all packing
carefully and responsibly.
Do not place very hot or cold
items against or in close
proximity to glass surface
unless an adequately thick
insulating material is used to
prevent such items from
coming into contact with the
glass.
Do not strike the glass with
hand or pointed items.
Do not sit or stand on the
glass surface,as this would be
hazardous.
Do not over-tighten as this
may damage the glass.
Warning:
The unit
weights approximately
kgs.
56
Please lift with care.
Care and maintenance
To avoid any risk of
suffocation to animals or
children dispose of the plastic
bags immediately.
As with all surface clean with
a damp cloth and mild
detergent, rinse thoroughly dry
frame completely,do not use
bleach or abrasive products.
In order to prolong the life
and beauty of your table, we
recommend the use of furniture
covers and store in a dry and
secure area when not in use.
When moving the
table,remove the parasol and
lift the table,do not drag.
From time to time please
ensure there are no loose
screws on the product.
1
Components - Parts & Fittings
If you have damaged or missing components, call the
Please check you have all the parts & fittings listed below
Customer Helpline: Argos = 0345 6400800
12
Table top frame x 1
4
Support x 2Big glass table top x 1Small glass table top x 1
BCA
3
Lazy susan x 1
5
6
Table leg x 2
M6x20
Screw cap x 12
Allen key x 1
D
Washer x 12
Ruler - Use this ruler to help correctly identify the screws
Repeat above steps to
assemble the other table
legs.
A
B
1
3
Note: During assembly do
not lay the glass directly
onto hard or rough surfaces.
We recommend laying the
glass on a blanket or
cardboard during assembly.
You could even use the box.
Important:
Do not fully
tighten all screws
until assembly is
complete.
Step 2
Fix table supports
Use screws and
washers to fix the
table supports onto
the unit.
A
B
4
A
1
B
A
B
A
4
A
B
Repeat above steps to
assemble the other table
supports and then fully
tighten all the screws
with caps .
This product is for domestic
use.
C
C
3
Assembly Instructions
Step 3
Place glass table top
Turn the table up and
carefully place the glass
table top onto the unit.
Put the lazy susan
onto the unit and place
the small glass table top
6
onto the lazy susan.
Note:
must be used with
parasol. Do not use lazy
susan alone.
Note:
not scratch the glass
top during assembling.
5
The lazy susan
Be careful and do
2
6
2
5
Assembly is complete
Note:When lifting or
moving the product, ask for
someone to lend a hand,
trying to move a product
on your own can lead to
accidents.
Warning:
To reduce the risk of the
glass for smashing,
please ensure you use a
suitable parasol base.
If you need help or have damaged or missing parts, call the
Customer Helpline: Argos = 0345 6400800
For further assistance please visit http://www.argos-support.co.uk
During assembly do not lay the glass directly onto hard or rough surfaces.
We recommend laying the glass on a blanket or cardboard during
assembly. You could even use the box.
When lifting or moving the product , ask for someone to lend a hand, trying
to move a product on your own can lead to accidents.
Do not use furniture if any parts are missing or broken. Contact your
retailer immediately.
Do not place very hot or very cold items, such as saucepans or barbecues,
directly on the glass surface. Extreme temperature differences over small
areas can damage glass.
Do not sit or stand upon the glass surface.
Do not strike the glass with hard or pointed items, or use the glass
chopping surface.
Do not drag rough or heavy objects over the top of the glass.
We recommend using place mats, coasters and table cloths to help
protect against scratches and accidentally dropped items.
Clean the glass regularly to make sure there are no grit on the top.
Do not clean glass with washing powders or any other substances
containing abrasives, since these substances can scratch glass.
For tables that can be used outdoors, if your table has a parasol, make
sure the edge of the parasol cut-out has a protector in place. In addition
always use a weighted parasol base, and remove the parasol in windy
conditions. Parasols can put pressure on the table top or even blow the
table over in wi
For tables that can be used outdoors it is advised that the table is kept
covered when not in use to protect the glass from the weather and
accidental damage.
ndy weather.
as a
Loading...
+ hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.