Aquatic AIIS7242RSYTO, AIIS7242LSYTO, AIIS7242RSY, AIIS7242LSY User Manual
Right Drain Model
42”
SymPhONy 14
SymPhONy SErIES MOdeL # -- See beLOw
aiiS7242LSY / aiiS7242LSYTO (LefT drain) / aiiS7242rSY / aiiS7242rSYTO (righT drain)
21”
20”
20”
52”
43 1/4”
Standard
Pump
Location
19”
Deck Width 7”
63”
72”
SPECIFICATIONS:
GENERAL SPECIFICATIONS:
Tub Size 72” x 42” x 20 1/4”
183 cm x 107 cm x 51 cm
Bathing Well 52” long
20” wide
17” interior depth
Maximum Water Depth 13 1/4”
Shipping Weight 193 lbs. / 88 kg
Tub Weight Filled 764 lbs. / 347 kg
Tub Only Weight 148 lbs. / 67 kg
Gallons to Overow 74 gal. / 280 L
Gallons to Operate 52 gal. / 197 L
ELECTRICAL SPECIFICATIONS:
Pump .80 HP; 5.5 AMP; 110V
Requirement 15 AMP; 110V, separate circuit
required protected w/ Class A GFCI
Deck Width 5”
20 1/4”
17”
Note: Tub only model does not include
access panels unless ordered as an option.
STANDARD EQUIPMENT:
6 Hydrotherapy Jets including:
- 2 Spinning Back Jets
- 4 Directional Jets
Aquatic Quality Features:
- .80 HP Run-Dry Pump
- Bath-Side On/Off Air Button
- ”Quiet Pad”
- Heat-bent Rigid PVC Piping for Optimum Sanitary Conditions
- 2 Arm Rests
- Color Matched Integral Skirt with Removable Access Panels
- Integrally Molded Tile Flange
- Color Matched Trim and Jets (Select Colors)
- Right or Left Hand Drain
- Durable, Easy to Clean, Lucite® Cast Acrylic Surface
- Available in 8 Standard No-Charge Colors
UL and IAPMO Listed, Factory Tested
Limited 10 Year Warranty
Anti-Vibration Pump Mount for Quiet Pump Operation
43 1/4”
42”
Rough-In Plumbing
Measurements
2 1/4”
OPTIONAL EQUIPMENT:
• Comfort Pillow--Oval or Rectangle
• Lift & Turn Waste and Overow
- Chrome, Polished Brass, Gold, Satin Nickel,
Polished Nickel or Oil Rubbed Bronze
• Cable Drive Waste and Overow
- Chrome, Polished Brass, Gold, Satin Nickel,
Polished Nickel, Oil Rubbed Bronze or
Color Matched (Bone, White and Biscuit
• Removable Access Panels (Tub Only)
All acrylic colors featured by Aquatic match the
industry’s leading xture manufacturers.
8 5/8”
Only)
Fax-On-Demand
Document # 1282
The manufacturer accepts a 1/4” variance. There are variations on each tub and specifications are subject to change as we improve upon our product as required. The dimensions needed for site preparation
and structure building should be measured from the tub; Aquatic Industries, Inc. assumes no responsibility for preparatory work.
October 2007
www.aquaticwhirlpools.com 800.555.5324
141
Loading...