Aquatic AISe6030SYTO, AISe6030SY User Manual

SymPhONy 15

SymPhONy SErIES Model # AISe6030SY / AISe6030SYTo

Deck Width

2”

3

17 1/4”

17”

1

39 1/2”

2

15”

30”

59 1/2”

SPECIFICATIONS:

GENERAL SPECIFICATIONS:

Tub Size 59 1/2” x 30” x 20 1/4”
151 cm x 76 cm x 51 cm
Bathing Well 39 1/2” long
17 1/4” wide
18 5/8” interior depth
Maximum Water Depth 12 1/2”
Shipping Weight 144 lbs. / 65 kg
Tub Weight Filled 480 lbs. / 218 kg
Tub Only Weight 105 lbs. / 48 kg

Gallons to Overow 45 gal. / 170 L
Gallons to Operate 41 gal. / 155 L

ELECTRICAL SPECIFICATIONS:

Pump .80 HP; 5.5 AMP; 110V
Requirement 15 AMP; 110V, separate circuit
required protected w/ Class A GFCI

20 1/4”

18 1/2”

17”

STANDARD EQUIPMENT:

6 Hydrotherapy Jets including:

- 2 Spinning Back Jets

- 4 Directional Jets

Aquatic Quality Features:

- .80 HP Run-Dry Pump

- Bath-Side On/Off Air Button

- ”Quiet Pad”

- Heat-bent Rigid PVC Piping for Optimum Sanitary Conditions

- Color Matched Trim and Jets (Select Colors)

- Durable, Easy to Clean, Lucite® Cast Acrylic Surface

- Available in 8 Standard No-Charge Colors

UL and IAPMO Listed, Factory Tested
Limited 10 Year Warranty

Anti-Vibration Pump Mount for Quiet Pump Operation

30”

Rough-In Plumbing
Measurements

OPTIONAL EQUIPMENT:

• Comfort Pillow--Oval or Rectangle

• Bolt-On Grab Bars

- White, Biscuit, Chrome, Polished Brass, Gold,
Polished Nickel, Satin Nickel or Oil Rubbed Bronze

• Lift & Turn Waste and Overow

- Chrome, Polished Brass, Gold, Satin Nickel,
Polished Nickel or Oil Rubbed Bronze

• Cable Drive Waste and Overow

- Chrome, Polished Brass, Gold, Satin Nickel,
Polished Nickel, Oil Rubbed Bronze or
Color Matched (Bone, White and Biscuit

• 3-T Integral Tiling Flange, 4-T Integral Tiling Flange

• Optional Pump Location

• Color Matched Acrylic Skirt

All acrylic colors featured by Aquatic match the

industry’s leading xture manufacturers.

8 1/4”

2”

Only)

Fax-On-Demand

Document # 1283

The manufacturer accepts a 1/4” variance. There are variations on each tub and specifications are subject to change as we improve upon our product as required. The dimensions needed for site preparation
and structure building should be measured from the tub; Aquatic Industries, Inc. assumes no responsibility for preparatory work.

142

www.aquaticwhirlpools.com 800.555.5324

March 2008