AquaMetrix P575, R575 Data sheet

Aquametrix Combination Style

Water Analytics

Aq ua

by

Water Analytics

Aqua

Metrix

pH and ORP Sensors

Model P575 (pH)
Model R575 (ORP)

Features

• Fixed insertion depth

• Industrial-grade quality

• Convertible design allows for

flow-through and submersion use

• 1000Ω RTD temperature

element included

• Mounts from either end in

standard 1” FNPT fittings

• Durable CPVC shell provides

excellent chemical resistance

Description

These industrial combination pH or ORP
sensors use the conventional measurement
technique, employing a process pH glass
electrode (platinum for ORP) which is com­pared to a reference electrode in KCL solu­tion.

For relatively clean water they are an eco­nomical alternative to our flagship differential
60/65 series probe.

Our combination sensors have been com­pletely modernized with several major up­grades.

A durable CPVC shell material provides ex­cellent chemical resistance, and temperature
compensation (PT1000RTD) is now a stan­dard option.

The temperature element is now embed­ded in the glass electrode for a faster re­sponse. One cable now includes both pairs
of wires for process and temperature output.

The reference chamber now contains a
rugged ceramic double junction, replacing
the single junction used in the past. This re­sults in an approximate doubling of the sen­sor’s lifespan.

The dual-threaded, 1” fixed-insertion de­sign of these probes allows them to be used
in both flow-through and submersion ap­plications, minimizing specialized inventory

requirements.

These sensors are available with an op­tional screw-on electrode protector for sub­mersion mount use (AM-PTR-5). It is easily
removed for flow-through installations when
the probe is mounted to a tee. The sensor
can also be mounted on a submersion arm
(AM-ARM-5) for hard-to-reach applications.

The 575 series probes can be directly con­nected to the AM-2250 TX transmitter or AM­2250 controller, as well as to all legacy lines of
Aquametrix analyzers. For ease of installation,
the analyzer must be located within reach of
the 15 ft (4.5 m) standard sensor cable. Non­standard cable lengths are also available;
however, a preamplifier is required for trans­mission distances greater than 50ft.

An alternative model is installed with a 3/4”
MNPT compression fitting. With this design,
the probe does not screw into the process
line, but is simply inserted through the com­pression fitting. Probe cleaning and system
calibration has never been easier. To order
this style, ask for data sheet P/R585.

For industrial or municipal wastewater ap­plications, AquaMetrix differential sensors still
provide the lowest lifetime cost of ownership.

Applications

• Process Control

• Industrial and Municipal Water

Treatment

• Circuit Board Manufacturing

• Mining

• Power Generation

• Food and Beverage

• Aquaculture

• Agriculture

by

100 School Street

Andover, MA 01810

Toll free - 855-747-7623

www.WaterAnalytics.net

Me trix

978-749-9949

Model P575 and R575 Combination Style pH or ORP Sensors

Technical Data

Measuring Range

pH 0 to 14 pH (Consult factory for ap-

plications below 2 or above 12).

ORP -1000 to +1000 mV

Wetted Materials CPVC body, polycarbonate (or epoxy), ceramic

junction, silicone rubber, glass electrode, EPDM
Optional: platinum for ORP, teflon for
HF-resistant pH, antimony for HFA

Temperature Limits 23 to 176°F (-5 to 80°C) at amospheric pressure

Maximum Pressure 100 psig at 150°F (65°C)

Maximum Flow Rate 10 ft. (3 meters) per second

Automatic Tempera­ture Compensation

Standard PT1000Ω RTD
Optional ATC: 300 NTC, pt100Ω RTD, 3000 NTC

Dimensions

Stability

pH 0.05 pH per day, non-cumulative

ORP 3.0 mV per day, non-cumulative

Sensitivity

pH 0.01 pH unit

ORP 0.1 mV

Accuracy

pH ± 0.02 pH

ORP ± 5 mV

Sensor Cable Default length 15 ft (4.5m)

dual coaxial, tinned wires
Up to 50ft cable available
Optional BNC connectors

Related Products

ANALYZERS

AM-2250 Multi-Parameter Controller

AM-2250TX Multi-Parameter Transmitter

ACCESORIES

AM-ARM-5 Submersion mounting arm, 4ft

AM-PTR-5 Electrode protector, CPVC

CALIBRATION SOLUTIONS

AM-PH4-1P pH 4 Buffer, 1 pint (500 mL)
AM-PH7-1P pH 7 Buffer, 1 pint (500 mL)
AM-PH10-1P pH 10 Buffer, 1 pint (500 mL)
AM-R200-1P ORP Buffer, 200 mV, 1 pint (500 mL)
AM-R600-1P ORP Buffer, 600 mV, 1 pint (500 mL)

DIFFERENTIAL SENSORS

P60R8-015 Differential pH sensor with 1-1/2” NPT
R60R8-015 Differential ORP sensor with 1-1/2” NPT

Ordering Information

P575T1-015 Standard Industrial Combination pH probe

for flow-through or submersion application
with pt1000RTD temperature compensa­tion device and 15 ft dual coaxial cable

R575T1-015 Standard Industrial Combination ORP probe

for flow-through or submersion application
with pt1000RTD temperature compensa­tion device and 15 ft dual coaxial cable

P575HF1-015

P575HFA-015 Industrial Combination pH probe for ap-

Industrial Combination pH probe for applica­tions with low concetration (<2%) of HF acid.
Flow-through or submersion application
with pt1000RTD temperature compensa­tion device and 15 ft dual coaxial cable

plications with <5% HF acid. Flow-through
or submersion application. Single junc­tion with no temperature compensation
device and 15 ft dual coaxial cable

www.WaterAnalytics.net 978-749-9949 Toll free - 855-747-7623 (855-pHProbe)