Aquatic AISl7242SYTO, AISl7242SY User Manual

SymPhONy 17

SymPhONy SErIES Model # AISl7242SY / AISl7242SYTo

Deck Width 4”

20 3/4”

3

1

2

19”

24”

48”

41 3/4”

71 1/2”

SPECIFICATIONS:

GENERAL SPECIFICATIONS:

Tub Size 71 1/2” x 41 3/4” x 23 3/4”
182 cm x 105 cm x 60 cm
Bathing Well 48” long
24” wide
22” interior depth
Maximum Water Depth 16”
Shipping Weight 169 lbs. / 77 kg
Tub Weight Filled 677 lbs. / 307 kg
Tub Only Weight 119 lbs. / 54 kg

Gallons to Overow 67 gal. / 254 L
Gallons to Operate 56 gal. / 212 L

ELECTRICAL SPECIFICATIONS:

Pump .80 HP; 5.5 AMP; 110V
Requirement 15 AMP; 110V, separate circuit
required protected w/ Class A GFCI

23 3/4”

21 3/4”

19 3/4”

STANDARD EQUIPMENT:

6 Hydrotherapy Jets including:

- 2 Spinning Back Jets

- 4 Directional Jets

Aquatic Quality Features:

- .80 HP Run-Dry Pump

- Bath-Side On/Off Air Switch

- 2 Arm Rests

- ”Quiet Pad”

- Heat-bent Rigid PVC Piping for Optimum Sanitary Conditions

- Color Matched Trim and Jets (Select Colors)

- Durable, Easy to Clean, Lucite® Cast Acrylic Surface

- Available in 8 Standard No-Charge Colors

UL and IAPMO Listed, Factory Tested
Limited 10 Year Warranty

Anti-Vibration Pump Mount for Quiet Pump Operation

41 3/4”

Rough-In Plumbing
Measurements

OPTIONAL EQUIPMENT:

• Comfort Pillow--Oval or Rectangle

• Bolt-On Grab Bars

- White, Biscuit, Chrome, Polished Brass, Gold,
Polished Nickel, Satin Nickel or Oil Rubbed Bronze

• 1.5 kW Inline Maintenance Heater (Pump Options 1, 2, 3)

• Lift & Turn Waste and Overow

- Chrome, Polished Brass, Gold, Satin Nickel,
Polished Nickel or Oil Rubbed Bronze

• Cable Drive Waste and Overow

- Chrome, Polished Brass, Gold, Satin Nickel,
Polished Nickel, Oil Rubbed Bronze or
Color Matched (Bone, White and Biscuit

• Optional Pump Location

All acrylic colors featured by Aquatic match the

industry’s leading xture manufacturers.

9 1/2”

2”

Only)

Fax-On-Demand

Document # 1285

The manufacturer accepts a 1/4” variance. There are variations on each tub and specifications are subject to change as we improve upon our product as required. The dimensions needed for site preparation
and structure building should be measured from the tub; Aquatic Industries, Inc. assumes no responsibility for preparatory work.

144

www.aquaticwhirlpools.com 800.555.5324

February 2008