Argo LOXO Operating Instructions Manual
10
V 04/19
OPERATING INSTRUCTIONS
ELECTRIC HEATER WITH
CARBON FIBER HEATING ELEMENTS
EN
LOXO
This product is only suitable for correctly-insulated
environments or for occasional use.
Read the instructions carefully before operating the appliance or carrying out maintenance
operations.
Observe all the safety instructions; failure to observe the instructions may lead to accidents and/or
damage. Keep these instructions in a safe place for future reference.
GENERAL SAFETY INFORMATION
11
V 04/19
• Use this carbon fiber heater only as outlined in this manual. Any
other use not recommended by the manufacturer may cause fire,
electric shock or injury to people.
• Ensure that the mains power complies with the voltage specified
on the carbon fiber heater data plate (230V~/50Hz).
• This appliance can be used by children aged from 8 years and
above and people with reduced physical, sensory or mental
capabilities or lack of experience and knowledge if they have been
given supervision or instruction concerning use of the appliance in
a safe way and understand the hazards involved.
• Children shall not play with the appliance.
• Cleaning and user maintenance shall not be made by children
without supervision.
• This product is not a toy.
• Children under the age of 3 years must be kept out of reach unless
properly supervised
• Children aged between 3 and 8 years must only be able to turn
the appliance on/off, provided that the appliance has been placed
in its normal operating position, that instructions have been given
on how to use the equipment safely, and that its risks have been
understood.
• Children aged between 3 and 8 years must not be able to plug in,
adjust, clean or perform any maintenance on the appliance.
• WARNING: Certain parts of this product may become very hot
and cause burns. Special care should be taken when children
and vulnerable people are nearby.
• WARNING: In order to avoid hazard due to inadvertent resetting of
the thermal cut-out, this appliance must not be supplied through
and external switching device, such as a timer, or connected to a
circuit that is regularly switched on and off by the utility.
• WARNING: do not use the fan heater with a controller or any other
external device that activates the appliance automatically, as there
12
V 04/19
may be a risk of fire if the fan heater is covered or incorrectly
positioned.Do not restrict the air inlet and outlet grilles.
• The appliance heats up slightly when in use. In order to avoid
burns, do not let bare skin touch hot surfaces.
• Ensure that all objects are at least 1 meter from the front and sides
of the appliance.
• Disconnect the mains power when the appliance is not used or for
cleaning operations.
• Avoid using the carbon fiber heater in dusty environments or in the
presence of inflammable vapors (e.g. in workshops or garages) or
paint vapors.
• Do not place anything on the appliance, use the appliance to dry
clothing.
• Use the appliance in a well-ventilated area.
• Avoid placing fingers or foreign objects in the air inlet/outlet grilles,
as this may lead to electric shock or fire and may damage the
appliance.
• To avoid the risk of fire, do not block the grilles or tamper with
them in any way while the carbon fiber heater operates.
• Do not use the appliance if the cord or plug are damaged. If
the power supply cord is damaged, it must be replaced by the
manufacturer, dealer or a similarly qualified person so as to avoid
any safety risks.
• Do not operate the appliance if it has fallen from a height or has
suffered damage in any way. Contact qualified technical personnel
to examine the appliance or perform any electrical or mechanical
repairs.
• The most common cause of overheating is the build-up of dust in
the appliance. Remove dust deposits by unplugging the appliance
and cleaning the air outlets and grilles with the aid of a vacuum
cleaner.
• Do not use abrasive detergents for cleaning this appliance. Clean
the appliance with the aid of a damp (not wet) cloth rinsed in hot
Loading...