MS300 Variable Speed Pump
SELF-PRIMING SWIMMING POOL PUMP
INSTALLATION AND OPERATING
INSTRUCTION MANUAL
Your Aquatight variable speed self-priming centrifugal pump has been quality-built and engineered to give you many years of efficient, dependable, corrosion
free service.
The advanced design reduces operation and maintenance to simple, common-sense procedures.
Secure pump to base with screws or bolts to reduce vibration and pipe stress.
USE ONLY AQUATIGHT GENUINE REPLACEMENT PARTS
MS300 Variable Speed Pump
30-LITINSB013 Rev-B
MS300 Variable Speed Pump
Replacement Parts
Parts Diagram
a |
|
|
|
|
|
|
|
|
|
|
|
|
4 b |
1 |
5 |
6 |
7 |
8 |
9 |
10 |
11 |
12 |
13 |
14 |
15 |
c |
|
|
|
|
|
|
|
|
|
|
|
|
3
|
|
16 |
|
2 |
17 |
|
18 |
|
Parts Listing |
|
|
Ref. No. |
Description |
Qty. Req’d |
1 |
Pump Housing/Strainer - 50mm, w/Drain Plugs, threaded style |
1 |
2 |
Basket |
1 |
3 |
Strainer Cover O-Ring |
1 |
4 |
Strainer Cover, Hand-Knob Style, Clear |
1 |
5 |
Housing Gasket |
1 |
6 |
Diffuser |
1 |
-- |
Diffuser Gasket - Not Shown |
1 |
7 |
Impeller Ring |
1 |
8 |
Impeller |
1 |
9 |
Seal Assembly |
1 |
10 |
Seal Plate |
1 |
11 |
Motor Cap Screw |
4 |
12 |
Slinger |
1 |
13 |
Motor Mounting Plate |
1 |
14 |
Housing Cap Screw |
6 |
-- |
Washer, 3/8” for Housing Cap Screw - Not Shown |
6 |
15 |
Motor |
1 |
16 |
Mounting Bracket with Adaptor and 2 Cap Screws |
1 |
17 |
Mounting Foot Cap Screws (Set of 2) |
1 |
18 |
1/4” Drain Plug with Gasket |
2 |
-- |
Hand Knob Kit for Strainer Cover (Includes Hand Knob and Swivel Nut) |
2 |
-- |
Union Kit (2) 40mm - 50mm - Super II pump - Not Shown |
1 |
-- |
Union Gasket (T-Seal) |
2 |
USE ONLY AQUATIGHT GENUINE REPLACEMENT PARTS
MS300 Variable Speed Pump