AquaMetrix P585, R585 Data sheet
Aquametrix Model P585/R585
Water Analytics
Aqua
by
Water Analytics
Aqua
Metrix
Combination Style pH or ORP Probes
Features
• Easy in: no special tools
• Easy out: no twisted cable
• Variable insertion length
• Compact: mounts in 3/4” pipe
• Universal style: Flow-
through and submersion.
• Automatic temperature
compensation available
• Industrial-grade quality at low cost
Description
These industrial combination
pH or ORP probes use the
conventional measurement
technique employing a process
pH glass electrode (platinum
for ORP) which is compared to
a reference electrode in KCL
solution.
These combination probes
provide an economical
alternative to higher cost
models. The durable materials
wetted by the process provide
excellent chemical resistance.
The convertible design of
these probes allows them
to be used in ow-through
and submersion applications
thus minimizing inventory
requirements. The probes
are offered with or without
temperature compensation.
These models are installed
with a 3/4” MNPT compression
tting. With this design
the probe does not screw
into the process line but is
simply inserted through the
compression tting. This allows
a variable insertion depth from
3/4” to 4-1/4”. Probe cleaning
and system calibration is
greatly facilitated.
The 585 series probes can
be directly connected to the
Shark,
SharkTX/P and 2200P/R
analyzers, provided the
instrument is within the reach
of the 3 meter (10 feet) sensor
cable. For longer transmission
distance, preampliers suitable
for automatic and xed
temperature compensation
are available. Refer to the next
pagefor more details.
Applications
• Process Control
• Industrial and Municipal Water
Treatment
• Industrial and Municipal Waste
Treatment and Neutralization
• Fume Scrubbers
• Plating
• Circuit Board Manufacturing
• Food and Beverage
• Chemical Processing
• Pulp and Paper
• Mining
• Power Generation
• Pharmaceutical Industry
by
Andover, MA 01810
Toll free - 855-747-7623
www.WaterAnalytics.net
Metrix
100 School Street
978-749-9949
Model P585/R585 Combination Style pH or ORP Probes
Technical Data
Measuring Range
pH 0 to 14 pH (Consult factory for applica-
ORP -1000 to +1000 mV
Wetted Materials CPVC body, ceramic junction, glass elec-
Temperature Limits -5 to 80°C (23 to 176°F)
Maximum Pressure 100 psig to 65°C
Maximum Flow Rate 3 meters (10 ft.) per second
Automatic Temperature Compensation
Maximum Flow Rate 3 metres (10 ft.) per sec
tions below 2 or above 12).
trode, EPDM (plus platinum for ORP)
Standard in P585K only (Analyzer Dependent)
Dimensions
Stability
pH 0.05 pH per day, non-cumulative
ORP 3.0 mV per day, non-cumulative
Sensitivity
pH 0.01 pH unit
ORP 1.0 mV
Output Impedance
pH 250 Megaohms (typical)
ORP 2.0 Megaohms (typical)
Sensor Cable 3 metres (10 ft.) coaxial, terminated
with a spade lug for active electrode,
other wires tinned
Related Products
CABLES & ACCESORIES
JB1 NEMA 4X junction box
101-A Encapsulated preampli-
101-A-BNC Encapsulated preamplier with BNC
C42-5P-XX X
CALIBR ATION SOLUTIONS
A35-13 pH 4 Buffer, 500 mL.
A35-14 pH 7 Buffer, 500 mL
A35-24 pH 10 Buffer, 500 mL
A35-40 ORP Buffer, 200 mV, 500 mL
A35-41 ORP Buffer, 600 mV, 500 mL
with junction box
er in NEMA 4X enclosure
connection in NEMA 4X enclosure
Interconnect cable - Dressed both
ends - Specify heights in order
Ordering Information
P575/P575- BNC Industrial Combination pH probe for ow-through or
submersion application without temperature compensation. BNC connector is available as an option.
P575K1 Industrial Combination pH probe for ow-through
or submersion application with automatic temperature compensation. Compatible with Shark
and SharkTX/P analyzers only. (PT1000 RTD)
P575K2 Industrial Combination pH probe for ow-through
or submersion application with automatic temperature compensation. (300 ohm NTC)
R575/R575- BNC Industrial Combination ORP electrode for ow-
through or submersion application. BNC connector
is available as an option.
www.WaterAnalytics.net 978-749-9949 Toll free - 855-747-7623 (855-pHProbe)
Loading...