AQUATOP 1 YEAR LIMITED WARRANTY
Products are warrantied by AQUATOP Aquatic Supplies to the original purchaser against defective material and workmanship under normal use for a period of 1 year from the date of the original purchase.
Products have no warranty if:
1.) The product has been serviced, modified or tampered with by anyone other than
AQUATOP Aquatic Supplies,
2.) The product has been abused or damaged (including broken or cracked bulbs), and/or
3.) The product has been transported without proper packaging.
WARRANTY LIABILITY DISCLAIMER
In no event will Aquatop® be liable for any consequential or incidental damages, including but not limited to, lost sea life, personal injury, property damage, equipment damage, lost profits, lost wages, lost savings, lost income, etc., arising out of the use of any Aquatop® product.
For more information on tank health and maintenance as well as other products carried by Aquatop,
visit our website: www.aquatop.com
775 Columbia St. Brea, CA 92821
Tel: (888) 915-2782 (562) 697-9860
www.aquatop.com
VI /2016
Xyclone PS-370 Protein Skimmer Manual 2016
XYCLONE
PROTEIN SKIMMER
aquatop.com |
|
OWNER’S MANUAL |
|
||
|
|
|
|
|
|
|
|
|
INTRODUCTION
Thank you for purchasing AQUATOP’s PS-370 Xyclone Protein Skimmer. Please read this instruction manual carefully before use, and save it in case it is needed for future reference.
The AQUATOP Xyclone Protein Skimmer is capable of filtering 370 Gallons per hour, making it suitable for Saltwater Aquariums up to 100 Gallons. This powerful Protein Skimmer will help clean your aquarium water by performing foam fractionation, a process that removes dissolved organic waste from your aquarium water before the waste can enter the nitrogen cycle.
The flexible design allows for a Hang-on Back application or In-sump installation, and includes a needle-wheel impeller, removable collection cup and a submersible pump.
CAUTION/SAFETY INFORMATION
1)Read and follow all instructions.
2)A drip loop must be used when plugging all electrical aquarium devices. A drip loop is the part of the cord hanging
below the receptacle. (See Fig. 1)
3)A GFCI (Ground fault circuit interrupter)
should be used in the branch circuit supplying all power to water pumps and electrical aquarium equipment. If you do not have a GFCI, we strongly recommend having a qualified electrician install one prior to operating any aquarium component.
4)Do not plug into extension cord/power strip.
5)Use this product for its intended use only.
6)Never yank or pull the cord from the electrical outlet.
7)Do not operate if the plug or wire is damaged.
8)Do not operate without water.
9)Verify that hands are dry prior to disconnecting the power.
10)To reduce the risks of electrocution, keep all connections dry.
11)If the product falls into water, do not reach for it. First, unplug the unit. Then retrieve the unit from the water. If any of the electrical components get wet, unplug immediately.
12)Do not use soaps or detergents when cleaning this device. Thoroughly clean and rinse with warm water and make sure the device is completely dry before connecting.
13)For indoor use only.
TROUBLESHOOTING
If not functioning properly, please check the following items:
1.Check that the unit is plugged in securely.
2.Inspect the venture airline and the air intake diffuser to make sure they are not clogged.
3.Adjust the outlet flow control valves.
4.Inspect the submersible pump and impeller.
5.Contact the place of original purchase or the manufacturer for additional information.
Note: All protein skimmers generally require a 1 to 2 week “Break-in Period.” During this period, the protein skimmer may discharge micro-bubbles into the aquarium (for Hang-on back applications), which is normal. These micro-bubbles will subside after the “Break-in Period” under normal operation. For additional information, please refer to the troubleshooting guide.
1 |
6 |
Loading...