About Our Warranty ................................................................................................................................... 3
Global (3 Year) Limited Warranty ............................................................................................................ 3
Camera Overview ....................................................................................................................................... 4
Camera Power Up...................................................................................................................................... 9
Video .................................................................................................................................................... 19
About ................................................................................................................................................... 36
Support ................................................................................................................................................ 36
ARECONT VISION warrants to Purchaser (and only Purchaser) (the “Limited Warranty”), that: (a) each
Product shall be free from material defects in material and workmanship for a period of thirty-six (36) months
from the date of shipment (the “Warranty Period”); (b) during the Warranty Period, the Products will materially
conform with the specification in the applicable documentation; (c) all licensed programs accompanying the
Product (the “Licensed Programs”) will materially conform with applicable specifications. ARECONT VISION
warrants to Purchaser (and only Purchaser) (the “Limited Warranty”), that: (a) each Product shall be free from
material defects in material and workmanship for a period of thirty-six (36) months from the date of shipment
(the “Warranty Period”); (b) during the Warranty Period, the Products will materially conform with the
specification in the applicable documentation; (c) all licensed programs accompanying the Product (the
“Licensed Programs”) will materially conform with applicable specifications.
ARECONT VISION warrants to Purchaser (and only Purchaser) (the “Limited Warranty”), that: (a) each
Product shall be free from material defects in material and workmanship for a period of thirty-six (36) months
from the date of shipment (the “Warranty Period”); (b) during the Warranty Period, the Products will materially
conform with the specification in the applicable documentation; (c) all licensed programs accompanying the
Product (the “Licensed Programs”) will materially conform with applicable specifications.
During the Warranty Period, the Products will materially conform with the specification in the applicable
documentation; (c) all licensed programs accompanying the Product (the “Licensed Programs”) will materially
conform with applicable specifications.
3
Contera Indoor Dome | Installation Manual
Contera Indoor Dome IP Megapixel Cameras
Camera Overview
The Contera
performance. The Contera Indoor Dome combines a day/night mechanical IR cut filter with an integrated
motorized remote focus and zoom varifocal lens for excellent, optimal image quality.
Regardless of the time of day, the Contera Indoor Dome is prepared for any lighting condition. For
applications with poor lighting conditions, Enhanced WDR™ (wide dynamic range) at 120dB provides the
best visual balance to shaded and bright light conditions.
For clear color images in low-light, NightView™ offers strong low-light sensitivity for capturing details in
extremely poor-lit scenes. Built-in Smart IR LED illumination automatically adjusts output in response to the
distance of an object in view to prevent over-exposure when the object is very close to the camera.
Arecont Vision was the first to bring H.264 to the mainstream market and recently developed SNAPstream™
(Smart Noise Adaptation and Processing) technology for reducing bandwidth without impacting image
quality. Today we are proud to offer our next generation H.265 with SNAPstream+™ smart codec capable of
delivering high quality video while saving over 50% of the data rate to reduce or prevent strain on the
network.
The SD card slot supports up to 256GB of storage capacity for convenient onboard storage. The camera’s
power can be supplied via a Power-over-Ethernet (PoE - IEEE 802.3af) compliant network cable connection.
®
Indoor Dome megapixel camera features 1080p and 5-megapixel (MP) resolution for optimum
The Contera Indoor Dome is ONVIF (Open Network Video Interface Forum) Profile S and G compliant,
providing interoperability between network video products regardless of manufacturer.
4
Contera Indoor Dome | Installation Manual
CAUTION!
Description
QTY
1. Do not attempt to service a damaged unit yourself. Refer all servicing to qualified service personnel.
2. Wiring methods shall be in accordance with the National Electrical Code/NFPA 70/ANSI, and with all
local codes and authorities having jurisdiction. Wiring should be UL Listed and/or Recognized wire
suitable for the application.
3. Always use hardware e.g. screws, anchors, bolts, locking nuts etc. which are compatible with mounting
surface and of sufficient length and construction to insure a secure mount.
Package Contents
AV02CID-100/ AV05CID-100 IP camera 1
Mounting Template 1
Accessory Pack 1
•
AV02CID-100/ AV05CID-100
5
Contera Indoor Dome | Installation Manual
•
Cables
6
Contera Indoor Dome | Installation Manual
No.
Description
Installation
1 Supplied Dry Wall Anchors
2 Supplied Screws
3 Contera Indoor Dome Camera
4 Supplied Set Screw
5 Camera Dome Cover
1. Determine a secure location to mount the camera
2. Use the template, anchors, and screws provided to prepare the mounting provisions for the camera
installation.
3. Install three supplied dry wall anchors using the supplied mounting template
4. Remove the camera dome cover by hand
5. Connect the network cable to the camera’s RJ45 connector
6. (If necessary) Install SD card on the camera
Note: You can access files in the SD card via FTP.
7. Align three supplied screws with the dry wall anchors and screw Contera Indoor Dome camera into
place.
8. To configure the camera, reference the camera discovery, set-up and configuration section.
9. Follow below instruction to adjust the Pan/ Tilt and rotate the gimbal for the desired field of view.
7
Contera Indoor Dome | Installation Manual
10. To adjust the zoom and focus, see the “Zoom and Focus” Section of this manual.
11. Install the camera dome cover back once you finish all the above steps. Please make sure you align
the marks on the camera and the dome cover.
12. Fasten a supplied screw on the dome cover to secure it.
8
Contera Indoor Dome | Installation Manual
CAUTION!
LED
Status
Description
Camera Power Up
This product should be installed by a qualified service technician in accordance with the National
Electrical Code (NEC 800 CEC Section 60) or applicable local code. Wiring methods shall be in accordance
with the National Electrical Code/NFPA 70/ANSI, and with all local codes and authorities having jurisdiction.
Wiring should be UL Listed and/or Recognized wire suitable for the application.
1. Connect the camera to a PoE port on 100Mbps network PoE switch using an Ethernet cable.
2. Connect the PoE switch to your computer’s network port using an Ethernet cable.
Green Quick Flashing Link has been established
Slow Flashing Normal operation
None None No Connection
9
Contera Indoor Dome | Installation Manual
Alarm In (Dry Contact)
Alarm Out (Dry Contact)
V sense
V sense
I sense
Alarm I/O Functions
Connect the Alarm In (DI) connector to the alarm input sensor, and connect Alarm Out (DO) connector to the
alarm output signal. To avoid any damaged, please follow the specification of the part as below:
5V±5% 3.3V±5% 10mA (max)
Reset to Factory Default
1. Press and hold the reset button for 2 to 5 seconds and release the reset button. The camera has
been reset to the factory default except the network settings.
2. Press and hold the reset button for more than 5 seconds and release the reset button. The camera
has been reset to the factory.
3. Or, user can reset the camera to factory default via camera web interface or AV IP Utility
10
Contera Indoor Dome | Installation Manual
Camera Discovery, Setup, and Configuration
For camera discovery and setup, the AV IP Utility is recommended. The software can be found at Arecont
Vision website: http://www.arecontvision.com/softwares.php
The AV IP Utility has the ability to provide multiple discovery options, including broadcast and multicast,
check the status of a camera, change camera settings, import and export camera settings via a .csv file, and
update firmware and/or hardware from virtually anywhere with a network connection.
Whether used for large installations that require an update to multiple settings, or smaller installations where
only one camera needs changed, the AV IP Utility tool is efficient and convenient for mass or single camera
uploads.
®
The AV IP Utility tool is compatible with all Contera
Arecont Vision website: http://www.arecontvision.com/softwares.php
cameras. The user manual for the software is available at
Camera Discovery
1. Locate and double click the AV IP Utility shortcut on the desktop.
2. When the AV IP Utility is launched, it will automatically search the Contera cameras on the network.
Or, you can also manually search cameras by clicking “Discovery (Multicast)”
3.
You can access the camera web user interface by typing the camera IP address on the preferred
web browser.
11
Contera Indoor Dome | Installation Manual
Web Interface Navigation
The entire menu categories are located on the top of the web interface, and clicking on any one of the
buttons will cause left side of the page to jump to the settings section for the selected button.
The following are the camera settings available on the top of the web interface:
The following are the camera settings available on the top of the web interface:
•
Image
•
Basic Image Settings
•
WDR (Wide Dynamic Range) Settings
•
IR Control
•
OSD (On-Screen Display)
•
ROI (Regions of Interest)
•
Zoom and Focus
•
Zoom/ Focus Control
•
Video
•
Main Stream Configuration
•
Sub Stream Configuration
•
Third Stream Configuration
•
Network
•
IP Assignment
•
QoS (Quality of Service)
•
UPnP (Universal Plug and Play)
•
RTSP (Real Time Streaming Protocol)
•
DDNS (Dynamic DNS)
•
SNMP (Simple Network Management Protocol)
•
SSL (Secure Sockets Layer)
•
FTP (File Transfer Protocol)
•
802.1x
•
Privacy Mask
•
Event
•
Motion Detection
•
Alarm Handler
•
Digital I/O
•
Tamper Detection
•
FTP Upload Handler
•
SMTP (Simple Mail Transfer Protocol) Notification
•
Network Storage
•
System Options
12
Loading...
+ 26 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.