Ar blue clean AR118 User Manual

Operating Instructions and Parts List AR118

Please read and save these instructions. Read carefully before attempt­ing to assemble, install, operate or maintain the product described. Pro­tect yourself and others by observing all safety information. Failure to
comply with instructions could result in personal injury and/or property
damage! Retain instructions for future reference.

Electric Pressure Washer

Specifications:

Max Max Max Unit

Model PSi GPM teMP VoltaGe aMPS WeiGht

AR118 1500 1.58 122°F 120V 11 18 lbs

Safety GuidelineS:

This manual contains information
that is very important to know
and understand. This information
is provided for SAFETY and to
PREVENT EQUIPMENT PROBLEMS.
To help recognize this information,
observe the following symbols.

Warning indicates a potentially
hazardous situation which, if not
avoided, COULD result in death or
serious injury.

Caution indicates a potentially
hazardous situation which, if not
avoided, MAY result in minor or
moderate injury.

AR118 - 112008 www.arnorthamerica.com

NOTE or NOTICE: Information that
requires special attention.

This pressure washer is equipped
with a microswitch sensitive
to water flow. This Total Stop
System (TSS) senses water flow
in the pump. When the trigger
is released, water stops flowing
through the pump. The TSS then
automatically turns the motor
off to protect the pump from
overheating.

1

iMPortant

NORTH
AMERICA

Firs t Cho ice Wh en Qua lity Matter s

Operating Instructions and Parts List AR118

1

2

4

3

7

5

8

6

6A

10

9

PackaGe content:

1. Pressure Water Unit

2. Manual

3. Adjustable Spray Nozzle

4. Lance

5. Lance Adapter

6. Gun

7. Detergent Tank

8. Nozzle Cleaning Tool

9. High Pressure Hose

10. Garden Hose Adapter

Gun Safety Button (6A)

2

www.arnorthamerica.com

Operating Instructions and Parts List AR118

oPeration

1. Pull trigger on gun.

2. Turn the “ON/OFF” switch to
“ON”.

3. Release trigger. The pressure
washer motor will stop running.

4. To spray again, pull trigger and
motor and pump will restart.

Note: Occasionally the motor may
run for a short time to bring fresh,
cool water into the pump even if
the trigger is released. This is part
of normal operation and will not
damage the unit.

Always turn

the “ON/OFF”
switch to “OFF” then trigger gun
to release hose pressure before
unplugging the power cord.

Risk of equipment

damage. Always
make sure the “ON/OFF” switch
on the unit is “OFF” and unit is
unplugged prior to storage.

Risk of Injection.

Unit will start
spraying when trigger is squeezed
if “ON/OFF” switch is in “ON”
position. Always point gun in a
safe direction.

iMPortant Safety inStrUctionS

Save These Instructions

When using this product, basic
precautions should always be
followed, including the following:

1. Read all instructions before

using the product.

2. Always disconnect power
before disassembling or
repairing the unit.

3. Follow all safety codes as well
as the Occupational Safety and
Health Act (OSHA).

4. Ensure safety devices are
operating properly before each
use. DO NOT remove or modify
any part of the gun or unit.

5. Know how to stop this product
and bleed pressure quickly. Be
thoroughly familiar with the
controls.

6. Stay alert - watch what you are
doing.

7. Do not operate the product
when fatigued or under the
influence of alcohol or drugs.

8. Keep operation area clear of all
persons.

9. Do not overreach or stand on
unstable support. Keep good
footing and balance at all
times.

10. Follow the maintenance
instructions specified in the
manual.

11. This product is provided with a
ground fault circuit interrupter,
GFCI, be sure to inspect cord
and GFCI prior to use. Any
repair or replacement of the
power cord must be performed
by a qualified (licensed or
certified) electrical technician.

12. Never use an extension cord
with this product.

13. The power cord on this product
contains chemicals, including
lead, known to the State of
California to cause [cancer
and] birth defects or other
reproductive harm. Wash
hands after handling.

3

www.arnorthamerica.com

Operating Instructions and Parts List AR118

iMPortant Safety inStrUctionS (cont)

14. To reduce the risk of injury,
close supervision is necessary
when a product is used near
children.

pressure may still exist in unit.
To discharge pressure, point
gun in safe direction and
squeeze trigger.

Risk of Explosion

Risk of

Electrocution

• Inspect cord before using - Do
not use if cord is damaged.

• Keep all electrical connections
dry and off the ground.

• Do not touch plug with wet
hands.

• This product is provided with a
ground fault circuit interrupter
built into the power cord plug.
If replacement of the plug
or cord is needed, use only
identical replacement parts.

• Do not spray electrical
apparatus and wiring.

Risk of Injection

or Sever Injury

• High pressure. Keep clear
of nozzle. Do not discharge
streams at persons or animals.

• Never put hand or fingers over
spray tip while operating the
unit.

• Never try to stop or deflect
leaks with any body part.

• Always engage the trigger
safety latch in the safe position
when spraying is stopped even
if only for a few moments.

• Point gun in safe direction.
Unit will start spraying when
trigger is squeezed if ‘on/off’
switch is in “ON” position.

• Discharge pressure - When ‘on/
off’ switch is in “OFF” position,

• Do not spray flammable liquids.

• Never use in areas containing

combustible dust, liquids, or
vapors.

• High pressure - Gun kicks back ­Hold gun with both hands.

• Keep hose away from sharp
objects. Bursting hoses may
cause injury. Examine hose
regularly and replace if
damaged. Do not attempt to
mend a damaged hose.

note

• Use only detergents specifically
formulated for pressure
washers. Always follow
detergent manufacturer’s
label recommendations for
proper use of detergents.
Always protect eyes, skin,
and respiratory system from
detergent.

• For either indoor or outdoor
use. Store indoors and where
temperature stays above
freezing.

• Unplug unit when not in use.

• Pressure washer is not meant

to pump hot water. Do not
connect to hot water supply.

• Never leave the unit
unattended while it is plugged
in.

• Always turn water supply “ON”
before turning pressure washer

4

www.arnorthamerica.com