About Our Warranty ................................................................................................................................... 3
Global (3 Year) Limited Warranty ............................................................................................................ 3
Camera Overview ....................................................................................................................................... 4
Camera Power Up...................................................................................................................................... 8
Reset to Factory Default ............................................................................................................................. 9
Camera Discovery, Setup, and Configuration ........................................................................................... 10
Camera Discovery ................................................................................................................................ 10
Web Interface Navigation ..................................................................................................................... 11
Video .................................................................................................................................................... 17
About ................................................................................................................................................... 34
Support ................................................................................................................................................ 34
ARECONT VISION warrants to Purchaser (and only Purchaser) (the “Limited Warranty”), that: (a) each
Product shall be free from material defects in material and workmanship for a period of thirty-six (36) months
from the date of shipment (the “Warranty Period”); (b) during the Warranty Period, the Products will materially
conform with the specification in the applicable documentation; (c) all licensed programs accompanying the
Product (the “Licensed Programs”) will materially conform with applicable specifications. ARECONT VISION
warrants to Purchaser (and only Purchaser) (the “Limited Warranty”), that: (a) each Product shall be free from
material defects in material and workmanship for a period of thirty-six (36) months from the date of shipment
(the “Warranty Period”); (b) during the Warranty Period, the Products will materially conform with the
specification in the applicable documentation; (c) all licensed programs accompanying the Product (the
“Licensed Programs”) will materially conform with applicable specifications.
ARECONT VISION warrants to Purchaser (and only Purchaser) (the “Limited Warranty”), that: (a) each
Product shall be free from material defects in material and workmanship for a period of thirty-six (36) months
from the date of shipment (the “Warranty Period”); (b) during the Warranty Period, the Products will materially
conform with the specification in the applicable documentation; (c) all licensed programs accompanying the
Product (the “Licensed Programs”) will materially conform with applicable specifications.
During the Warranty Period, the Products will materially conform with the specification in the applicable
documentation; (c) all licensed programs accompanying the Product (the “Licensed Programs”) will materially
conform with applicable specifications.
3
Contera Indoor Dome | Installation Manual
Contera Micro Bullet IP Megapixel Cameras
Camera Overview
The Contera
for optimum performance. The Contera Micro Bullet combines a day/night mechanical IR cut filter with an
integrated 3.6mm lens.
Regardless of the time of day, the Contera Micro Bullet is prepared for any lighting condition. For
applications with poor lighting conditions, Enhanced WDR™ (wide dynamic range) at 120dB provides the
best visual balance to shaded and bright light conditions.
For clear color images in low-light, NightView™ offers strong low-light sensitivity for capturing details in
extremely poor-lit scenes. Built-in Smart IR LED illumination automatically adjusts output in response to the
distance of an object in view to prevent over-exposure when the object is very close to the camera.
Arecont Vision was the first to bring H.264 to the mainstream market and recently developed SNAPstream™
(Smart Noise Adaptation and Processing) technology for reducing bandwidth without impacting image
quality. Today we are proud to offer our next generation H.265 with SNAPstream+™ smart codec capable of
delivering high quality video while saving over 50% of the data rate to reduce or prevent strain on the
network.
The camera’s power can be supplied via a Power-over-Ethernet (PoE - IEEE 802.3af) compliant network
cable connection.
®
Micro Bullet outdoor-ready megapixel camera features 1080p and 5-megapixel (MP) resolution
The Contera Micro Bullet is IP66 rated for both indoor and outdoor applications. All models feature an impact
resistant cast-aluminum housing capable of withstanding the equivalent of 55 kg (120 lbs) of force.
The Contera Micro Bullet is ONVIF (Open Network Video Interface Forum) Profile S compliant, providing
interoperability between network video products regardless of manufacturer.
4
Contera Indoor Dome | Installation Manual
CAUTION!
Description
QTY
1. Do not attempt to service a damaged unit yourself. Refer all servicing to qualified service personnel.
2. Wiring methods shall be in accordance with the National Electrical Code/NFPA 70/ANSI, and with all
local codes and authorities having jurisdiction. Wiring should be UL Listed and/or Recognized wire
suitable for the application.
3. Always use hardware e.g. screws, anchors, bolts, locking nuts etc. which are compatible with mounting
surface and of sufficient length and construction to insure a secure mount.
Package Contents
AV02CMB-100/ AV05CMB-100 IP camera 1
Mounting Template 1
Accessory Pack 1
•
AV02CMB-100/ AV05CMB-100
5
Contera Indoor Dome | Installation Manual
•
Cables
6
Contera Indoor Dome | Installation Manual
Installation
The Contera
plastic, metal and concrete.
1. Determine a secure location to mount the camera
2. Use the template, anchors, and screws provided to prepare the mounting provisions for the camera
3. Install three supplied dry wall anchors using the supplied mounting template
4. Connect the network cable to the camera’s RJ45 connector
5. Align three supplied screws with the dry wall anchors and the camera into place
®
Micro Bullet camera can be directly attached onto hard ceilings or walls including wood,
installation.
6. To configure the camera, reference the camera discovery, set-up and configuration section.
7. Follow below instruction to adjust the Pan/ Tilt and rotate the gimbal for the desired field of view.
NOTE: Do not remove the screws!
7
Contera Indoor Dome | Installation Manual
CAUTION!
LED
Status
Description
Camera Power Up
This product should be installed by a qualified service technician in accordance with the National
Electrical Code (NEC 800 CEC Section 60) or applicable local code. Wiring methods shall be in accordance
with the National Electrical Code/NFPA 70/ANSI, and with all local codes and authorities having jurisdiction.
Wiring should be UL Listed and/or Recognized wire suitable for the application.
1. Connect the camera to a PoE port on 100Mbps network PoE switch using an Ethernet cable.
2. Connect the PoE switch to your computer’s network port using an Ethernet cable.
Green Quick Flashing Link has been established
Slow Flashing Normal operation
None None No Connection
8
Contera Indoor Dome | Installation Manual
Reset to Factory Default
1. Press and hold the reset button for 2 to 5 seconds and release the reset button. The camera has
been reset to the factory default except the network settings.
2. Press and hold the reset button for more than 5 seconds and release the reset button. The camera
has been reset to the factory.
3. Or, user can reset the camera to factory default via camera web interface or AV IP Utility
9
Contera Indoor Dome | Installation Manual
Camera Discovery, Setup, and Configuration
For camera discovery and setup, the AV IP Utility is recommended. The software can be found at Arecont
Vision website: http://www.arecontvision.com/softwares.php
The AV IP Utility has the ability to provide multiple discovery options, including broadcast and multicast,
check the status of a camera, change camera settings, import and export camera settings via a .csv file, and
update firmware and/or hardware from virtually anywhere with a network connection.
Whether used for large installations that require an update to multiple settings, or smaller installations where
only one camera needs changed, the AV IP Utility tool is efficient and convenient for mass or single camera
uploads.
®
The AV IP Utility tool is compatible with all Contera
Arecont Vision website: http://www.arecontvision.com/softwares.php
cameras. The user manual for the software is available at
Camera Discovery
1. Locate and double click the AV IP Utility shortcut on the desktop.
2. When the AV IP Utility is launched, it will automatically search the Contera cameras on the network.
Or, you can also manually search cameras by clicking “Discovery (Multicast)”
3.
You can access the camera web user interface by typing the camera IP address on the preferred
web browser.
10
Contera Indoor Dome | Installation Manual
Web Interface Navigation
The entire menu categories are located on the top of the web interface, and clicking on any one of the
buttons will cause left side of the page to jump to the settings section for the selected button.
The following are the camera settings available on the top of the web interface:
The following are the camera settings available on the top of the web interface:
•
Image
•
Basic Image Settings
•
WDR (Wide Dynamic Range) Settings
•
IR Control
•
OSD (On-Screen Display)
•
ROI (Regions of Interest)
•
Video
•
Main Stream Configuration
•
Sub Stream Configuration
•
Third Stream Configuration
•
Network
•
IP Assignment
•
QoS (Quality of Service)
•
UPnP (Universal Plug and Play)
•
RTSP (Real Time Streaming Protocol)
•
DDNS (Dynamic DNS)
•
SNMP (Simple Network Management Protocol)
•
SSL (Secure Sockets Layer)
•
FTP (File Transfer Protocol)
•
802.1x
•
Privacy Mask
•
Event
•
Motion Detection
•
Alarm Handler
•
Digital I/O
•
Tamper Detection
•
FTP Upload Handler
•
SMTP (Simple Mail Transfer Protocol) Notification
•
Network Storage
•
System Options
•
Firmware Upgrade
•
Reboot & Restore Settings
•
Date/Time
11
Loading...
+ 25 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.