AquaMetrix P60R5, P65R5, R60R5, R65R5 Data sheet

AquaMetrix 1” Dierential Style

Water Analytics

Aq ua

by

Water Analytics

Aqua

Metrix

pH and ORP Sensors

P60R5 and P65R5 (pH)

R60R5 and R65R5 (ORP)

Features

• Low cost of ownership

• Replaceable Salt Bridge

• Flat face electrode is standard

• Encapsulated preamplifier

transmit up to 2,000 ft

• Chemically resistant PPS body

• Universal style: flow-

through and submersion

• Temperature output (60-series)

• 4-20mA output (65-series)

Description

The new and improved one inch sensor
is the latest additions to the legendary
AquaMetrix differential probe family. The
1” version is now comes in distinctive blue
PPS (Ryton®) for superior resistance to
chemical and mechanical weathering.

The replaceable salt bridge has been
completely redesigned for this series - no
special tools required! Simply grab a #3
Philips screwdriver or 1/2” wrench and
rejuvenate your sensor in seconds.

The improved, universal flat-faced glass
process electrode is specially designed
for tough applications. A larger surface
area guarantees quick readings and
outstanding performance, and a self­cleaning flush fit when installed inline
ensures upkeep will be minimal. The
process electrode is now encased in a
protective layer of PPS offering increased
resistance to physical damage compared
to previous versions.

All of our 60 and 65-series probes
are dependable industrial grade
sensors designed to provide accurate
measurement and longer service life
under the most demanding conditions.
The new R5-series incorporates all the
benefits of differential measurement
found in other models of the 60 series,
field proven in thousands of installations.

Differential measurement technology
uses two glass electrodes to make the
measurement differentially with respect
to a third metal electrode. The resulting
true differential measurement has several
advantages over conventional probes:
ground loop problems are virtually
eliminated and the probe can be restored
to factory condition at modest cost by
replacing the salt bridge and reference
solution.

Automatic temperature compensation
is accomplished through the use of
a thermistor at the tip of the probe.
This thermistor placement provides
rapid response for process temperature
variations.

The new version of this sensor is
compatible with any off-the-shelf 1”
NPT fittings, and serves as a drop-in
replacement in fittings designed for the
previous iteration.

The encapsulated preamplifier in
60-series provides an output signal
which can be transmitted 2,000 feet over
inexpensive cable. Our 65-series of this
sensor encapsulates a blind 4-20 mA two
wire transmitter which can transmit a
virtually unlimited distance over a twisted
pair cable.

Applications

• Process Control

• Industrial and Municipal Waste

Treatment and Neutralization

• Fume Scrubbers

• Plating

• Circuit Board Manufacturing

• Mining

• Power Generation

• Food and Beverage

• Aquaculture

• Agriculture

by

Andover, MA 01810

Toll free 855-pH Probe

www.WaterAnalytics.net

Me trix

100 School Street

978-749-9949

(855-747-7623)

P60R5 and P65R5 (pH ), R60R5 and R65R5 (ORP) Dierential Sensors

Technical Data

Measuring Range

pH 0 to 14 pH

ORP -1000 to +1000 mV

Wetted Materials Ryton® (PPS) body, ceramic junction,

glass electrode, Viton®, Titanium
Optional: platinum for ORP

Temperature Limits 23 to 203°F (-5 to 95°C) at amospheric pressure

Maximum Pressure 100 psig at 150°F ( 65°C)

Maximum Flow Rate 10 ft. (3 meters) per second

Automatic Tempera­ture Compensation

60-series: 300 Ω thermistor
65-series: 10k Ω thermistor

Dimensions

Stability

pH 0.03 pH per day, non-cumulative

ORP 2.0 mV per day, non-cumulative

Sensitivity

pH 0.01 pH unit

ORP 0.1 mV

Accuracy

pH ± 0.02 pH

ORP ± 5 mV

Sensor Cable Default length 15 ft (4.5m)

60-series: 5-wire shielded
65-series: 2-wire

Related Products

ANALYZERS

AM-2250 Multi-Parameter Controller

AM-2250TX Multi-Parameter Transmitter

AM-2300 Multi-Input Controller (for 65-series)

ACCESORIES

AM-TEE-5 2” Union TEE with adapter

AM-ARM-5 Submersion Arm

AM-PTR-5 Electrode Protector

AM-JET-5 Jet Cleaner

AM-SFL-5 2” Sanitary Flange

CALIBRATION SOLUTIONS

AM-PH4-1P pH 4 Buffer, 1 pint (500 mL)
AM-PH7-1P pH 7 Buffer, 1 pint (500 mL)
AM-PH10-1P pH 10 Buffer, 1 pint (500 mL)
AM-R200-1P ORP Buffer, 200 mV, 1 pint (500 mL)
AM-R600-1P ORP Buffer, 600 mV, 1 pint (500 mL)

Ordering Information

P60R5-015 Raw output industrial differential pH sensor

for flow-through or submersion application.
Compatible with AM-2250 and all legacy
AquaMetrix analyzers. Standard 15 ft cable.

R60R5-015 Raw output industrial differential ORP sensor

for flow-through or submersion application.
Compatible with AM-2250 and all legacy
AquaMetrix analyzers. Standard 15 ft cable.

P65R5-015

R65R5-015 Analog output (4-20mA) industrial differential

Analog output (4-20mA) industrial differential
pH sensor for flow-through or submersion
application. Compatible with AM-2300 and any
PLC with 4-20mA input. Standard 15 ft cable.

ORP sensor for flow-through or submersion
application. Compatible with AM-2300 and any
PLC with 4-20mA input. Standard 15 ft cable.

www.WaterAnalytics.net 978-749-9949 Toll free - 855-747-7623 (855-pHProbe)