Aquatic AISM6060SY, AISM6060SYTO User Manual
60”
36”
SymPhONy 8
SymPhONy SErIES Model # AISM6060SY / AISM6060SYTo
Two Person Bath
14”
60”
2
29”
42 5/16”
42”
42 1/4”
17 1/2”
84”
SPECIFICATIONS:
GENERAL SPECIFICATIONS:
Tub Size 60” x 60” x 22”
152 cm x 152 cm x 56 cm
Bathing Well 42” long
33” wide
20” interior depth
Maximum Water Depth 15”
Shipping Weight 234 lbs. / 106 kg
Tub Weight Filled 923 lbs. / 419 kg
Tub Only Weight 173 lbs. / 78 kg
Gallons to Overow 90 gal. / 341 L
Gallons to Operate 1 bather: 65 gal. / 246 L
2 bathers: 50 gal. / 189
ELECTRICAL SPECIFICATIONS:
Pump .80 HP; 5.5 AMP; 110V
Requirement 15 AMP; 110V, separate circuit
required protected w/ Class A GFCI
1
29”
Deck Width 5”
22”
20”
18 1/2”
STANDARD EQUIPMENT:
8 Hydrotherapy Jets including:
- 4 Spinning Back Jets
- 4 Directional Jets
Aquatic Quality Features:
- .80 HP Run-Dry Pump
- Bath-Side On/Off Air Button
- Corner Seat
- ”Quiet Pad”
- Heat-bent Rigid PVC Piping for Optimum Sanitary Conditions
- 4 Arm Rests
- Color Matched Trim and Jets (Select Colors)
- Durable, Easy to Clean, Lucite® Cast Acrylic Surface
- Available in 8 Standard No-Charge Colors
UL and IAPMO Listed, Factory Tested
Limited 10 Year Warranty
Anti-Vibration Pump Mount for Quiet Pump Operation
Rough-In Plumbing
Measurements
18”
2 1/2”
OPTIONAL EQUIPMENT:
• Comfort Pillow--Oval or Rectangle
• Bolt-On Grab Bars
- White, Biscuit, Chrome, Polished Brass, Gold,
Polished Nickel, Satin Nickel or Oil Rubbed Bronze
• 1.5 kW Inline Maintenance Heater (Pump Options 1, 2)
• Lift & Turn Waste and Overow
- Chrome, Polished Brass, Gold, Satin Nickel,
Polished Nickel or Oil Rubbed Bronze
• Cable Drive Waste and Overow
- Chrome, Polished Brass, Gold, Satin Nickel,
Polished Nickel, Oil Rubbed Bronze or
Color Matched (Bone, White and Biscuit
• 2-T Integral Tile Flange
• Optional Pump Location
All acrylic colors featured by Aquatic match the
industry’s leading xture manufacturers.
Only)
Fax-On-Demand
Document # 1276
The manufacturer accepts a 1/4” variance. There are variations on each tub and specifications are subject to change as we improve upon our product as required. The dimensions needed for site preparation
and structure building should be measured from the tub; Aquatic Industries, Inc. assumes no responsibility for preparatory work.
April 2008
www.aquaticwhirlpools.com 800.555.5324
135
Loading...